hwMgCallInfoLocalLossRate

HUAWEI-VOIP-COMMON-MIB · .1.3.6.1.4.1.2011.6.36.1.12.1.24
MIB view Table view

Object

column SNMPv2-SMIInteger32 
Indicates the local packet loss rate (%). 1 means 1%.

Context

MIB
HUAWEI-VOIP-COMMON-MIB
OID
.1.3.6.1.4.1.2011.6.36.1.12.1.24
Type
column
Access
readonly
Status
current
Parent
hwMgCallInfoEntry
Table
hwMgCallInfoTable
Siblings
42

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwMgCallInfoIndex
Indicates the shelf/slot/port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.1
hwMgCallInfoRecvGain
Indicates the receive gain (0-15 correspond to -10 dB to +5 dB).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.10
hwMgCallInfoRemoteRTPPort
Indicates the remote RTP port.
columnInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.11
hwMgCallInfoLocalIP
Indicates the local IP address. The value 255.255.255.255 is returned if the entry is invalid.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.36.1.12.1.12
hwMgCallInfoRemoteIP
Indicates the remote IP address. The value 255.255.255.255 is returned if the entry is invalid.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.36.1.12.1.13
hwMgCallInfoDuration
Indicates the occupied duration. Unit: second
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.14
hwMgCallInfoRTCPState
Indicates the RTCP status (whether it is enabled). Options: 1. on(1) -enable rtcp 2. off(2) -disable rtcp 3. notReported(3) -not report rtcp
columnEnumeration.1.3.6.1.4.1.2011.6.36.1.12.1.15
hwMgCallInfoRmtPackagTime
Indicates the remote packetizing duration.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.16
hwMgCallInfoRcvPackageNum
Indicates the count of received packets.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.17
hwMgCallInfoSndPackageNum
Indicates the count of sent packets.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.18
hwMgCallInfoRcvOctsNum
Indicates the count of received octets.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.19
hwMgCallInfoRTPPort
Indicates the local RTP port.
columnInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.2
hwMgCallInfoSndOctsNum
Indicates the count of sent octets.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.20
hwMgCallInfoLoopDelay
Indicates the loop delay. Unit: millisecond
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.21
hwMgCallInfoLocalJitter
Indicates the local Jitter. Unit: millisecond
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.22
hwMgCallInfoRmtJitter
Indicates the remote Jitter. Unit: millisecond
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.23
hwMgCallInfoRmtLossRate
Indicates the remote packet loss rate (%). 1 means 1%.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.25
hwMgCallInfoMos
MOS(MOS:Mean Opinion Score) value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.26
hwMgCallInfoVlanID
Vlan ID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.27
hwMgCallInfoVlanPriority
Vlan priority.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.28
hwMgCallInfoQoSStrategy
QoS strategy.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.29
hwMgCallInfoDSPPlace
Indicates the DSP channel (the shelf/slot/channel index).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.3
hwMgCallInfoQoSValue
QoS value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.30
hwMgCallInfoNplr
Network Packet Loss Rate(%). 1 means 1%.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.31
hwMgCallInfoJdr
Jitter Buffer Discard Rate(%). 1 means 1%.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.32
hwMgCallInfoRtd
RTCP Round-Trip Delay. Unit: millisecond
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.33
hwMgCallInfoEsd
End System Delay. Unit: millisecond
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.34
hwMgCallInfoSl
Signal Level. Unit: db
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.35
hwMgCallInfoNl
Noise Level. Unit: db
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.36
hwMgCallInfoRerl
Residual Echo Return Loss. Unit: db
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.37
hwMgCallInfoRFactor
R Factor. Range: 0-100
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.38
hwMgCallInfoMoslq
Estimated MOSLQ(a voice quality metric on a scale from 1 to 5).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.39
hwMgCallInfoCodec
Indicates the enumerated definition of the VoiceCode. Note that several items in the enumerated definition are not consecutive. In the definition below, G723Low(16) and G723High(1…
columnEnumeration.1.3.6.1.4.1.2011.6.36.1.12.1.4
hwMgCallInfoBld
Burst Loss Density(%). 1 means 1%.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.40
hwMgCallInfoGd
Gap Duration. Unit: millisecond
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.41
hwMgCallInfoBd
Burst Duration. Unit: millisecond
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.42
hwMgCallInfoGld
Gap Loss Density(%). 1 means 1%.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.43
hwMgCallInfoPackagTime
Indicates the codex packetizing duration.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.5
hwMgCallInfoVAD
Indicates voice activity detection. Options: 1. true(1) -detect voice activity 2. false(2) -not detect voice activity
columnEnumeration.1.3.6.1.4.1.2011.6.36.1.12.1.6
hwMgCallInfoEC
Indicates echo cancel. Options: 1. true(1) -echo cancel 2. false(2) -disable echo cancel
columnEnumeration.1.3.6.1.4.1.2011.6.36.1.12.1.7
hwMgCallInfoJitBuffer
Indicates the local JitBuffer value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.8
hwMgCallInfoTransGain
Indicates the transmit gain (0-20 correspond to -10 dB to +10 dB).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.36.1.12.1.9