ifMauStatus
IEEE8023-MAU-MIB ·
.1.3.111.2.802.3.1.13.1.2.1.1.4
Object
column
r/w
Enumeration
The current state of the MAU. This object may
be implemented as a read-only object by those
agents and MAUs that do not implement software
control of the MAU state. Some agents may not
support setting the value of this object to some
of the enumerated values.
The value other(1) is returned if the MAU is in
a state other than one of the states 2 through
6.
The value unknown(2) is returned when the MAU's
true state is unknown; for example, when it is
being initialized.
A MAU in the operational(3) state is fully
functional; it operates, and passes signals to its
attached DTE or repeater port in accordance to
its specification.
A MAU in standby(4) state forces DI and CI to
idle and the media transmitter to idle or fault,
if supported. Standby(4) mode only applies to
link type MAUs. The state of
ifMauMediaAvailable is unaffected.
A MAU in shutdown(5) state assumes the same
condition on DI, CI, and the media transmitter,
as though it were powered down or not connected.
The MAU may return other(1) value for the
ifMauJabberState and ifMauMediaAvailable objects
when it is in this state. For an AUI, this
state will remove power from the AUI.
Setting this variable to the value reset(6)
resets the MAU in the same manner as a
power-off, power-on cycle of at least one-half
second would. The agent is not required to
return the value reset(6).
Setting this variable to the value
operational(3), standby(4), or shutdown(5)
causes the MAU to assume the respective state,
except that setting a mixing-type MAU or an AUI
to standby(4) will cause the MAU to enter the
shutdown state.
Context
- MIB
- IEEE8023-MAU-MIB
- OID
.1.3.111.2.802.3.1.13.1.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ifMauEntry
- Table
- ifMauTable
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | unknown |
3 | operational |
4 | standby |
5 | shutdown |
6 | reset |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifMauIfIndex This variable uniquely identifies the interface
to which the MAU described by this entry is
connected. | column | IF-MIBInterfaceIndex | .1.3.111.2.802.3.1.13.1.2.1.1.1 |
| ifMauDefaultType This object identifies the default
administrative baseband MAU type to be used in
conjunction with the operational MAU type
denoted by ifMauType.
The set of possibl… | column | SNMPv2-TCAutonomousType | .1.3.111.2.802.3.1.13.1.2.1.1.10 |
| ifMauAutoNegSupported This object indicates whether or not
Auto-Negotiation is supported on this MAU. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.13.1.2.1.1.11 |
| ifMauTypeListBits A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If Auto-Negotiation is present on this MAU, this
object will map to ifMauAutoNegCapabi… | column | IANA-MAU-MIBIANAifMauTypeListBits | .1.3.111.2.802.3.1.13.1.2.1.1.12 |
| ifMauHCFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU types, this counter will
indicate zero. This counter … | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.13.1.2.1.1.13 |
| ifMauPCSCodingViolations Generalized nonresettable counter. This counter
has a maximum increment rate of 25 000 000
counts per second for 100 Mb/s implementations and
125 000 000 counts per second for 1… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.13.1.2.1.1.14 |
| ifMauFECAbility A read-only value that indicates if the
PHY supports an optional FEC sublayer for
forward error correction (see IEEE Std 802.3, 65.2
and IEEE Std 802.3, Clause 74).
… | column | Enumeration | .1.3.111.2.802.3.1.13.1.2.1.1.15 |
| ifMauFECMode A read-write value that indicates the mode of
operation of the optional FEC sublayer for forward
error correction (see IEEE Std 802.3, 65.2 and
IEEE Std 802.3, Clause 74).
