HUAWEI-VOIP-H248-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
226

hwH248MedGwyConfigTable

table
.1.3.6.1.4.1.2011.6.36.1.1 · 1 row entry · 53 columns
Open in standard view 
This table is used to manage H248 media gateway.
The index of this table is hwH248MedGwyId.
hwH248MedGwyConfigEntry entry .1.3.6.1.4.1.2011.6.36.1.1.1
This table is used to manage H248 media gateway.
The index of this entry is hwH248MedGwyId.
Indexes
hwH248MedGwyId
Column Syntax OID
hwH248MedGwyId
Media Gateway ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.1.1.1
hwH248MedGwyDomainName
Indicates the domain name of the MG, null means clear the value of this parameter.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.1.1.2
hwH248MedGwyDesc
Indicates the interface description.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.36.1.1.1.3
hwH248MedGwySigIPAddress1
Indicates the signaling IP address of the MG.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.1.1.4
hwH248MedGwyIPAddress2
The second IP address that the Media Gateway Controller will use to communicate with the Media Gateway.
The system does not support setting it now.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.1.1.5
hwH248MedGwySigUDPPort
Signalling UDP port that the Media Gateway Controller will use to communicate with the Media Gateway.
65535 means this parameter is not configurated.
Integer32r/w
Constraints:
range: 2900-2999
range: 65535-65535
 .1.3.6.1.4.1.2011.6.36.1.1.1.6
hwH248MedGwyProtocol
Type of the control protocol in use.
Options:
1. h248(1) -H.248
Enumeration
Enumerated Values:
1h248
 .1.3.6.1.4.1.2011.6.36.1.1.1.7
hwH248MedGwyCodeType
Indicates the coding type.
Options:
1. txt(1) -text
2. bin(2) -binary
Enumerationr/w
Enumerated Values:
1txt
2bin
 .1.3.6.1.4.1.2011.6.36.1.1.1.8
hwH248MedGwyTransMode
Indicates the transmission mode.
Options:
1. noConfig(-1) -not configured
2. tcp(1) -tcp
3. udp(2) -udp
4. alf-udp(3) -udp with alf
5. sctp(4) -sctp
Enumerationr/w
Enumerated Values:
-1noConfig
1tcp
2udp
3alf-udp
4sctp
 .1.3.6.1.4.1.2011.6.36.1.1.1.9
hwH248MedGwyRegisterKey
Indicates the key that is registered with the MGC. The key cannot be modified, read, or written by the operator without authority, so the hwH248MedGwyRegisterKey and hwH248MedGwyOperKey must be also provided to query an…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.36.1.1.1.10
hwH248MedGwyOperKey
Indicates the key for operating the MG. The hwH248MedGwyOperKey cannot be read. The functions of this key are as follows: 1) The hwH248MedGwyRegisterKey and hwH248MedGwyOperKey must be provided for modifying the hwH248M…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.36.1.1.1.11
hwH248MedGwyOperKeyNew
Indicates the new operation key. The hwH248MedGwyOperKeyNew is a temporary variable, and cannot be read. If you query one hwH248MedGwyOperKeyNew, the system always returns a null value.
This parameters must be 8..32 cha…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.6.36.1.1.1.12
hwH248MedGwyAdminStatus
Administrative status for this media gateway control group.
The default reason code relates to the status is as follows:
reset -- ColdBoot(901)
shutdown force -- TerminationTakenOutOfService(905)
…
Enumerationr/w
Enumerated Values:
1up
2down
3resetrestortserve
4reset
5shutdownforce
6shutdowngraceful
 .1.3.6.1.4.1.2011.6.36.1.1.1.13
hwH248MedGwyOperStatus
Current operational status of the signaling link.
Options:
1. up(1) -normal
2. local-closed(2) -local closed
3. fault(3) -fault
4. waiting-ack(4) -wating for ack
5. unknown(5) -unknown
6. not-start(6) -not start
7. remo…
Enumeration
Enumerated Values:
1up
2local-closed
3fault
4waiting-ack
5unknown
6not-start
7remote-closed
8graceful-closed
 .1.3.6.1.4.1.2011.6.36.1.1.1.14
hwH248MedGwyRowStatus
This is used to create new rows in this table, modify existing rows, and delete existing rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.36.1.1.1.15
hwH248MedGwyLastChange
The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then this o…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.36.1.1.1.16
hwH248MedGwyProfile1 obsolete
Indicates the name of the first H.248 profile of the MG (including / + version; version is a number).
OctetStringr/w
Constraints:
range: 1-67
 .1.3.6.1.4.1.2011.6.36.1.1.1.17
hwH248MedGwyProfile2 obsolete
Indicates the name of the second H.248 profile of the MG (including / + version; version is a number).
OctetStringr/w
Constraints:
range: 1-67
 .1.3.6.1.4.1.2011.6.36.1.1.1.18
hwH248MedGwyProfile3 obsolete
Indicates the name of the third H.248 profile of the MG (including / + version; version is a number).
OctetStringr/w
Constraints:
range: 1-67
 .1.3.6.1.4.1.2011.6.36.1.1.1.19
hwH248MedGwyProfileUsing obsolete
Indicates the name of the profile that is currently in use.
OctetString
Constraints:
range: 1-67
 .1.3.6.1.4.1.2011.6.36.1.1.1.20
hwH248MedGwyTopH248Version obsolete
Indicates the latest H.248 version that is supported by the MG. In the P300, this parameter is read-only.
Options:
1. v1(1) -version 1
2. v2(2) -version 2
3. v3(3) -version 3
Enumerationr/w
Enumerated Values:
1v1
2v2
3v3
 .1.3.6.1.4.1.2011.6.36.1.1.1.21
hwH248MedGwyCurH248Version
Indicates the current H.248 version of the MG.
Options:
1. v1(1) -version 1
2. v2(2) -version 2
3. v3(3) -version 3
Enumeration
Enumerated Values:
1v1
2v2
3v3
 .1.3.6.1.4.1.2011.6.36.1.1.1.22
hwH248MedGwyCurUsedDspNum
Indicates the count of currently occupied DSPs of the interface.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.36.1.1.1.23
hwH248MedGwyAuthInitialKey
Indicates the authentication initial key.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.36.1.1.1.24
hwH248MedGwyAuthMgId
Indicates the authentication MG ID.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2011.6.36.1.1.1.25
hwH248MedGwyAuthAlgorithm
Indicates the authentication encryption algorithm.
Options:
1. md5(1) -MD5
Enumeration
Enumerated Values:
1md5
 .1.3.6.1.4.1.2011.6.36.1.1.1.26
hwH248MedGwy2833Encrypt
Indicates the 2833 encryption key.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.36.1.1.1.27
hwH248MedGwyCfgHeartBeatTimer
Indicates the configured timer of the initial heartbeat.
Unit: second
Integer32r/w
Constraints:
range: 1-655
 .1.3.6.1.4.1.2011.6.36.1.1.1.28
hwH248MedGwyCurHeartBeatTimer
Indicates the current timer of the initial heartbeat.
The valid value range is 1..655, if the value is 0, the heartbeat is not started.
Unit: second
Integer32
Constraints:
range: 0-655
 .1.3.6.1.4.1.2011.6.36.1.1.1.29
hwH248MedGwyCallHoldTimer
Indicates the timer of holding the call after the MG interface is interrupted.
Unit: second
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.36.1.1.1.30
hwH248MedGwyMediaIPAddress1
Indicates the first media IP address of the MG.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.1.1.31
hwH248MedGwyMIDType
Indicates the MID type of the MG message.
Options:
1. ip4Address(1) -IP address
2. domainName(2) -domain name
3. deviceName(3) -device name
Enumerationr/w
Enumerated Values:
1ip4Address
2domainName
3deviceName
 .1.3.6.1.4.1.2011.6.36.1.1.1.32
hwH248MedGwyDeviceName
Indicates the name of the MG device.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.1.1.33
hwH248MedGwyheartbeattimes
Indicates the count of heartbeat re-transmission.
Integer32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.6.36.1.1.1.34
hwH248MedGwyheartbeatretranstimer
Indicates the interval of heartbeat re-transmission.
Integer32r/w
Constraints:
range: 0-655
 .1.3.6.1.4.1.2011.6.36.1.1.1.35
hwH248MedGwyCurMIDType
Indicates the current MID type of the MG message.
Options:
1. ip4Address(1) -IP address
2. domainName(2) -domain name
3. deviceName(3) -device name
Enumeration
Enumerated Values:
1ip4Address
2domainName
3deviceName
 .1.3.6.1.4.1.2011.6.36.1.1.1.36
hwH248MedGwyCurDeviceName
Indicates the current name of the MG device.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.1.1.37
hwH248MedGwyGracefulTimer
Indicates the graceful timer of the MG interface.
This parameter is effective only when it is delivered with the shutdown graceful command.
0 means no time limit.
Unit: second.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.2011.6.36.1.1.1.38
hwH248MedGwyBeginNegotiationH248Version
Indicates the H.248 version at the beginning of the negotiation.
0:depend on profile
1:v1
2:v2
3:v3
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.2011.6.36.1.1.1.39
hwH248MedGwyProfileIndex
Indicates the profile index configured for the MG. This parameter is effective only after the MG is reset.
Integer32r/w
Constraints:
range: 0-254
 .1.3.6.1.4.1.2011.6.36.1.1.1.40
hwH248MedGwyProfileIndexUsing
Indicates the profile index that is currently used by the MG.
Integer32
Constraints:
range: 0-254
 .1.3.6.1.4.1.2011.6.36.1.1.1.41
hwH248ProfileParaNegotiationSupport
Indicates whether the MG supports the negotiated profile parameters.
Options:
1. disable(1) -not support
2. enable(2) -support
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.36.1.1.1.42
hwH248MgProfileCfgName
Indicates the configured name of the H.248 profile of the MG.
OctetString
Constraints:
range: 1-67
 .1.3.6.1.4.1.2011.6.36.1.1.1.43
hwH248MgProfileNegoName
Indicates the negotiated name of the H.248 profile of the MG.
OctetString
Constraints:
range: 0-67
 .1.3.6.1.4.1.2011.6.36.1.1.1.44
hwH248MedGwyMediaIPAddress2
Indicates the second media IP of MG.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.1.1.45
hwH248MedGwyOperReasonCode
Indicates the reason code of reset or shutdown interface.It's valid when set hwH248MedGwyAdminStatus to 4,5 or 6 at the same time.
The leaf is optional,if not set,use the default reason code relates to the status, and t…
Integer32r/w
Constraints:
range: -1--1
range: 1-6
 .1.3.6.1.4.1.2011.6.36.1.1.1.46
hwH248MedGwySigIPAddrDhcpClientIndex
Dhcp Signal vlan id.
The valid value range is 1..4093,if the value is -1, the static signal ip will be used.
Integer32r/w
Constraints:
range: -1--1
range: 1-4093
 .1.3.6.1.4.1.2011.6.36.1.1.1.47
hwH248MedGwyMediaIPAddrDhcpClientIndex
Dhcp Media vlan id.
The valid value range is 1..4093,if the value is -1, the static media ip will be used.
Integer32r/w
Constraints:
range: -1--1
range: 1-4093
 .1.3.6.1.4.1.2011.6.36.1.1.1.48
hwH248MedGwyRestrans
Indicates whether the MG supports retrans.
Options:
1. enable(1) -support
2. disable(2) -not support
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.36.1.1.1.49
hwH248MedGwySigIPAddrName
Dynamic signal IP name.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.1.1.50
hwH248MedGwyMediaIPAddrName
Dynamic media IP name.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.1.1.51
hwH248MedGwyKeepActiveFlag
The switch for transfer connect regular renovate.
Options:
1. enable(1) -enable
2. disable(2) -disable
Default: disable(2)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.36.1.1.1.52
hwH248MedGwyKeepActivePeriod
Indicates the configured period of transfer connect regular renovate.
Unit: second
Default:30
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.2011.6.36.1.1.1.53

