ECS4100-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

207

Rows

207

Columns

1,233

switchInfoTable

table

.1.3.6.1.4.1.259.10.1.46.1.1.3 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
the switch units in this system.

switchInfoEntry entry .1.3.6.1.4.1.259.10.1.46.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

swUnitIndex

Column Syntax OID

swUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.1

swHardwareVer

Hardware version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.2

swMicrocodeVer

Microcode version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.3

swLoaderVer

Loader version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.4

swOpCodeVer

Operation code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.6

swPortNumber

The number of ports on this switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.7

swPowerStatus

Indicates the switch using internalPower(1),
redundantPower(2) or both(3)

Enumeration

Enumerated Values:

1	internalPower
2	redundantPower
3	internalAndRedundantPower

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.8

swRoleInSystem

Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.

Enumeration

Enumerated Values:

1	master
2	backupMaster
3	slave

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.9

swSerialNumber

Serial number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.10

swServiceTag

Service tag serial-number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.13

swModelNumber

Model number of the switch.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.14

swEpldVer

The EPLD version of the switch.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.15

swLinuxVersion

The Linux Kernel version of the switch.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.10.1.46.1.1.3.1.17

switchThermalTempTable

table

.1.3.6.1.4.1.259.10.1.46.1.1.11 · 1 row entry · 3 columns

Open in standard view

The table which collects switch temperature information.

switchThermalTempEntry entry .1.3.6.1.4.1.259.10.1.46.1.1.11.1

A conceptual row of the switchThermalTempTable.

Indexes

switchThermalTempUnitIndex switchThermalTempThermalIndex

Column	Syntax	OID
switchThermalTempUnitIndex The unit of the switch for stackable device.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.259.10.1.46.1.1.11.1.1`
switchThermalTempThermalIndex The thermal index of the switch.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.259.10.1.46.1.1.11.1.2`
switchThermalTempValue The temperature of the device in degrees Celsius.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.1.11.1.3`

portTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.1 · 1 row entry · 16 columns

Open in standard view

Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk.

portEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column Syntax OID

portIndex

The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.1

portName

The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later).

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.2

portType

Indicates the port type of the configuration of the switch.

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseSfp
9	hundredBaseFxScSingleMode
10	hundredBaseFxScMultiMode
11	thousandBaseCX
12	tenG

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.3

portSpeedDpxCfg

Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half…

Enumerationr/w

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
5	tx
6	rx

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.5

portCapabilities

Port or trunk capabilities.

Bitsr/w

Enumerated Values:

0	portCap10half
1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	portCap10gHalf
7	portCap10gFull
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.6

portAutonegotiation

Whether auto-negotiation is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case t…

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently confi…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.9

portTrunkIndex

The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding tru…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.10

portComboForcedMode

This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal…

Enumerationr/w

Enumerated Values:

1	none
2	reserved2
3	reserved3
4	sfpForced
5	reserved5

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.12

portMasterSlaveModeCfg

Configures the PHY mode when auto negotiation is disabled and
speed-duplex is 1000full for giga copper port.

Enumerationr/w

Enumerated Values:

1	master
2	slave
3	auto
4	autoPreferMaster
5	autoPreferSlave

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.15

portMacAddrLearningStatus

Set this variable to enabled(1) to start to learn MAC
addresses. Set this variable to disabled(2) to stop to
learn MAC addresses.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.17

portMacAddrLearningCount

The current number of learned MAC addresses.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.18

portUpTime

The port up time (in hundredths of a second).

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.19

portShutdownReason

The reason of port shutdown. The value is 0 if no
shutdown action is applied to this port.

Bits

Enumerated Values:

0	admin
1	stpLbd
2	stpBpduGuard
3	networkAccessPortLinkDetection
4	networkAccessPortDynamicQos
5	portSec
6	lbd
7	atcBstorm
8	atcMstorm
9	udld

.1.3.6.1.4.1.259.10.1.46.1.2.1.1.20

cableDiagResultTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.3.2 · 1 row entry · 10 columns

Open in standard view

Table for cable diagnostics result.

cableDiagResultEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.3.2.1

Entry for cable diagnostics result.

