HUAWEI-VOIP-COMMON-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
33
Rows
33
Columns
250
hwMgDspOperateTable
table.1.3.6.1.4.1.2011.6.36.1.8
·
1 row entry
·
6 columns
This table is used to config the operation of DSP channel. The index of this table is hwMgDspOperIndex.
This table is used to config the operation of DSP channel.
The index of this entry is hwMgDspOperIndex.
The index of this entry is hwMgDspOperIndex.
Indexes
hwMgDspOperIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwMgDspOperIndex
Indicates the shelf/slot/subboard/channel index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.8.1.1 |
||||||||||||||||
|
hwMgDspOperChannelState
Indicates the channel status.
Options: 1. idle(1) -idle 2. g711(2) -G.711 3. fault(3) -faulty 4. probit(4) -prohibited 5. pcmLoopback(5) -PCM loopback 6. ipLoopback(6) -IP loopback 7. all(7) -full rate 8. wastage(8) -w… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.8.1.2 |
||||||||||||||||
|
hwMgDspOperChannelWorkMode
Indicates the channel status.
The parameter is effective only when the channel status is busy. Options: 1. all(1) -full rate 2. g711(2) -G.711 3. wastage(3) -wastage |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.8.1.3 |
||||||||||||||||
|
hwMgDspOperStateChange
Indicates the channel status changing time.
|
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.6.36.1.8.1.4 |
||||||||||||||||
|
hwMgDspOperAdminStatus
Indicates the operation type.
Options: 1. prohibit(1) -prohibit 2. unprohibit(2) -unprohibit 3. pcmLoopback(3) -PCM loopback 4. ipLoopback(4) -IP loopback 5. noLoopback(5) -cancel loopback. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.8.1.5 |
||||||||||||||||
|
hwMgDspJBInPerCent
Indicates the current fill level of the jitterbuffer in percent.
|
Unsigned32 Constraints: range: 0-100 |
.1.3.6.1.4.1.2011.6.36.1.8.1.6 |
hwMgDspStatisticsTable
table.1.3.6.1.4.1.2011.6.36.1.9
·
1 row entry
·
10 columns
This table is used to query the DSP channel statistics. The index of this table is hwMgDspStatisticsIndex.
This table is used to query the DSP channel statistics.
The index of this entry is hwMgDspStatisticsIndex.
The index of this entry is hwMgDspStatisticsIndex.
Indexes
hwMgDspStatisticsIndex
| Column | Syntax | OID |
|---|---|---|
|
hwMgDspStatisticsIndex
Bits 31-26 (six bits): shelf index
Bits 25-20 (six bits): slot index Bits 19-16 (four bits): subboard index Bits 15-0 (16 bits): all F When the index is all F, it indicates that the statistics of all the channels… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.1 |
|
hwMgDspStatisticsTotalNum
Indicates the total number of DSP channels.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.2 |
|
hwMgDspStatisticsFreeNum
Indicates the number of idle channels.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.3 |
|
hwMgDspStatisticsG711Num
Indicates the number of occupied DSP channels of the G.711.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.4 |
|
hwMgDspStatisticsAllNum
Indicates the number of occupied DSP channels of the full rate.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.5 |
|
hwMgDspStatisticsWastageNum
Indicates the number of DSP channels of the wastage.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.6 |
|
hwMgDspStatisticsFaultNum
Indicates the number of faulty DSP channels.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.7 |
|
hwMgDspStatisticsLoopNum
Indicates the number of DSP channels in the loopback.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.8 |
|
hwMgDspStatisticsForbiddenNum
Indicates the number of prohibited DSP channels.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.9 |
|
hwMgDspSystemReserved
deprecated
Reserved for the system.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.9.1.10 |
hwMgRingTypeMapTable
table.1.3.6.1.4.1.2011.6.36.1.11
·
1 row entry
·
6 columns
This table is used to set the ring type mapping. The indexes of this table are hwMgRingTypeMapMgId, hwMgRingTypeMapRingId.
This table is used to set the ring type mapping.
The indexes of this entry are hwMgRingTypeMapMgId, hwMgRingTypeMapRingId.
The indexes of this entry are hwMgRingTypeMapMgId, hwMgRingTypeMapRingId.
Indexes
hwMgRingTypeMapMgId hwMgRingTypeMapRingId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwMgRingTypeMapMgId
Indicates the MG ID.
The range of MG ID from 0 to 16777215 is for AG system, value of 33554431 is only for PBX system and the value input from 16777215 to 33554431 is invalid. |
Integer32 Constraints: range: 0-33554431 |
.1.3.6.1.4.1.2011.6.36.1.11.1.1 |
||||||||||||
|
hwMgRingTypeMapRingId
Indicates the ring ID.
The range of ring ID from 0 to 15 is for AG system,When the system is PBX the range of ring ID is 0 to 15,and 255 is also valid. When the value is 255 and row status is 4, means the system allo… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.6.36.1.11.1.2 |
||||||||||||
|
hwMgRingTypeMapCascadeRingType
Indicates the cadence ring type.
Enumerated types: 1-Null, 2-Normal ring 1:4, 3-Special ring 1:2, 4-Special ring 0.4:0.2:0.4:4, 5-Long ring, 6-Special ring 1.2:2, 7-HK ring 1:3, 8-HK CNTRX 0.4:0.2:0.4:0.2:0.4:3.0, 9-H… |
Integer32r/w Constraints: range: 1-31 |
.1.3.6.1.4.1.2011.6.36.1.11.1.3 |
||||||||||||
|
hwMgRingTypeMapInitRingType
Indicates the initial ring type.
Enumeration type: 1-Null, 2-Normal ring (FSK) 1:4, 3-Special ring (FSK) 1:2, 4-Special ring (FSK) 0.4:0.2:0.4:4, 5-Special ring (FSK) 1.2:2, 6-HK ring (FSK) 1:3, 7-HK CNTRX (FSK) 0.4:0… |
Integer32r/w Constraints: range: 1-28 |
.1.3.6.1.4.1.2011.6.36.1.11.1.4 |
||||||||||||
|
hwMgRingTypeMapRowStatus
Indicates the row status (the SIP supports only 4 and 6).
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.11.1.5 |
||||||||||||
|
hwMgRingTypeMapName
Indicates the ring type mapping name.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.36.1.11.1.6 |
hwMgCallInfoTable
table.1.3.6.1.4.1.2011.6.36.1.12
·
1 row entry
·
43 columns
This table is use to query the information in the call. The index of this table is hwMgCallInfoIndex.
This table is use to query the information in the call.
The index of this entry is hwMgCallInfoIndex.
The index of this entry is hwMgCallInfoIndex.
Indexes
hwMgCallInfoIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwMgCallInfoIndex
Indicates the shelf/slot/port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRTPPort
Indicates the local RTP port.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.36.1.12.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoDSPPlace
Indicates the DSP channel (the shelf/slot/channel index).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoCodec
Indicates the enumerated definition of the VoiceCode. Note that several items in the enumerated definition are not consecutive.
In the definition below, G723Low(16) and G723High(17) need not be distinguished and can be … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.12.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoPackagTime
Indicates the codex packetizing duration.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoVAD
Indicates voice activity detection.
Options: 1. true(1) -detect voice activity 2. false(2) -not detect voice activity |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.12.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoEC
Indicates echo cancel.
