rlPolicySimpleGalMibIpRulesErrorDescrip

GALILEO-MIB · .1.3.6.1.4.1.89.56.9.7.1.18

MIB view Table view

Object

column OctetString

A description error indicate the user about the specific error.
The error can cause by one of the following reasons:
1. if the profile was asign to the rule could not be perform
2. if the operation of QoS portLock failed

Context

MIB: GALILEO-MIB
OID: .1.3.6.1.4.1.89.56.9.7.1.18
Type: column
Access: readonly
Status: current
Parent: rlPolicySimpleGalMibIpRulesEntry
Table: rlPolicySimpleGalMibIpRulesTable
Siblings: 18

Syntax

OctetString

Values & Constraints

Object Constraints

range: 0-20

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rlPolicySimpleGalMibIpRulesPortType The port type (interior/boundary) to which this rule applies.	column	RlPolicySimpleGalMibPortType	`.1.3.6.1.4.1.89.56.9.7.1.1`
rlPolicySimpleGalMibIpRulesSrcPort Indicates the source L4 port to compare with.	column	Integer32	`.1.3.6.1.4.1.89.56.9.7.1.10`
rlPolicySimpleGalMibIpRulesDstPort Indicates the destination L4 port to compare with.	column	Integer32	`.1.3.6.1.4.1.89.56.9.7.1.11`
rlPolicySimpleGalMibIpRulesInIfIndexList Indicates the list of input ports to which this rule applies.	column	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.89.56.9.7.1.12`
rlPolicySimpleGalMibIpRulesCondition Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's field.	column	Enumeration	`.1.3.6.1.4.1.89.56.9.7.1.13`
rlPolicySimpleGalMibIpRulesAction Indicates the action to be performed if there is a match with the rule.	column	Enumeration	`.1.3.6.1.4.1.89.56.9.7.1.14`
rlPolicySimpleGalMibIpRulesProfilePointer Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid…	column	Integer32	`.1.3.6.1.4.1.89.56.9.7.1.15`
rlPolicySimpleGalMibIpRulesOutIfIndexList Indicates the list of output ports to on which bandwidth should be allocated for this rule.	column	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.89.56.9.7.1.16`
rlPolicySimpleGalMibIpRulesBitsUsed a bit mask that indicates the the used fields for the entry: (the implemention is identical to BITS implementation,from MSB to LSB) ---------- \|87654321\| ---------- 8 - tosOrD…	column	OctetString	`.1.3.6.1.4.1.89.56.9.7.1.17`
rlPolicySimpleGalMibIpRulesStatus The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the …	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.89.56.9.7.1.19`
rlPolicySimpleGalMibIpRulesIndex This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in…	column	Integer32	`.1.3.6.1.4.1.89.56.9.7.1.2`
rlPolicySimpleGalMibIpRulesDescription Informational text given by the user to describe the rule.	column	OctetString	`.1.3.6.1.4.1.89.56.9.7.1.3`
rlPolicySimpleGalMibIpRulesTosOrDscp Indicates the TOS or DSCP to compare with.	column	Integer32	`.1.3.6.1.4.1.89.56.9.7.1.4`
rlPolicySimpleGalMibIpRulesProtocol Indicates the L4 protocol to compare with.	column	Integer32	`.1.3.6.1.4.1.89.56.9.7.1.5`
rlPolicySimpleGalMibIpRulesSrcIp Indicates the source IP address to compare with.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.89.56.9.7.1.6`
rlPolicySimpleGalMibIpRulesSrcIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.	column	Integer32	`.1.3.6.1.4.1.89.56.9.7.1.7`
rlPolicySimpleGalMibIpRulesDstIp Indicates the destination IP address to compare with.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.89.56.9.7.1.8`
rlPolicySimpleGalMibIpRulesDstIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.	column	Integer32	`.1.3.6.1.4.1.89.56.9.7.1.9`