hwH248MedGwyCtrlTable

table
.1.3.6.1.4.1.2011.6.36.1.2 · 1 row entry · 11 columns
Open in standard view 
This table is used to config addresses of Media Gateway Controllers.
The indexes of this table are hwH248MedGwyCtrlGatewayId, hwH248MedGwyCtrlIdx.
hwH248MedGwyCtrlEntry entry .1.3.6.1.4.1.2011.6.36.1.2.1
This table is used to config addresses of Media Gateway Controllers.
The indexes of this entry are hwH248MedGwyCtrlGatewayId, hwH248MedGwyCtrlIdx.
Indexes
hwH248MedGwyCtrlGatewayId hwH248MedGwyCtrlIdx
Column Syntax OID
hwH248MedGwyCtrlGatewayId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.2.1.1
hwH248MedGwyCtrlIdx
Indicates the MGC index.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.2011.6.36.1.2.1.2
hwH248MedGwyCtrlIPAddress
The IP address of the Media Gateway Controller. The value 255.255.255.255 is returned if the entry is invalid.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.2.1.3
hwH248MedGwyCtrlDnsName
Indicates the DNS name of the MGC.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.2.1.4
hwH248MedGwyCtrlDnsIp
Indicates the IP address that is obtained through the MGC domain name.
DEFVAL { false }
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.2.1.5
hwH248MedGwyCtrlPort
UDP port of the Media Gateway Controller. The value 65535 is returned if the entry is invalid.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.36.1.2.1.6
hwH248MedGwyCtrlAdminStatus
Indicates to set the MGC as the active MGC.
Options:
1. active(1) -active state
Enumerationr/w
Enumerated Values:
1active
 .1.3.6.1.4.1.2011.6.36.1.2.1.7
hwH248MedGwyCtrlOperStatus
Status of the Media Gateway Controller (and/or) its transportLink.
Options:
1. up(1) -normal
2. down(2) -fault
3. standby(3) -standby
Enumeration
Enumerated Values:
1up
2down
3standby
 .1.3.6.1.4.1.2011.6.36.1.2.1.8
hwH248MedGwyCtrlRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.36.1.2.1.9
hwH248MedGwyCtrlLastChange
The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local network management subsystem, then this o…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.36.1.2.1.10
hwH248MedGwyCtrlIPAddress2
The IP address of the Media Gateway Controller for SCTP dual homing. The value 255.255.255.255 is returned if the entry is invalid.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.2.1.11

