hwH248MgSoftParameter36
HUAWEI-VOIP-H248-MIB ·
.1.3.6.1.4.1.2011.6.36.1.28.1.38
Object
column
r/w
Integer32
Parameter name index 36. Indicates the baseline interval of sending the registration message during the switchover between multi-homing MGCs. Default: 40 Unit: second
Context
- MIB
- HUAWEI-VOIP-H248-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.28.1.38- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwH248MgSoftParameterEntry
- Table
- hwH248MgSoftParameterTable
- Siblings
- 38
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-1800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwH248MgInterfaceIndex Indicates the MG interface index. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.1 |
| hwH248MgSoftParameter8 deprecated Parameter name index 8. It indicates the maximum count of DSPs supported by the VAG. It is unavailable in the P300. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.10 |
| hwH248MgSoftParameter9 deprecated Parameter name index 9. It indicates whether overload control is supported. It is unavailable in the P300.
Options:
1. yes(1) -support overload control
2. no(2) -not support over… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.11 |
| hwH248MgSoftParameter10 deprecated Parameter name index 10. It indicates whether the SDP contains the o=,s=,t= row. It is unavailable in the VSPV1R2.
Options:
1. yes(1) -SDP contain the o=,s=,t= row
2. no(2) -SDP … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.12 |
| hwH248MgSoftParameter11 Parameter name index 11. It indicates the stand-alone flag.
Options:
1. none(1) -not support stand alone
2. inner(2) -support inner call
3. emergency(3) -support emergenc… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.13 |
| hwH248MgSoftParameter12 deprecated Parameter name index 12. It indicates the stand-alone interruption flag. It is unavailable in the VSPV1R2.
Options:
1. no(1) -no
2. yes(2) -yes | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.14 |
| hwH248MgSoftParameter13 Parameter name index 13. It indicates the DMM match mode.
Options:
1. min(1) -shortest
2. max(2) -longest
3. auto(3) -protocol define
4. autoadapt(4) -auto ad… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.15 |
| hwH248MgSoftParameter14 deprecated Parameter name index 14. It indicates the value of the maximum transmission unit.
Options:
1. min(1) -min
2. max(5000) -max | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.16 |
| hwH248MgSoftParameter15 Parameter name index 15. It indicates the RTP source port filtering switch.
Options:
1. no(1) -not filter without remote media.
2. yes(2) -filter without remote media.
3. alw… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.17 |
| hwH248MgSoftParameter16 Parameter name index 16. It indicates the length of the RTP source port filtering timer. This parameter is valid only when the RTP filtering is enabled.
Range: 1-400(VSP is 1-30S… | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.18 |
| hwH248MgSoftParameter17 deprecated Parameter name index 17. It indicates the context protection switch. It is unavailable in the VSPV1R2.
Options:
1. yes(1) -the system releases the resource automatically
2. no(2) … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.19 |
| hwH248MgSoftParameter0 deprecated Parameter name index 0. It indicates whether the terminal ID of the MG interface is layered.
In the P300, the values of 1 and 2 are unavailable.
Options:
1. yes(1) -layered
2. no… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.2 |
| hwH248MgSoftParameter18 deprecated Parameter name index 18. It indicates the point-to-point fault report flag.
Options:
1. yes(1) -report
2. no(2) -not report | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.20 |
| hwH248MgSoftParameter19 deprecated Parameter name index 19. It indicates the point-to-multipoint fault report flag.
Options:
1. yes(1) -report
2. no(2) -not report | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.21 |
| hwH248MgSoftParameter20 deprecated Parameter name index 20. It indicates the protocol version negotiation strategy. It is unavailable in the VSPV1R2.
Options:
1. highest(1) -negotiate from the latest version
2. low… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.22 |
| hwH248MgSoftParameter21 deprecated Parameter name index 21. It is reserved in the system.
Options:
1. yes(1) -yes
2. no(2) -no | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.23 |
| hwH248MgSoftParameter22 Parameter name index 22. It indicates the type of the prompt tone that is played after MG is disconnected from MGC.
Options:
1. bT(1) -busy tone
2. eET(2) -equipment engaged tone… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.24 |
| hwH248MgSoftParameter23 Parameter name index 23.It indicates the length of synchronize-delay timer of port config state.
