rlPolicySimpleGalMibIpRulesPortType
GALILEO-MIB ·
.1.3.6.1.4.1.89.56.9.7.1.1
Object
column
RlPolicySimpleGalMibPortType
The port type (interior/boundary) to which this rule applies.
Context
- MIB
- GALILEO-MIB
- OID
.1.3.6.1.4.1.89.56.9.7.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rlPolicySimpleGalMibIpRulesEntry
- Table
- rlPolicySimpleGalMibIpRulesTable
- Siblings
- 18
Syntax
RlPolicySimpleGalMibPortType
- Source
- RlPolicySimpleGalMibPortType
- Base type
Enumeration
Values & Constraints
Type Values
1 | boundary |
2 | interior |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPolicySimpleGalMibIpRulesSrcPort Indicates the source L4 port to compare with. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.10 |
| rlPolicySimpleGalMibIpRulesDstPort Indicates the destination L4 port to compare with. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.11 |
| rlPolicySimpleGalMibIpRulesInIfIndexList Indicates the list of input ports to which this rule applies. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.56.9.7.1.12 |
| rlPolicySimpleGalMibIpRulesCondition Indicate the relation that should hold for each relevant field of
the rule in comparison to the packet's field. | column | Enumeration | .1.3.6.1.4.1.89.56.9.7.1.13 |
| rlPolicySimpleGalMibIpRulesAction Indicates the action to be performed if there is a match with the rule. | column | Enumeration | .1.3.6.1.4.1.89.56.9.7.1.14 |
| rlPolicySimpleGalMibIpRulesProfilePointer Indicates the profile attached to the rule. The
value is the index in the profile table of the attached profile.
Value 0 means that no profile is attached to the rule and is valid… | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.15 |
| rlPolicySimpleGalMibIpRulesOutIfIndexList Indicates the list of output ports to on which bandwidth should be
allocated for this rule. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.56.9.7.1.16 |
| rlPolicySimpleGalMibIpRulesBitsUsed a bit mask that indicates the the used fields for the entry:
(the implemention is identical to BITS implementation,from MSB to LSB)
----------
|87654321|
----------
8 - tosOrD… | column | OctetString | .1.3.6.1.4.1.89.56.9.7.1.17 |
| rlPolicySimpleGalMibIpRulesErrorDescrip A description error indicate the user about the specific error.
The error can cause by one of the following reasons:
1. if the profile was asign to the rule could not be perform
2… | column | OctetString | .1.3.6.1.4.1.89.56.9.7.1.18 |
| rlPolicySimpleGalMibIpRulesStatus The status of a table entry.
It is used to delete an entry from this table.
notInService is used to disable an entry.
notReady will be assigned by the device to indicate that the … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.89.56.9.7.1.19 |
| rlPolicySimpleGalMibIpRulesIndex This enumerates the table. The user should assign indices in such a
way that there will be a gap big enough between one rule and the next
to allow insertion of additional rules in… | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.2 |
| rlPolicySimpleGalMibIpRulesDescription Informational text given by the user to describe the rule. | column | OctetString | .1.3.6.1.4.1.89.56.9.7.1.3 |
| rlPolicySimpleGalMibIpRulesTosOrDscp Indicates the TOS or DSCP to compare with. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.4 |
| rlPolicySimpleGalMibIpRulesProtocol Indicates the L4 protocol to compare with. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.5 |
| rlPolicySimpleGalMibIpRulesSrcIp Indicates the source IP address to compare with. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.89.56.9.7.1.6 |
| rlPolicySimpleGalMibIpRulesSrcIpMask Indicates the number of most significant bits of the Ip Address
that are used in specifying IP source addresses in classifiers. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.7 |
| rlPolicySimpleGalMibIpRulesDstIp Indicates the destination IP address to compare with. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.89.56.9.7.1.8 |
| rlPolicySimpleGalMibIpRulesDstIpMask Indicates the number of most significant bits of the Ip Address
that are used in specifying IP destination addresses in classifiers. | column | Integer32 | .1.3.6.1.4.1.89.56.9.7.1.9 |