hwMgPhyTerminationCfgTable

table
.1.3.6.1.4.1.2011.6.36.1.3 · 1 row entry · 13 columns
Open in standard view 
This table is used to config the physical termination of the MG.
The index of this table is hwMgPhyTerminationIndex.
hwMgPhyTerminationCfgEntry entry .1.3.6.1.4.1.2011.6.36.1.3.1
This table is used to config the physical termination of the MG.
The index of this entry is hwMgPhyTerminationIndex.
Indexes
hwMgPhyTerminationIndex
Column Syntax OID
hwMgPhyTerminationIndex
Indicates the shelf/slot/port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.3.1.1
hwMgPhyTerminationMgId
Indicates the MG ID.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.3.1.2
hwMgPhyTerminationID
Indicates the termination ID.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.3.1.3
hwMgPhyTerminationTelNo
Indicates the telephone number.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.36.1.3.1.4
hwMgPhyTerminationSrvState
Indicates the service status.
Options:
1. serviceStopLocal(1) -stop local service
2. serviceStopRemote(2) -stop remote service
3. serviceStopAuto(3) -stop service automatically
4. serviceStart(4) -start service
5. ser…
Enumeration
Enumerated Values:
1serviceStopLocal
2serviceStopRemote
3serviceStopAuto
4serviceStart
5serviceStopGraceful
 .1.3.6.1.4.1.2011.6.36.1.3.1.5
hwMgPhyTerminationOperate
Indicates the service operation.
Options:
1. stop(1) -stop service
2. start(2) -start service
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.36.1.3.1.6
hwMgPhyTerminationRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.36.1.3.1.7
hwMgPhyTerminationContexID
Indicates the context ID of the termination.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.36.1.3.1.8
hwMgPhyTerminationLayerFlag
Indicates the layering flag.
Currently, only the value nolayer(1) is supported.
Options:
1. nolayer(1) -not to layer
2. layer(2) -to layer
Enumeration
Enumerated Values:
1nolayer
2layer
 .1.3.6.1.4.1.2011.6.36.1.3.1.9
hwMgPhyTerminationLastChange
Indicates the service status changing time.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.36.1.3.1.10
hwMgPhyTerminationPriorityFlag
Indicates the priority of the termination.
Options:
1. cat1(1) -cat1
2. cat2(2) -cat2
3. cat3(3) -cat3
Enumerationr/w
Enumerated Values:
1cat1
2cat2
3cat3
 .1.3.6.1.4.1.2011.6.36.1.3.1.11
hwMgPhyTerminationSrvAlarmState
Indicates the alarm state of service port.
Options:
1. no(1) -has no alarm
2. yes(2) -has alarm
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.2011.6.36.1.3.1.12
hwMgPhyTerminationSrvAlarmType
Indicates the alarm type of service port.
Options:
1. portFailure(1) -port failure
2. vagInterfaceInterrupt(2) -VAG Interrupt
3. noDsp(3) -no DSP resource alarm
4. portBlock(4) -port block
5. portLocked(5) -port locked
…
Enumeration
Enumerated Values:
1portFailure
2vagInterfaceInterrupt
3noDsp
4portBlock
5portLocked
6circuitryFailure
 .1.3.6.1.4.1.2011.6.36.1.3.1.13

hwMgPhyTerminationOperTable

table
.1.3.6.1.4.1.2011.6.36.1.4 · 1 row entry · 12 columns
Open in standard view 
This table is used to query the port status of the physical termination of the MG.
The index of this table is hwMgPhyTermIndex.
hwMgPhyTerminationOperEntry entry .1.3.6.1.4.1.2011.6.36.1.4.1
This table is used to query the port status of the physical termination of the MG.
The index of this entry is hwMgPhyTermIndex.
Indexes
hwMgPhyTermIndex
Column Syntax OID
hwMgPhyTermIndex
Indicates the shelf/slot/port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.4.1.1
hwMgPhyTerminationPortState
Indicates the physical status of the port.
Options:
1. idle(1) -idle
2. fault(2) -faulty
3. test(3) -test
4. lock(4) -locked
5. busy(5) -busy
6. localLoop(6) -local loopback
7. remoteLoop(7) -remote loopback
8. powerde…
Enumeration
Enumerated Values:
1idle
2fault
3test
4lock
5busy
6localLoop
7remoteLoop
8powerdeny
9ring
 .1.3.6.1.4.1.2011.6.36.1.4.1.2
hwMgPhyTerminationSrvType
Indicates the service type of the port.
Options:
1. normal(1)-instant service
2. innerSpc(2) -inner SPC
3. v5spc(3) -V5 SPC
4. v5pre(4) -V5 pre-connection
5. privateSpc(5) -private line service
6. ipSpc(6) -IP SPC
Enumeration
Enumerated Values:
1normal
2innerSpc
3v5spc
4v5pre
5privateSpc
6ipSpc
 .1.3.6.1.4.1.2011.6.36.1.4.1.3
hwMgPhyTerminationAdminStatus
Indicates the maintenance operation of the port.
Options:
1. reset(1) -reset
2. localloop(2) -local loopback
3. remoteloop(3) -remote loopback
4. cancelloop(4) -cancel loopback
5. startagc(5) -start automatic gain cont…
Enumerationr/w
Enumerated Values:
1reset
2localloop
3remoteloop
4cancelloop
5startagc
 .1.3.6.1.4.1.2011.6.36.1.4.1.4
hwMgPhyTerminationStateChange
Indicates the physical status changing time of the port.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.36.1.4.1.5
hwMgPhyTerminationConfigState
Indicates the configured subscriber type.
Options:
1. configedMgUser(1) -configured MG subscriber
2. configedV5User(2) -configured V5 subscriber
3. notConfiged(3) -not configured
4. spcmcfged(4) -configured SPCM subscr…
Enumeration
Enumerated Values:
1configedMgUser
2configedV5User
3notConfiged
4spcmcfged
5mglicensed
6v5licensed
 .1.3.6.1.4.1.2011.6.36.1.4.1.6
hwMgPhyTerminationOperOperate
Indicates the service operation.
Options:
1. stop(1) -stop service
2. start(2) -start service
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.36.1.4.1.7
hwMgPhyTerminationMaxCOBTime
The longest time of out of service gracefully.
Unit:minute
Integer32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.2011.6.36.1.4.1.8
hwMgPhyTerminationOnExpire
The disposal method when the port get out of service gracefully.
Options:
1. forced(1) -force to stop service
2. cancel(2) -cancel operation
Enumerationr/w
Enumerated Values:
1forced
2cancel
 .1.3.6.1.4.1.2011.6.36.1.4.1.9
hwMgPhyTerminationUpTimeSinceLastRTS
The time since PSTN port get in service latest
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.36.1.4.1.10
hwMgPhyTerminationEndServiceLastTime
Remanent time before the timer overtime
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.36.1.4.1.11
hwMgPhyTerminationEndServiceMode
Endservice mode.
1-Immediate, 2-Graceful.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.6.36.1.4.1.12

