GALILEO-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
129

rlPolicyGalileoDebugFcogTable

table
.1.3.6.1.4.1.89.56.7.1 · 1 row entry · 13 columns
Open in standard view 
Indecate the instance of the fcog for hash_fnc calc per group type
rlPolicyGalileoDebugFcogEntry entry .1.3.6.1.4.1.89.56.7.1.1
the entry per groupType indicate the offsets for hash_func calc.
Indexes
rlPolicyGalileoDebugFcogType
Column Syntax OID
rlPolicyGalileoDebugFcogType
Specifies a the Group type for which Fcog bytes specified.
RlPolicyGalileoDebugGroupType
Textual Convention: RlPolicyGalileoDebugGroupType Enumeration
Type Values:
1bridged
2routedIp
3routedIpx
 .1.3.6.1.4.1.89.56.7.1.1.1
rlPolicyGalileoDebugL2SrcAddr
indecate if the L2 SrcAddr defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.2
rlPolicyGalileoDebugL2DstAddr
indecate if the L2DstAddr defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.3
rlPolicyGalileoDebugVlanId
indecate if the VlanId defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.4
rlPolicyGalileoDebugInport
indecate if the Inport defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.5
rlPolicyGalileoDebugIpxDstNet
indecate if the IpxDstNet defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.6
rlPolicyGalileoDebugIpxDstNode
indecate if the IpxDstNode defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.7
rlPolicyGalileoDebugIpSrcAddr
indecate if the IpSrcAddr defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.8
rlPolicyGalileoDebugIpDstAddr
indecate if the IpDstAddr defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.9
rlPolicyGalileoDebugIpProtocol
indecate if the IpProtocol defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.10
rlPolicyGalileoDebugIpSrcPort
indecate if the IpSrcPort defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.11
rlPolicyGalileoDebugIpDstPort
indecate if the IpDstPort defined for fcog.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.1.1.12
rlPolicyGalileoDebugStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.89.56.7.1.1.13