Options: 1. true(1) -echo cancel 2. false(2) -disable echo cancel |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.12.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoJitBuffer
Indicates the local JitBuffer value.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoTransGain
Indicates the transmit gain (0-20 correspond to -10 dB to +10 dB).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRecvGain
Indicates the receive gain (0-15 correspond to -10 dB to +5 dB).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRemoteRTPPort
Indicates the remote RTP port.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.36.1.12.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoLocalIP
Indicates the local IP address. The value 255.255.255.255 is returned if the entry is invalid.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.6.36.1.12.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRemoteIP
Indicates the remote IP address. The value 255.255.255.255 is returned if the entry is invalid.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.6.36.1.12.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoDuration
Indicates the occupied duration.
Unit: second |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRTCPState
Indicates the RTCP status (whether it is enabled).
Options: 1. on(1) -enable rtcp 2. off(2) -disable rtcp 3. notReported(3) -not report rtcp |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.12.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRmtPackagTime
Indicates the remote packetizing duration.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRcvPackageNum
Indicates the count of received packets.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoSndPackageNum
Indicates the count of sent packets.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRcvOctsNum
Indicates the count of received octets.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoSndOctsNum
Indicates the count of sent octets.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoLoopDelay
Indicates the loop delay.
Unit: millisecond |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoLocalJitter
Indicates the local Jitter.
Unit: millisecond |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRmtJitter
Indicates the remote Jitter.
Unit: millisecond |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoLocalLossRate
Indicates the local packet loss rate (%). 1 means 1%.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRmtLossRate
Indicates the remote packet loss rate (%). 1 means 1%.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoMos
MOS(MOS:Mean Opinion Score) value.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoVlanID
Vlan ID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoVlanPriority
Vlan priority.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoQoSStrategy
QoS strategy.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoQoSValue
QoS value.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoNplr
Network Packet Loss Rate(%). 1 means 1%.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoJdr
Jitter Buffer Discard Rate(%). 1 means 1%.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRtd
RTCP Round-Trip Delay.
Unit: millisecond |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoEsd
End System Delay.
Unit: millisecond |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoSl
Signal Level.
Unit: db |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoNl
Noise Level.
Unit: db |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.36 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRerl
Residual Echo Return Loss.
Unit: db |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.37 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoRFactor
R Factor.
Range: 0-100 |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.38 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoMoslq
Estimated MOSLQ(a voice quality metric on a scale from 1 to 5).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.39 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoBld
Burst Loss Density(%). 1 means 1%.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.40 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoGd
Gap Duration.
Unit: millisecond |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.41 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoBd
Burst Duration.
Unit: millisecond |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.42 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
hwMgCallInfoGld
Gap Loss Density(%). 1 means 1%.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.12.1.43 |
hwUserStatisticTable
table.1.3.6.1.4.1.2011.6.36.1.36
·
1 row entry
·
9 columns
This table is used to query the statistics of online subscribers. The index of this table is hwUserStatisticMgId.
This table is used to query the statistics of online subscribers.
The index of this entry is hwUserStatisticMgId.
The index of this entry is hwUserStatisticMgId.
Indexes
hwUserStatisticMgId
| Column | Syntax | OID |
|---|---|---|
|
hwUserStatisticMgId
Indicates the MG ID.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.36.1.1 |
|
hwUserStatisticPstn
Indicates the count of online PSTN subscribers.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.36.1.2 |
|
hwUserStatisticFax
Indicates the count of online fax subscribers.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.36.1.3 |
|
hwUserStatisticModem
Indicates the count of online modem subscribers.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.36.1.4 |
|
hwUserStatisticBra
Indicates the count of online BRA subscribers.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.36.1.5 |
|
hwUserStatisticPra
Indicates the count of online PRA subscribers.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.36.1.6 |
|
hwUserStatisticDpnss
Indicates the count of online DPNSS subscribers.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.36.1.7 |
|
hwUserStatisticDass2
Indicates the count of online DASS2 subscribers.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.36.1.8 |
|
hwUserStatisticR2
Indicates the count of online R2 subscribers.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.36.1.9 |
hwE2ETraceTaskTable
table.1.3.6.1.4.1.2011.6.36.1.45
·
1 row entry
·
13 columns
This table is used to config the E2E tracing task. The index of this table is hwE2ETraceTaskID.
This table is used to config the E2E tracing task.
The index of this entry is hwE2ETraceTaskID.
The index of this entry is hwE2ETraceTaskID.
Indexes
hwE2ETraceTaskID
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwE2ETraceTaskID
Indicates the tracing task ID.
Bit 31 (1 bit): 0 Bit 30 (1 bit): the protocol type (1-H.248; 0-MGCP) Bits 29-16 (14 bits): the terminal ID Bits 15-0 (16 bits): the RID that is delivered by the softswitch |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.2011.6.36.1.45.1.1 |
||||||||||
|
hwE2ETraceTaskOperType
Indicates the operation type.
Options: 1. delete(1) -delete |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.45.1.2 |
||||||||||
|
hwE2ETraceTaskSessionID
Indicates the session ID.
|
Integer32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.6.36.1.45.1.3 |
||||||||||
|
hwE2ETraceTaskMsgReptCyc
Indicates the message reporting period.
|
Integer32 Constraints: range: 30-4294967295 |
.1.3.6.1.4.1.2011.6.36.1.45.1.4 |
||||||||||
|
hwE2ETraceTaskChkCyc
Indicates the task checking period.
|
Integer32 Constraints: range: 30-4294967295 |
.1.3.6.1.4.1.2011.6.36.1.45.1.5 |
||||||||||
|
hwE2ETraceTaskMsgType
Indicates the message type.
Options: 1. h248(24) -H.248 2. mgcp(25) -MGCP |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.45.1.6 |
||||||||||
|
hwE2ETraceTaskFTPLnkState
Indicates the FTP connection status.
Options: 1. establishing(0) -establishing 2. data(1) -transfering data 3. trying(2) -trying 4. releasing(3) -releasing 5. idle(4) -idle |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.45.1.7 |
||||||||||
|
hwE2ETraceTaskURLInfoPort
Indicates the port number of the URL message.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.36.1.45.1.8 |
||||||||||
|
hwE2ETraceTaskURLInfoIP
Indicates the IP address of the URL message.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.6.36.1.45.1.9 |
||||||||||
|
hwE2ETraceTaskURLInfoPath
Indicates the path of the URL message.
|
OctetString Constraints: range: 1-256 |
.1.3.6.1.4.1.2011.6.36.1.45.1.10 |
||||||||||
|
hwE2ETraceTaskURLInfoFileName
Indicates the file name of the URL message.
|
OctetString Constraints: range: 1-128 |
.1.3.6.1.4.1.2011.6.36.1.45.1.11 |
||||||||||
|
hwE2ETraceTaskUserMgID
Indicates the interface ID of the subscriber traced by the tracing task.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.45.1.12 |
||||||||||
|
hwE2ETraceTaskUserTerminationID
Indicates the terminal ID of the tracing task subscriber.
|
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.2011.6.36.1.45.1.13 |
hwTidTemplateConfigTable
table.1.3.6.1.4.1.2011.6.36.1.65
·
1 row entry
·
6 columns
This table is used to config terminal ID template. The index of this table is hwTidTemplateId.
This table is used to config terminal ID template.
The index of this entry is hwTidTemplateId.
The index of this entry is hwTidTemplateId.
Indexes
hwTidTemplateId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwTidTemplateId
Indicates the TID profile index.
