HUAWEI-L2IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
88

hwL2IfTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.3 · 1 row entry · 32 columns
Open in standard view 
This table is used to query and configure the basic attributes of a Layer 2 interface, including number, index, type, default VLAN ID, and the MAC address learning status.
hwL2IfEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1
Entries of extended Huawei private interface information table
Indexes
hwL2IfPortNum
Column Syntax OID
hwL2IfPortNum
Number of layer2 interface port, a unique value,
for each port. It is recommended that values are assigned
contiguously starting from 1.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.1
hwL2IfPortIfIndex
The value of this object identifies the index of the Layer 2 interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.2
hwL2IfPortType
The value of this object identifies the type of the Layer 2 interface.
Enumerationr/w
Enumerated Values:
0invalid
1trunk
2access
3hybrid
4fabric
5qinq
6desirable
7auto
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.3
hwL2IfPVID
Layer2 interface Port VLAN ID
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.4
hwL2IfIsSrcMacFilter
Whether to filter source MAC address. We do not support it now.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.5
hwL2IfMacAddrLearnMode
The object indicates the mode for learning MAC addresses.
Enumeration
Enumerated Values:
1iVL
2sVL
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.6
hwL2IfMacAddressLearn
Status indicates if the interface is allowed to learn mac
address, enable(1) can be set, (enabled(1) means that
the interface can learn mac address), otherwise disabled(2)
can be set. discard(3) means the interface w…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3discard
4invalid
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.7
hwL2IfBcastRatio
Broadcast-suppression ratio. Default is 100% . 100% indicates
that the broadcast isn't suppressed.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.8
hwL2IfMcastRatio
Multicast-suppression ratio.Default is 100%, 100% indicates that
the multicast isn't suppressed.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.9
hwL2IfUcastRatio
Unicastsuppression ratio. Default is 100% , 100% indicates that
the broadcast isn't suppressed.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.10
hwL2IfOutBcastRatio
Outbound broadcast-suppression ratio. Default is 100% . 100% indicates
that the broadcast isn't suppressed.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.11
hwL2IfOutMcastRatio
Outbound multicast-suppression ratio.Default is 100%, 100% indicates that
the multicast isn't suppressed.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.12
hwL2IfOutUcastRatio
Outbound unicastsuppression ratio. Default is 100% , 100% indicates that
the broadcast isn't suppressed.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.13
hwL2IfDiscardBcast
The flag of dropping the broadcast packets.
1:discard; 2:forward(default).
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.14
hwL2IfDiscardUnknownMcast
The flag of dropping the unknown multicast packets.
1:discard; 2:forward(default).
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.15
hwL2IfDiscardUnknownUcast
The flag of dropping the unknown unicast packets.
1:discard; 2:forward(default).
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.16
hwL2IfBpdu
Bpdu enable in port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.17
hwL2IfPortPriority
Port priority about interface.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.18
hwL2IfPortName
The interface name.
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.19
hwL2IfInInvalidVlanPkts
The number of invalid VLAN packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.20
hwL2IfFlushEnable
The flush enable status of layer2 port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.21
hwL2IfFlushControlVlan
The control vlan of flush packet.
Integer32r/w
Constraints:
range: 1-4094
range: 65535-65535
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.22
hwL2IfCurrentInBcastPercent
The flag of qinq port trust default priority,
1:enable; 2:disable(default).
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.23
hwL2IfCurrentOutBcastPercent
The flag of port offline status,
1:enable; 2:disable(default).
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.24
hwL2IfQinqVlanTransEnable
Enable QinQ VLAN translation,
1:enable; 2:disable(default).
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.25
hwL2IfQinqVlanTransMissDrop
Packets are dropped when a VLAN translation miss occurs,
1:noDrop(default); 2:drop.
Enumerationr/w
Enumerated Values:
1noDrop
2drop
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.26
hwL2IfIpSubnetVlanEnable
Enable VLAN assignment based on ip subnet,
1:enable(default); 2:disable.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.27
hwL2IfMacVlanEnable
Mac Vlan enable,
1:enable; 2:disable(default)
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.28
hwL2IfPolicyVlanEnable
Policy Vlan enable,
1:enable; 2:disable(default)
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.29
hwL2IfVlanPrecedence
Determine the priorities for selecting VLAN (MAC-based, subnet-based VLANs),
0:MAC VLAN(default); 1:IPSUBNET VLAN.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.30
hwL2IfIsolateGroupEnable
The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate group. The default value is disable(2).
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31
hwL2IfActivePortType
Layer2 interface active port type, it contains invalid(0), trunk(1),
access(2), hybrid(3), fabric(4), qinq(5).Do not support fabric(4) now.
Enumeration
Enumerated Values:
0invalid
1trunk
2access
3hybrid
4fabric
5qinq
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.32