hwMgEphemeralTerminationTable

table
.1.3.6.1.4.1.2011.6.36.1.5 · 1 row entry · 15 columns
Open in standard view 
This table is used to config the virtual termination configuration of the MG.
The indexes of this table are hwMgEphemeralTerminationMgId, hwMgEphemeralTerminationID.
hwMgEphemeralTerminationEntry entry .1.3.6.1.4.1.2011.6.36.1.5.1
This table is used to config the virtual termination configuration of the MG.
The indexes of this entry are hwMgEphemeralTerminationMgId, hwMgEphemeralTerminationID.
Indexes
hwMgEphemeralTerminationMgId hwMgEphemeralTerminationID
Column Syntax OID
hwMgEphemeralTerminationMgId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.5.1.1
hwMgEphemeralTerminationID
Indicates the virtual termination ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.5.1.2
hwMgEphemeralTerminationPacketTime
Indicates the packetizing time.
Unit: millisecond.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.5.1.3
hwMgEphemeralTerminationVAD
Indicates voice activity detection.
Options:
1. true(1) -enable VAD
2. false(2) -disable VAD
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.2011.6.36.1.5.1.4
hwMgEphemeralTerminationEC
Indicates echo cancel.
Options:
1. true(1) -enable EC
2. false(2) -disable EC
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.2011.6.36.1.5.1.5
hwMgEphemeralTerminationJitBuffer
Indicates the value of JitBuffer.
Unit: second.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.5.1.6
hwMgEphemeralTerminationTransGain
Indicates the transmit gain.
Unit: dB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.5.1.7
hwMgEphemeralTerminationRecvGain
Indicates the receive gain.
Unit: dB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.5.1.8
hwMgEphemeralTerminationCodeC
Indicates the enumerated definition of the VoiceCode. Note that several items in the enumerated definition are not consecutive.
In the definition above, acG723Low(16) and acG723High(17) need not be distinguished and can…
Enumeration
Enumerated Values:
1acG711A-law
2acG711u-law
3acG726-16
4acG726-24
5acG726-32
6acG726-40
7acG727-16
8acG727-24-16
9acG727-24
10acG727-32-16
11acG727-32-24
12acG727-32
13acG727-40-16
14acG727-40-24
15acG727-40-32
16acG723Low
17acG723High
18acG729
19acReserved18
20acGSM610
21acGSM610MS
22acReserved21
23acTransparent
24acG728
25acHDLCcoder
26acNetCoder-4-8
27acNetCoder-5-6
28acNetCoder-6-4
29acNetCoder-7-2
30acNetCoder-8
31acNetCoder-8-8
32acNetCoder-9-6
33acEVRC
34acEVRC-TFO
35acQCELP-8
36acQCELP-8-TFO
37acQCELP-13
38acQCELP-13-TFO
39acReserved38
40acReserved39
41acNoCoder
42acModemAnswer
43acModemCall
44acReserved43
45acReserved44
46acG711A-law-5-5
47acG711u-law-5-5
48acG726-32-5-5
49acReserved48
50acReserved49
51acAMR-4-75
52acAMR-5-15
53acAMR-5-9
54acAMR-6-7
55acAMR-7-4
56acAMR-7-95
57acAMR-10-2
58acAMR-12-2
59t38Fax
60g722
 .1.3.6.1.4.1.2011.6.36.1.5.1.9
hwMgEphemeralTerminationLocalIPAddr
Indicates the local IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.5.1.10
hwMgEphemeralTerminationLocalPort
Indicates the local RTP port.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.36.1.5.1.11
hwMgEphemeralTerminationPeerIPAddr
Indicates the peer IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.5.1.12
hwMgEphemeralTerminationPeerPort
Indicates the peer RTP port.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.36.1.5.1.13
hwMgEphemeralTerminationPlace
Indicates the DSP channel (shelf/slot/subboard/channel index) of the virtual terminal of the MG.
Bits 31-26 (six bits): shelf index
Bits 25-20 (six bits): slot index
Bits 19-16 (four bits): subboard index
Bits 15-0 (16 …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.5.1.14
hwMgEphemeralTerminationContexID
Indicates the context ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.5.1.15

hwMgContexTable

table
.1.3.6.1.4.1.2011.6.36.1.6 · 1 row entry · 4 columns
Open in standard view 
This table is used to config the context of the MG.
The indexes of this table are hwMgContexMgId, hwMgContexlID.
hwMgContexEntry entry .1.3.6.1.4.1.2011.6.36.1.6.1
This table is used to config the context of the MG.
The indexes of this entry are hwMgContexMgId, hwMgContexlID.
Indexes
hwMgContexMgId hwMgContexlID
Column Syntax OID
hwMgContexMgId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.6.1.1
hwMgContexlID
Indicates the context ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.6.1.2
hwMgTerminationID1
Indicates the physical termination ID.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.36.1.6.1.3
hwMgTerminationID2
Indicates the virtual termination ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.6.1.4