TID profiles 0-18 are the default profiles in the system. The default TID profiles can be referenced but can not be added, modified or deleted. TID profiles 19-31 are reserved in the sys… |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.2011.6.36.1.65.1.1 |
||||||||||||
|
hwTidFormat
Indicates the format string of the TID profile.
|
OctetStringr/w Constraints: range: 2-64 |
.1.3.6.1.4.1.2011.6.36.1.65.1.2 |
||||||||||||
|
hwTidParameterlist
Indicates the parameter list of the TID profile.
|
OctetStringr/w Constraints: range: 1-64 |
.1.3.6.1.4.1.2011.6.36.1.65.1.3 |
||||||||||||
|
hwTidTemplateName
Indicates the TID profile name. The profile name must be unique.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.65.1.4 |
||||||||||||
|
hwTidTemplateRowStatus
Indicates the row status of the TID profile. Profiles 0-31 cannot be added, deleted, or modified.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.65.1.5 |
||||||||||||
|
hwIsNeedToConfigTID
Indicates whether the TID needs to be input when adding the subscriber who uses this profile.
Options: 1. no(1) -TID needs not to be input when adding the subscriber 2. yes(2) -TID must be input when adding the subscr… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.65.1.6 |
hwFaxParaTable
table.1.3.6.1.4.1.2011.6.36.1.69.1
·
1 row entry
·
13 columns
This table is used to config the fax parameter. The index of this table is hwFaxParaVgwId.
This table is used to config the fax parameter.
The index of this entry is hwFaxParaVgwId.
The index of this entry is hwFaxParaVgwId.
Indexes
hwFaxParaVgwId
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwFaxParaVgwId
Indicates the interface ID.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.69.1.1.1 |
||||||||
|
hwFaxMode
deprecated
Indicates the fax transmission mode. 1-Transparent transmission; 2-Auto-negotiation T.38; 3-V3 flow; 4-Stand-alone transparent transmission; 5-V5 flow; 6-Self-switch T.38. To be compatible with the previous versions, th…
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.69.1.1.2 |
||||||||
|
hwFaxPacketInterval10ms
Enable packet interval of fax to use only 10ms or not.
Options: 1. enable(1) -enable 2. disable(2) -disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.3 |
||||||||
|
hwFaxRedundancyFlag
deprecated
Use fax redundancy parameter or not .1:enable,to use. 2:disable,not to use. This leaf only valid in sip transparent fax.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.69.1.1.4 |
||||||||
|
hwFaxNegoMode
The negotiate mode of fax.
Options: 1. negotiate(1) -negotiate 2. selfswitch(2) -do not negotiate |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.5 |
||||||||
|
hwFaxTransMode
Indicates the fax transmission mode.
Options: 1. thoroughly(1) -use voice codec 2. t38(2) - use T.38 codec Default: thoroughly(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.6 |
||||||||
|
hwFaxRfc2198NegoMode
deprecated
Use fax redundancy parameter or not.
Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no Initiative Start |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.7 |
||||||||
|
hwFaxRfc2198StartMode
deprecated
Whether the fax support the RFC2198 Smart Startup.
Options: 1. smart2198(1) -smart start 2198 2. ordinary2198(2) -ordinary 2198 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.8 |
||||||||
|
hwFaxParaVbdCodec
Indicates the codec of VBD.
Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.9 |
||||||||
|
hwFaxParaVbdPtType
Indicates the payload type of VBD.
Options: 1. static(1) -static payload type 2. dynamic(2) -dynamic payload type |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.10 |
||||||||
|
hwFaxTransEventType
deprecated
Indicates the mode of sending fax event, whether support the RFC2833.
Options: 1. negoStart(1) -negotiation start 2. fixedStart(2) -fix start 3. noInitiativeStart(3) -not initiative start |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.11 |
||||||||
|
hwFaxVbdAttributeType
Indicate the format of session attribute lines when starting fax VBD Negotiation.
Options: 1. v152(1) -v.152 format 2. chinatelecom(2) -chinatelecom format 3. extchinatelecom(3) -extchinatelecom format 4. ietf(4) -ietf … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.12 |
||||||||
|
hwFaxRtpInterval
Indicates the default RTP packet time of DSP channel.
Options: 1. packettime5ms(1) -5ms 2. packettime10ms(2) -10ms 3. packettime20ms(3) -20ms 4. packettime30ms(4) -30ms Unit: millisecond |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.1.1.13 |
hwModemParaTable
table.1.3.6.1.4.1.2011.6.36.1.69.2
·
1 row entry
·
14 columns
This table is used to config the modem parameter. The index of this table is hwModemParaVgwId.
This table is used to config the modem parameter.
The index of this entry is hwModemParaVgwId.
The index of this entry is hwModemParaVgwId.
Indexes
hwModemParaVgwId
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwModemParaVgwId
Indicates the interface ID.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.69.2.1.1 |
||||||||
|
hwModemMode
deprecated
Indicates the modem transmission mode. 1-Negotiation mode; 2-Stand-alone mode.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.69.2.1.2 |
||||||||
|
hwModemRedundancyFlag
deprecated
Indicates the flag of using the modem redundancy parameter. 1-enable; 2-disable .
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.69.2.1.3 |
||||||||
|
hwModemPacketInterval10ms
Enable packet interval of modem to use only 10ms or not.
Options: 1. enable(1) -enable 2. disable(2) -disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.4 |
||||||||
|
hwModemNegoMode
The negotiate mode of fax.
Options: 1. negotiate(1) -negotiate 2. selfswitch(2) -do not negotiate |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.5 |
||||||||
|
hwModemTransMode
Indicates the fax transmission mode.
Options: 1. thoroughly(1) -thoroughly transmission 2. relay(2) -Relay mode Default: thoroughly(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.6 |
||||||||
|
hwModemRfc2198NegoMode
deprecated
Use modem redundancy parameter or not.
Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.7 |
||||||||
|
hwModemRfc2198StartMode
deprecated
whether the modem support the RFC2198 Smart Startup.
Options: 1. smart2198(1) -smart 2198 2. ordinary2198(2) -ordinary 2198 |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.8 |
||||||||
|
hwModemParaVbdCodec
Indicates the codec of VBD.
Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.9 |
||||||||
|
hwModemParaVbdPtType
Indicates the payload type of VBD.
Options: 1. static(1) -static payload type 2. dynamic(2) -dynamic payload type |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.10 |
||||||||
|
hwModemTransEventType
deprecated
Indicates the mode of sending fax event, whether support the RFC2833.
Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.11 |
||||||||
|
hwModemVbdAttributeType
Indicate the format of session attribute lines when starting modem VBD Negotiation.
Options: 1. v152(1) -V.152 2. chinatelecom(2) -china telecom 3. extchinatelecom(3) -extend china telecom 4. ietf(4) -ietf |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.12 |
||||||||
|
hwModemRtpInterval
Indicates the default RTP packet time of DSP channel.
Options: 1. packettime5ms(1) -5ms 2. packettime10ms(2) -10ms 3. packettime20ms(3) -20ms 4. packettime30ms(4) -30ms Unit: millisecond |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.13 |
||||||||
|
hwModemParaDtmfFallbackVoice
Enable fallback to voice mode or not, when detect DTMF from IP side.
Options: 1. enable(1) -enable 2. disable(2) -disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.2.1.14 |
hwRfc2833Table
table.1.3.6.1.4.1.2011.6.36.1.69.3
·
1 row entry
·
6 columns
This table is used to config the rfc2833 parameter. The index of this table is hwRfc2833VgwId.
This table is used to config the rfc2833 parameter.