hwL2IfHybridPortTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.9 · 1 row entry · 5 columns
Open in standard view 
This table describes the VLAN information about Layer 2 hybrid interfaces in tagged and untagged modes.
hwL2IfHybridPortEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1
Entry of Hybrid-port configuration table
Indexes
hwL2IfHybridPortIndex
Column Syntax OID
hwL2IfHybridPortIndex
Index of Hybrid-port
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.1
hwL2IfHybridTaggedVlanListLow
This object indicates the low-bit tagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 low-bit VLANs (0-2047) and VLAN 0 is not used.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.2
hwL2IfHybridTaggedVlanListHigh
This object indicates the high-bit tagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 high-bit VLANs (2048-4095) and VLAN 4095 is not used.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.3
hwL2IfHybridUnTaggedVlanListLow
This object indicates the low-bit untagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 low-bit VLANs (0-2047) and VLAN 0 is not used.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.4
hwL2IfHybridUnTaggedVlanListHigh
This object indicates the high-bit untagged VLANs carried in packets that can pass through the hybrid interface. There are 2048 high-bit VLANs (2048-4095) and VLAN 4095 is not used.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.5

hwL2IfTrunkPortTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.10 · 1 row entry · 3 columns
Open in standard view 
This table describes the allowed VLAN information about Layer 2 trunk interfaces.
hwL2IfTrunkPortEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1
Entry of Trunk-port configuration table
Indexes
hwL2IfTrunkPortIndex
Column Syntax OID
hwL2IfTrunkPortIndex
Index of Trunk-port
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.1
hwL2IfTrunkAllowPassVlanListLow
This object indicates low-bit VLANs carried in packets that can pass through the trunk interface. There are 2048 low-bit VLANs (0-2047) and VLAN 0 is not used.
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.2
hwL2IfTrunkAllowPassVlanListHigh
This object indicates high-bit VLANs carried in packets that can pass through the trunk interface. There are 2048 high-bit VLANs (2048-4095) and 4095 is not used.
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.3

hwL2IfPortIsolateTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.11 · 1 row entry · 3 columns
Open in standard view 
Port isolate in the same Service-instance table. The Service-instance
is used to communicate among different vlans.
hwL2IfPortIsolateEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1
Entry of port isolate configuration table.
Indexes
hwL2IfPortIsolatePortIndex hwL2IfPortIsolateSIName
Column Syntax OID
hwL2IfPortIsolatePortIndex
The port index of L2 interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.1
hwL2IfPortIsolateSIName
The name of Service-instance.The Service-instance(S.I.)is used to
communicate among different vlans.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.2
hwL2IfPortIsolateRowStatus
The RowStatus of hwL2IfPortIsolateTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.3

hwL2IfSuppressionTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.12 · 1 row entry · 5 columns
Open in standard view 
Port suppression configuration table
hwL2IfSuppressionEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1
Entry of port suppression configuration table
Indexes
hwL2IfSuppressionPortIndex hwL2IfSuppressionType
Column Syntax OID
hwL2IfSuppressionPortIndex
The port index of L2 interface.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.1
hwL2IfSuppressionType
Type of port suppression command, a unique value from 1 to 3:
1 means broadcast suppression;
2 means multicast suppression;
3 means unicast suppression.
Enumeration
Enumerated Values:
1broadcast
2multicast
3unicast
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.2
hwL2IfSuppressionCir
Committed Information Rate. Unit: kbps.
Integer32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.3
hwL2IfSuppressionCbs
Committed Burst Size. Unit: byte
Integer32r/w
Constraints:
range: 2048-64000000
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.4
hwL2IfSuppressionRowStatus
The RowStatus of hwL2IfSuppressionTable
.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.5