Indexes

cableDiagResultIfIndex

Column Syntax OID

cableDiagResultIfIndex

This is defined as the ifIndex.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.1

cableDiagResultStatusPairA

The result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack …

Enumeration

Enumerated Values:

1	notTestedYet
2	ok
3	open
4	short
8	impedanceMismatch
9	failed
10	notSupported
11	noCable

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.2

cableDiagResultStatusPairB

Enumeration

Enumerated Values:

1	notTestedYet
2	ok
3	open
4	short
8	impedanceMismatch
9	failed
10	notSupported
11	noCable

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.3

cableDiagResultStatusPairC

Enumeration

Enumerated Values:

1	notTestedYet
2	ok
3	open
4	short
8	impedanceMismatch
9	failed
10	notSupported
11	noCable

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.4

cableDiagResultStatusPairD

Enumeration

Enumerated Values:

1	notTestedYet
2	ok
3	open
4	short
8	impedanceMismatch
9	failed
10	notSupported
11	noCable

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.5

cableDiagResultDistancePairA

Displays the fault distance of pair A of the cable
in meters.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.6

cableDiagResultDistancePairB

Displays the fault distance of pair B of the cable
in meters.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.7

cableDiagResultDistancePairC

Displays the fault distance of pair C of the cable
in meters.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.8

cableDiagResultDistancePairD

Displays the fault distance of pair D of the cable
in meters.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.9

cableDiagResultTime

Displays the last time of cable diagnostics.
For example, 'Jan 1 02:03:04 2002'.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.10.1.46.1.2.3.2.1.11

portUtilTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.6 · 1 row entry · 7 columns

Open in standard view

Dispalys port utilization during recent 300 seconds.

portUtilEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.6.1

Dispalys port utilization during recent 300 seconds.

Indexes

portUtilIfIndex

Column	Syntax	OID
portUtilIfIndex The port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.2.6.1.1`
portInOctetRate The input octet rate (kbits/sec) of the port.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.6.1.2`
portInPacketRate The input packet rate (pkts/sec) of the port.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.6.1.3`
portInUtil The input utilization of the port, in one per hundred.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.2.6.1.4`
portOutOctetRate The output octet rate (kbits/sec) of the port.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.6.1.5`
portOutPacketRate The output packet rate (pkts/sec) of the port.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.6.1.6`
portOutUtil The output utilization of the port, in one per hundred.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.2.6.1.7`

portHistControlTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.8.1 · 1 row entry · 7 columns

Open in standard view

A list of history control entries.

portHistControlEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.8.1.1

A list of parameters that set up a periodic sampling of
statistics.

Indexes

portHistControlIndex

Column Syntax OID

portHistControlIndex

An index that uniquely identifies an entry in the
portHistControl table.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.46.1.2.8.1.1.1

portHistControlName

A textual name of the entity. It is mandatory that
this only contain printable ASCII characters.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.259.10.1.46.1.2.8.1.1.2

portHistControlDataSource

This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
portHistControlEntry. This source can be any
interface on this device.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.8.1.1.3

portHistControlInterval

The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
portHistControlEntry. This interval can
be set to any number of seconds between 1 and
…

MinutesInteger32r/w

Constraints:
range: 1-86400

.1.3.6.1.4.1.259.10.1.46.1.2.8.1.1.4

portHistControlBucketsRequested

The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
portHistControlEntry.

Integer32r/w

Constraints:
range: 1-96

.1.3.6.1.4.1.259.10.1.46.1.2.8.1.1.5

portHistControlBucketsGranted

The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
portHistControlEntry.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.259.10.1.46.1.2.8.1.1.6

portHistControlStatus

The status of this portHistControl entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.2.8.1.1.7

portHistCurrentTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.8.2 · 1 row entry · 18 columns

Open in standard view

A list of Ethernet history entries.

portHistCurrentEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.8.2.1

An historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
portHistControlEntry which set up the parameters for
a regular collection of these samples.

Indexes

portHistCurrentIndex

Column	Syntax	OID
portHistCurrentIndex The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of portHistControlIndex.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.1`
portHistCurrentSampleIndex An index that uniquely identifies the particular sample this entry represents among all samples associated with the same portHistControlEntry. This index starts at 1 and increases by one as each new sample is taken.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.2`
portHistCurrentIntervalStart The value of sysUpTime at the start of the interval over which this sample was measured.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.3`
portHistCurrentInOctets The total number of octets received on the interface, including framing characters.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.4`
portHistCurrentInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.5`
portHistCurrentInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.6`
portHistCurrentInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.7`
portHistCurrentInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.8`
portHistCurrentInErrors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of in…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.9`
portHistCurrentInUnknownProtos For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protoc…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.10`
portHistCurrentOutOctets The total number of octets transmitted out of the interface, including framing characters.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.11`
portHistCurrentOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.12`
portHistCurrentOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.13`
portHistCurrentOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.14`
portHistCurrentOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.15`
portHistCurrentOutErrors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.16`
portHistCurrentInUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32 Constraints: `range: 0-10000`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.17`
portHistCurrentOutUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32 Constraints: `range: 0-10000`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.2.1.18`

portHistPreviousTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.8.3 · 1 row entry · 18 columns