The index of this entry is hwRfc2833VgwId.
The index of this entry is hwRfc2833VgwId.
Indexes
hwRfc2833VgwId
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwRfc2833VgwId
Indicates the interface ID.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.69.3.1.1 |
||||||
|
hwRfc2833NegoMode
Indicates the start mode of the rfc2833.
Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.3.1.2 |
||||||
|
hwRfc2833FaxModem
Indicates the flag of fax and modem event using rfc2833 parameter.
Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.3.1.3 |
||||||
|
hwRfc2833FlashHook
Indicates the flag of flash hook event using rfc2833 parameter.
Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.3.1.4 |
||||||
|
hwRfc2833Dtmf
Indicates the flag of dtmf using rfc2833 parameter.
Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.3.1.5 |
||||||
|
hwRfcComplied
Indicates the type of RFC standard compliance.
Options: 1. rfc2833(1) - comply with RFC2833 2. rfc4733(2) - comply with RFC4733 Default: rfc2833(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.3.1.6 |
hwRfc2198Table
table.1.3.6.1.4.1.2011.6.36.1.69.4
·
1 row entry
·
6 columns
This table is used to config the rfc2198 parameter. The index of this table is hwRfc2198VgwId.
This table is used to config the rfc2198 parameter.
The index of this entry is hwRfc2198VgwId.
The index of this entry is hwRfc2198VgwId.
Indexes
hwRfc2198VgwId
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwRfc2198VgwId
Indicates the interface ID.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.69.4.1.1 |
||||||
|
hwRfc2198NegoMode
Indicates the start mode of the rfc2198.
Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.4.1.2 |
||||||
|
hwRfc2198StartMode
Indicates the start mode of the rfc2198.
Options: 1. smart2198(1) -smart start RFC2198 2. ordinary2198(2) -start RFC2198 ordinary |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.4.1.3 |
||||||
|
hwRfc2198Rfc2833
Indicates the flag of rfc2833 with using rfc2198.
Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.4.1.4 |
||||||
|
hwRfc2198Vbd
Indicates the flag of the VBD using rfc2198.
Options: 1. enable(1) -enable 2. disable(2) -disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.4.1.5 |
||||||
|
hwRfc2198Voice
Indicates the flag of voice using rfc2198.
Options: 1. enable(1) -enable 2. disable(2) -disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.4.1.6 |
hwDtmfParaTable
table.1.3.6.1.4.1.2011.6.36.1.69.5
·
1 row entry
·
2 columns
This table is used to config the dtmf parameter. The index of this table is hwDtmfVgwId.
This table is used to config the dtmf parameter.
The index of this entry is hwDtmfVgwId.
The index of this entry is hwDtmfVgwId.
Indexes
hwDtmfVgwId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwDtmfVgwId
Indicates the interface ID.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.69.5.1.1 |
||||
|
hwDtmfTransMode
Indicates the transmission mode of DTMF.
Options: 1. thoroughly(1) -transparent transmission 2. erase(2) -erase DTMF Default: thoroughly(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.69.5.1.2 |
hwServiceNumCfgTable
table.1.3.6.1.4.1.2011.6.36.1.154
·
1 row entry
·
3 columns
This table is used to config the binding between service number and DSP parameters template. The index of this table is hwServiceNumMap.
This table is used to config the binding between service number and DSP parameters template.
The index of this entry is hwServiceNumMap.
The index of this entry is hwServiceNumMap.
Indexes
hwServiceNumMap
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwServiceNumMap
Indicates the service number digital map.
|
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.2011.6.36.1.154.1.1 |
||||||||||||
|
hwDspParaTemplateName
Indicates the dsp parameters template name
|
OctetStringr/w Constraints: range: 1-31 |
.1.3.6.1.4.1.2011.6.36.1.154.1.2 |
||||||||||||
|
hwServiceNumRowStatus
Indicates the row status.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.154.1.3 |
.1.3.6.1.4.1.2011.6.36.1.155
·
1 row entry
·
15 columns
This table is used to config the dsp parameters template. The index of this table is hwDspTemplateName.
This table is used to config the dsp parameters template.
The index of this entry is hwDspTemplateName.
The index of this entry is hwDspTemplateName.
Indexes
hwDspTemplateName
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDspTemplateName
Indicates the dsp parameters template name.
|
OctetString Constraints: range: 1-31 |
.1.3.6.1.4.1.2011.6.36.1.155.1.1 |
||||||||||||||
|
hwDspEc
Indicates the echo cotrol.
Options: 1. open(1) -open 2. close(2) -close 3. invalid(256) -invalid value, use global config Default: invalid(256) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.2 |
||||||||||||||
|
hwDspJbMode
Indicates the jitterbuffer mode.
Options: 1. adapted(1) -adapted mode 2. fixed(2) -fixed mode 3. invalid(256) -invalid value, use global config Default: invalid(256) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.3 |
||||||||||||||
|
hwDspNlp
Indicates the NLP mode.
Options: 1. close(1) -close mode 2. normal(2) -normal mode 3. enhanced(3) -enhanced mode 4. reduced(4) -reduced mode 5. ecgain(5) -ecgain mode 6. dtmfec(6) -DTMF echo elimination mode 7. inva… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.4 |
||||||||||||||
|
hwDspWorkMode
Indicates the dsp workmode.
Options: 1. voice(1) -voice mode 2. fax(2) -fax mode 3. modem(3) -modem mode 4. invalid(256) -invalid value, use global config Default: invalid(256) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.5 |
||||||||||||||
|
hwDspSc
Indicates the silence cotrol.
Options: 1. open(1)-open 2. close(2) -close 3. invalid(256)-invalid value, use global config Default: invalid(256) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.6 |
||||||||||||||
|
hwDspTemplateRowStatus
Indicates the row status.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.7 |
||||||||||||||
|
hwDspInputGain
Indicates the input gain of DSP chip:
-1 -- invalid value, use global config 0-15 -- correspond to -10 dB to +5 dB Default: -1 |
Integer32r/w Constraints: range: -1-15 |
.1.3.6.1.4.1.2011.6.36.1.155.1.8 |
||||||||||||||
|
hwDspOutputGain
Indicates the output gain of DSP chip:
-1 -- invalid value, use global config; 0-20 -- correspond to -10 dB to +10 dB; Default: -1 |
Integer32r/w Constraints: range: -1-20 |
.1.3.6.1.4.1.2011.6.36.1.155.1.9 |
||||||||||||||
|
hwDspDtmfPara
Indicates the transmission mode of DTMF.
Options: 1. globalConfig(1) -global config; 2. rfc2833(2) -2833 transmission; 3. erase(3) -erase DTMF; 4. rfc2833with2198(4) -2833with2198. Default: globalConfig(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.10 |
||||||||||||||
|
hwDsp2833ForDataevent
Indicates the mode of sending fax/modem event.
Options: 1. enable(1) -2833 2. globalConfig(2) -global config Default: globalConfig(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.11 |
||||||||||||||
|
hwDspSpecialFlow
Indicates the dsp special flow.
0 -- intelligent telephone special flow: filter RTP messages and only processs 2833 messages 1 -- intelligent telephone special flow: only processs DTMF events in 2833 messages 2 -- EC sp… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.6.36.1.155.1.12 |
||||||||||||||
|
hwDsp2198ForVbd
Flag of locally starting the 2198 redundancy VBD function.