hwL2IfVlanSuppressionTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.13 · 1 row entry · 6 columns
Open in standard view 
Port and Vlan suppression configuration table
hwL2IfVlanSuppressionEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1
Entry of port and Vlan suppression configuration table
Indexes
hwL2IfVlanSuppressionPortIndex hwL2IfVlanSuppressionStartVlan hwL2IfVlanSuppressionEndVlan
Column Syntax OID
hwL2IfVlanSuppressionPortIndex
The port index of L2 interface.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.1
hwL2IfVlanSuppressionStartVlan
The start vlan-id of port and vlan suppression.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.2
hwL2IfVlanSuppressionEndVlan
The end vlan-id of port and vlan suppression.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.3
hwL2IfVlanSuppressionCir
Committed Information Rate. Unit: kbps.
Integer32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.4
hwL2IfVlanSuppressionCbs
Committed Burst Size. Unit: byte
Integer32r/w
Constraints:
range: 2048-64000000
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.5
hwL2IfVlanSuppressionRowStatus
The RowStatus of hwL2IfVlanSuppressionTable
.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.6

hwL2IfPortTcnTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.14 · 1 row entry · 5 columns
Open in standard view 
Port TCN in the same Service-instance table. The Service-instance
is used to configure TCN.
hwL2IfPortTcnEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1
Entry of port TCN configuration table.
Indexes
hwL2IfTcnPortIndex
Column Syntax OID
hwL2IfTcnPortIndex
The port index of L2 interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.1
hwL2IfTcnStp
Status indicates if the interface is allowed to notify stp TCN message
, enable(1) can be set, (enabled(1) means that
the interface can notify TCN), otherwise disabled(2)
can be set.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.2
hwL2IfTcnSmartLink
Status indicates if the interface is allowed to notify SmartLink TCN message,
enable(1) can be set, (enabled(1) means that
the interface can notify TCN), otherwise disabled(2)
can be set.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.3
hwL2IfTcnVlanListLow
The lowest possible value of the vlan list on the
Tcn-port.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.4
hwL2IfTcnVlanListHigh
The highest possible value of the vlan list on the
Tcn-port.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.5

hwL2IfPortLoopDetectTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.15 · 1 row entry · 6 columns
Open in standard view 
A table containing the port external loopback detection information for device.
It can protect the port from external loopback.
hwL2IfPortLoopDetectEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1
Entries of the port external loopback detection table.
Indexes
hwL2IfPortLoopDetectPort
Column Syntax OID
hwL2IfPortLoopDetectPort
The port number which will be configured port external loopback detection.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.1
hwL2IfPortLoopDetectEnabled
When this object is set to 'enabled(1)' Port external loopback detection
is enabled on this port else disabled.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.2
hwL2IfPortLoopDetectInterval
The detect period of port external loopback detection.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.3
hwL2IfPortLoopDetectAction
The port external loopback detection protect action of this entry.
Enumerationr/w
Enumerated Values:
1shutdown
2block
3trap
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.4
hwL2IfPortLoopDetectStatus
The current status of port(block/shutdown/trap/normal).
Enumeration
Enumerated Values:
1normal
2block
3shutdown
4trap
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.5
hwL2IfPortLoopDetectProtocol
The ethernet type of the detecting packet to port external loopback detection.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.6

hwL2IfPortProtocolVlanDataTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.16 · 1 row entry · 4 columns
Open in standard view 
The entry of protocol vlan by port.
hwL2IfPortProtocolVlanDataEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1
The entry of protocol vlan by port.
Indexes
hwL2IfPortProtocolVlanDataPortIndex
Column Syntax OID
hwL2IfPortProtocolVlanDataPortIndex
The protocol vlan Index of port .
Integer32
Constraints:
range: 1-479
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.1
hwL2IfPortProtocolVlanDataVlan
VLAN ID.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.2
hwL2IfPortProtocolVlanDataPri
VLAN PRI.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.3
hwL2IfPortProtocolVlanDataRowStatus
Operation status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.4