Default: 35
Unit: second | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.25 |
| hwH248MgSoftParameter24 Parameter name index 24. It indicates the number of rtp terminal. The maximum value is limited by product specification. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.26 |
| hwH248MgSoftParameter25 Parameter name index 25. It indicates max random value of the avalanche prevention system of the interface.
Default: 60000
Unit: millisecond | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.27 |
| hwH248MgSoftParameter26 Parameter name index 26. It indicates the local block tone type.
Options:
1. busyTone(1) -busy tone
2. congestionTone(2) -congestion tone
3. muteTone(3) -mute to… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.28 |
| hwH248MgSoftParameter27 Parameter name index 27. It indicates the remote block tone type.
Options:
1. busyTone(1) -busy tone
2. congestionTone(2) -congestion tone
3. muteTone(3) -mute t… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.29 |
| hwH248MgSoftParameter1 deprecated Parameter name index 1. It indicates whether the ongoing calls are maintained after MG is disconnected from MGC. (It is unavailable in the VSPV1R2.)
Options:
1. holding-to-resume(… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.3 |
| hwH248MgSoftParameter28 Parameter name index 28. It indicates the length of howler tone.
Default: 60
Unit: second | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.30 |
| hwH248MgSoftParameter29 Parameter name index 29. It indicates the length of message waiting tone.
Default: 3
Unit: second | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.31 |
| hwH248MgSoftParameter30 Parameter name index 30. It indicates the length of long connect alarm.
Default: 60
Unit: minute | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.32 |
| hwH248MgSoftParameter31 Parameter name index 31. It indicates whether MG send long connect alarm.
Options:
1. enable(1) -enable send long connect alarm
2. disable(2) -disable send long connect alarm… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.33 |
| hwH248MgSoftParameter32 Parameter name index 32. The minimal length of port auto register timer.
Default: 1800
Unit: second | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.28.1.34 |
| hwH248MgSoftParameter33 Parameter name index 33. It indicates whether MG shutdown heartbeat.
Options:
1. shutdown(1) -shutdown heartbeat
2. enable(2) -enable heartbeat
Default: enable(2) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.35 |
| hwH248MgSoftParameter34 Parameter name index 34. It indicates whether the gateway actively sets up or cancels the link for the BRA user when the softswitch issues the in-service or out-of-service messag… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.36 |
| hwH248MgSoftParameter35 Parameter name index 35. It indicates the mode for ISDN port is in service and out service.
Options:
1. both(1) -supports in-service and out-of-service in single channel … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.37 |
| hwH248MgSoftParameter37 Parameter name index 37. The switch for the pulse signal switch to the DTMF signal.
Options:
1. enable(1) -enable
2. disable(2) -disable
Default: disable(2) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.39 |
| hwH248MgSoftParameter2 Parameter name index 2. It indicates whether the MG interface supports multiple homing.
It is unavailable in the VSPV1R2.
Options:
1. no(1) -not support multiple homi… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.4 |
| hwH248MgSoftParameter3 deprecated Parameter name index 3. It indicates the MG interface interruption detecting mode. It is unavailable in the P300.
Options:
1. heartbeat(1) -heartbeat
2. messageRetrans… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.5 |
| hwH248MgSoftParameter4 Parameter name index 4. It indicates whether the wildcard is used in registration.
Options:
1. yes(1) -use wildcard in registration
2. no(2) -do not use wildcard in registration … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.6 |
| hwH248MgSoftParameter5 deprecated Parameter name index 5. It indicates whether the port fault and auto-block is reported to the MGC.
Options:
1. yes(1) -the port fault and auto-block is reported to the MGC
2. no(2… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.7 |
| hwH248MgSoftParameter6 Parameter name index 6. It indicates whether authentication is supported.
Options:
1. yes(1) -support authentication
2. no(2) -not support authentication
Default: no(2) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.8 |
| hwH248MgSoftParameter7 Parameter name index 7. It indicates whether the security header is supported.
Options:
1. yes(1) -support the security header
2. no(2) -not support the security header
Default:… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.28.1.9 |