Options: 1. enable(1) -enable 2198 for vbd 2. globalConfig(2) -global config: use the global config |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.13 |
||||||||||||||
|
hwDspTemplateFixedJbUpImmediately
Enable dsp fixed JB adjust upward immediately or not.
Options: 1. enable(1) -enable 2. disable(2) -disable 3. invalid(256)-invalid value, use global config Default: invalid(256) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.14 |
||||||||||||||
|
hwDsp2198ForVoice
Flag of locally starting the 2198 redundancy VOICE function.
Options: 1. enable(1) -enable 2198 for voice 2. globalConfig(2) -global config: use the global config |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.155.1.15 |
hwPreDigitMapConfigTable
table.1.3.6.1.4.1.2011.6.36.1.156
·
1 row entry
·
8 columns
This table is used to config local global digitmap for sip and h248 interface. The indexes of this table are hwPreDigitMapName, hwPreDigitMapSliceNo.
This table is used to config local global digitmap for sip and h248 interface.
The indexes of this entry are hwPreDigitMapName, hwPreDigitMapSliceNo.
The indexes of this entry are hwPreDigitMapName, hwPreDigitMapSliceNo.
Indexes
hwPreDigitMapName hwPreDigitMapSliceNo
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPreDigitMapName
Indicates the digitmap name.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.156.1.1 |
||||||||||||
|
hwPreDigitMapSliceNo
Serial number for slice.
High 8 bits for total number of slices, low 8 bits for sequence number of slices. |
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.36.1.156.1.2 |
||||||||||||
|
hwPreDigitMapNewName
Indicates the new digitmap name. used for modifing digitmap name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.156.1.3 |
||||||||||||
|
hwPreDigitMapType
Indicate digit map type.
For SIP it may be normal(1), emergency(2), scc(3), directCentrex(4), secondCentrex(5). For H248 it should only be normal(1). Options: 1. normal(1) -normal 2. emergency(2) -emergency 3. scc(3) … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.156.1.4 |
||||||||||||
|
hwPreDigitMapBody
Indicate body of DigitMap, use by add,modify,delete operation.
|
OctetStringr/w Constraints: range: 1-256 |
.1.3.6.1.4.1.2011.6.36.1.156.1.5 |
||||||||||||
|
hwPreDigitMapRowStatus
Indicates the row status of the PreDigitMap.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.156.1.6 |
||||||||||||
|
hwPreDigitMapTotalSlice
Indicates the total slice of the PreDigitMap.
|
Unsigned32 Constraints: range: 0-254 |
.1.3.6.1.4.1.2011.6.36.1.156.1.7 |
||||||||||||
|
hwPreDigitMapProtocol
Indicates the digitmap protocol.
Options: 1. h248(1) -h248 protocol 2. sip(2) -sip protocol |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.156.1.8 |
hwVoipDynIPNameTable
table.1.3.6.1.4.1.2011.6.36.1.157
·
1 row entry
·
3 columns
This table is used to query the voip dynamic media and signal IP name. The indexes of this table are hwVoipDynIPNameType, hwVoipDynIPNameIndex.
This table is used to query the voip dynamic media and signal IP name.
The indexes of this entry are hwVoipDynIPNameType, hwVoipDynIPNameIndex.
The indexes of this entry are hwVoipDynIPNameType, hwVoipDynIPNameIndex.
Indexes
hwVoipDynIPNameType hwVoipDynIPNameIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwVoipDynIPNameType
Indicates dynamic IP name type.
Options: 1. mediaIP(1) -dynamic media IP name 2. signalIP(2) -dynamic signal IP name |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.157.1.1 |
||||
|
hwVoipDynIPNameIndex
Indicates dynamic IP name list index.
|
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.6.36.1.157.1.2 |
||||
|
hwVoipDynIPName
Indicates dynamic media IP name.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.157.1.3 |
hwTlsParaCfgTable
table.1.3.6.1.4.1.2011.6.36.1.185
·
1 row entry
·
6 columns
This table is used to set the tls attribute. The index of this table is hwTlsParaInterfaceId.
This table is used to set the tls attribute.
The index of this entry is hwTlsParaInterfaceId.
The index of this entry is hwTlsParaInterfaceId.
Indexes
hwTlsParaInterfaceId
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwTlsParaInterfaceId
Indicates the MG ID.
The range of MG ID from 0 to 16777215 is for AG system, value of 33554431 is only for PBX system and the value input from 16777215 to 33554431 is invalid. |
Integer32 Constraints: range: 0-33554431 |
.1.3.6.1.4.1.2011.6.36.1.185.1.1 |
||||||||
|
hwTlsParaTlsVersion
Indicates the version of TLS.
Options: 1. tlsv10(1) -TLS v1.0 2. tlsv11(2) -TLS v1.1 3. auto-negotiate(3) -auto negotiate Default: auto-negotiate(3) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.185.1.2 |
||||||||
|
hwTlsParaAuthMode
Indicates the authentication mode of TLS.
Options: 1. anonymous(1) -Anonymous 2. server(2) -Server 3. client(3) -Client 4. both(4) -Both Default: anonymous(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.185.1.3 |
||||||||
|
hwTlsParaRootCA
Indicates the name of root certificate.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.185.1.4 |
||||||||
|
hwTlsParaCert
Indicates the name of certificate.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.185.1.5 |
||||||||
|
hwTlsParaKey
Indicates the name of key.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.185.1.6 |
hwTlsRunStateInfoTable
table.1.3.6.1.4.1.2011.6.36.1.186
·
1 row entry
·
8 columns
This table is used to display the tls running information. The index of this table is hwTlsRunStateInfoSessionID.
This table is used to display the tls running information.
The index of this entry is hwTlsRunStateInfoSessionID.
The index of this entry is hwTlsRunStateInfoSessionID.
Indexes
hwTlsRunStateInfoSessionID
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwTlsRunStateInfoSessionID
TLS session ID
Constructed by Protocol-Type, Proxy-index, SIP-Interface-ID; Format:xyzzzzzz(Hex) a) x for Protocol-Type: SIP(0); b) y for Proxy-index: SIP Proxy index; c) z for SIP-Interface-ID: zzzzzz for SIP interfa… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.186.1.1 |
||||||||
|
hwTlsRunStateInfoVersion
Indicates the version of TLS.
Options: 1. tlsv10(1) -TLS v1.0 2. tlsv11(2) -TLS v1.1 3. auto-negotiate(3) -auto negotiate |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.186.1.2 |
||||||||
|
hwTlsRunStateInfoAuthMode
Indicates the authentication mode of TLS.
Options: 1. anonymous(1) -Anonymous 2. server(2) -Server 3. client(3) -Client 4. both(4) -Both |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.186.1.3 |
||||||||
|
hwTlsRunStateInfoRootCA
Indicates the name of root certificate.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.186.1.4 |
||||||||
|
hwTlsRunStateInfoCert
Indicates the name of client certificate.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.186.1.5 |
||||||||
|
hwTlsRunStateInfoKey
Indicates the name of client key.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.186.1.6 |
||||||||
|
hwTlsRunStateInfoState
Indicates the state of handshake.
Options: 1. idle(1) -Idle 2. handshaking(2) -Handshaking 3. handshakeSuccess(3) -HandshakeSuccess 4. handshakeFailure(4) -HandshakeFailure |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.186.1.7 |
||||||||
|
hwTlsRunStateInfoCurrentCipher
Indicates the name of cipher.
|
OctetString Constraints: range: 0-128 |
.1.3.6.1.4.1.2011.6.36.1.186.1.8 |
hwTlsCertificateTable
table.1.3.6.1.4.1.2011.6.36.1.187
·
1 row entry
·
4 columns
This table is used to config and query the certificates in system. The indexes of this table are hwTlsCertificateType and hwTlsCertificateIndex.
