hwL2IfMacAddrLearnMode
HUAWEI-L2IF-MIB ·
.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.6
Object
column
Enumeration
The object indicates the mode for learning MAC addresses.
Context
- MIB
- HUAWEI-L2IF-MIB
- OID
.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwL2IfEntry
- Table
- hwL2IfTable
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | iVL |
2 | sVL |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwL2IfPortNum Number of layer2 interface port, a unique value,
for each port. It is recommended that values are assigned
contiguously starting from 1. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.1 |
| hwL2IfUcastRatio Unicastsuppression ratio. Default is 100% , 100% indicates that
the broadcast isn't suppressed. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.10 |
| hwL2IfOutBcastRatio Outbound broadcast-suppression ratio. Default is 100% . 100% indicates
that the broadcast isn't suppressed. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.11 |
| hwL2IfOutMcastRatio Outbound multicast-suppression ratio.Default is 100%, 100% indicates that
the multicast isn't suppressed. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.12 |
| hwL2IfOutUcastRatio Outbound unicastsuppression ratio. Default is 100% , 100% indicates that
the broadcast isn't suppressed. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.13 |
| hwL2IfDiscardBcast The flag of dropping the broadcast packets.
1:discard; 2:forward(default). | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.14 |
| hwL2IfDiscardUnknownMcast The flag of dropping the unknown multicast packets.
1:discard; 2:forward(default). | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.15 |
| hwL2IfDiscardUnknownUcast The flag of dropping the unknown unicast packets.
1:discard; 2:forward(default). | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.16 |
| hwL2IfBpdu Bpdu enable in port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.17 |
| hwL2IfPortPriority Port priority about interface. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.18 |
| hwL2IfPortName The interface name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.19 |
| hwL2IfPortIfIndex The value of this object identifies the index of the Layer 2 interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.2 |
| hwL2IfInInvalidVlanPkts The number of invalid VLAN packets. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.20 |
| hwL2IfFlushEnable The flush enable status of layer2 port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.21 |
| hwL2IfFlushControlVlan The control vlan of flush packet. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.22 |
| hwL2IfCurrentInBcastPercent The flag of qinq port trust default priority,
1:enable; 2:disable(default). | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.23 |
| hwL2IfCurrentOutBcastPercent The flag of port offline status,
1:enable; 2:disable(default). | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.24 |
| hwL2IfQinqVlanTransEnable Enable QinQ VLAN translation,
1:enable; 2:disable(default). | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.25 |
| hwL2IfQinqVlanTransMissDrop Packets are dropped when a VLAN translation miss occurs,
1:noDrop(default); 2:drop. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.26 |
| hwL2IfIpSubnetVlanEnable Enable VLAN assignment based on ip subnet,
1:enable(default); 2:disable. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.27 |
| hwL2IfMacVlanEnable Mac Vlan enable,
1:enable; 2:disable(default) | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.28 |
| hwL2IfPolicyVlanEnable Policy Vlan enable,
1:enable; 2:disable(default) | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.29 |
| hwL2IfPortType The value of this object identifies the type of the Layer 2 interface. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.3 |
| hwL2IfVlanPrecedence Determine the priorities for selecting VLAN (MAC-based, subnet-based VLANs),
0:MAC VLAN(default); 1:IPSUBNET VLAN. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.30 |
| hwL2IfIsolateGroupEnable The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate group. The default value… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31 |
| hwL2IfActivePortType Layer2 interface active port type, it contains invalid(0), trunk(1),
access(2), hybrid(3), fabric(4), qinq(5).Do not support fabric(4) now. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.32 |
| hwL2IfPVID Layer2 interface Port VLAN ID | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.4 |
| hwL2IfIsSrcMacFilter Whether to filter source MAC address. We do not support it now. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.5 |
| hwL2IfMacAddressLearn Status indicates if the interface is allowed to learn mac
address, enable(1) can be set, (enabled(1) means that
the interface can learn mac address), otherwise disabled(2)
can … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.7 |
| hwL2IfBcastRatio Broadcast-suppression ratio. Default is 100% . 100% indicates
that the broadcast isn't suppressed. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.8 |
| hwL2IfMcastRatio Multicast-suppression ratio.Default is 100%, 100% indicates that
the multicast isn't suppressed. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.9 |