hwH248ParaTable

table
.1.3.6.1.4.1.2011.6.36.1.17 · 1 row entry · 20 columns
Open in standard view 
This table is used to config the H.248 parameter. 
The index of this table is hwH248ParaMgId.
hwH248ParaEntry entry .1.3.6.1.4.1.2011.6.36.1.17.1
This table is used to config the H.248 parameter.
The index of this entry is hwH248ParaMgId.
Indexes
hwH248ParaMgId
Column Syntax OID
hwH248ParaMgId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.17.1.1
hwH248ParaTransReliable
Indicates the transaction reliability. The transaction reliability queue and the re-transmission timer are initialized when the protocol is initialized. Therefore, the transaction reliability can be set dynamically base…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.17.1.2
hwH248ParaLongTimer
Indicates the length of the long timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 30000 ms. The value can be set dynamically according to …
Integer32r/w
Constraints:
range: 10000-40000
 .1.3.6.1.4.1.2011.6.36.1.17.1.3
hwH248ParaMaxRetransTimer
Indicates the maximum length of the re-transmission timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 4000 ms. When the H.248 protocol stac…
Integer32r/w
Constraints:
range: 500-16000
 .1.3.6.1.4.1.2011.6.36.1.17.1.4
hwH248ParaMinRetransTimer
Indicates the minimum length of the re-transmission timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 1000 ms. When the H.248 protocol stac…
Integer32r/w
Constraints:
range: 100-4000
 .1.3.6.1.4.1.2011.6.36.1.17.1.5
hwH248ParaMgProvRespTimer
Indicates the length of the timer for provisional responses. By default, it is 8000 ms.
Unit: millisecond.
Integer32r/w
Constraints:
range: 6000-10000
 .1.3.6.1.4.1.2011.6.36.1.17.1.6
hwH248ParaMaxRetrans
Indicates the maximum count of re-transmission. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The value can be set dynamically based on different network conditions. By default,…
Integer32r/w
Constraints:
range: 1-9
 .1.3.6.1.4.1.2011.6.36.1.17.1.7
hwH248ParaSecurity
Indicates the authorization type.
Options:
1. noah(1) -no authorization
2. md5(2) -MD5
3. sha1(3) -SHA1
Enumerationr/w
Enumerated Values:
1noah
2md5
3sha1
 .1.3.6.1.4.1.2011.6.36.1.17.1.8
hwH248ParaSdpEncodeType
Indicates the SDP encapsulation type.
Options:
1. text(1) -text
2. hex(2) -hex
Enumerationr/w
Enumerated Values:
1text
2hex
 .1.3.6.1.4.1.2011.6.36.1.17.1.9
hwH248ParaResponseAckCtrl
Indicates the switch of the three-way handshake signal.
Options:
1. false(1) -disable three-way handshake
2. true(2) -enable three-way handshake
Enumerationr/w
Enumerated Values:
1false
2true
 .1.3.6.1.4.1.2011.6.36.1.17.1.10
hwH248ParaRetransMode
Indicates the retransmission mode.
Options:
1. auto(1) -auto
2. fixed(2) -fixed
Enumerationr/w
Enumerated Values:
1auto
2fixed
 .1.3.6.1.4.1.2011.6.36.1.17.1.11
hwH248ParaRetransTimer
Indicates the fixed re-transmission interval (this parameter is effective when the re-transmission mode is the fixed mode; by default, it is 2000).
Integer32r/w
Constraints:
range: 100-4000
 .1.3.6.1.4.1.2011.6.36.1.17.1.12
hwH248ParaTMax
Indicates the re-transmission length of the H.248 protocol stack (by default, it is 25000).
Integer32r/w
Constraints:
range: 10000-30000
 .1.3.6.1.4.1.2011.6.36.1.17.1.13
hwH248ParaRetransfailoption
Indicates the retransmission failure option of the H.248 protocol stack.
Options:
1. times(1) -times
2. t-max(2) -max time
Enumeration
Enumerated Values:
1times
2t-max
 .1.3.6.1.4.1.2011.6.36.1.17.1.14
hwH248ParaFormatoption
Indicates the message format of the H.248 protocol stack.
Options:
1. short(1) -short format
2. long(2) -long format
Default: short(1)
Enumerationr/w
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.2011.6.36.1.17.1.15
hwH248ParaMTU
Indicates the value of the maximum transmission unit of the H.248 protocol stack.
Default: 1500
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.2011.6.36.1.17.1.16
hwH248ParaMessagesegmentation
Indicates the message format of the H.248 protocol stack.
Options:
1. support(1) -support format message
2. notsupport(2) -not support format message
Default: support(1)
Enumerationr/w
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.2011.6.36.1.17.1.17
hwH248ParaMgcProvRespTimer
Indicates the length of MGC provisional response timer.
Unit: millisecond
Integer32r/w
Constraints:
range: 6000-10000
 .1.3.6.1.4.1.2011.6.36.1.17.1.18
hwH248ParaMgOriginatedPendingLimit
Indicates the max times of MG sends provisional response.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.6.36.1.17.1.19
hwH248ParaMgcOriginatedPendingLimit
Indicates the max times of MGC sends provisional response.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.6.36.1.17.1.20

hwH248DigitmapTable

table
.1.3.6.1.4.1.2011.6.36.1.23 · 1 row entry · 5 columns
Open in standard view 
This table is used to config the inner digitmap configuration.
The index of this table is hwH248DigitmapMgId.
hwH248DigitmapEntry entry .1.3.6.1.4.1.2011.6.36.1.23.1
This table is used to config the inner digitmap configuration.
The index of this entry is hwH248DigitmapMgId.
Indexes
hwH248DigitmapMgId
Column Syntax OID
hwH248DigitmapMgId
Indicates the MG interface ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.23.1.1
hwH248DigitmapInner
Indicates the inner call digitmap.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.36.1.23.1.2
hwH248DigitmapEmergency
Indicates the emergency channel digitmap.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.36.1.23.1.3
hwH248DigitmapDualdial
Indicates the automatic re-dial digitmap.
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.2011.6.36.1.23.1.4
hwH248DigitmapOverLoadUrgent
Indicates the emergency call digitmap in case of overload or insufficient bandwidth.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.36.1.23.1.5

hwStandaloneParaTable

table
.1.3.6.1.4.1.2011.6.36.1.24 · 1 row entry · 4 columns
Open in standard view 
This table is used to config the stand-alone parameter.
The index of this table is hwStandaloneParaMgId.
hwStandaloneParaEntry entry .1.3.6.1.4.1.2011.6.36.1.24.1
This table is used to config the stand-alone parameter.
The index of this entry is hwStandaloneParaMgId.
Indexes
hwStandaloneParaMgId
Column Syntax OID
hwStandaloneParaMgId
Indicates the MG interface ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.24.1.1
hwStandAloneDialTone
Indicates the duration of the dial tone.
Unit: second
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2011.6.36.1.24.1.2
hwStandAloneRing
Indicates the duration of the ring.
Unit: second
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2011.6.36.1.24.1.3
hwStandAloneBusyTone
Indicates the duration of the busy tone.
Unit: second
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2011.6.36.1.24.1.4