rlPolicyGalileoDebugFlowTable

table
.1.3.6.1.4.1.89.56.7.2 · 1 row entry · 25 columns
Open in standard view 
This table will allow us to request variables from specific entry at the
flowTable. only get and getNext will be supported (getNext will return alyaws
EndOfMibTable)
rlPolicyGalileoDebugFlowTableEntry entry .1.3.6.1.4.1.89.56.7.2.1
all the input fileds has a default val except from the groupType, request of an entry
should be based on the fcog definition.
Indexes
rlPolicyGalileoDebugFlowType rlPolicyGalileoDebugFlowRxIfIndex rlPolicyGalileoDebugFlowL2SrcAddr rlPolicyGalileoDebugFlowL2DstAddr rlPolicyGalileoDebugFlowVlanId rlPolicyGalileoDebugFlowIpxDstNet rlPolicyGalileoDebugFlowIpxDstNode rlPolicyGalileoDebugFlowIpSrcAddr rlPolicyGalileoDebugFlowIpDstAddr rlPolicyGalileoDebugFlowIpProtocol rlPolicyGalileoDebugFlowIpSrcPort rlPolicyGalileoDebugFlowIpDstPort
Column Syntax OID
rlPolicyGalileoDebugFlowType
Specifies a the Group type.
RlPolicyGalileoDebugGroupType
Textual Convention: RlPolicyGalileoDebugGroupType Enumeration
Type Values:
1bridged
2routedIp
3routedIpx
 .1.3.6.1.4.1.89.56.7.2.1.1
rlPolicyGalileoDebugFlowRxIfIndex
Specifies a the IfIndex the packet arrived (for the calculation
of the relevant cosTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.89.56.7.2.1.2
rlPolicyGalileoDebugFlowL2SrcAddr
Indicate the L2SrcAddr for the requsted entry.
OctetString
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.7.2.1.3
rlPolicyGalileoDebugFlowL2DstAddr
Indicate the L2DstAddr for the requsted entry.
OctetString
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.7.2.1.4
rlPolicyGalileoDebugFlowVlanId
Indicate the VlanId for the requsted entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.89.56.7.2.1.5
rlPolicyGalileoDebugFlowIpxDstNet
Indicate the IPX DstNet for the requsted entry.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.89.56.7.2.1.6
rlPolicyGalileoDebugFlowIpxDstNode
Indicate the IPX DstNode for the requsted entry.
OctetString
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.7.2.1.7
rlPolicyGalileoDebugFlowIpSrcAddr
Indicate the IP SrcAddr for the requsted entry.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.89.56.7.2.1.8
rlPolicyGalileoDebugFlowIpDstAddr
Indicate the IP DstAddr for the requsted entry.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.89.56.7.2.1.9
rlPolicyGalileoDebugFlowIpProtocol
Indicate the IP Protocol for the requsted entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.89.56.7.2.1.10
rlPolicyGalileoDebugFlowIpSrcPort
Indicate the IP SrcPort for the requsted entry.
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.89.56.7.2.1.11
rlPolicyGalileoDebugFlowIpDstPort
Indicate the IP DstPort for the requsted entry.
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.89.56.7.2.1.12
rlPolicyGalileoDebugFlowRetValid
Indicate if the requsted entry is valid (exist) or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.2.1.13
rlPolicyGalileoDebugFlowRetStatic
Indicate if the requsted entry is a static entry or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.2.1.14
rlPolicyGalileoDebugFlowRetAging
Indicate if the Aging bit of the requested entry is set or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.2.1.15
rlPolicyGalileoDebugFlowRetCmd
Indicate if the CMD of the requested entry .
Enumeration
Enumerated Values:
1drop
2dropAndTrap
3permit
4permitAndTrap
 .1.3.6.1.4.1.89.56.7.2.1.16
rlPolicyGalileoDebugFlowRetPrio
Indicate if the Pri/Sc of the requested entry .
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.89.56.7.2.1.17
rlPolicyGalileoDebugFlowRetInProfileDis
Indicate if the inProfile Discardability of the requested entry .
Enumeration
Enumerated Values:
1low
2high
3drop
 .1.3.6.1.4.1.89.56.7.2.1.18
rlPolicyGalileoDebugFlowRetVpt
Indicate if the Vpt of the requested entry .
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.89.56.7.2.1.19
rlPolicyGalileoDebugFlowRetChangeTos
Indicate if the Change Tos of the requested entry is set or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.2.1.20
rlPolicyGalileoDebugFlowRetNewTos
Indicate if the New Tos of the requested entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.89.56.7.2.1.21
rlPolicyGalileoDebugFlowRetVlanId
Indicate if the VlanId of the requested entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.89.56.7.2.1.22
rlPolicyGalileoDebugFlowRetInIfIndex
Indicate if the InIfindex of the requested entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.89.56.7.2.1.23
rlPolicyGalileoDebugFlowRetEnableMeter
Indicate if Meter of the requested entry is enbled or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.7.2.1.24
rlPolicyGalileoDebugFlowRetOutProfileDis
Indicate the outProfile Discardability of the requested entry .
Enumeration
Enumerated Values:
1low
2high
3drop
 .1.3.6.1.4.1.89.56.7.2.1.25

rlPolicySimpleGalMibProfileTable

table
.1.3.6.1.4.1.89.56.9.5 · 1 row entry · 10 columns
Open in standard view 
The table defines all the profiles.
rlPolicySimpleGalMibProfileEntry entry .1.3.6.1.4.1.89.56.9.5.1
The entry define one profile.
Indexes
rlPolicySimpleGalMibIndex
Column Syntax OID
rlPolicySimpleGalMibIndex
This enumerates the table entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.89.56.9.5.1.1
rlPolicySimpleGalMibDescription
Informational text given by the user to describe the profile.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.89.56.9.5.1.2
rlPolicySimpleGalMibProfileType
Specifies a profile type.
RlPolicySimpleGalMibProfileTyper/w
Textual Convention: RlPolicySimpleGalMibProfileType Enumeration
Type Values:
1minBandwidth
2bandwidthGuarantee
3minDelay
4minDelayPerSession
 .1.3.6.1.4.1.89.56.9.5.1.3
rlPolicySimpleGalMibRate
The rate in kilobytes/second for the specified profile,
or in the case of minDelay per session profile type the rate will
indicate the rate per individual session
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.89.56.9.5.1.4
rlPolicySimpleGalMibBurstSize
The burst size parameter. A value of 0 means that
the device should choose the Burst Size
that is most suitable for the profile.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.89.56.9.5.1.5
rlPolicySimpleGalMibMaxSession
Relevant only for the minDelay per session.
Indicate the maximum number of sessions for this profile.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.89.56.9.5.1.6
rlPolicySimpleGalMibNewVpt
Indicates the new VPT to assign to the packet.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.89.56.9.5.1.7
rlPolicySimpleGalMibChangeTosOrDscp
Indicates whether the TOS or DSCP should be remarked with
a new value
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.5.1.8
rlPolicySimpleGalMibNewTosOrDscp
Indicates the new value for the TOS or DSCP. Relevant only if
rlPolicySimpleGalMibChangeTosOrDscp is true.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.89.56.9.5.1.9
rlPolicySimpleGalMibStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.89.56.9.5.1.10

