hwPPPoESmltResult

HUAWEI-IPDSLAM-PPPOE-MIB · .1.3.6.1.4.1.2011.6.107.2.1.8
MIB view Table view

Object

column Enumeration 
Indicates the simulation result.
Options:
1. success(0)            -indicates the PPPoE simulation is success
2. otherError(1)         -indicates other errors
3. timeout(2)            -indicates the PPPoE simulation timeout
4. paramNegoFail(3)      -indicates parameter negotiation failure
5. authenticationFail(4) -indicates the simulation authentication is failed
6. peerDownRequest(5)    -indicates that the dialup request is denied by the peer end
7. waitPADOTimeout(6)    -indicates that sending PADI and waiting for PADO time out
8. waitPADSTimeout(7)    -indicates that sending PADR and waiting for PADS time out
9. waitPPPTimeout(8)     -indicates waiting for PPP times out, such as an LCP timeout 
                          or an NCP timeout.
10. linkAbnormal(9)      -indicates the link of the PPPoE simulation is abnormal

Context

MIB
HUAWEI-IPDSLAM-PPPOE-MIB
OID
.1.3.6.1.4.1.2011.6.107.2.1.8
Type
column
Access
readonly
Status
current
Parent
hwPPPoESmltAdminEntry
Table
hwPPPoESmltAdminTable
Siblings
14

Syntax

Enumeration

Values & Constraints

Enumerated Values
0success
1otherError
2timeout
3paramNegoFail
4authenticationFail
5peerDownRequest
6waitPADOTimeout
7waitPADSTimeout
8waitPPPTimeout
9linkAbnormal

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwPPPoESmltObjIndex
Indicates the index of hwPPPoESmltAdminTable. This leaf means the dialup ID. Currently, only one user is supported. The maximum value of the index is 1. If you specify it to 42…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.6.107.2.1.1
hwPPPoESmltEndTime
Indicates the simulation end time. Data type: DateAndTime. For example, 2010-2-6,1:38:50.0,+8:0.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.6.107.2.1.10
hwPPPoESmltUserSessionId
Indicates the obtained session ID of the user. Range: 1-4294967295
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.6.107.2.1.11
hwPPPoESmltUserIp
Indicates the obtained IP address of the user. Data type: IpAddress.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.107.2.1.12
hwPPPoESmltGatewayIp
Indicates the obtained gateway IP address. Data type: IpAddress.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.6.107.2.1.13
hwPPPoESmltRowStatus
Indicates the row status. It is used for starting or stopping the PPPoE dialup simulation service. Only options active(1), createAndGo(4), and destroy(6) are supported. To start…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.6.107.2.1.14
hwPPPoESmltUserMac
Indicates the user-side MAC address. It is an optional parameter. By default, it is bridge MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.6.107.2.1.15
hwPPPoESmltSrvFlowIndex
Indicates the service port ID. Here, it refers to the ID of a service port that is already created on the current device. The service port ID on the NMS is larger than the servi…
columnInteger32.1.3.6.1.4.1.2011.6.107.2.1.2
hwPPPoESmltUserName
Indicates the user name.
columnOctetString.1.3.6.1.4.1.2011.6.107.2.1.3
hwPPPoESmltUserPassword
Indicates the user password for authentication.
columnOctetString.1.3.6.1.4.1.2011.6.107.2.1.4
hwPPPoESmltAuthMode
Indicates the user authentication mode. Currently, the device supports two modes, Options: 1. chap(1) -Challenge-Handshake Authentication Protocol mode 2. pap(2) -Password Authe…
columnEnumeration.1.3.6.1.4.1.2011.6.107.2.1.5
hwPPPoESmltOverTime
Indicates the test timeout time. It is an optional parameter. Unit: second Range: 5-60 Default: 5
columnInteger32.1.3.6.1.4.1.2011.6.107.2.1.6
hwPPPoESmltCurrentPhase
Indicates the current stage of the simulation. Options: 1. discovery(1) -indicates the discovery stage of PPPoE dialup 2. lcp(2) -indicates the LCP negotiation sta…
columnEnumeration.1.3.6.1.4.1.2011.6.107.2.1.7
hwPPPoESmltStartTime
Indicates the simulation start time. Data type: DateAndTime. For example, 2010-2-6,1:38:50.0,+8:0.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.6.107.2.1.9