hwL2IfPwSuppressionTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.17 · 1 row entry · 6 columns
Open in standard view 
Pw suppression configuration table
hwL2IfPwSuppressionEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1
This object indicates the configuration table for PW-based unknown
traffic suppression.
Indexes
hwL2IfPwSuppressionVsiName hwL2IfPwSuppressionPwName hwL2IfPwSuppressionType
Column Syntax OID
hwL2IfPwSuppressionVsiName
This object indicates the name of the VSI that is configured with PW-based
unknown traffic suppression.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.1
hwL2IfPwSuppressionPwName
This object indicates the name of the PW that is configured with PW-based
unknown traffic suppression.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.2
hwL2IfPwSuppressionType
The value of this object identifies the type of PW-based unknown traffic suppression:
1: broadcast suppression
2: multicast suppression
3: unknown unicast suppression
Enumeration
Enumerated Values:
1broadcast
2multicast
3unicast
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.3
hwL2IfPwSuppressionCir
This object indicates the Committed Information Rate. Unit: kbit/s.
Integer32r/w
Constraints:
range: 100-1000000
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.4
hwL2IfPwSuppressionCbs
This object indicates the Committed Burst Size. Unit: byte.
Integer32r/w
Constraints:
range: 100-33554432
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.5
hwL2IfPwSuppressionRowStatus
This object indicates the RowStatus of hwPwSuppressionTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.50

hwL2IfDynamicPortVlanTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.19 · 1 row entry · 7 columns
Open in standard view 
Table for dynamic relationship of port-vlan.
hwL2IfDynamicPortVlanEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1
Entry of dynamic port-vlan relationship table.
Indexes
hwL2IfDynamicPortVlanPortIndex hwL2IfDynamicPortVlanServiceType
Column Syntax OID
hwL2IfDynamicPortVlanPortIndex
Port index of switch-port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.1
hwL2IfDynamicPortVlanServiceType
Service type of dynamic port-vlan relationship table.
Enumeration
Enumerated Values:
1configured
2gvrp
3voiceVLAN
4unAuthenUserVLAN
5dynAuthenVLAN
6hvrp
7elmi
8macFlapping
9loopbackDetect
10loopDetection
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.2
hwL2IfDynamicPortVlanPvid
The Dynamic PVID of port-vlan table.
Q-BRIDGE-MIBVlanIdOrNone
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.3
hwL2IfDynamicPortVlanUntaggedVlanListLow
The lowest possible value of the untagged vlan list of dynamic port-vlan table.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.4
hwL2IfDynamicPortVlanUntaggedVlanListHigh
The highest possible value of the untagged vlan list of Dynamic port-vlan table.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.5
hwL2IfDynamicPortVlanTaggedVlanListLow
The lowest possible value of the tagged vlan list of Dynamic port-vlan table.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.6
hwL2IfDynamicPortVlanTaggedVlanListHigh
The highest possible value of the tagged vlan list of Dynamic port-vlan table.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.7

hwL2IfDynPortVlanTable

table
.1.3.6.1.4.1.2011.5.25.42.1.1.1.20 · 1 row entry · 6 columns
Open in standard view 
Table for dynamic relationship of port-vlan.
hwL2IfDynPortVlanEntry entry .1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1
Entry of dynamic port-vlan relationship table.
Indexes
hwL2IfDynPortVlanPortIndex
Column Syntax OID
hwL2IfDynPortVlanPortIndex
Port index of switch-port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.1
hwL2IfDynPortVlanPvid
The Dynamic PVID of port-vlan table.
Q-BRIDGE-MIBVlanIdOrNone
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.2
hwL2IfDynPortVlanUntaggedVlanListLow
The lowest possible value of the untagged vlan list of dynamic port-vlan table.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.3
hwL2IfDynPortVlanUntaggedVlanListHigh
The highest possible value of the untagged vlan list of Dynamic port-vlan table.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.4
hwL2IfDynPortVlanTaggedVlanListLow
The lowest possible value of the tagged vlan list of Dynamic port-vlan table.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.5
hwL2IfDynPortVlanTaggedVlanListHigh
The highest possible value of the tagged vlan list of Dynamic port-vlan table.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.42.1.1.1.20.1.6