… | column | Enumeration | .1.3.111.2.802.3.1.13.1.2.1.1.16 |
| ifMauFECCorrectedBlocks deprecated ********** THIS OBJECT IS DEPRECATED **********
Generalized nonresettable counter. This counter
has a maximum increment rate of 1 200 000
counts per second for 100… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.13.1.2.1.1.17 |
| ifMauFECUnCorrectableBlocks deprecated ********** THIS OBJECT IS DEPRECATED **********
Generalized nonresettable counter. This counter
has a maximum increment rate of 1 200 000
counts per second for 100… | column | SNMPv2-SMICounter64 | .1.3.111.2.802.3.1.13.1.2.1.1.18 |
| ifMauSNROpMarginChnlA The current SNR operating margin measured at the
slicer input for channel A for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range o… | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.19 |
| ifMauIndex This variable uniquely identifies the MAU
described by this entry from among other MAUs
connected to the same interface (ifMauIfIndex). | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.2 |
| ifMauSNROpMarginChnlB The current SNR operating margin measured at the
slicer input for channel B for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range o… | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.20 |
| ifMauSNROpMarginChnlC The current SNR operating margin measured at the
slicer input for channel C for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range o… | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.21 |
| ifMauSNROpMarginChnlD The current SNR operating margin measured at the
slicer input for channel D for the 10GBASE-T PMA.
It is reported in units of 0.1 dB to an accuracy of
0.5 dB within the range o… | column | Integer32 | .1.3.111.2.802.3.1.13.1.2.1.1.22 |
| ifMauEEESupportList A read-only list of the possible PHY types for which
the underlying system supports Energy-Efficient Ethernet
(EEE) as defined in IEEE Std 802.3 Clause 78. | column | IANA-MAU-MIBIANAifMauTypeListBits | .1.3.111.2.802.3.1.13.1.2.1.1.23 |
| ifMauEEELDFastRetrainCount A count of the number of 10GBASE-T fast retrains
initiated by the local device. The indication reflects
the state of the PHY event counter (see IEEE Std 802.3,
45.2.1.78.2 and … | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.24 |
| ifMauEEELPFastRetrainCount A count of the number of 10GBASE-T fast retrains
initiated by the link partner. The indication reflects
the state of the PHY event counter (see IEEE Std 802.3,
45.2.1.78.1 and … | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.25 |
| ifMauTimeSyncCapabilityTX This object indicates whether or not transmit
Time Sync is supported on this MAU. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.13.1.2.1.1.26 |
| ifMauTimeSyncCapabilityRX This object indicates whether or not receive
Time Sync is supported on this MAU. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.13.1.2.1.1.27 |
| ifMauTimeSyncDelayTXmax The maximum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.
If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, D… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.13.1.2.1.1.28 |
| ifMauTimeSyncDelayTXmin The minimum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.
If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, D… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.13.1.2.1.1.29 |
| ifMauType This object identifies the MAU type. Values for
standard IEEE 802.3 MAU types are defined in the
IANA maintained IANA-MAU-MIB module, as
OBJECT-IDENTITIES of dot3MauType.
If the M… | column | SNMPv2-TCAutonomousType | .1.3.111.2.802.3.1.13.1.2.1.1.3 |
| ifMauTimeSyncDelayRXmax The maximum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.
If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, D… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.13.1.2.1.1.30 |
| ifMauTimeSyncDelayRXmin The minimum data delay as specified in IEEE Std 802.3
90.7, expressed in units of ns.
If an IEEE Std 802.3 Clause 45 MDIO Interface to
PMA/PMD, WIS, PCS, PHY XS, D… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.13.1.2.1.1.31 |
| ifMauMediaAvailable This object identifies Media Available state of
the MAU, complementary to the ifMauStatus. Values
for the standard IEEE 802.3 Media Available states
are defined in the IANA mainta… | column | IANA-MAU-MIBIANAifMauMediaAvailable | .1.3.111.2.802.3.1.13.1.2.1.1.5 |
| ifMauMediaAvailableStateExits A count of the number of times that
ifMauMediaAvailable for this MAU instance leaves
the state available(3).
Discontinuities in the value of this counter can
occur … | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.6 |
| ifMauJabberState The value other(1) is returned if the jabber
state is not 2, 3, or 4. The agent shall
return other(1) for MAU type dot3MauTypeAUI.
The value unknown(2) is returned … | column | Enumeration | .1.3.111.2.802.3.1.13.1.2.1.1.7 |
| ifMauJabberingStateEnters A count of the number of times that
mauJabberState for this MAU instance enters the
state jabbering(4). This counter will
indicate zero for MAUs of type dot3MauTypeAUI
and those o… | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.8 |
| ifMauFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU types, this counter will
indicate zero. This counter … | column | SNMPv2-SMICounter32 | .1.3.111.2.802.3.1.13.1.2.1.1.9 |