HUAWEI-IPDSLAM-PPPOE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
38

hwPPPoESmltAdminTable

table
.1.3.6.1.4.1.2011.6.107.2 · 1 row entry · 15 columns
Open in standard view 
Used for starting or stopping the PPPoE dialup simulation service, and for 
querying the result of the simulated PPPoE dialup.
The index of this table is hwPPPoESmltObjIndex.
hwPPPoESmltAdminEntry entry .1.3.6.1.4.1.2011.6.107.2.1
Used for starting or stopping the PPPoE dialup simulation service, and for
querying the result of the simulated PPPoE dialup.
The index of this entry is hwPPPoESmltObjIndex.
Indexes
hwPPPoESmltObjIndex
Column Syntax OID
hwPPPoESmltObjIndex
Indicates the index of hwPPPoESmltAdminTable.
This leaf means the dialup ID. Currently, only
one user is supported. The maximum value of the
index is 1.
If you specify it to 4294967295, the system will
automatically…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.107.2.1.1
hwPPPoESmltSrvFlowIndex
Indicates the service port ID. Here, it refers to the ID of a service port
that is already created on the current device. The service port ID on the
NMS is larger than the service port ID on the host by 1.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.6.107.2.1.2
hwPPPoESmltUserName
Indicates the user name.
OctetStringr/w
Constraints:
range: 1-65
 .1.3.6.1.4.1.2011.6.107.2.1.3
hwPPPoESmltUserPassword
Indicates the user password for authentication.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.107.2.1.4
hwPPPoESmltAuthMode
Indicates the user authentication mode. Currently, the device supports two modes,
Options:
1. chap(1) -Challenge-Handshake Authentication Protocol mode
2. pap(2) -Password Authentication Protocol mode
Enumerationr/w
Enumerated Values:
1chap
2pap
 .1.3.6.1.4.1.2011.6.107.2.1.5
hwPPPoESmltOverTime
Indicates the test timeout time. It is an optional parameter.
Unit: second
Range: 5-60
Default: 5
Integer32r/w
Constraints:
range: 5-60
 .1.3.6.1.4.1.2011.6.107.2.1.6
hwPPPoESmltCurrentPhase
Indicates the current stage of the simulation.
Options:
1. discovery(1) -indicates the discovery stage of PPPoE dialup
2. lcp(2) -indicates the LCP negotiation stage. In this stage,
…
Enumeration
Enumerated Values:
1discovery
2lcp
3authentication
4ncp
5online
6stop
 .1.3.6.1.4.1.2011.6.107.2.1.7
hwPPPoESmltResult
Indicates the simulation result.
Options:
1. success(0) -indicates the PPPoE simulation is success
2. otherError(1) -indicates other errors
3. timeout(2) -indicates the PPPoE simulation tim…
Enumeration
Enumerated Values:
0success
1otherError
2timeout
3paramNegoFail
4authenticationFail
5peerDownRequest
6waitPADOTimeout
7waitPADSTimeout
8waitPPPTimeout
9linkAbnormal
 .1.3.6.1.4.1.2011.6.107.2.1.8
hwPPPoESmltStartTime
Indicates the simulation start time.
Data type: DateAndTime.
For example, 2010-2-6,1:38:50.0,+8:0.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.107.2.1.9
hwPPPoESmltEndTime
Indicates the simulation end time.
Data type: DateAndTime.
For example, 2010-2-6,1:38:50.0,+8:0.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2011.6.107.2.1.10
hwPPPoESmltUserSessionId
Indicates the obtained session ID of the user.
Range: 1-4294967295
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.107.2.1.11
hwPPPoESmltUserIp
Indicates the obtained IP address of the user.
Data type: IpAddress.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.107.2.1.12
hwPPPoESmltGatewayIp
Indicates the obtained gateway IP address.
Data type: IpAddress.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.107.2.1.13
hwPPPoESmltRowStatus
Indicates the row status. It is used for starting or stopping the
PPPoE dialup simulation service. Only options active(1), createAndGo(4),
and destroy(6) are supported.
To start the PPPoE dialup simulation service, yo…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.107.2.1.14
hwPPPoESmltUserMac
Indicates the user-side MAC address. It is an optional parameter. By default, it is bridge MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.6.107.2.1.15