hwH248MgSoftParameterTable

table
.1.3.6.1.4.1.2011.6.36.1.28 · 1 row entry · 39 columns
Open in standard view 
This table is to indicates the MG software parameter.
The index of this table is hwH248MgInterfaceIndex.
hwH248MgSoftParameterEntry entry .1.3.6.1.4.1.2011.6.36.1.28.1
This table is to indicates the MG software parameter.
The index of this entry is hwH248MgInterfaceIndex.
Indexes
hwH248MgInterfaceIndex
Column Syntax OID
hwH248MgInterfaceIndex
Indicates the MG interface index.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.28.1.1
hwH248MgSoftParameter0 deprecated
Parameter name index 0. It indicates whether the terminal ID of the MG interface is layered.
In the P300, the values of 1 and 2 are unavailable.
Options:
1. yes(1) -layered
2. no(2) -not layered
3. nolayer(3) -not laye…
Enumerationr/w
Enumerated Values:
1yes
2no
3nolayer
4type1layer
5type2layer
 .1.3.6.1.4.1.2011.6.36.1.28.1.2
hwH248MgSoftParameter1 deprecated
Parameter name index 1. It indicates whether the ongoing calls are maintained after MG is disconnected from MGC. (It is unavailable in the VSPV1R2.)
Options:
1. holding-to-resume(1) -hold to resume
2. no(2) -not maintai…
Enumerationr/w
Enumerated Values:
1holding-to-resume
2no
3holding-all-along
 .1.3.6.1.4.1.2011.6.36.1.28.1.3
hwH248MgSoftParameter2
Parameter name index 2. It indicates whether the MG interface supports multiple homing.
It is unavailable in the VSPV1R2.
Options:
1. no(1) -not support multiple homing
2. multiHome(2) -support multipl…
Enumerationr/w
Enumerated Values:
1no
2multiHome
3autoSwitchOver
 .1.3.6.1.4.1.2011.6.36.1.28.1.4
hwH248MgSoftParameter3 deprecated
Parameter name index 3. It indicates the MG interface interruption detecting mode. It is unavailable in the P300.
Options:
1. heartbeat(1) -heartbeat
2. messageRetransmission(2) -retransmission
Enumerationr/w
Enumerated Values:
1heartbeat
2messageRetransmission
 .1.3.6.1.4.1.2011.6.36.1.28.1.5
hwH248MgSoftParameter4
Parameter name index 4. It indicates whether the wildcard is used in registration.
Options:
1. yes(1) -use wildcard in registration
2. no(2) -do not use wildcard in registration
Default: yes(1)
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.6
hwH248MgSoftParameter5 deprecated
Parameter name index 5. It indicates whether the port fault and auto-block is reported to the MGC.
Options:
1. yes(1) -the port fault and auto-block is reported to the MGC
2. no(2) -the port fault and auto-block is not…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.7
hwH248MgSoftParameter6
Parameter name index 6. It indicates whether authentication is supported.
Options:
1. yes(1) -support authentication
2. no(2) -not support authentication
Default: no(2)
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.8
hwH248MgSoftParameter7
Parameter name index 7. It indicates whether the security header is supported.
Options:
1. yes(1) -support the security header
2. no(2) -not support the security header
Default: no(2)
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.9
hwH248MgSoftParameter8 deprecated
Parameter name index 8. It indicates the maximum count of DSPs supported by the VAG. It is unavailable in the P300.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.36.1.28.1.10
hwH248MgSoftParameter9 deprecated
Parameter name index 9. It indicates whether overload control is supported. It is unavailable in the P300.
Options:
1. yes(1) -support overload control
2. no(2) -not support overload control
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.11
hwH248MgSoftParameter10 deprecated
Parameter name index 10. It indicates whether the SDP contains the o=,s=,t= row. It is unavailable in the VSPV1R2.
Options:
1. yes(1) -SDP contain the o=,s=,t= row
2. no(2) -SDP not contain the o=,s=,t= row
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.12
hwH248MgSoftParameter11
Parameter name index 11. It indicates the stand-alone flag.
Options:
1. none(1) -not support stand alone
2. inner(2) -support inner call
3. emergency(3) -support emergence call
4. both(4) -support inner ca…
Enumerationr/w
Enumerated Values:
1none
2inner
3emergency
4both
 .1.3.6.1.4.1.2011.6.36.1.28.1.13
hwH248MgSoftParameter12 deprecated
Parameter name index 12. It indicates the stand-alone interruption flag. It is unavailable in the VSPV1R2.
Options:
1. no(1) -no
2. yes(2) -yes
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.2011.6.36.1.28.1.14
hwH248MgSoftParameter13
Parameter name index 13. It indicates the DMM match mode.
Options:
1. min(1) -shortest
2. max(2) -longest
3. auto(3) -protocol define
4. autoadapt(4) -auto adapter
Default: min(1)
Enumerationr/w
Enumerated Values:
1min
2max
3auto
4autoadapt
 .1.3.6.1.4.1.2011.6.36.1.28.1.15
hwH248MgSoftParameter14 deprecated
Parameter name index 14. It indicates the value of the maximum transmission unit.
Options:
1. min(1) -min
2. max(5000) -max
Enumerationr/w
Enumerated Values:
1min
5000max
 .1.3.6.1.4.1.2011.6.36.1.28.1.16
hwH248MgSoftParameter15
Parameter name index 15. It indicates the RTP source port filtering switch.
Options:
1. no(1) -not filter without remote media.
2. yes(2) -filter without remote media.
3. always-no(3) -always not filter.
Default: n…
Enumerationr/w
Enumerated Values:
1no
2yes
3always-no
 .1.3.6.1.4.1.2011.6.36.1.28.1.17
hwH248MgSoftParameter16
Parameter name index 16. It indicates the length of the RTP source port filtering timer. This parameter is valid only when the RTP filtering is enabled.
Range: 1-400(VSP is 1-30S)
Default: 5
Unit: second
Integer32r/w
Constraints:
range: 1-400
 .1.3.6.1.4.1.2011.6.36.1.28.1.18
hwH248MgSoftParameter17 deprecated
Parameter name index 17. It indicates the context protection switch. It is unavailable in the VSPV1R2.
Options:
1. yes(1) -the system releases the resource automatically
2. no(2) -the system does not release the resour…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.19
hwH248MgSoftParameter18 deprecated
Parameter name index 18. It indicates the point-to-point fault report flag.
Options:
1. yes(1) -report
2. no(2) -not report
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.20
hwH248MgSoftParameter19 deprecated
Parameter name index 19. It indicates the point-to-multipoint fault report flag.
Options:
1. yes(1) -report
2. no(2) -not report
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.21
hwH248MgSoftParameter20 deprecated
Parameter name index 20. It indicates the protocol version negotiation strategy. It is unavailable in the VSPV1R2.
Options:
1. highest(1) -negotiate from the latest version
2. lowest(2) -negotiate from the earliest ver…
Enumerationr/w
Enumerated Values:
1highest
2lowest
3no
 .1.3.6.1.4.1.2011.6.36.1.28.1.22
hwH248MgSoftParameter21 deprecated
Parameter name index 21. It is reserved in the system.
Options:
1. yes(1) -yes
2. no(2) -no
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.23
hwH248MgSoftParameter22
Parameter name index 22. It indicates the type of the prompt tone that is played after MG is disconnected from MGC.
Options:
1. bT(1) -busy tone
2. eET(2) -equipment engaged tone
3. announcement(3) -announcement
Defaul…
Enumerationr/w
Enumerated Values:
1bT
2eET
3announcement
 .1.3.6.1.4.1.2011.6.36.1.28.1.24
hwH248MgSoftParameter23
Parameter name index 23.It indicates the length of synchronize-delay timer of port config state.
Default: 35
Unit: second
Integer32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.2011.6.36.1.28.1.25
hwH248MgSoftParameter24
Parameter name index 24. It indicates the number of rtp terminal. The maximum value is limited by product specification.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.36.1.28.1.26
hwH248MgSoftParameter25
Parameter name index 25. It indicates max random value of the avalanche prevention system of the interface.
Default: 60000
Unit: millisecond
Integer32r/w
Constraints:
range: 30000-300000
 .1.3.6.1.4.1.2011.6.36.1.28.1.27
hwH248MgSoftParameter26
Parameter name index 26. It indicates the local block tone type.
Options:
1. busyTone(1) -busy tone
2. congestionTone(2) -congestion tone
3. muteTone(3) -mute tone
4. userDefineTone1(4) -user defined t…
Enumerationr/w
Enumerated Values:
1busyTone
2congestionTone
3muteTone
4userDefineTone1
5userDefineTone2
 .1.3.6.1.4.1.2011.6.36.1.28.1.28
hwH248MgSoftParameter27
Parameter name index 27. It indicates the remote block tone type.
Options:
1. busyTone(1) -busy tone
2. congestionTone(2) -congestion tone
3. muteTone(3) -mute tone
4. userDefineTone1(4) -user defined …
Enumerationr/w
Enumerated Values:
1busyTone
2congestionTone
3muteTone
4userDefineTone1
5userDefineTone2
 .1.3.6.1.4.1.2011.6.36.1.28.1.29
hwH248MgSoftParameter28
Parameter name index 28. It indicates the length of howler tone.
Default: 60
Unit: second
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.36.1.28.1.30
hwH248MgSoftParameter29
Parameter name index 29. It indicates the length of message waiting tone.
Default: 3
Unit: second
Integer32r/w
Constraints:
range: 1-60000
 .1.3.6.1.4.1.2011.6.36.1.28.1.31
hwH248MgSoftParameter30
Parameter name index 30. It indicates the length of long connect alarm.
Default: 60
Unit: minute
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.36.1.28.1.32
hwH248MgSoftParameter31
Parameter name index 31. It indicates whether MG send long connect alarm.
Options:
1. enable(1) -enable send long connect alarm
2. disable(2) -disable send long connect alarm
Default: disable(2)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.36.1.28.1.33
hwH248MgSoftParameter32
Parameter name index 32. The minimal length of port auto register timer.
Default: 1800
Unit: second
Integer32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.6.36.1.28.1.34
hwH248MgSoftParameter33
Parameter name index 33. It indicates whether MG shutdown heartbeat.
Options:
1. shutdown(1) -shutdown heartbeat
2. enable(2) -enable heartbeat
Default: enable(2)
Enumerationr/w
Enumerated Values:
1shutdown
2enable
 .1.3.6.1.4.1.2011.6.36.1.28.1.35
hwH248MgSoftParameter34
Parameter name index 34. It indicates whether the gateway actively sets up or cancels the link for the BRA user when the softswitch issues the in-service or out-of-service message.
Options:
1. yes(1) -yes
2. no(2) -…
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.2011.6.36.1.28.1.36
hwH248MgSoftParameter35
Parameter name index 35. It indicates the mode for ISDN port is in service and out service.
Options:
1. both(1) -supports in-service and out-of-service in single channel mode and wildcard mode
2. singlechannel(…
Enumerationr/w
Enumerated Values:
1both
2singlechannel
3wildcard
 .1.3.6.1.4.1.2011.6.36.1.28.1.37
hwH248MgSoftParameter36
Parameter name index 36. Indicates the baseline interval of sending the registration message during the switchover between multi-homing MGCs.
Default: 40
Unit: second
Integer32r/w
Constraints:
range: 1-1800
 .1.3.6.1.4.1.2011.6.36.1.28.1.38
hwH248MgSoftParameter37
Parameter name index 37. The switch for the pulse signal switch to the DTMF signal.
Options:
1. enable(1) -enable
2. disable(2) -disable
Default: disable(2)
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.36.1.28.1.39

