hwH248ParaMTU
HUAWEI-VOIP-H248-MIB ·
.1.3.6.1.4.1.2011.6.36.1.17.1.16
Object
column
r/w
Integer32
Indicates the value of the maximum transmission unit of the H.248 protocol stack. Default: 1500
Context
- MIB
- HUAWEI-VOIP-H248-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.17.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwH248ParaEntry
- Table
- hwH248ParaTable
- Siblings
- 19
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwH248ParaMgId Indicates the MG ID. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.1 |
| hwH248ParaResponseAckCtrl Indicates the switch of the three-way handshake signal.
Options:
1. false(1) -disable three-way handshake
2. true(2) -enable three-way handshake | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.17.1.10 |
| hwH248ParaRetransMode Indicates the retransmission mode.
Options:
1. auto(1) -auto
2. fixed(2) -fixed | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.17.1.11 |
| hwH248ParaRetransTimer Indicates the fixed re-transmission interval (this parameter is effective when the re-transmission mode is the fixed mode; by default, it is 2000). | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.12 |
| hwH248ParaTMax Indicates the re-transmission length of the H.248 protocol stack (by default, it is 25000). | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.13 |
| hwH248ParaRetransfailoption Indicates the retransmission failure option of the H.248 protocol stack.
Options:
1. times(1) -times
2. t-max(2) -max time | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.17.1.14 |
| hwH248ParaFormatoption Indicates the message format of the H.248 protocol stack.
Options:
1. short(1) -short format
2. long(2) -long format
Default: short(1) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.17.1.15 |
| hwH248ParaMessagesegmentation Indicates the message format of the H.248 protocol stack.
Options:
1. support(1) -support format message
2. notsupport(2) -not support format message
Default: support(1) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.17.1.17 |
| hwH248ParaMgcProvRespTimer Indicates the length of MGC provisional response timer.
Unit: millisecond | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.18 |
| hwH248ParaMgOriginatedPendingLimit Indicates the max times of MG sends provisional response. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.19 |
| hwH248ParaTransReliable Indicates the transaction reliability. The transaction reliability queue and the re-transmission timer are initialized when the protocol is initialized. Therefore, the transaction… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.17.1.2 |
| hwH248ParaMgcOriginatedPendingLimit Indicates the max times of MGC sends provisional response. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.20 |
| hwH248ParaLongTimer Indicates the length of the long timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value of 30000 ms. The va… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.3 |
| hwH248ParaMaxRetransTimer Indicates the maximum length of the re-transmission timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value … | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.4 |
| hwH248ParaMinRetransTimer Indicates the minimum length of the re-transmission timer. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The protocol recommends a value … | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.5 |
| hwH248ParaMgProvRespTimer Indicates the length of the timer for provisional responses. By default, it is 8000 ms.
Unit: millisecond. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.6 |
| hwH248ParaMaxRetrans Indicates the maximum count of re-transmission. This parameter is a concept in the transaction reliability of the H.248 protocol stack. The value can be set dynamically based on d… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.17.1.7 |
| hwH248ParaSecurity Indicates the authorization type.
Options:
1. noah(1) -no authorization
2. md5(2) -MD5
3. sha1(3) -SHA1 | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.17.1.8 |
| hwH248ParaSdpEncodeType Indicates the SDP encapsulation type.
Options:
1. text(1) -text
2. hex(2) -hex | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.17.1.9 |