hwH248MedGwyOperReasonCode
HUAWEI-VOIP-H248-MIB ·
.1.3.6.1.4.1.2011.6.36.1.1.1.46
Object
column
r/w
Integer32
Indicates the reason code of reset or shutdown interface.It's valid when set hwH248MedGwyAdminStatus to 4,5 or 6 at the same time. The leaf is optional,if not set,use the default reason code relates to the status, and the leaf does not support get. And the leaf is valid begin with VSPV200R002 version. 1:ServiceRestored(900) --reason code of reset MG interface 2:ColdBoot(901) --reason code of reset MG interface 3:WarmBoot(902) --reason code of reset MG interface 4:TerminationTakenOutOfService(905) --reason code of shutdown MG interface 5:MGImpendingFailure(908) --reason code of shutdown MG interface 6:CapabilitiesChange(917) --reason code of reset MG interface. If the value of the ACCESS clause is 'write-only', then the value of the MAX-ACCESS clause MUST be 'read-write', and the DESCRIPTION clause SHALL note that reading this object will result in implementation-specific results.
Context
- MIB
- HUAWEI-VOIP-H248-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.1.1.46- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwH248MedGwyConfigEntry
- Table
- hwH248MedGwyConfigTable
- Siblings
- 52
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1--1
range: 1-6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwH248MedGwyId Media Gateway ID. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.1 |
| hwH248MedGwyRegisterKey Indicates the key that is registered with the MGC. The key cannot be modified, read, or written by the operator without authority, so the hwH248MedGwyRegisterKey and hwH248MedGwyO… | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.10 |
| hwH248MedGwyOperKey Indicates the key for operating the MG. The hwH248MedGwyOperKey cannot be read. The functions of this key are as follows: 1) The hwH248MedGwyRegisterKey and hwH248MedGwyOperKey mu… | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.11 |
| hwH248MedGwyOperKeyNew Indicates the new operation key. The hwH248MedGwyOperKeyNew is a temporary variable, and cannot be read. If you query one hwH248MedGwyOperKeyNew, the system always returns a null … | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.12 |
| hwH248MedGwyAdminStatus Administrative status for this media gateway control group.
The default reason code relates to the status is as follows:
reset -- ColdBoot(901)
shutdown force … | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.13 |
| hwH248MedGwyOperStatus Current operational status of the signaling link.
Options:
1. up(1) -normal
2. local-closed(2) -local closed
3. fault(3) -fault
4. waiting-ack(4) -wating for ack
5. unknown(5) -un… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.14 |
| hwH248MedGwyRowStatus This is used to create new rows in this table, modify existing rows, and delete existing rows. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.36.1.1.1.15 |
| hwH248MedGwyLastChange The value of sysUpTime at the time the associated link entered its current operational status. If the current status was entered prior to the last re-initialization of the local n… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2011.6.36.1.1.1.16 |
| hwH248MedGwyProfile1 obsolete Indicates the name of the first H.248 profile of the MG (including / + version; version is a number). | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.17 |
| hwH248MedGwyProfile2 obsolete Indicates the name of the second H.248 profile of the MG (including / + version; version is a number). | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.18 |
| hwH248MedGwyProfile3 obsolete Indicates the name of the third H.248 profile of the MG (including / + version; version is a number). | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.19 |
| hwH248MedGwyDomainName Indicates the domain name of the MG, null means clear the value of this parameter. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.2 |
| hwH248MedGwyProfileUsing obsolete Indicates the name of the profile that is currently in use. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.20 |
| hwH248MedGwyTopH248Version obsolete Indicates the latest H.248 version that is supported by the MG. In the P300, this parameter is read-only.
Options:
1. v1(1) -version 1
2. v2(2) -version 2
3. v3(3) -version 3 | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.21 |
| hwH248MedGwyCurH248Version Indicates the current H.248 version of the MG.
Options:
1. v1(1) -version 1
2. v2(2) -version 2
3. v3(3) -version 3 | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.22 |
| hwH248MedGwyCurUsedDspNum Indicates the count of currently occupied DSPs of the interface. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.23 |
| hwH248MedGwyAuthInitialKey Indicates the authentication initial key. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.24 |
| hwH248MedGwyAuthMgId Indicates the authentication MG ID. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.25 |
| hwH248MedGwyAuthAlgorithm Indicates the authentication encryption algorithm.
Options:
1. md5(1) -MD5 | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.26 |
| hwH248MedGwy2833Encrypt Indicates the 2833 encryption key. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.27 |
| hwH248MedGwyCfgHeartBeatTimer Indicates the configured timer of the initial heartbeat.