rlPolicySimpleGalMibIpFcogTable

table
.1.3.6.1.4.1.89.56.9.6 · 1 row entry · 8 columns
Open in standard view 
This table defines the used fields for ip classification,
per port type (interior/boundary)
rlPolicySimpleGalMibIpFcogEntry entry .1.3.6.1.4.1.89.56.9.6.1
the entry define the used fields for classification
Indexes
rlPolicySimpleGalMibIpFcogPortType
Column Syntax OID
rlPolicySimpleGalMibIpFcogPortType
The port type (interior/boundary) to which this entry applies.
RlPolicySimpleGalMibPortType
Textual Convention: RlPolicySimpleGalMibPortType Enumeration
Type Values:
1boundary
2interior
 .1.3.6.1.4.1.89.56.9.6.1.1
rlPolicySimpleGalMibIpFcogTosOrDscp
Indicates whether the IP TOS or DSCP field will be used in
classifiers or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.6.1.2
rlPolicySimpleGalMibIpFcogProtocol
Indicates whether the IP L4 protocol field will be used in
classifiers or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.6.1.3
rlPolicySimpleGalMibIpFcogSrcIpMask
Indicates the number of most significant bits of the Ip Address
that are used in specifying IP source addresses in classifiers.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.89.56.9.6.1.4
rlPolicySimpleGalMibIpFcogDstIpMask
Indicates the number of most significant bits of the Ip Address
that are used in specifying IP destination addresses in classifiers.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.89.56.9.6.1.5
rlPolicySimpleGalMibIpFcogSrcPort
Indicates whether the IP L4 protocol source port field will be used in
classifiers or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.6.1.6
rlPolicySimpleGalMibIpFcogDstPort
Indicates whether the IP L4 protocol destination port field will be
used in classifiers or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.6.1.7
rlPolicySimpleGalMibIpFcogInIfIndex
Indicates whether ifIndex of input ports will be used in
classifiers or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.6.1.8