hwH248DmmParaTable

table
.1.3.6.1.4.1.2011.6.36.1.29 · 1 row entry · 5 columns
Open in standard view 
This table is used to config the digitmap.
The index of this table is hwH248DmmParaMgId.
hwH248DmmParaEntry entry .1.3.6.1.4.1.2011.6.36.1.29.1
This table is used to config the digitmap.
The index of this entry is hwH248DmmParaMgId.
Indexes
hwH248DmmParaMgId
Column Syntax OID
hwH248DmmParaMgId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.29.1.1
hwH248DmmParaStartTimer
Indicates the length of the DMM start timer.
Unit: second
Integer32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.2011.6.36.1.29.1.2
hwH248DmmParaShortTimer
Indicates the length of the DMM short timer.
Unit: second
Integer32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.2011.6.36.1.29.1.3
hwH248DmmParaLongTimer
Indicates the length of the DMM long timer
Unit: second
Integer32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.2011.6.36.1.29.1.4
hwH248DmmParaDurationTimer
Indicates the length of the DMM duration timer.
Unit: millisecond
Integer32r/w
Constraints:
range: 100-9900
 .1.3.6.1.4.1.2011.6.36.1.29.1.6

hwOverloadReservalTable

table
.1.3.6.1.4.1.2011.6.36.1.31 · 1 row entry · 12 columns
Open in standard view 
This table is used to config the DSP reserved parameter.
The index of this table is hwDspOverloadReservalMgId.
hwOverloadReservalEntry entry .1.3.6.1.4.1.2011.6.36.1.31.1
This table is used to config the DSP reserved parameter.
The index of this entry is hwDspOverloadReservalMgId.
Indexes
hwDspOverloadReservalMgId
Column Syntax OID
hwDspOverloadReservalMgId
Indicates the MG ID to be configured.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.31.1.1
hwTotalDspNum
Indicates the total count of DSPs.
Integer32r/w
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.2
hwTotalDspUseNum
Indicates the total count of occupied DSPs.
Default: 0
Integer32
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.3
hwReservalCat1DspNum
Indicates the count of the DSPs of category 1.
Integer32r/w
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.4
hwActualCat1DspUseNum
Indicates the count of the occupied DSPs of category 1.
Default: 0
Integer32
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.5
hwActualCat1CallUseDspNum
Indicates the count of the DSPs of category 1 occupied by calls.
Default: 0
Integer32
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.6
hwReservalCat2DspNum
Indicates the count of the DSPs of category 2.
Integer32r/w
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.7
hwActualCat2DspUseNum
Indicates the count of the occupied DSPs of category 2.
Default: 0
Integer32
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.8
hwActualCat2CallUseDspNum
Indicates the count of the DSPs of category 2 occupied by calls.
Default: 0
Integer32
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.9
hwDspReservalCommonNum
Indicates the count of common DSPs reserved for configuration.
Integer32
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.10
hwActualCommonDspUseNum
Indicates the count of occupied common DSPs.
Default: 0
Integer32
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.11
hwActualCommonCallUseDspNum
Indicates the count of the common DSPs occupied by calls.
Default: 0
Integer32
Constraints:
range: 0-3072
 .1.3.6.1.4.1.2011.6.36.1.31.1.12

