ifMauDefaultType
IEEE8023-MAU-MIB ·
.1.3.111.2.802.3.1.13.1.2.1.1.10
Object
This object identifies the default
administrative baseband MAU type to be used in
conjunction with the operational MAU type
denoted by ifMauType.
The set of possible values for this object is
the same as the set defined for the ifMauType
object.
This object represents the
administratively-configured type of the MAU. If
Auto-Negotiation is not enabled or is not
implemented for this MAU, the value of this
object determines the operational type of the
MAU. In this case, a set to this object will
force the MAU into the specified operating mode.
If Auto-Negotiation is implemented and enabled
for this MAU, the operational type of the MAU
is determined by Auto-Negotiation, and the value
of this object denotes the type to which the MAU
will automatically revert if/when
Auto-Negotiation is later disabled.
It may be necessary to provide for underlying hardware
implementations which do not follow the exact behavior
specified above.
In particular, when ifMauAutoNegAdminStatus transitions
from enabled to disabled, the agent implementation shall
verify that the operational type of the MAU
(as reported by ifMauType) correctly transitions to
the value specified by this object, rather than
continuing to operate at the value earlier
determined by the Auto-Negotiation function.
Context
- MIB
- IEEE8023-MAU-MIB
- OID
.1.3.111.2.802.3.1.13.1.2.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ifMauEntry
- Table
- ifMauTable
- Siblings
- 30
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifMauIfIndex This variable uniquely identifies the interface
to which the MAU described by this entry is
connected. | column | IF-MIBInterfaceIndex | .1.3.111.2.802.3.1.13.1.2.1.1.1 |
| ifMauAutoNegSupported This object indicates whether or not
Auto-Negotiation is supported on this MAU. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.13.1.2.1.1.11 |
| ifMauTypeListBits A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If Auto-Negotiation is present on this MAU, this
object will map to ifMauAutoNegCapabi… | column | IANA-MAU-MIBIANAifMauTypeListBits | .1.3.111.2.802.3.1.13.1.2.1.1.12 |
| ifMauHCFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU types, this counter will
indicate zero. This counter … | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.13.1.2.1.1.13 |
| ifMauPCSCodingViolations Generalized nonresettable counter. This counter
has a maximum increment rate of 25 000 000
counts per second for 100 Mb/s implementations and
125 000 000 counts per second for 1… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.13.1.2.1.1.14 |
| ifMauFECAbility A read-only value that indicates if the
PHY supports an optional FEC sublayer for
forward error correction (see IEEE Std 802.3, 65.2
and IEEE Std 802.3, Clause 74).
… | column | Enumeration | .1.3.111.2.802.3.1.13.1.2.1.1.15 |
| ifMauFECMode A read-write value that indicates the mode of
operation of the optional FEC sublayer for forward
error correction (see IEEE Std 802.3, 65.2 and
IEEE Std 802.3, Clause 74).
… | column | Enumeration | .1.3.111.2.802.3.1.13.1.2.1.1.16 |
| ifMauFECCorrectedBlocks deprecated ********** THIS OBJECT IS DEPRECATED **********
Generalized nonresettable counter. This counter
has a maximum increment rate of 1 200 000
counts per second for 100… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.13.1.2.1.1.17 |
| ifMauFECUnCorrectableBlocks deprecated ********** THIS OBJECT IS DEPRECATED **********
Generalized nonresettable counter. This counter
has a maximum increment rate of 1 200 000
counts per second for 100… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.13.1.2.1.1.18 |
| ifMauSNROpMarginChnlA The current SNR operating margin measured at the
slicer input for channel A for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range o… | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.19 |
| ifMauIndex This variable uniquely identifies the MAU
described by this entry from among other MAUs
connected to the same interface (ifMauIfIndex). | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.2 |
| ifMauSNROpMarginChnlB The current SNR operating margin measured at the
slicer input for channel B for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range o… | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.20 |
| ifMauSNROpMarginChnlC The current SNR operating margin measured at the
slicer input for channel C for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range o… | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.21 |
| ifMauSNROpMarginChnlD The current SNR operating margin measured at the
slicer input for channel D for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range o… | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.22 |
| ifMauEEESupportList A read-only list of the possible PHY types for which
the underlying system supports Energy-Efficient Ethernet
(EEE) as defined in IEEE Std 802.3 Clause 78. | column | IANA-MAU-MIBIANAifMauTypeListBits | .1.3.111.2.802.3.1.13.1.2.1.1.23 |
| ifMauEEELDFastRetrainCount A count of the number of 10GBASE-T fast retrains
initiated by the local device. The indication reflects
the state of the PHY event counter (see IEEE Std 802.3,
45.2.1.78.2 and … | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.24 |
| ifMauEEELPFastRetrainCount A count of the number of 10GBASE-T fast retrains
initiated by the link partner. The indication reflects
the state of the PHY event counter (see IEEE Std 802.3,
45.2.1.78.1 and … | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.25 |
| ifMauTimeSyncCapabilityTX This object indicates whether or not transmit
Time Sync is supported on this MAU. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.13.1.2.1.1.26 |
| ifMauTimeSyncCapabilityRX This object indicates whether or not receive
Time Sync is supported on this MAU. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.13.1.2.1.1.27 |
| ifMauTimeSyncDelayTXmax The maximum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.
If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, D… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.13.1.2.1.1.28 |
| ifMauTimeSyncDelayTXmin The minimum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.
If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, D… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.13.1.2.1.1.29 |
| ifMauType This object identifies the MAU type. Values for
standard IEEE 802.3 MAU types are defined in the
IANA maintained IANA-MAU-MIB module, as
OBJECT-IDENTITIES of dot3MauType.
If the M… | column | SNMPv2-TCAutonomousType | .1.3.111.2.802.3.1.13.1.2.1.1.3 |
| ifMauTimeSyncDelayRXmax The maximum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.
If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, D… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.13.1.2.1.1.30 |
| ifMauTimeSyncDelayRXmin The minimum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.
If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, D… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.13.1.2.1.1.31 |
| ifMauStatus The current state of the MAU. This object may
be implemented as a read-only object by those
agents and MAUs that do not implement software
control of the MAU state. Some agents ma… | column | Enumeration | .1.3.111.2.802.3.1.13.1.2.1.1.4 |
| ifMauMediaAvailable This object identifies Media Available state of
the MAU, complementary to the ifMauStatus. Values
for the standard IEEE 802.3 Media Available states
are defined in the IANA mainta… | column | IANA-MAU-MIBIANAifMauMediaAvailable | .1.3.111.2.802.3.1.13.1.2.1.1.5 |
| ifMauMediaAvailableStateExits A count of the number of times that
ifMauMediaAvailable for this MAU instance leaves
the state available(3).
Discontinuities in the value of this counter can
occur … | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.6 |
| ifMauJabberState The value other(1) is returned if the jabber
state is not 2, 3, or 4. The agent shall
return other(1) for MAU type dot3MauTypeAUI.
The value unknown(2) is returned … | column | Enumeration | .1.3.111.2.802.3.1.13.1.2.1.1.7 |
| ifMauJabberingStateEnters A count of the number of times that
mauJabberState for this MAU instance enters the
state jabbering(4). This counter will
indicate zero for MAUs of type dot3MauTypeAUI
and those o… | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.8 |
| ifMauFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU types, this counter will
indicate zero. This counter … | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.9 |