Open in standard view

A list of Ethernet history entries.

portHistPreviousEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.8.3.1

Indexes

portHistPreviousIndex portHistPreviousSampleIndex

Column	Syntax	OID
portHistPreviousIndex The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of portHistControlIndex.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.1`
portHistPreviousSampleIndex An index that uniquely identifies the particular sample this entry represents among all samples associated with the same portHistControlEntry. This index starts at 1 and increases by one as each new sample is taken.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.2`
portHistPreviousIntervalStart The value of sysUpTime at the start of the interval over which this sample was measured.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.3`
portHistPreviousInOctets The total number of octets received on the interface, including framing characters.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.4`
portHistPreviousInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.5`
portHistPreviousInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.6`
portHistPreviousInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.7`
portHistPreviousInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.8`
portHistPreviousInErrors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of in…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.9`
portHistPreviousInUnknownProtos For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protoc…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.10`
portHistPreviousOutOctets The total number of octets transmitted out of the interface, including framing characters.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.11`
portHistPreviousOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.12`
portHistPreviousOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.13`
portHistPreviousOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.14`
portHistPreviousOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.15`
portHistPreviousOutErrors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.16`
portHistPreviousInUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32 Constraints: `range: 0-10000`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.17`
portHistPreviousOutUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32 Constraints: `range: 0-10000`	`.1.3.6.1.4.1.259.10.1.46.1.2.8.3.1.18`

portMediaInfoTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.10 · 1 row entry · 11 columns

Open in standard view

This table lists the information of the media device
(SFP/XFP/Copper) installed in the physical port.
Only the ifIndices of Ethernet ports those are associated
with the operational cards will be included in this table.

portMediaInfoEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.10.1

An entry in the Interface Media Information table.
The ifIndices of ethernet interfaces will be used
to index this table.

Indexes

portMediaInfoIfIndex

Column	Syntax	OID
portMediaInfoIfIndex ifindex.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.1`
portMediaInfoConnectorType The connector type.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.2`
portMediaInfoFiberType The fiber type.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.3`
portMediaInfoEthComplianceCodes The ethernet compliance codes.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.4`
portMediaInfoBaudRate The baud rate.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.5`
portMediaInfoVendorOUI The OUI of the vendor.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.6`
portMediaInfoVendorName The media vendor name, full name of the corporation.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.7`
portMediaInfoPartNumber The media vendor part number.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.8`
portMediaInfoRevision The media vendor product version number.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.9`
portMediaInfoSerialNumber The vendor serial number of the media device.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.10`
portMediaInfoDateCode The date code of the media device.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.2.10.1.11`

portOpticalMonitoringInfoTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.11 · 1 row entry · 6 columns

Open in standard view

This table lists the instrumented parameters of all
optical interfaces.

portOpticalMonitoringInfoEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.11.1

Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table.

Indexes

portOpticalMonitoringInfoIfIndex

Column	Syntax	OID
portOpticalMonitoringInfoIfIndex ifindex.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.2.11.1.1`
portOpticalMonitoringInfoTemperature This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius). If the device supports ALARM WARNING TRAP…	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.46.1.2.11.1.2`
portOpticalMonitoringInfoVcc This object holds the value of the Vcc. It is measured in V. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.46.1.2.11.1.3`
portOpticalMonitoringInfoTxBiasCurrent Tx Bias Current. It is measured in mA. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.46.1.2.11.1.4`
portOpticalMonitoringInfoTxPower This object holds the value of the transmitter optical signal power for the interface, measured in dBm. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or…	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.46.1.2.11.1.5`
portOpticalMonitoringInfoRxPower This object holds the value of the receiver optical signal power for the interface, measured in dBm. If the device support ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or hig…	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.46.1.2.11.1.6`

portTransceiverThresholdInfoTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.12 · 1 row entry · 22 columns

Open in standard view

This table lists the threshold of transceivers.

portTransceiverThresholdInfoEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.12.1