rlPolicySimpleGalMibIpRulesTable

table
.1.3.6.1.4.1.89.56.9.7 · 1 row entry · 19 columns
Open in standard view 
This table contains the policy rules defined by the user. The order
of the entries in the table is important, since the first rule that
applies to the incoming packet will be acted upon, ignoring any
further rules that may apply as well.
rlPolicySimpleGalMibIpRulesEntry entry .1.3.6.1.4.1.89.56.9.7.1
This entry defines one policy rule.
Indexes
rlPolicySimpleGalMibIpRulesPortType rlPolicySimpleGalMibIpRulesIndex
Column Syntax OID
rlPolicySimpleGalMibIpRulesPortType
The port type (interior/boundary) to which this rule applies.
RlPolicySimpleGalMibPortType
Textual Convention: RlPolicySimpleGalMibPortType Enumeration
Type Values:
1boundary
2interior
 .1.3.6.1.4.1.89.56.9.7.1.1
rlPolicySimpleGalMibIpRulesIndex
This enumerates the table. The user should assign indices in such a
way that there will be a gap big enough between one rule and the next
to allow insertion of additional rules in between (a gap of 1000 is
recommended).
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.89.56.9.7.1.2
rlPolicySimpleGalMibIpRulesDescription
Informational text given by the user to describe the rule.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.89.56.9.7.1.3
rlPolicySimpleGalMibIpRulesTosOrDscp
Indicates the TOS or DSCP to compare with.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.89.56.9.7.1.4
rlPolicySimpleGalMibIpRulesProtocol
Indicates the L4 protocol to compare with.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.89.56.9.7.1.5
rlPolicySimpleGalMibIpRulesSrcIp
Indicates the source IP address to compare with.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.89.56.9.7.1.6
rlPolicySimpleGalMibIpRulesSrcIpMask
Indicates the number of most significant bits of the Ip Address
that are used in specifying IP source addresses in classifiers.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.89.56.9.7.1.7
rlPolicySimpleGalMibIpRulesDstIp
Indicates the destination IP address to compare with.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.89.56.9.7.1.8
rlPolicySimpleGalMibIpRulesDstIpMask
Indicates the number of most significant bits of the Ip Address
that are used in specifying IP destination addresses in classifiers.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.89.56.9.7.1.9
rlPolicySimpleGalMibIpRulesSrcPort
Indicates the source L4 port to compare with.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.89.56.9.7.1.10
rlPolicySimpleGalMibIpRulesDstPort
Indicates the destination L4 port to compare with.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.89.56.9.7.1.11
rlPolicySimpleGalMibIpRulesInIfIndexList
Indicates the list of input ports to which this rule applies.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.89.56.9.7.1.12
rlPolicySimpleGalMibIpRulesCondition
Indicate the relation that should hold for each relevant field of
the rule in comparison to the packet's field.
Enumerationr/w
Enumerated Values:
1equal
2notEqual
3bigger
4smaller
 .1.3.6.1.4.1.89.56.9.7.1.13
rlPolicySimpleGalMibIpRulesAction
Indicates the action to be performed if there is a match with the rule.
Enumerationr/w
Enumerated Values:
1block
2blockAndTrap
3permitAndTrap
4permit
 .1.3.6.1.4.1.89.56.9.7.1.14
rlPolicySimpleGalMibIpRulesProfilePointer
Indicates the profile attached to the rule. The
value is the index in the profile table of the attached profile.
Value 0 means that no profile is attached to the rule and is valid only
in case of action block.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.89.56.9.7.1.15
rlPolicySimpleGalMibIpRulesOutIfIndexList
Indicates the list of output ports to on which bandwidth should be
allocated for this rule.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.89.56.9.7.1.16
rlPolicySimpleGalMibIpRulesBitsUsed
a bit mask that indicates the the used fields for the entry:
(the implemention is identical to BITS implementation,from MSB to LSB)
----------
|87654321|
----------
8 - tosOrDscp
7 - Protocol
6 - SrcIp
5 - DstIp
…
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.89.56.9.7.1.17
rlPolicySimpleGalMibIpRulesErrorDescrip
A description error indicate the user about the specific error.
The error can cause by one of the following reasons:
1. if the profile was asign to the rule could not be perform
2. if the operation of QoS portLock failed
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.89.56.9.7.1.18
rlPolicySimpleGalMibIpRulesStatus
The status of a table entry.
It is used to delete an entry from this table.
notInService is used to disable an entry.
notReady will be assigned by the device to indicate that the rule
can not be active because some port…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.89.56.9.7.1.19

rlPolicySimpleGalMibIpxFcogTable

table
.1.3.6.1.4.1.89.56.9.8 · 1 row entry · 8 columns
Open in standard view 
This table defines the used fields for ipx classification
rlPolicySimpleGalMibIpxFcogEntry entry .1.3.6.1.4.1.89.56.9.8.1
the entry defines the used fields for classification
Indexes
rlPolicySimpleGalMibIpxFcogIndex
Column Syntax OID
rlPolicySimpleGalMibIpxFcogIndex
the table index - only one entry exist
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.89.56.9.8.1.1
rlPolicySimpleGalMibIpxFcogDstNet
Indicates the parts of the field in use in the rules
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.89.56.9.8.1.2
rlPolicySimpleGalMibIpxFcogDstNode
Indicates the parts of the field in use in the rules
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.9.8.1.3
rlPolicySimpleGalMibIpxFcogDstSocket
Indicates whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.8.1.4
rlPolicySimpleGalMibIpxFcogSrcNet
Indicates the parts of the field in use in the rules
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.89.56.9.8.1.5
rlPolicySimpleGalMibIpxFcogSrcNode
Indicates the parts of the field in use in the rules
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.9.8.1.6
rlPolicySimpleGalMibIpxFcogSrcSocket
Indicates whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.8.1.7
rlPolicySimpleGalMibIpxFcogInIfIndex
Indicates whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.8.1.8