This table is used to config and query the certificates in system.
The indexes of this entry are hwTlsCertificateType and hwTlsCertificateIndex.
The indexes of this entry are hwTlsCertificateType and hwTlsCertificateIndex.
Indexes
hwTlsCertificateType hwTlsCertificateIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwTlsCertificateType
Indicates the type of certificate.
Options: 1. 0 -Root certificate 2. 1 -Certificate 3. 2 -Key |
Integer32 Constraints: range: 0-2 |
.1.3.6.1.4.1.2011.6.36.1.187.1.1 |
||||||||||||
|
hwTlsCertificateIndex
Indicates the index of certificate.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.6.36.1.187.1.2 |
||||||||||||
|
hwTlsParaCertificateName
Indicates the name of certificate.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.187.1.3 |
||||||||||||
|
hwTlsCertificateRowStatus
This is used to create new rows in this table, modify existing rows, and delete existing rows.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.187.1.4 |
hwIpTrkGrpFaxParaTable
table.1.3.6.1.4.1.2011.6.36.1.188
·
1 row entry
·
9 columns
This table is used to config the fax parameter of a IP truck group. The index of this table is hwIpTrkGrpFaxParaGrpName.
This table is used to config the fax parameter of a IP truck group.
The index of this entry is hwIpTrkGrpFaxParaGrpName.
The index of this entry is hwIpTrkGrpFaxParaGrpName.
Indexes
hwIpTrkGrpFaxParaGrpName
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwIpTrkGrpFaxParaGrpName
Indicates the IP truck group name.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.36.1.188.1.1 |
||||||||
|
hwIpTrkGrpFaxMode
Indicates the fax transmission mode. 1-Transparent transmission; 2-Auto-negotiation T.38; 3-V3 flow; 4-Stand-alone transparent transmission; 5-V5 flow; 6-Self-switch T.38. To be compatible with the previous versions, th…
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.188.1.2 |
||||||||
|
hwIpTrkGrpFaxRedundancyFlag
Use fax redundancy parameter or not .1:enable,to use. 2:disable,not to use. This leaf only valid in sip transparent fax.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.188.1.4 |
||||||||
|
hwIpTrkGrpFaxNegoMode
The negotiate mode of fax.
Options: 1. negotiate(1) -negotiate 2. selfswitch(2) -do not negotiate |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.188.1.5 |
||||||||
|
hwIpTrkGrpFaxTransMode
Indicates the fax transmission mode.
Options: 1. thoroughly(1) -use voice codec 2. t38(2) - use T.38 codec Default: thoroughly(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.188.1.6 |
||||||||
|
hwIpTrkGrpFaxParaVbdCodec
Indicates the codec of VBD.
Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.188.1.9 |
||||||||
|
hwIpTrkGrpFaxParaVbdPtType
Indicates the payload type of VBD.
Options: 1. static(1) -static payload type 2. dynamic(2) -dynamic payload type |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.188.1.10 |
||||||||
|
hwIpTrkGrpFaxVbdAttributeType
Indicate the format of session attribute lines when starting fax VBD Negotiation.
Options: 1. v152(1) -v.152 format 2. chinatelecom(2) -chinatelecom format 3. extchinatelecom(3) -extchinatelecom format 4. ietf(4) -ietf … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.188.1.12 |
||||||||
|
hwIpTrkGrpFaxRtpInterval
Indicates the default RTP packet time of DSP channel.
Options: 1. packettime5ms(1) -5ms 2. packettime10ms(2) -10ms 3. packettime20ms(3) -20ms 4. packettime30ms(4) -30ms Unit: millisecond |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.188.1.13 |
hwIpTrkGrpModemParaTable
table.1.3.6.1.4.1.2011.6.36.1.189
·
1 row entry
·
9 columns
This table is used to config the modem parameter of a IP truck group. The index of this table is hwIpTrkGrpModemParaGrpName.
This table is used to config the modem parameter of a IP truck group.
The index of this entry is hwIpTrkGrpModemParaGrpName.
The index of this entry is hwIpTrkGrpModemParaGrpName.
Indexes
hwIpTrkGrpModemParaGrpName
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwIpTrkGrpModemParaGrpName
Indicates the IP truck group name.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.36.1.189.1.1 |
||||||||
|
hwIpTrkGrpModemMode
Indicates the modem transmission mode. 1-Negotiation mode; 2-Stand-alone mode.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.189.1.2 |
||||||||
|
hwIpTrkGrpModemRedundancyFlag
Indicates the flag of using the modem redundancy parameter. 1-enable; 2-disable .
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.189.1.3 |
||||||||
|
hwIpTrkGrpModemNegoMode
The negotiate mode of fax.
Options: 1. negotiate(1) -negotiate 2. selfswitch(2) -do not negotiate |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.189.1.5 |
||||||||
|
hwIpTrkGrpModemTransMode
Indicates the fax transmission mode.
Options: 1. thoroughly(1) -thoroughly transmission 2. relay(2) -Relay mode Default: thoroughly(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.189.1.6 |
||||||||
|
hwIpTrkGrpModemParaVbdCodec
Indicates the codec of VBD.
Options: 1. g711A(1) -G.711A 2. g711U(2) -G.711U |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.189.1.9 |
||||||||
|
hwIpTrkGrpModemParaVbdPtType
Indicates the payload type of VBD.
Options: 1. static(1) -static payload type 2. dynamic(2) -dynamic payload type |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.189.1.10 |
||||||||
|
hwIpTrkGrpModemVbdAttributeType
Indicate the format of session attribute lines when starting modem VBD Negotiation.
Options: 1. v152(1) -V.152 2. chinatelecom(2) -china telecom 3. extchinatelecom(3) -extend china telecom 4. ietf(4) -ietf |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.189.1.12 |
||||||||
|
hwIpTrkGrpModemRtpInterval
Indicates the default RTP packet time of DSP channel.
Options: 1. packettime5ms(1) -5ms 2. packettime10ms(2) -10ms 3. packettime20ms(3) -20ms 4. packettime30ms(4) -30ms Unit: millisecond |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.189.1.13 |
hwIpTrkGrpRfc2833Table
table.1.3.6.1.4.1.2011.6.36.1.190
·
1 row entry
·
5 columns
This table is used to config the rfc2833 parameter of a IP truck group. The index of this table is hwIpTrkGrpRfc2833GrpName.
This table is used to config the rfc2833 parameter of a IP truck group.
The index of this entry is hwIpTrkGrpRfc2833GrpName.
The index of this entry is hwIpTrkGrpRfc2833GrpName.
Indexes
hwIpTrkGrpRfc2833GrpName
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwIpTrkGrpRfc2833GrpName
Indicates the IP truck group name.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.36.1.190.1.1 |
||||||
|
hwIpTrkGrpRfc2833NegoMode
Indicates the start mode of the rfc2833.
Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.190.1.2 |
||||||
|
hwIpTrkGrpRfc2833FaxModem
Indicates the flag of fax and modem event using rfc2833 parameter.
Options: 1. enable(1) -enable 2. disable(2) -disable Default: enable(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.190.1.3 |
||||||
|
hwIpTrkGrpRfc2833FlashHook
Indicates the flag of flash hook event using rfc2833 parameter.
Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.190.1.4 |
||||||
|
hwIpTrkGrpRfc2833Dtmf
Indicates the flag of dtmf using rfc2833 parameter.
Options: 1. enable(1) -enable(1) 2. disable(2) -disable(2) Default: enable(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.190.1.5 |
hwIpTrkGrpRfc2198Table
table.1.3.6.1.4.1.2011.6.36.1.191
·
1 row entry
·
6 columns
This table is used to config the rfc2198 parameter of a IP truck group. The index of this table is hwIpTrkGrpRfc2198GrpName.
This table is used to config the rfc2198 parameter of a IP truck group.
The index of this entry is hwIpTrkGrpRfc2198GrpName.
The index of this entry is hwIpTrkGrpRfc2198GrpName.
Indexes
hwIpTrkGrpRfc2198GrpName
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwIpTrkGrpRfc2198GrpName
Indicates the IP truck group name.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.36.1.191.1.1 |
||||||
|
hwIpTrkGrpRfc2198NegoMode
Indicates the start mode of the rfc2198.
Options: 1. negoStart(1) -negotiate start 2. fixedStart(2) -fixed start 3. noInitiativeStart(3) -no initiative start |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.191.1.2 |
||||||
|
hwIpTrkGrpRfc2198StartMode
Indicates the start mode of the rfc2198.
Options: 1. smart2198(1) -smart start RFC2198 2. ordinary2198(2) -start RFC2198 ordinary |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.191.1.3 |
||||||
|
hwIpTrkGrpRfc2198Rfc2833
Indicates the flag of rfc2833 with using rfc2198.
Options: 1. enable(1) -enable 2. disable(2) -disable Default: disable(2) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.191.1.4 |
||||||
|
hwIpTrkGrpRfc2198Vbd
Indicates the flag of the VBD using rfc2198.
Options: 1. enable(1) -enable 2. disable(2) -disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.191.1.5 |
||||||
|
hwIpTrkGrpRfc2198Voice
Indicates the flag of voice using rfc2198.
Options: 1. enable(1) -enable 2. disable(2) -disable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.191.1.6 |
hwIpTrkGrpDtmfParaTable
table.1.3.6.1.4.1.2011.6.36.1.192
·
1 row entry
·
2 columns
This table is used to config the dtmf parameter of a IP truck group. The index of this table is hwIpTrkGrpDtmfGrpName.
This table is used to config the dtmf parameter of a IP truck group.
The index of this entry is hwIpTrkGrpDtmfGrpName.
The index of this entry is hwIpTrkGrpDtmfGrpName.
Indexes
hwIpTrkGrpDtmfGrpName
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwIpTrkGrpDtmfGrpName
Indicates the IP truck group name.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.36.1.192.1.1 |
||||
|
hwIpTrkGrpDtmfTransMode
Indicates the transmission mode of DTMF.
Options: 1. thoroughly(1) -transparent transmission 2. erase(2) -erase DTMF Default: thoroughly(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.192.1.2 |
hwDspResourceTypeTable
table.1.3.6.1.4.1.2011.6.36.1.193
·
1 row entry
·
2 columns
This table is used to config the DSP resource type. The index of this table is hwDspResourceTypeIndex.
This table is used to config the DSP resource type.
The index of this entry is hwDspResourceTypeIndex.
The index of this entry is hwDspResourceTypeIndex.
Indexes
hwDspResourceTypeIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwDspResourceTypeIndex
Bits 31-26 (six bits): shelf index
Bits 25-20 (six bits): slot index Bits 19-16 (four bits): subboard index Bits 15-0 (16 bits): chip index |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.6.36.1.193.1.1 |
||||||
|
hwDspResourceTypeValue
Indicates the type of resource type.
Options: 1. default(1) - default resource 2. instant(2) - instant conference resource 3. reserved(3) - reserved conference resource |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.193.1.2 |
.1.3.6.1.4.1.2011.6.36.1.194
·
1 row entry
·
4 columns
This table is used to config the digitmap group. The index of this table is hwDigitMapGroupName.
This table is used to config the digitmap group.
The index of this entry is hwDigitMapGroupName.
The index of this entry is hwDigitMapGroupName.
Indexes
hwDigitMapGroupName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDigitMapGroupName
Indicates the digitmap group name.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.194.1.1 |
||||||||||||
|
hwDigitMapGroupNewName
Indicates the new name of digitmap group.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.194.1.2 |
||||||||||||
|
hwDigitMapGroupReferDigitMapNameList
Indicates the digitmap name list in digitmap group.
|
OctetStringr/w Constraints: range: 1-264 |
.1.3.6.1.4.1.2011.6.36.1.194.1.3 |
||||||||||||
|
hwDigitMapGroupRowStatus
Indicates the row status of digitmap group.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.194.1.4 |
.1.3.6.1.4.1.2011.6.36.1.196
·
1 row entry
·
3 columns
This table is used to config the default type for the common ring. The index of this table is hwMgRingDefaultMgcParaMgId.
This table is used to config the default type for the common ring.
The index of this entry is hwMgRingDefaultMgcParaMgId.
The index of this entry is hwMgRingDefaultMgcParaMgId.
Indexes
hwMgRingDefaultMgcParaMgId
| Column | Syntax | OID |
|---|---|---|
|
hwMgRingDefaultMgcParaMgId
Indicates the MG ID.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.196.1.1 |
|
hwMgRingDefaultMgcparaForRing
Indicates default peer para of the ring.
Options: 255. Indicates resume system default config. |
Integer32r/w Constraints: range: 0-15range: 255-255 |
.1.3.6.1.4.1.2011.6.36.1.196.1.2 |
|
hwMgRingDefaultMgcparaForMwi
Indicates default peer para of the mwi ring.
Options: 255. Indicates resume system default config. |
Integer32r/w Constraints: range: 0-15range: 255-255 |
.1.3.6.1.4.1.2011.6.36.1.196.1.3 |
.1.3.6.1.4.1.2011.6.36.1.197
·
1 row entry
·
6 columns
This table is used to set the tls attribute. The index of this table is hwIpTrkGrpTlsParaGrpName.
This table is used to set the tls attribute.
The index of this entry is hwIpTrkGrpTlsParaGrpName.
The index of this entry is hwIpTrkGrpTlsParaGrpName.
Indexes
hwIpTrkGrpTlsParaGrpName
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwIpTrkGrpTlsParaGrpName
Indicates the IP truck group name.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.2011.6.36.1.197.1.1 |
||||||||
|
hwIpTrkGrpTlsParaTlsVersion
Indicates the version of TLS.
Options: 1. tlsv10(1) -TLS v1.0 2. tlsv11(2) -TLS v1.1 3. auto-negotiate(3) -auto negotiate Default: auto-negotiate(3) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.197.1.2 |
||||||||
|
hwIpTrkGrpTlsParaAuthMode
Indicates the authentication mode of TLS.
Options: 1. anonymous(1) -Anonymous 2. server(2) -Server 3. client(3) -Client 4. both(4) -Both Default: anonymous(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.197.1.3 |
||||||||
|
hwIpTrkGrpTlsParaRootCA
Indicates the name of root certificate.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.197.1.4 |
||||||||
|
hwIpTrkGrpTlsParaCert
Indicates the name of certificate.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.197.1.5 |
||||||||
|
hwIpTrkGrpTlsParaKey
Indicates the name of key.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.6.36.1.197.1.6 |
.1.3.6.1.4.1.2011.6.36.1.198
·
1 row entry
·
3 columns
This table is used to set the default short ring type and AOCE ring type. The index of this table is hwMgRingDefaultRingparaMgId.