Identify the index of the transceiver

Indexes

portTransceiverThresholdInfoIfIndex

Column Syntax OID

portTransceiverThresholdInfoIfIndex

ifindex.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.1

portTransceiverThresholdInfoTemperatureLowAlarm

This object holds the low alarm threshold of
the transmitter laser diode temperature for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.2

portTransceiverThresholdInfoTemperatureLowWarn

This object holds the low warning threshold of
the transmitter laser diode temperature for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.3

portTransceiverThresholdInfoTemperatureHighWarn

This object holds the high warning threshold of
the transmitter laser diode temperature for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.4

portTransceiverThresholdInfoTemperatureHighAlarm

This object holds the high alarm threshold of
the transmitter laser diode temperature for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.5

portTransceiverThresholdInfoVccLowAlarm

This object holds the low alarm threshold
of the Vcc.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.6

portTransceiverThresholdInfoVccLowWarn

This object holds the low warning threshold
of the Vcc.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.7

portTransceiverThresholdInfoVccHighWarn

This object holds the high warning threshold
of the Vcc.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.8

portTransceiverThresholdInfoVccHighAlarm

This object holds the high alarm threshold
of the Vcc.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.9

portTransceiverThresholdInfoTxBiasCurrentLowAlarm

low alarm threshold of Tx Bias Current.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.10

portTransceiverThresholdInfoTxBiasCurrentLowWarn

low warning threshold of Tx Bias Current.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.11

portTransceiverThresholdInfoTxBiasCurrentHighWarn

high warning threshold of Tx Bias Current.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.12

portTransceiverThresholdInfoTxBiasCurrentHighAlarm

high alarm threshold of Tx Bias Current.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.13

portTransceiverThresholdInfoTxPowerLowAlarm

This object holds the low alarm threshold
of the transmitter optical signal power
for theinterface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.14

portTransceiverThresholdInfoTxPowerLowWarn

This object holds the low warning threshold
of the transmitter optical signal power
for the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.15

portTransceiverThresholdInfoTxPowerHighWarn

This object holds the high warning threshold
of the transmitter optical signal power
for the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.16

portTransceiverThresholdInfoTxPowerHighAlarm

This object holds the high alarm threshold
of the transmitter optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.17

portTransceiverThresholdInfoRxPowerLowAlarm

This object holds the low alarm threshold
of the receiver optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.18

portTransceiverThresholdInfoRxPowerLowWarn

This object holds the low warning threshold
of the receiver optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.19

portTransceiverThresholdInfoRxPowerHighWarn

This object holds the high warning threshold
of the receiver optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.20

portTransceiverThresholdInfoRxPowerHighAlarm

This object holds the high alarm threshold
of the receiver optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.21

portTransceiverThresholdAutoMode

Indicate the transceiver threshold is retrieved from
EEPROM or configured by user.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.2.12.1.22

powerSavingTable

table

.1.3.6.1.4.1.259.10.1.46.1.2.14 · 1 row entry · 2 columns

Open in standard view

Table for power saving configuration.

powerSavingEntry entry .1.3.6.1.4.1.259.10.1.46.1.2.14.1

An entry describing the configuration and status for
power saving.

Indexes

powerSavingIfIndex

Column Syntax OID

powerSavingIfIndex

The port interface of the powerSavingTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.2.14.1.1

powerSavingStatus

Power saving enabled status.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.2.14.1.2

trunkTable

table

.1.3.6.1.4.1.259.10.1.46.1.3.3 · 1 row entry · 4 columns

Open in standard view

Table describing the configuration and status of each
trunk.

trunkEntry entry .1.3.6.1.4.1.259.10.1.46.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column Syntax OID

trunkIndex

Identifies the trunk within the switch that is
described by the table entry.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.3.3.1.1

trunkPorts

The complete set of ports currently associated with
this trunk.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.3.3.1.2

trunkCreation

A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.259.10.1.46.1.3.3.1.3

trunkStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.3.3.1.4

lacpPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.4.1 · 1 row entry · 2 columns

Open in standard view

Table for LACP port configuration.

lacpPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column Syntax OID

lacpPortIndex

The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.4.1.1.1

lacpPortStatus

Whether 802.3ad LACP is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.4.1.1.2

staPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.5.2 · 1 row entry · 16 columns

Open in standard view

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

staPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column Syntax OID

staPortProtocolMigration

When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.3

staPortOperEdgePort

The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.5

staPortAdminPointToPoint

The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…

Enumerationr/w

Enumerated Values:

0	forceTrue
1	forceFalse
2	auto

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.6

staPortOperPointToPoint

The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-de…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.7

staPortSystemStatus

Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.9

staPortLongAdminPathCost

The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This obje…

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.10

staPortLongOperPathCost

The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This objec…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.11

staPortBpduFlooding

This parameter is used to configure the capability of BPDUs
flooding.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.12

staPortBpduGuard

A value of enabled(1) indicates that BPDU port guard feature
is enabled for each port. A value of disabled(2) indicates
that the feature is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.15

staPortAdminEdgePortWithAuto

The administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this port should be assumed as a non-edge-port a…