rlPolicySimpleGalMibIpxRulesTable

table
.1.3.6.1.4.1.89.56.9.9 · 1 row entry · 14 columns
Open in standard view 
This table contains the policy rules defined by the user. The order
of the entries in the table is important, since the first rule that
matches the incoming packet will be acted upon, ignoring any
further rules that may match as well.
rlPolicySimpleGalMibIpxRulesEntry entry .1.3.6.1.4.1.89.56.9.9.1
This entry defines one policy rule.
Indexes
rlPolicySimpleGalMibIpxRulesIndex
Column Syntax OID
rlPolicySimpleGalMibIpxRulesIndex
This enumerates the table. The user should assign indices in such a
way that there will be a gap big enough between one rule and the next
to allow insertion of additional rules in between (a gap of 1000 is
recommended).
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.89.56.9.9.1.1
rlPolicySimpleGalMibIpxRulesDescription
Informational text given by the user to describe the rule.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.89.56.9.9.1.2
rlPolicySimpleGalMibIpxRulesDstNet
Indicate the ipxDst Net to compare to
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.89.56.9.9.1.3
rlPolicySimpleGalMibIpxRulesDstNode
Indicate the ipxDstNode to compare to
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.9.9.1.4
rlPolicySimpleGalMibIpxRulesDstSocket
Indicate the ipx DstSocket to compare to
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.89.56.9.9.1.5
rlPolicySimpleGalMibIpxRulesSrcNet
Indicate the ipxSrc Net to compare to
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.89.56.9.9.1.6
rlPolicySimpleGalMibIpxRulesSrcNode
Indicate the ipxSrcNode to compare to
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.9.9.1.7
rlPolicySimpleGalMibIpxRulesSrcSocket
Indicate the ipx SrcSocket to compare to
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.89.56.9.9.1.8
rlPolicySimpleGalMibIpxRulesInIfIndexList
Indicates the list of input ports to which this rule applies.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.89.56.9.9.1.9
rlPolicySimpleGalMibIpxRulesCondition
Indicate the relation that should hold for each relevant field of
the rule in comparison to the packet's.
Enumerationr/w
Enumerated Values:
1equal
2notEqual
3bigger
4smaller
 .1.3.6.1.4.1.89.56.9.9.1.10
rlPolicySimpleGalMibIpxRulesAction
Indicates the action to be performed if the rule matches.
Enumerationr/w
Enumerated Values:
1block
2blockAndTrap
3permitAndTrap
4permit
 .1.3.6.1.4.1.89.56.9.9.1.11
rlPolicySimpleGalMibIpxRulesProfilePointer
Indicates the profile attached to the rule. The
value is the index in the profile table of the attached profile.
Value 0 means that no profile is attached to the rule and is valid only
in case of action block.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.89.56.9.9.1.12
rlPolicySimpleGalMibIpxRulesOutIfIndexList
Indicates the list of output ports on which bandwidth should be
allocated for this rule.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.89.56.9.9.1.13
rlPolicySimpleGalMibIpxRulesStatus
The status of a table entry.
It is used to delete an entry from this table.
notInService is used to disable an entry.
notReady will be assigned by the device to indicate that the rule
can not be active because some port…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.89.56.9.9.1.14

rlPolicySimpleGalMibBridgeFcogTable

table
.1.3.6.1.4.1.89.56.9.10 · 1 row entry · 12 columns
Open in standard view 
The table defines the used fields for Bridge classification
rlPolicySimpleGalMibBridgeFcogEntry entry .1.3.6.1.4.1.89.56.9.10.1
the entry defines the used fields for classification
Indexes
rlPolicySimpleGalMibBridgeFcogIndex
Column Syntax OID
rlPolicySimpleGalMibBridgeFcogIndex
the table index - only one entry exist
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.89.56.9.10.1.1
rlPolicySimpleGalMibBridgeFcogDstMac
Indicate the use of the field in the rules
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.9.10.1.2
rlPolicySimpleGalMibBridgeFcogSrcMac
Indicate the use of the field in the rules
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.9.10.1.3
rlPolicySimpleGalMibBridgeFcogVid
Indicate whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.10.1.4
rlPolicySimpleGalMibBridgeFcogInIfIndex
Indicate whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.10.1.5
rlPolicySimpleGalMibBridgeFcogEthType
Indicate whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.10.1.6
rlPolicySimpleGalMibBridgeFcogIpTosOrDscp
Indicate whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.10.1.7
rlPolicySimpleGalMibBridgeFcogIpProtocol
Indicate whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.10.1.8
rlPolicySimpleGalMibBridgeFcogIpSrcIpMask
Indicate the number of used bits of the Ip Address from the left
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.89.56.9.10.1.9
rlPolicySimpleGalMibBridgeFcogIpDstIpMask
Indicate the number of used bits of the Ip Address from the left
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.89.56.9.10.1.10
rlPolicySimpleGalMibBridgeFcogIpSrcPort
Indicate whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.10.1.11
rlPolicySimpleGalMibBridgeFcogIpDstPort
Indicate whether the field is in use in the rules
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.89.56.9.10.1.12

