hwL2IfMacAddressLearn

HUAWEI-L2IF-MIB · .1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.7
MIB view Table view

Object

column r/w Enumeration 
Status indicates if the interface is allowed to learn mac 
address, enable(1) can be set, (enabled(1) means that 
the interface can learn mac address), otherwise disabled(2) 
can be set. discard(3) means the interface will drop packets.

Context

MIB
HUAWEI-L2IF-MIB
OID
.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.7
Type
column
Access
readwrite
Status
current
Parent
hwL2IfEntry
Table
hwL2IfTable
Siblings
31

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enabled
2disabled
3discard
4invalid

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwL2IfPortNum
Number of layer2 interface port, a unique value, for each port. It is recommended that values are assigned contiguously starting from 1.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.1
hwL2IfUcastRatio
Unicastsuppression ratio. Default is 100% , 100% indicates that the broadcast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.10
hwL2IfOutBcastRatio
Outbound broadcast-suppression ratio. Default is 100% . 100% indicates that the broadcast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.11
hwL2IfOutMcastRatio
Outbound multicast-suppression ratio.Default is 100%, 100% indicates that the multicast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.12
hwL2IfOutUcastRatio
Outbound unicastsuppression ratio. Default is 100% , 100% indicates that the broadcast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.13
hwL2IfDiscardBcast
The flag of dropping the broadcast packets. 1:discard; 2:forward(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.14
hwL2IfDiscardUnknownMcast
The flag of dropping the unknown multicast packets. 1:discard; 2:forward(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.15
hwL2IfDiscardUnknownUcast
The flag of dropping the unknown unicast packets. 1:discard; 2:forward(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.16
hwL2IfBpdu
Bpdu enable in port.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.17
hwL2IfPortPriority
Port priority about interface.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.18
hwL2IfPortName
The interface name.
columnOctetString.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.19
hwL2IfPortIfIndex
The value of this object identifies the index of the Layer 2 interface.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.2
hwL2IfInInvalidVlanPkts
The number of invalid VLAN packets.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.20
hwL2IfFlushEnable
The flush enable status of layer2 port.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.21
hwL2IfFlushControlVlan
The control vlan of flush packet.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.22
hwL2IfCurrentInBcastPercent
The flag of qinq port trust default priority, 1:enable; 2:disable(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.23
hwL2IfCurrentOutBcastPercent
The flag of port offline status, 1:enable; 2:disable(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.24
hwL2IfQinqVlanTransEnable
Enable QinQ VLAN translation, 1:enable; 2:disable(default).
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.25
hwL2IfQinqVlanTransMissDrop
Packets are dropped when a VLAN translation miss occurs, 1:noDrop(default); 2:drop.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.26
hwL2IfIpSubnetVlanEnable
Enable VLAN assignment based on ip subnet, 1:enable(default); 2:disable.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.27
hwL2IfMacVlanEnable
Mac Vlan enable, 1:enable; 2:disable(default)
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.28
hwL2IfPolicyVlanEnable
Policy Vlan enable, 1:enable; 2:disable(default)
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.29
hwL2IfPortType
The value of this object identifies the type of the Layer 2 interface.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.3
hwL2IfVlanPrecedence
Determine the priorities for selecting VLAN (MAC-based, subnet-based VLANs), 0:MAC VLAN(default); 1:IPSUBNET VLAN.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.30
hwL2IfIsolateGroupEnable
The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate group. The default value…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31
hwL2IfActivePortType
Layer2 interface active port type, it contains invalid(0), trunk(1), access(2), hybrid(3), fabric(4), qinq(5).Do not support fabric(4) now.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.32
hwL2IfPVID
Layer2 interface Port VLAN ID
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.4
hwL2IfIsSrcMacFilter
Whether to filter source MAC address. We do not support it now.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.5
hwL2IfMacAddrLearnMode
The object indicates the mode for learning MAC addresses.
columnEnumeration.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.6
hwL2IfBcastRatio
Broadcast-suppression ratio. Default is 100% . 100% indicates that the broadcast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.8
hwL2IfMcastRatio
Multicast-suppression ratio.Default is 100%, 100% indicates that the multicast isn't suppressed.
columnInteger32.1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.9