hpicfPoePethPsePortForceTwoPairMode

HP-ICF-POE-MIB · .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.17
MIB view Table view

Object

column r/w Enumeration 
This field specifies the force two pair mode status
for this port.This applies only on devices that support
4 pair POE.
A value of On - indicates that force two pair
mode has been enabled for this port.
A value of Off - indicates that force two pair
mode has been disabled for this port.
The default value is Off.

Context

MIB
HP-ICF-POE-MIB
OID
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.17
Type
column
Access
readwrite
Status
current
Parent
hpicfPoePethPsePortEntry
Table
hpicfPoePethPsePortTable
Siblings
16

Syntax

Enumeration

Values & Constraints

Enumerated Values
1off
2on

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfPoePethPsePortCurrent
This field specifies the current supplied at this port. This value is specified in milli amperes(mA).
columnInteger32.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.1
hpicfPoePethPsePortPowerMode
This field specifies the power mode of the port whether enabled or disabled or disableWithFiber
columnEnumeration.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.10
hpicfPoePethPsePortAveragePower
This field specifies the average power supplied to this port which is used by the device connected to it.
columnwatts SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.11
hpicfPoePethPsePortPeakPower
This field specifies the peak power supplied to this port which is used by the device connected to it.
columnwatts SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.12
hpicfPoePethPsePortPreStdDetect
This field specifies the pre standard detect status for this port. A value of On - indicates that power pre-802.3af-standard devices. A value of Off - indicates that only pre-8…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.13
hpicfPoePethPsePortLowPriority
This object indicates whether a particular port shuts down in the event of any PSU failure in the system. A value of (1) indicates a low priority port which shuts down in the even…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.14
hpicfPoePethPsePortResetState
This object is used to reset the PoE controller HW to which the port is associated.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.15
hpicfPoePethPsePortPowerType
This field specifies the PD type determined during physical layer classification. The default value is -1.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16
hpicfPoePethPsePortVoltage
This field specifies the Voltage supplied at this port. This value is specified in 10's of volts (dV)
columnInteger32.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.2
hpicfPoePethPsePortPower
This field specifies the Power supplied at this port. This value is specified in milliwatts (mW).
columnInteger32.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.3
hpicfPoePethPsePortPowerAllocateBy
This field specifies the power allocation method for this port. The default value is usage.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.4
hpicfPoePethPsePortPowerValue
This field specifies the power allocation defined for this port. This value is specified in Watts (W).
columnInteger32.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.5
hpicfPoePethPsePortLLDPDetect
This field specifies if power should be allocated using LLDP advertised information regarding the PD.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.6
hpicfPoePethPsePortPoePlusPowerValue
This field specifies the power allocation defined for this port. Use this object for equipment supporting high power, that is greater than 15 Watts. This value is specified in W…
columnWatts Integer32.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.7
hpicfPoePethPsePortActualPower
This field specifies the actual power drained by the device connected to this port.
columnmilli-watts SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.8
hpicfPoePethPsePortOperStatus
This field specifies the operational status of the port
columnEnumeration.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.9