HP-ICF-POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hpicfPoePethPsePortTable

table

.1.3.6.1.4.1.11.2.14.11.1.9.1.1 · 1 row entry · 17 columns

Open in standard view

This table supplements the table 'pethPsePortTable'
in ieee802af.mib.

hpicfPoePethPsePortEntry entry .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1

The fields in these entries will be used to supplement
fields in 'pethPsePortEntry in ieee802af.mib.

Indexes

No indexes recorded

Column Syntax OID

hpicfPoePethPsePortCurrent

This field specifies the current supplied at this port.
This value is specified in milli amperes(mA).

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.1

hpicfPoePethPsePortVoltage

This field specifies the Voltage supplied at this port.
This value is specified in 10's of volts (dV)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.2

hpicfPoePethPsePortPower

This field specifies the Power supplied at this port.
This value is specified in milliwatts (mW).

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.3

hpicfPoePethPsePortPowerAllocateBy

This field specifies the power allocation method for this port.
The default value is usage.

Enumerationr/w

Enumerated Values:

1	usage
2	class
3	value

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.4

hpicfPoePethPsePortPowerValue

This field specifies the power allocation defined for this port.
This value is specified in Watts (W).

Integer32r/w

Constraints:
range: 0-17

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.5

hpicfPoePethPsePortLLDPDetect

This field specifies if power should be allocated using
LLDP advertised information regarding the PD.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.6

hpicfPoePethPsePortPoePlusPowerValue

This field specifies the power allocation defined
for this port. Use this object for equipment
supporting high power, that is greater than 15
Watts. This value is specified in Watts (W). This
object may only be read …

WattsInteger32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.7

hpicfPoePethPsePortActualPower

This field specifies the actual power drained by the device
connected to this port.

milli-wattsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.8

hpicfPoePethPsePortOperStatus

This field specifies the operational status of the port

Enumeration

Enumerated Values:

1	deny
2	off
3	on

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.9

hpicfPoePethPsePortPowerMode

This field specifies the power mode of the port whether
enabled or disabled or disableWithFiber

Enumeration

Enumerated Values:

1	enable
2	disable
6	disableWithFiber

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.10

hpicfPoePethPsePortAveragePower

This field specifies the average power supplied to this port
which is used by the device connected to it.

wattsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.11

hpicfPoePethPsePortPeakPower

This field specifies the peak power supplied to this port
which is used by the device connected to it.

wattsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.12

hpicfPoePethPsePortPreStdDetect

This field specifies the pre standard detect status
for this port.
A value of On - indicates that power
pre-802.3af-standard devices.
A value of Off - indicates that only
pre-802.3af/at compliant devices are allowed.…

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.13

hpicfPoePethPsePortLowPriority

This object indicates whether a particular port
shuts down in the event of any PSU failure in the
system. A value of (1) indicates a low priority port
which shuts down in the event of any PSU failure.
A value of (2) ind…

Enumeration

Enumerated Values:

1	low
2	high

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.14

hpicfPoePethPsePortResetState

This object is used to reset the
PoE controller HW to which the
port is associated.

Enumerationr/w

Enumerated Values:

0	noreset
1	reset

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.15

hpicfPoePethPsePortPowerType

This field specifies the PD type determined
during physical layer classification. The default value is -1.

Enumeration

Enumerated Values:

-1	type0
1	type1
2	type2
3	type3
4	type4

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16

hpicfPoePethPsePortForceTwoPairMode

This field specifies the force two pair mode status
for this port.This applies only on devices that support
4 pair POE.
A value of On - indicates that force two pair
mode has been enabled for this port.
A value of Off -…

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.17

hpicfPseFeaturesTable

table

.1.3.6.1.4.1.11.2.14.11.1.9.1.6 · 1 row entry · 8 columns

Open in standard view

This table describes the features of each power source
equipment (PSE). On standalone switches (both stackable
and chassis switches) there shall be only one entry in
this table. In a stack, there shall be one entry for
each stack member.

hpicfPseFeaturesEntry entry .1.3.6.1.4.1.11.2.14.11.1.9.1.6.1

A row in the PSE features table, signifying a single
power source equipment.

Indexes

ENTITY-MIBentPhysicalIndex

Column Syntax OID

hpicfPseAllowPreStdDetect deprecated

This object is used to configure the default POE power
detection mode for this power source equipment.
A value of TRUE - indicates that power
pre-802.3af-standard devices. A value of FALSE -
indicates that only pre-802…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.1

hpicfPsePowerRedundancy

This object is used to configure the POE power redundancy
mode for this power source equipment.
A value of none(1) - means that all available power can be
allocated to powered devices.
A value of nPlus1(2) - means that …

Enumerationr/w

Enumerated Values:

1	none
2	nPlus1
3	full

.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2

hpicfPseExtPwrSupplyCount

This object is used to configure the number of external
power supplies expected to be connected to the Power Source
Equipment. The default value is 1.

Integer32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.3

hpicfPseAvailablePower

This field specifies the total power available on this
Power source equipment. This includes internal and external
power supplies.

WattsInteger32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.4

hpicfPseUsedPower

This field specifies the total power allocated on the
Power Source Equipment. This is the sum of the power
allocated to all the ports on the PSE.

WattsInteger32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.5

hpicfPseFailoverPower

This field specifies the failover power for this
Power Source Equipment.

WattsInteger32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.6

hpicfPseRedundantPower

This field specifies the redundancy POE power available
to the Power Source Equipment.

WattsInteger32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.7

hpicfPseCurrentPowerDraw

This field specifies the redundancy POE power available
to the Power Source Equipment.

