hwPPPoESmltAdminEntry

HUAWEI-IPDSLAM-PPPOE-MIB · .1.3.6.1.4.1.2011.6.107.2.1

MIB view Table view

Object

row

Used for starting or stopping the PPPoE dialup simulation service, and for 
querying the result of the simulated PPPoE dialup.
The index of this entry is hwPPPoESmltObjIndex.

Context

MIB: HUAWEI-IPDSLAM-PPPOE-MIB
OID: .1.3.6.1.4.1.2011.6.107.2.1
Type: row
Status: current
Parent: hwPPPoESmltAdminTable
Table: hwPPPoESmltAdminTable
Children: 15

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
hwPPPoESmltObjIndex Indicates the index of hwPPPoESmltAdminTable. This leaf means the dialup ID. Currently, only one user is supported. The maximum value of the index is 1. If you specify it to 42…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.107.2.1.1`
hwPPPoESmltEndTime Indicates the simulation end time. Data type: DateAndTime. For example, 2010-2-6,1:38:50.0,+8:0.	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.2011.6.107.2.1.10`
hwPPPoESmltUserSessionId Indicates the obtained session ID of the user. Range: 1-4294967295	column	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.2011.6.107.2.1.11`
hwPPPoESmltUserIp Indicates the obtained IP address of the user. Data type: IpAddress.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.6.107.2.1.12`
hwPPPoESmltGatewayIp Indicates the obtained gateway IP address. Data type: IpAddress.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.6.107.2.1.13`
hwPPPoESmltRowStatus Indicates the row status. It is used for starting or stopping the PPPoE dialup simulation service. Only options active(1), createAndGo(4), and destroy(6) are supported. To start…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.6.107.2.1.14`
hwPPPoESmltUserMac Indicates the user-side MAC address. It is an optional parameter. By default, it is bridge MAC address.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.2011.6.107.2.1.15`
hwPPPoESmltSrvFlowIndex Indicates the service port ID. Here, it refers to the ID of a service port that is already created on the current device. The service port ID on the NMS is larger than the servi…	column	Integer32	`.1.3.6.1.4.1.2011.6.107.2.1.2`
hwPPPoESmltUserName Indicates the user name.	column	OctetString	`.1.3.6.1.4.1.2011.6.107.2.1.3`
hwPPPoESmltUserPassword Indicates the user password for authentication.	column	OctetString	`.1.3.6.1.4.1.2011.6.107.2.1.4`
hwPPPoESmltAuthMode Indicates the user authentication mode. Currently, the device supports two modes, Options: 1. chap(1) -Challenge-Handshake Authentication Protocol mode 2. pap(2) -Password Authe…	column	Enumeration	`.1.3.6.1.4.1.2011.6.107.2.1.5`
hwPPPoESmltOverTime Indicates the test timeout time. It is an optional parameter. Unit: second Range: 5-60 Default: 5	column	Integer32	`.1.3.6.1.4.1.2011.6.107.2.1.6`
hwPPPoESmltCurrentPhase Indicates the current stage of the simulation. Options: 1. discovery(1) -indicates the discovery stage of PPPoE dialup 2. lcp(2) -indicates the LCP negotiation sta…	column	Enumeration	`.1.3.6.1.4.1.2011.6.107.2.1.7`
hwPPPoESmltResult Indicates the simulation result. Options: 1. success(0) -indicates the PPPoE simulation is success 2. otherError(1) -indicates other errors 3. timeout(2) …	column	Enumeration	`.1.3.6.1.4.1.2011.6.107.2.1.8`
hwPPPoESmltStartTime Indicates the simulation start time. Data type: DateAndTime. For example, 2010-2-6,1:38:50.0,+8:0.	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.2011.6.107.2.1.9`

Indexes

Object	Type	Syntax	OID
hwPPPoESmltObjIndex Indicates the index of hwPPPoESmltAdminTable. This leaf means the dialup ID. Currently, only one user is supported. The maximum value of the index is 1. If you specify it to 42…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.6.107.2.1.1`