hwModemVbdAttributeType
HUAWEI-VOIP-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.36.1.69.2.1.12
Object
column
r/w
Enumeration
Indicate the format of session attribute lines when starting modem VBD Negotiation. Options: 1. v152(1) -V.152 2. chinatelecom(2) -china telecom 3. extchinatelecom(3) -extend china telecom 4. ietf(4) -ietf
Context
- MIB
- HUAWEI-VOIP-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.36.1.69.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwModemParaEntry
- Table
- hwModemParaTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | v152 |
2 | chinatelecom |
3 | extchinatelecom |
4 | ietf |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwModemParaVgwId Indicates the interface ID. | column | Integer32 | .1.3.6.1.4.1.2011.6.36.1.69.2.1.1 |
| hwModemParaVbdPtType Indicates the payload type of VBD.
Options:
1. static(1) -static payload type
2. dynamic(2) -dynamic payload type | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.10 |
| hwModemTransEventType deprecated Indicates the mode of sending fax event, whether support the RFC2833.
Options:
1. negoStart(1) -negotiate start
2. fixedStart(2) -fixed start
3. noInitiativeStart(3) -no initiativ… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.11 |
| hwModemRtpInterval Indicates the default RTP packet time of DSP channel.
Options:
1. packettime5ms(1) -5ms
2. packettime10ms(2) -10ms
3. packettime20ms(3) -20ms
4. packettime30ms(4) -30ms
Unit: mil… | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.13 |
| hwModemParaDtmfFallbackVoice Enable fallback to voice mode or not, when detect DTMF from IP side.
Options:
1. enable(1) -enable
2. disable(2) -disable | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.14 |
| hwModemMode deprecated Indicates the modem transmission mode. 1-Negotiation mode; 2-Stand-alone mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.36.1.69.2.1.2 |
| hwModemRedundancyFlag deprecated Indicates the flag of using the modem redundancy parameter. 1-enable; 2-disable . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.36.1.69.2.1.3 |
| hwModemPacketInterval10ms Enable packet interval of modem to use only 10ms or not.
Options:
1. enable(1) -enable
2. disable(2) -disable | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.4 |
| hwModemNegoMode The negotiate mode of fax.
Options:
1. negotiate(1) -negotiate
2. selfswitch(2) -do not negotiate | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.5 |
| hwModemTransMode Indicates the fax transmission mode.
Options:
1. thoroughly(1) -thoroughly transmission
2. relay(2) -Relay mode
Default: thoroughly(1) | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.6 |
| hwModemRfc2198NegoMode deprecated Use modem redundancy parameter or not.
Options:
1. negoStart(1) -negotiate start
2. fixedStart(2) -fixed start
3. noInitiativeStart(3) -no initiative start | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.7 |
| hwModemRfc2198StartMode deprecated whether the modem support the RFC2198 Smart Startup.
Options:
1. smart2198(1) -smart 2198
2. ordinary2198(2) -ordinary 2198 | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.8 |
| hwModemParaVbdCodec Indicates the codec of VBD.
Options:
1. g711A(1) -G.711A
2. g711U(2) -G.711U | column | Enumeration | .1.3.6.1.4.1.2011.6.36.1.69.2.1.9 |