hwH248TIDConfigTable

table
.1.3.6.1.4.1.2011.6.36.1.32 · 1 row entry · 17 columns
Open in standard view 
This table is used to config H248 terminal ID.
The index of this table is hwVAGId.
hwH248TIDConfigEntry entry .1.3.6.1.4.1.2011.6.36.1.32.1
This table is used to config H248 terminal ID.
The index of this entry is hwVAGId.
Indexes
hwVAGId
Column Syntax OID
hwVAGId
Media Gateway ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.32.1.1
hwH248BraPrefix
Indicates the BRA terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.32.1.2
hwH248PraPrefix
Indicates the PRA terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.32.1.3
hwH248PstnPrefix
Indicates the PSTN terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.32.1.4
hwH248RtpPrefix
Indicates the RTP terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.32.1.5
hwH248Separator
Indicates the terminal separator.
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.6.36.1.32.1.6
hwH248R2Prefix
Indicates the R2 terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.32.1.7
hwH248DpnssPrefix
Indicates the DPNSS terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.32.1.8
hwH248Dass2Prefix
Indicates the DASS2 terminal prefix.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.6.36.1.32.1.9
hwH248BraTemplateIndex
Indicates the index of the BRA TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.32.1.10
hwH248PraTemplateIndex
Indicates the index of the PRA TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.32.1.11
hwH248PstnTemplateIndex
Indicates the index of the PSTN TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.32.1.12
hwH248RtpTemplateIndex
Indicates the index of the RTP TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.32.1.13
hwH248R2TemplateIndex
Indicates the index of the R2 TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.32.1.14
hwH248DpnssTemplateIndex
Indicates the index of the DPNSS TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.32.1.15
hwH248Dass2TemplateIndex
Indicates the index of the DASS2 TID profile.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.36.1.32.1.16
hwH248IsNeedToConfigTID
Indicates whether the terminal ID needs to be configured for the subscriber. Bit0 (low) to bit31 (high) respectively represent PSTN, BRA, PRA, DPNSS, DASS2, and R2. The remaining bits are reserved. (It is unavailable in…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.36.1.32.1.17

hwH248ProfileSupportTable

table
.1.3.6.1.4.1.2011.6.36.1.67 · 1 row entry · 3 columns
Open in standard view 
This table is used to set the H248 profile configuration.
The index of this table is hwH248ProfileIndex.
hwH248ProfileSupportEntry entry .1.3.6.1.4.1.2011.6.36.1.67.1
This table is used to set the H248 profile configuration.
The index of this entry is hwH248ProfileIndex.
Indexes
hwH248ProfileIndex
Column Syntax OID
hwH248ProfileIndex
Indicates the profile index.
Integer32
Constraints:
range: 0-254
 .1.3.6.1.4.1.2011.6.36.1.67.1.1
hwH248ProfileCfgName
Indicates the configuration name of the profile.
OctetString .1.3.6.1.4.1.2011.6.36.1.67.1.2
hwH248ProfileRegName
Indicates the registration name (that is, the negotiation name) of the profile.
OctetString .1.3.6.1.4.1.2011.6.36.1.67.1.3

hwH248MedGwyCurTableTable

table
.1.3.6.1.4.1.2011.6.36.1.68 · 1 row entry · 13 columns
Open in standard view 
This table is used to query the current parameter configuration status of the MG interface.
The index of this table is hwH248MgId.
hwH248MedGwyCurTableEntry entry .1.3.6.1.4.1.2011.6.36.1.68.1
This table is used to query the current parameter configuration status of the MG interface.
The index of this entry is hwH248MgId.
Indexes
hwH248MgId
Column Syntax OID
hwH248MgId
Indicates the MG ID.
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.6.36.1.68.1.1
hwH248MedGwyProfileIndexCur
Indicates the profile index that is currently used by the MG.
Integer32
Constraints:
range: 0-254
 .1.3.6.1.4.1.2011.6.36.1.68.1.2
hwH248MedGwyH248VersionCur
Indicates the current H.248 version of the MG.
Options:
1. v1(1) -version 1
2. v2(2) -version 2
3. v3(3) -version 3
Enumeration
Enumerated Values:
1v1
2v2
3v3
 .1.3.6.1.4.1.2011.6.36.1.68.1.3
hwH248MedGwyHeartBeatTimerCur
Indicates the current length of the initial heartbeat timer.
The valid value range is 5..655, if the value is 0, the heartbeat is not started.
Unit: second
Integer32
Constraints:
range: 0-0
range: 5-655
 .1.3.6.1.4.1.2011.6.36.1.68.1.4
hwH248MedGwyMIDTypeCur
Indicates the current message MID type of the MG.
Options:
1. ip4Address(1) -IP address
2. domainName(2) -domain name
3. deviceName(3) -device name
Enumeration
Enumerated Values:
1ip4Address
2domainName
3deviceName
 .1.3.6.1.4.1.2011.6.36.1.68.1.5
hwH248MedGwyDeviceNameCur
Indicates the current device name of the MG.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.68.1.6
hwH248ProfileNegoParaCur
Indicates whether the profile currently used by the MG supports the profile parameter negotiation.
Options:
1. disable(1) -disable
2. enable(2) -enable
Enumeration
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.36.1.68.1.7
hwH248ProfileCfgNameCur
Indicates the configuration name of the H.248 profile currently used by the MG.
OctetString
Constraints:
range: 1-67
 .1.3.6.1.4.1.2011.6.36.1.68.1.8
hwH248ProfileNegoNameCur
Indicates the negotiation name of the H.248 profile currently used by the MG.
OctetString
Constraints:
range: 0-67
 .1.3.6.1.4.1.2011.6.36.1.68.1.9
hwH248MedGwySigIPAddrNameCur
Indicates the current working dynamic signal IP name.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.68.1.10
hwH248MedGwyMediaIPAddrNameCur
Indicates the current working dynamic media IP name.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.6.36.1.68.1.11
hwH248MedGwySigIPAddress1Cur
Indicates the signaling IP address of currently used by the MG.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.68.1.12
hwH248MedGwyMediaIPAddress1Cur
Indicates the media IP address of currently used by the MG.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.36.1.68.1.13