WattsInteger32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.8

hpicfPoePowerSupplyTable

table

.1.3.6.1.4.1.11.2.14.11.1.9.1.7 · 1 row entry · 4 columns

Open in standard view

This table contains one row per power supply available 
to the switch.

hpicfPoePowerSupplyEntry entry .1.3.6.1.4.1.11.2.14.11.1.9.1.7.1

Information about a particular power supply. Each entry
provides information about power supply whether it is
external or internal, if it is poe/poePlus and the
capacity of the power supply.

Indexes

ENTITY-MIBentPhysicalIndex

Column Syntax OID

hpicfPoePowerSupplySourceType

This field specifies whether the power supply is external
or internal. Stackable switch has inbuilt power supply and
can have upto 1 external power supply. Chassis switch can
have upto 2 internal power supplies for 6 s…

Enumeration

Enumerated Values:

1	internal
2	external

.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.1

hpicfPoePowerSupplyType

This field specifies the type of the power supply,
poe or poePlus.

Enumeration

Enumerated Values:

1	poe
2	poePlus
3	notPresent
4	fault
5	auxFault

.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.2

hpicfPoePowerSupplyCapacity

This field specifies the capacity of the power supply.

WattsInteger32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.3

hpicfPoePowerSupplyAuxCapacity

This MIB object specifies the capacity of the
auxiliary power supply. The power supplies other
than the model J9830A returns the value NULL.

WattsInteger32

Constraints:
range: 0-10000

.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.4

hpicfPoePethPseOperStateTable

table

.1.3.6.1.4.1.11.2.14.11.1.9.1.8 · 1 row entry · 3 columns

Open in standard view

This table supplements the table 'pethPsePortTable'
in ieee802af.mib.

hpicfPoePethPseOperStateEntry entry .1.3.6.1.4.1.11.2.14.11.1.9.1.8.1

The fields in these entries will be used to supplement
fields in 'pethPsePortEntry in ieee802af.mib.

Indexes

No indexes recorded

Column Syntax OID

hpicfPoePethPseOperState

This field specifies the operation status.
The default value is on.

Enumeration

Enumerated Values:

1	poeOn
2	poePlusOn
3	off
4	fault

.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.1

hpicfPoePethPsePortNum

This field specifies the port number.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.2

hpicfPoePethMainPsePdPowerDraw

This field specifies the total actual power that is
used by all the ports on this slot or member.

WattsInteger32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.3

hpicfPoePethPsePowerTable

table

.1.3.6.1.4.1.11.2.14.11.1.9.1.11 · 1 row entry · 3 columns

Open in standard view

This table supplements the table 'pethPsePortTable'
in ieee802af.mib.

hpicfPoePethPsePowerEntry entry .1.3.6.1.4.1.11.2.14.11.1.9.1.11.1

The fields in these entries will be used to supplement
fields in pethPsePortEntry in ieee802af.mib.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfPoePethPsePeakPower This field specifies the peak power of the PSE.	WattsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.1`
hpicfPoePethPseAvgPower This field specifies the average power of the PSE.	WattsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.2`
hpicfPoePethPseRemGrntPower Guaranteed remaining power of PSEs	WattsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.3`

hpicfPoePethPseFourPairPortTable

table

.1.3.6.1.4.1.11.2.14.11.1.9.1.12 · 1 row entry · 9 columns

Open in standard view

This table supplements the table 'pethPsePortTable'
in ieee802af.mib.

hpicfPoePethPseFourPairPortEntry entry .1.3.6.1.4.1.11.2.14.11.1.9.1.12.1

The fields in these entries will be used to supplement
fields in 'pethPsePortEntry in ieee802af.mib.

Indexes

No indexes recorded

Column Syntax OID

hpicfpethPsePortPDSignature

This Signature value represents the PD signature.
This variable is valid only while a PD is detected.
The meaning of the signature labels is defined in the
IEEE specification.

Enumeration

Enumerated Values:

0	unknownSignature
1	singleSignature
2	dualSignature

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.1

hpicfpethPsePortDetectionStatusA

Describes the operational status of the port PD detection.
A value of deliveringPowerAltA - indicates that the PSE State
diagram is in the state POWER_ON_PRI if alt_pri='a', or the
state POWER_ON_SEC if alt_pri='b'.
A v…

Enumeration

Enumerated Values:

0	unknown
1	searchingAltA
2	deliveringPowerAltA
3	faultAltA

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.2

hpicfpethPsePortDetectionStatusB

Describes the operational status of the port PD detection.
A value of deliveringPowerAltB - indicates that the PSE State
diagram is in the state POWER_ON_SEC if alt_pri='a', or the
state POWER_ON_PRI if alt_pri='b'.
A v…

Enumeration

Enumerated Values:

0	unknown
1	searchingAltB
2	deliveringPowerAltB
3	faultAltB

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.3

hpicfpethPsePortPowerClassificationA

Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their …

Enumeration

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4
6	class5

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.4

hpicfpethPsePortPowerClassificationB

Enumeration

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4
6	class5

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.5

hpicfpethPsePortAssignedClass

Enumeration

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4
6	class5
7	class6
8	class7
9	class8

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.6

hpicfpethPsePortPLCClass

Enumeration

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4
6	class5
7	class6
8	class7
9	class8

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.7

hpicfpethPsePortPLCClassA

Enumeration

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4
6	class5

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.8

hpicfpethPsePortPLCClassB

Enumeration

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4
6	class5

.1.3.6.1.4.1.11.2.14.11.1.9.1.12.1.9