This table is used to set the default short ring type and AOCE ring type.
The index of this entry is hwMgRingDefaultRingparaMgId.
The index of this entry is hwMgRingDefaultRingparaMgId.
Indexes
hwMgRingDefaultRingparaMgId
| Column | Syntax | OID |
|---|---|---|
|
hwMgRingDefaultRingparaMgId
Indicates the MG ID.
|
Integer32 Constraints: range: 0-16777215 |
.1.3.6.1.4.1.2011.6.36.1.198.1.1 |
|
hwMgShortRingType
Indicates the short ring type.
Enumerated types: 1-Null, 2-Normal ring 1:4, 3-Special ring 1:2, 4-Special ring 0.4:0.2:0.4:4, 5-Long ring, 6-Special ring 1.2:2, 7-HK ring 1:3, 8-HK CNTRX 0.4:0.2:0.4:0.2:0.4:3.0, 9-HK … |
Integer32r/w Constraints: range: 1-58 |
.1.3.6.1.4.1.2011.6.36.1.198.1.2 |
|
hwMgAOCERingType
Indicates the AOCE ring type.
Enumeration type: 1-Null, 2-Normal ring (FSK) 1:4, 3-Special ring (FSK) 1:2, 4-Special ring (FSK) 0.4:0.2:0.4:4, 5-Special ring (FSK) 1.2:2, 6-HK ring (FSK) 1:3, 7-HK CNTRX (FSK) 0.4:0.2:0… |
Integer32r/w Constraints: range: 1-28 |
.1.3.6.1.4.1.2011.6.36.1.198.1.3 |
hwVGWNumberChangeTable
table.1.3.6.1.4.1.2011.6.36.1.199
·
1 row entry
·
7 columns
This table is used to set the scheme od number change. The index of this table is hwVGWNumberChangeName.
This table is used to set the scheme od number change.
The index of this entry is hwVGWNumberChangeName.
The index of this entry is hwVGWNumberChangeName.
Indexes
hwVGWNumberChangeName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwVGWNumberChangeName
Indicates the name of number change.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.199.1.1 |
||||||||||||
|
hwVGWNumberChangeType
Indicates the change type of number change.
Options: 1. insert(1) - insert new number operation 2. replace(2) - replace number operation 3. delete(3) - delete number operation 4. translation-rule-set(4) - translation ru… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.199.1.2 |
||||||||||||
|
hwVGWNumberChangeStartPos
Indicates the change start position of source number.
|
Integer32r/w Constraints: range: 1-64range: 255-255 |
.1.3.6.1.4.1.2011.6.36.1.199.1.3 |
||||||||||||
|
hwVGWNumberChangeNewNumber
Indicates the modify number of number change.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.199.1.4 |
||||||||||||
|
hwVGWNumberChangeChangeLen
Indicates the modify length of number change,255 means to set this value invalid.
|
Integer32r/w Constraints: range: 1-64range: 255-255 |
.1.3.6.1.4.1.2011.6.36.1.199.1.5 |
||||||||||||
|
hwVGWNumberChangeRowStatus
Indicates the row status.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.199.1.6 |
||||||||||||
|
hwVGWNumberChangeTranslationRuleSetName
Indicates the translation rule set name of number change.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.199.1.7 |
.1.3.6.1.4.1.2011.6.36.1.201
·
1 row entry
·
4 columns
This table is used to set the translation rule. The index of this table is hwTranslationRuleName.
This table is used to set the translation rule.
The index of this entry is hwTranslationRuleName.
The index of this entry is hwTranslationRuleName.
Indexes
hwTranslationRuleName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwTranslationRuleName
Indicates the name of translation rule.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.201.1.1 |
||||||||||||
|
hwTranslationRuleMatchPattern
Indicates the match pattern of translation rule.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.201.1.2 |
||||||||||||
|
hwTranslationRuleReplacePattern
Indicates the replace pattern of translation rule.
|
OctetStringr/w Constraints: range: 1-64 |
.1.3.6.1.4.1.2011.6.36.1.201.1.3 |
||||||||||||
|
hwTranslationRuleRowStatus
Indicates the row status.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.201.1.4 |
.1.3.6.1.4.1.2011.6.36.1.202
·
1 row entry
·
3 columns
This table is used to config the translation rule set. The index of this table is hwTranslationRuleSetName.
This table is used to config the translation rule set.
The index of this entry is hwTranslationRuleSetName.
The index of this entry is hwTranslationRuleSetName.
Indexes
hwTranslationRuleSetName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwTranslationRuleSetName
Indicates the name of translation rule set.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.2011.6.36.1.202.1.1 |
||||||||||||
|
hwTranslationRuleList
Indicates the name and the priority of the translation rules in a translation rule set.
|
OctetStringr/w Constraints: range: 0-591 |
.1.3.6.1.4.1.2011.6.36.1.202.1.2 |
||||||||||||
|
hwTranslationRuleSetRowStatus
Indicates the row status of translation rule set.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.6.36.1.202.1.3 |
hwMgStreamQosConfigTable
table.1.3.6.1.4.1.2011.6.36.1.203
·
1 row entry
·
6 columns
This table is used to set the IP stream QOS of different VAG. The indexes of this table are hwMgStreamQosCfgProtoType and hwMgStreamQosCfgInterfaceId.
This table is used to set the IP stream QOS of different VAG.
The indexes of this entry are hwMgStreamQosCfgProtoType and hwMgStreamQosCfgInterfaceId.
The indexes of this entry are hwMgStreamQosCfgProtoType and hwMgStreamQosCfgInterfaceId.
Indexes
hwMgStreamQosCfgProtoType hwMgStreamQosCfgInterfaceId
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
hwMgStreamQosCfgProtoType
Indicates the protocol of the interface to config IP stream QOS.
Options: 1. iua(1) - the interface ID is IUA LinkNO. 2. h248(2) - the interface ID is VAG NO. of H248 interface 3. sip(3) - the interface ID is VAG NO. o… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.6.36.1.203.1.1 |
||||||
|
hwMgStreamQosCfgInterfaceId
Indicates the IP stream QOS interface ID.
if Protocol Type is iua(1), this parameter for IUA LinkNo(0..15); if Protocol Type is h248(2), this parameter for H248 interface ID(0..16777215); if Protocol Type is sip(3), thi… |
Integer32 Constraints: range: 1-16777215 |
.1.3.6.1.4.1.2011.6.36.1.203.1.2 |
||||||
|
hwMgStreamQosCfgNormalMediaDscp
Indicates the QOS DSCP value of normal call media stream,255 means to set this value invalid.
|
Integer32r/w Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.2011.6.36.1.203.1.3 |
||||||
|
hwMgStreamQosCfgEmergencyMediaDscp
Indicates the QOS DSCP value of emergency call media stream,255 means to set this value invalid.
|
Integer32r/w Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.2011.6.36.1.203.1.4 |
||||||
|
hwMgStreamQosCfgNormalSignalingDscp
Indicates the QOS DSCP value of normal call signaling stream,255 means to set this value invalid.
|
Integer32r/w Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.2011.6.36.1.203.1.5 |
||||||
|
hwMgStreamQosCfgEmergencySignalingDscp
Indicates the QOS DSCP value of emergency call signaling stream,255 means to set this value invalid.
|
Integer32r/w Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.2011.6.36.1.203.1.6 |