hwL2IfPortNum

HUAWEI-L2IF-MIB · .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.1
MIB view Table view

Object

column Integer32 
Number of layer2 interface port, a unique value,
for each port. It is recommended that values are assigned 
contiguously starting from 1.

Context

MIB
HUAWEI-L2IF-MIB
OID
.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.1
Type
column
Access
noaccess
Status
current
Parent
hwL2IfEntry
Table
hwL2IfTable
Siblings
31

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwL2IfUcastRatio
Unicastsuppression ratio. Default is 100% , 100% indicates that the broadcast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.10
hwL2IfOutBcastRatio
Outbound broadcast-suppression ratio. Default is 100% . 100% indicates that the broadcast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.11
hwL2IfOutMcastRatio
Outbound multicast-suppression ratio.Default is 100%, 100% indicates that the multicast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.12
hwL2IfOutUcastRatio
Outbound unicastsuppression ratio. Default is 100% , 100% indicates that the broadcast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.13
hwL2IfDiscardBcast
The flag of dropping the broadcast packets. 1:discard; 2:forward(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.14
hwL2IfDiscardUnknownMcast
The flag of dropping the unknown multicast packets. 1:discard; 2:forward(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.15
hwL2IfDiscardUnknownUcast
The flag of dropping the unknown unicast packets. 1:discard; 2:forward(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.16
hwL2IfBpdu
Bpdu enable in port.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.17
hwL2IfPortPriority
Port priority about interface.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.18
hwL2IfPortName
The interface name.
columnOctetString.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.19
hwL2IfPortIfIndex
The value of this object identifies the index of the Layer 2 interface.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.2
hwL2IfInInvalidVlanPkts
The number of invalid VLAN packets.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.20
hwL2IfFlushEnable
The flush enable status of layer2 port.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.21
hwL2IfFlushControlVlan
The control vlan of flush packet.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.22
hwL2IfCurrentInBcastPercent
The flag of qinq port trust default priority, 1:enable; 2:disable(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.23
hwL2IfCurrentOutBcastPercent
The flag of port offline status, 1:enable; 2:disable(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.24
hwL2IfQinqVlanTransEnable
Enable QinQ VLAN translation, 1:enable; 2:disable(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.25
hwL2IfQinqVlanTransMissDrop
Packets are dropped when a VLAN translation miss occurs, 1:noDrop(default); 2:drop.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.26
hwL2IfIpSubnetVlanEnable
Enable VLAN assignment based on ip subnet, 1:enable(default); 2:disable.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.27
hwL2IfMacVlanEnable
Mac Vlan enable, 1:enable; 2:disable(default)
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.28
hwL2IfPolicyVlanEnable
Policy Vlan enable, 1:enable; 2:disable(default)
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.29
hwL2IfPortType
The value of this object identifies the type of the Layer 2 interface.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.3
hwL2IfVlanPrecedence
Determine the priorities for selecting VLAN (MAC-based, subnet-based VLANs), 0:MAC VLAN(default); 1:IPSUBNET VLAN.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.30
hwL2IfIsolateGroupEnable
The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate group. The default value…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31
hwL2IfActivePortType
Layer2 interface active port type, it contains invalid(0), trunk(1), access(2), hybrid(3), fabric(4), qinq(5).Do not support fabric(4) now.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.32
hwL2IfPVID
Layer2 interface Port VLAN ID
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.4
hwL2IfIsSrcMacFilter
Whether to filter source MAC address. We do not support it now.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.5
hwL2IfMacAddrLearnMode
The object indicates the mode for learning MAC addresses.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.6
hwL2IfMacAddressLearn
Status indicates if the interface is allowed to learn mac address, enable(1) can be set, (enabled(1) means that the interface can learn mac address), otherwise disabled(2) can …
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.7
hwL2IfBcastRatio
Broadcast-suppression ratio. Default is 100% . 100% indicates that the broadcast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.8
hwL2IfMcastRatio
Multicast-suppression ratio.Default is 100%, 100% indicates that the multicast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.9