hwPPPoEClientConfigTable

table
.1.3.6.1.4.1.2011.6.107.3 · 1 row entry · 9 columns
Open in standard view 
Used for setting and querying the configuration information about a PPPoE client. 
The index of this table is hwPPPoEClientConfigName.
hwPPPoEClientConfigEntry entry .1.3.6.1.4.1.2011.6.107.3.1
Used for setting and querying the configuration information about a PPPoE client.
The index of this entry is hwPPPoEClientConfigName.
Indexes
hwPPPoEClientConfigName
Column Syntax OID
hwPPPoEClientConfigName
Indicates the identification of a PPPoE client.Range: 1-32 characters.
The PPPoE client identification must be presented in the ASCII codes of
the corresponding characters. For example, if the PPPoE client identificati…
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.107.3.1.1
hwPPPoEClientConfigUserName
Used for setting or querying the user name of PPPoE dialup.
Range: 1-65 characters.
OctetStringr/w
Constraints:
range: 1-65
 .1.3.6.1.4.1.2011.6.107.3.1.2
hwPPPoEClientConfigUserPassword
Used for setting or querying the user password of PPPoE dialup.
Range: 0-16 characters.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.107.3.1.3
hwPPPoEClientConfigAuthMode
Used for setting or querying the authentication mode of a PPPoE client.
Options:
1. chap(1) -Challenge-Handshake Authentication Protocol mode
2. pap(2) -Password Authentication Protocol mode
Default: chap(1)
Enumerationr/w
Enumerated Values:
1chap
2pap
 .1.3.6.1.4.1.2011.6.107.3.1.4
hwPPPoEClientConfigVlanID
Used for setting or querying the VLAN for the dialup of a PPPoE client.
Range: 1-4093
Default: 1
Integer32r/w
Constraints:
range: 1-4093
 .1.3.6.1.4.1.2011.6.107.3.1.5
hwPPPoEClientConfigEnableFlag
Used for setting (enabling/disabling) or querying the status of the PPPoE dialup function.
Options:
1. enable(1) -indicates the PPPoE dialup function is enabled
2. disable(2) -indicates the PPPoE dialup function is dis…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.107.3.1.6
hwPPPoEClientConfigIntervalTime
Used for setting or querying the interval for sending the Echo-Request packet.
Range: 1-65535
Unit: second
Default: 20s
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.107.3.1.7
hwPPPoEClientConfigRetransmitTimes
Indicates the count of retransmitting the Echo-Request packet at timeout.
Range: 1-10
Default: 3
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.6.107.3.1.8
hwPPPoEClientConfigRowStatus
Indicates the row status. It is used for setting, modifying, or deleting the
identification of a PPPoE client. Options active(1), createAndGo(4), and destroy(6) are supported.
To set the identification of a PPPoE clien…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.107.3.1.9

hwPPPoEClientSessionTable

table
.1.3.6.1.4.1.2011.6.107.4 · 1 row entry · 9 columns
Open in standard view 
Used for setting and querying the information about the session of a PPPoE client. 
The index of this table is hwPPPoEClientConfigName. 
To serve as an index, the value of hwPPPoEClientConfigName must be already configured 
in hwPPPoEClientConfigTable.
hwPPPoEClientSessionEntry entry .1.3.6.1.4.1.2011.6.107.4.1
Used for setting and querying the information about the session of a PPPoE client.
The index of this entry is hwPPPoEClientConfigName.
To serve as an index, the value of hwPPPoEClientConfigName must be already configu…
Indexes
hwPPPoEClientConfigName
Column Syntax OID
hwPPPoEClientSessionCurrentPhase
Used for querying the current stage of a PPPoE session.
Options:
1. discovery(1) -indicates the discovery stage of PPPoE dialup
2. lcp(2) -indicates the LCP negotiation stage. In this stage,
…
Enumeration
Enumerated Values:
1discovery
2lcp
3authentication
4ncp
5online
6disable
255initialstate
 .1.3.6.1.4.1.2011.6.107.4.1.1
hwPPPoEClientSessionId
Used for querying the session ID obtained by a PPPoE client. When PPPoE dialup
is not performed or the dialup fails, the session ID is an invalid value 4294967295.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.107.4.1.2
hwPPPoEClientSessionUserIp
Used for querying the IP address of a PPPoE client.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.107.4.1.3
hwPPPoEClientSessionUserMac
Used for querying the MAC address of a PPPoE client.
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.2011.6.107.4.1.4
hwPPPoEClientSessionGatewayIp
Used for querying the IP address of the gateway to which a PPPoE client is connected.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.107.4.1.5
hwPPPoEClientSessionGatewayMac
Used for querying the MAC address of the gateway to which a PPPoE client is connected.
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.2011.6.107.4.1.6
hwPPPoEClientSessionStartTime
Used for querying the dialup start time of a PPPoE client, in the unit of second.
The time value indicates the seconds lapsed from the Greenwich time 1970-01-01 00:00:00
to the dialup starting.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.107.4.1.7
hwPPPoEClientSessionEndTime
Used for querying the dialup end time of a PPPoE client, in the unit of second.
The time value indicates the seconds lapsed from the Greenwich time 1970-01-01 00:00:00
to the dialup ending.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.107.4.1.8
hwPPPoEClientSessionDiagnostic
Used for querying the information about a PPPoE dialup result.
Options:
1. success(1) -indicates successful PPPoE dialup
2. otherError(2) -indicates other errors
3. timeout(3) -indicates di…
Enumeration
Enumerated Values:
1success
2otherError
3timeout
4waitPADOTimeout
5waitPADSTimeout
6waitPPPTimeout
7paramNegoFail
8authenticationFail
9peerDownRequest
10linkAbnormal
256initialstate
 .1.3.6.1.4.1.2011.6.107.4.1.9

hwPPPoESmacCurrentUserTable

table
.1.3.6.1.4.1.2011.6.107.7 · 1 row entry · 5 columns
Open in standard view 
Used for querying the information about a PPPoE single-MAC user. 
The indexes of this table are ifIndex and hwPPPoESmacUserIndex.
hwPPPoESmacCurrentUserEntry entry .1.3.6.1.4.1.2011.6.107.7.1
Used for querying the information about a PPPoE single-MAC user.
The indexes of this entry are ifIndex and hwPPPoESmacUserIndex.
Indexes
IF-MIBifIndex hwPPPoESmacUserIndex
Column Syntax OID
hwPPPoESmacUserIndex
PPPoE SMAC user index.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.2011.6.107.7.1.1
hwPPPoESmacUserFlowId
PPPoE user flow ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.107.7.1.2
hwPPPoESmacUserSessionId
PPPoE session ID.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.107.7.1.3
hwPPPoESmacSessionUserMac
PPPoE SMAC user MAC address.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.2011.6.107.7.1.4
hwPPPoESmacVlanID
PPPoE SMAC user VLAN.
Integer32
Constraints:
range: 1-4093
 .1.3.6.1.4.1.2011.6.107.7.1.5