rlPolicySimpleGalMibBridgeRulesTable

table
.1.3.6.1.4.1.89.56.9.11 · 1 row entry · 18 columns
Open in standard view 
This table contains the policy rules defined by the user. The order
of the entries in the table is important, since the first rule that
applies to the incoming packet will be acted upon, ignoring any
further rules that may apply as well.
rlPolicySimpleGalMibBridgeRulesEntry entry .1.3.6.1.4.1.89.56.9.11.1
This entry defines one policy rule.
Indexes
rlPolicySimpleGalMibBridgeRulesIndex
Column Syntax OID
rlPolicySimpleGalMibBridgeRulesIndex
This enumerates the table. The user should assign indices in such a
way that there will be a gap big enough between one rule and the next
to allow insertion of additional rules in between (a gap of 1000 is
recommended).
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.89.56.9.11.1.1
rlPolicySimpleGalMibBridgeRulesDescription
Informational text given by the user to describe the rule.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.89.56.9.11.1.2
rlPolicySimpleGalMibBridgeRulesDstMac
Indicate the Dst mac to compare
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.9.11.1.3
rlPolicySimpleGalMibBridgeRulesSrcMac
Indicate the source mac to compare
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.89.56.9.11.1.4
rlPolicySimpleGalMibBridgeRulesVid
Indicate the vlanId to compare
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.89.56.9.11.1.5
rlPolicySimpleGalMibBridgeRulesInIfIndexList
Indicates the list of input ports to which this rule applies.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.89.56.9.11.1.6
rlPolicySimpleGalMibBridgeRulesEthType
Indicate the Ethernet type of the packet
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.89.56.9.11.1.7
rlPolicySimpleGalMibBridgeRulesIpTosOrDscp
Indicates the tos or dscp to compare
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.89.56.9.11.1.8
rlPolicySimpleGalMibBridgeRulesIpProtocol
Indicates the protocol to compare
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.89.56.9.11.1.9
rlPolicySimpleGalMibBridgeRulesIpSrcIp
Indicate the srcIp to compare
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.89.56.9.11.1.10
rlPolicySimpleGalMibBridgeRulesIpDstIp
Indicate the DstIp to compare
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.89.56.9.11.1.11
rlPolicySimpleGalMibBridgeRulesIpSrcPort
Indicate the Src port to compare
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.89.56.9.11.1.12
rlPolicySimpleGalMibBridgeRulesIpDstPort
Indicate the Src port to compare
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.89.56.9.11.1.13
rlPolicySimpleGalMibBridgeRulesCondition
Indicate the relation that should hold for each relevant field of
the rule in comparison to the packet's field.
Enumerationr/w
Enumerated Values:
1equal
2notEqual
3bigger
4smaller
 .1.3.6.1.4.1.89.56.9.11.1.14
rlPolicySimpleGalMibBridgeRulesAction
Indicates the action to be performed if there is a match with the rule.
Enumerationr/w
Enumerated Values:
1block
2blockAndTrap
3permitAndTrap
4permit
 .1.3.6.1.4.1.89.56.9.11.1.15
rlPolicySimpleGalMibBridgeRulesProfilePointer
Indicates the profile attached to the rule. The
value is the index in the profile table of the attached profile.
Value 0 means that no profile is attached to the rule and is valid only
in case of action block.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.89.56.9.11.1.16
rlPolicySimpleGalMibBridgeRulesOutIfIndexList
Indicates the list of output ports to on which bandwidth should be
allocated for this rule.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.89.56.9.11.1.17
rlPolicySimpleGalMibBridgeRulesStatus
The status of a table entry.
It is used to delete an entry from this table.
notInService is used to disable an entry.
notReady will be assigned by the device to indicate that the rule
can not be active because some port…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.89.56.9.11.1.18

rlPolicySimpleGalMibPortTable

table
.1.3.6.1.4.1.89.56.9.12 · 1 row entry · 2 columns
Open in standard view 
The table defines all of the ports types
rlPolicySimpleGalMibPortEntry entry .1.3.6.1.4.1.89.56.9.12.1
An entry defines a port's type
Indexes
rlPolicySimpleGalMibPortIfIndex
Column Syntax OID
rlPolicySimpleGalMibPortIfIndex
This enumerates the table entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.89.56.9.12.1.1
rlPolicySimpleGalMibPortType
Defines the port type
RlPolicySimpleGalMibPortTyper/w
Textual Convention: RlPolicySimpleGalMibPortType Enumeration
Type Values:
1boundary
2interior
 .1.3.6.1.4.1.89.56.9.12.1.2