rlPolicySimpleGalMibIpRulesStatus
GALILEO-MIB ·
.1.3.6.1.4.1.89.56.9.7.1.19
Object
The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some ports in the output ports list are not in a state allowing bandwidth allocation guarantee.
Context
- MIB
- GALILEO-MIB
- OID
.1.3.6.1.4.1.89.56.9.7.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rlPolicySimpleGalMibIpRulesEntry
- Table
- rlPolicySimpleGalMibIpRulesTable
- Siblings
- 18
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPolicySimpleGalMibIpRulesPortType The port type (interior/boundary) to which this rule applies. | column | RlPolicySimpleGalMibPortType | .1.3.6.1.4.1.89.56.9.7.1.1 |
| rlPolicySimpleGalMibIpRulesSrcPort Indicates the source L4 port to compare with. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.10 |
| rlPolicySimpleGalMibIpRulesDstPort Indicates the destination L4 port to compare with. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.11 |
| rlPolicySimpleGalMibIpRulesInIfIndexList Indicates the list of input ports to which this rule applies. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.56.9.7.1.12 |
| rlPolicySimpleGalMibIpRulesCondition Indicate the relation that should hold for each relevant field of
the rule in comparison to the packet's field. | column | Enumeration | .1.3.6.1.4.1.89.56.9.7.1.13 |
| rlPolicySimpleGalMibIpRulesAction Indicates the action to be performed if there is a match with the rule. | column | Enumeration | .1.3.6.1.4.1.89.56.9.7.1.14 |
| rlPolicySimpleGalMibIpRulesProfilePointer Indicates the profile attached to the rule. The
value is the index in the profile table of the attached profile.
Value 0 means that no profile is attached to the rule and is valid… | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.15 |
| rlPolicySimpleGalMibIpRulesOutIfIndexList Indicates the list of output ports to on which bandwidth should be
allocated for this rule. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.56.9.7.1.16 |
| rlPolicySimpleGalMibIpRulesBitsUsed a bit mask that indicates the the used fields for the entry:
(the implemention is identical to BITS implementation,from MSB to LSB)
----------
|87654321|
----------
8 - tosOrD… | column | OctetString | .1.3.6.1.4.1.89.56.9.7.1.17 |
| rlPolicySimpleGalMibIpRulesErrorDescrip A description error indicate the user about the specific error.
The error can cause by one of the following reasons:
1. if the profile was asign to the rule could not be perform
2… | column | OctetString | .1.3.6.1.4.1.89.56.9.7.1.18 |
| rlPolicySimpleGalMibIpRulesIndex This enumerates the table. The user should assign indices in such a
way that there will be a gap big enough between one rule and the next
to allow insertion of additional rules in… | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.2 |
| rlPolicySimpleGalMibIpRulesDescription Informational text given by the user to describe the rule. | column | OctetString | .1.3.6.1.4.1.89.56.9.7.1.3 |
| rlPolicySimpleGalMibIpRulesTosOrDscp Indicates the TOS or DSCP to compare with. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.4 |
| rlPolicySimpleGalMibIpRulesProtocol Indicates the L4 protocol to compare with. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.5 |
| rlPolicySimpleGalMibIpRulesSrcIp Indicates the source IP address to compare with. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.89.56.9.7.1.6 |
| rlPolicySimpleGalMibIpRulesSrcIpMask Indicates the number of most significant bits of the Ip Address
that are used in specifying IP source addresses in classifiers. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.7 |
| rlPolicySimpleGalMibIpRulesDstIp Indicates the destination IP address to compare with. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.89.56.9.7.1.8 |
| rlPolicySimpleGalMibIpRulesDstIpMask Indicates the number of most significant bits of the Ip Address
that are used in specifying IP destination addresses in classifiers. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.9 |