hwDspSpecialFlow
HUAWEI-VOIP-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.36.1.155.1.12
Object
column
r/w
Integer32
Indicates the dsp special flow. 0 -- intelligent telephone special flow: filter RTP messages and only processs 2833 messages 1 -- intelligent telephone special flow: only processs DTMF events in 2833 messages 2 -- EC special process: enables V.21 flow 3 -- EC special process: enables V.22 flow 4 -- EC special process: enables V.23 flow 5 -- EC special process: enables Bell 103 flow 6-254 -- reserved values 255 -- no dsp special flow Default: 255
Context
- MIB
- HUAWEI-VOIP-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.155.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwDspParaTemplateCfgEntry
- Table
- hwDspParaTemplateCfgTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDspTemplateName Indicates the dsp parameters template name. | column | OctetString | .1.3.6.1.4.1.2011.6.36.1.155.1.1 |
| hwDspDtmfPara Indicates the transmission mode of DTMF.
Options:
1. globalConfig(1) -global config;
2. rfc2833(2) -2833 transmission;
3. erase(3) -erase DTMF;
4. rfc2833with2198(4) -2833with… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.10 |
| hwDsp2833ForDataevent Indicates the mode of sending fax/modem event.
Options:
1. enable(1) -2833
2. globalConfig(2) -global config
Default: globalConfig(2) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.11 |
| hwDsp2198ForVbd Flag of locally starting the 2198 redundancy VBD function.
Options:
1. enable(1) -enable 2198 for vbd
2. globalConfig(2) -global config: use the global config | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.13 |
| hwDspTemplateFixedJbUpImmediately Enable dsp fixed JB adjust upward immediately or not.
Options:
1. enable(1) -enable
2. disable(2) -disable
3. invalid(256)-invalid value, use global config
Default: invalid(256) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.14 |
| hwDsp2198ForVoice Flag of locally starting the 2198 redundancy VOICE function.
Options:
1. enable(1) -enable 2198 for voice
2. globalConfig(2) -global config: use the global config | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.15 |
| hwDspEc Indicates the echo cotrol.
Options:
1. open(1) -open
2. close(2) -close
3. invalid(256) -invalid value, use global config
Default: invalid(256) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.2 |
| hwDspJbMode Indicates the jitterbuffer mode.
Options:
1. adapted(1) -adapted mode
2. fixed(2) -fixed mode
3. invalid(256) -invalid value, use global config
Default: invalid(256) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.3 |
| hwDspNlp Indicates the NLP mode.
Options:
1. close(1) -close mode
2. normal(2) -normal mode
3. enhanced(3) -enhanced mode
4. reduced(4) -reduced mode
5. ecgain(5) -ecgain mode
6. dtmfec… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.4 |
| hwDspWorkMode Indicates the dsp workmode.
Options:
1. voice(1) -voice mode
2. fax(2) -fax mode
3. modem(3) -modem mode
4. invalid(256) -invalid value, use global config
Default: invalid(256) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.5 |
| hwDspSc Indicates the silence cotrol.
Options:
1. open(1)-open
2. close(2) -close
3. invalid(256)-invalid value, use global config
Default: invalid(256) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.155.1.6 |
| hwDspTemplateRowStatus Indicates the row status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.36.1.155.1.7 |
| hwDspInputGain Indicates the input gain of DSP chip:
-1 -- invalid value, use global config
0-15 -- correspond to -10 dB to +5 dB
Default: -1 | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.155.1.8 |
| hwDspOutputGain Indicates the output gain of DSP chip:
-1 -- invalid value, use global config;
0-20 -- correspond to -10 dB to +10 dB;
Default: -1 | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.155.1.9 |