Unit: second | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.28 |
| hwH248MedGwyCurHeartBeatTimer Indicates the current timer of the initial heartbeat.
The valid value range is 1..655, if the value is 0, the heartbeat is not started.
Unit: second | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.29 |
| hwH248MedGwyDesc Indicates the interface description. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.3 |
| hwH248MedGwyCallHoldTimer Indicates the timer of holding the call after the MG interface is interrupted.
Unit: second | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.30 |
| hwH248MedGwyMediaIPAddress1 Indicates the first media IP address of the MG. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.36.1.1.1.31 |
| hwH248MedGwyMIDType Indicates the MID type of the MG message.
Options:
1. ip4Address(1) -IP address
2. domainName(2) -domain name
3. deviceName(3) -device name | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.32 |
| hwH248MedGwyDeviceName Indicates the name of the MG device. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.33 |
| hwH248MedGwyheartbeattimes Indicates the count of heartbeat re-transmission. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.34 |
| hwH248MedGwyheartbeatretranstimer Indicates the interval of heartbeat re-transmission. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.35 |
| hwH248MedGwyCurMIDType Indicates the current MID type of the MG message.
Options:
1. ip4Address(1) -IP address
2. domainName(2) -domain name
3. deviceName(3) -device name | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.36 |
| hwH248MedGwyCurDeviceName Indicates the current name of the MG device. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.37 |
| hwH248MedGwyGracefulTimer Indicates the graceful timer of the MG interface.
This parameter is effective only when it is delivered with the shutdown graceful command.
0 means no time limit.
Unit: second. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.38 |
| hwH248MedGwyBeginNegotiationH248Version Indicates the H.248 version at the beginning of the negotiation.
0:depend on profile
1:v1
2:v2
3:v3 | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.39 |
| hwH248MedGwySigIPAddress1 Indicates the signaling IP address of the MG. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.36.1.1.1.4 |
| hwH248MedGwyProfileIndex Indicates the profile index configured for the MG. This parameter is effective only after the MG is reset. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.40 |
| hwH248MedGwyProfileIndexUsing Indicates the profile index that is currently used by the MG. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.41 |
| hwH248ProfileParaNegotiationSupport Indicates whether the MG supports the negotiated profile parameters.
Options:
1. disable(1) -not support
2. enable(2) -support | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.42 |
| hwH248MgProfileCfgName Indicates the configured name of the H.248 profile of the MG. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.43 |
| hwH248MgProfileNegoName Indicates the negotiated name of the H.248 profile of the MG. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.44 |
| hwH248MedGwyMediaIPAddress2 Indicates the second media IP of MG. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.36.1.1.1.45 |
| hwH248MedGwySigIPAddrDhcpClientIndex Dhcp Signal vlan id.
The valid value range is 1..4093,if the value is -1, the static signal ip will be used. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.47 |
| hwH248MedGwyMediaIPAddrDhcpClientIndex Dhcp Media vlan id.
The valid value range is 1..4093,if the value is -1, the static media ip will be used. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.48 |
| hwH248MedGwyRestrans Indicates whether the MG supports retrans.
Options:
1. enable(1) -support
2. disable(2) -not support | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.49 |
| hwH248MedGwyIPAddress2 The second IP address that the Media Gateway Controller will use to communicate with the Media Gateway.
The system does not support setting it now. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.36.1.1.1.5 |
| hwH248MedGwySigIPAddrName Dynamic signal IP name. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.50 |
| hwH248MedGwyMediaIPAddrName Dynamic media IP name. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.1.1.51 |
| hwH248MedGwyKeepActiveFlag The switch for transfer connect regular renovate.
Options:
1. enable(1) -enable
2. disable(2) -disable
Default: disable(2) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.52 |
| hwH248MedGwyKeepActivePeriod Indicates the configured period of transfer connect regular renovate.
Unit: second
Default:30 | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.53 |
| hwH248MedGwySigUDPPort Signalling UDP port that the Media Gateway Controller will use to communicate with the Media Gateway.
65535 means this parameter is not configurated. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.1.1.6 |
| hwH248MedGwyProtocol Type of the control protocol in use.
Options:
1. h248(1) -H.248 | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.7 |
| hwH248MedGwyCodeType Indicates the coding type.
Options:
1. txt(1) -text
2. bin(2) -binary | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.8 |
| hwH248MedGwyTransMode Indicates the transmission mode.
Options:
1. noConfig(-1) -not configured
2. tcp(1) -tcp
3. udp(2) -udp
4. alf-udp(3) -udp with alf
5. sctp(4) -sctp | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.1.1.9 |