Enumerationr/w

Enumerated Values:

1	true
2	false
3	auto

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.16

staPortBpduFilter

The administrative value of the BPDU filter parameter.
A value of enabled(1) indicates that this port will avoid
transmitting BPDUs on edge-port and the value of disabled(2)
indicates that this port will not avoid trans…

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.17

staPortRootGuardStatus

Specifies the desired status of the root guard. This variable
configures the root guard feature to enforce the root bridge
placement in the network.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.18

staPortBpduGuardAutoRecovery

A value of enabled(1) indicates that BPDU port guard auto
recovery mechanism is enabled for this port. A value of
disabled(2) indicates that the mechanism is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.19

staPortBpduGuardAutoRecoveryInterval

The interval in seconds used by BPDU guard auto recovery
mechanism.

Unsigned32r/w

Constraints:
range: 30-86400

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.20

staPortTcPropStop

Stop topology change progate on this ifindex.
Don't enable on potentially ring port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.21

staPortRestrictedTcn

When enabled, received topology change notifications or topology
changes are not propagated to other ports.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.2.1.22

xstInstanceCfgTable

table

.1.3.6.1.4.1.259.10.1.46.1.5.6.4 · 1 row entry · 16 columns

Open in standard view

This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

xstInstanceCfgEntry entry .1.3.6.1.4.1.259.10.1.46.1.5.6.4.1

A conceptual row containing the property of the RST or MST instance.

Indexes

xstInstanceCfgIndex

Column Syntax OID

xstInstanceCfgIndex

An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.1

xstInstanceCfgPriority

The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.

Integer32r/w

Constraints:
range: 0-61440

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.2

xstInstanceCfgTimeSinceTopologyChange

The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.3

xstInstanceCfgTopChanges

The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.4

xstInstanceCfgDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identi…

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.5

xstInstanceCfgRootCost

The cost of the path to the root as seen from
this bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.6

xstInstanceCfgRootPort

The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.7

xstInstanceCfgMaxAge

The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is t…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.8

xstInstanceCfgHelloTime

The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.9

xstInstanceCfgHoldTime

This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.10

xstInstanceCfgForwardDelay

For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the por…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.11

xstInstanceCfgBridgeMaxAge

For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the val…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.12

xstInstanceCfgBridgeHelloTime

For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.13

xstInstanceCfgBridgeForwardDelay

For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.14

xstInstanceCfgTxHoldCount

For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.15

xstInstanceCfgPathCostMethod

For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.

When the value o…

StaPathCostMode

Textual Convention: StaPathCostMode Enumeration

Type Values:

1	short
2	long

.1.3.6.1.4.1.259.10.1.46.1.5.6.4.1.16

xstInstancePortTable

table

.1.3.6.1.4.1.259.10.1.46.1.5.6.5 · 1 row entry · 11 columns

Open in standard view

The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration.

xstInstancePortEntry entry .1.3.6.1.4.1.259.10.1.46.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstanceCfgIndex BRIDGE-MIBdot1dStpPort

Column Syntax OID

xstInstancePortPriority

Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active lin…

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.3

xstInstancePortState

The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
…

Enumeration

Enumerated Values:

1	discarding
2	learning
3	forwarding

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.4

xstInstancePortEnable

The enabled/disabled status of the port.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.5

xstInstancePortDesignatedRoot

The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.7

xstInstancePortDesignatedCost

The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.8

xstInstancePortDesignatedBridge

The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.9

xstInstancePortDesignatedPort

The port identifier of the port on the designated
bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.10

xstInstancePortForwardTransitions

The number of times this port has transitioned
from the learning state to the forwarding state.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.11

xstInstancePortPortRole

The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port …

Enumeration

Enumerated Values:

1	disabled
2	root
3	designated
4	alternate
5	backup
6	master

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.12

xstInstancePortAdminPathCost

The admin value of the MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster med…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.13

xstInstancePortOperPathCost

The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attache…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.10.1.46.1.5.6.5.1.14

mstInstanceEditTable

table

.1.3.6.1.4.1.259.10.1.46.1.5.6.6 · 1 row entry · 6 columns

Open in standard view

The Multiple Spanning Tree region instance vlan configuration table.
Please read the actual instance vlan mapped in the mstInstanceOperTable.

mstInstanceEditEntry entry .1.3.6.1.4.1.259.10.1.46.1.5.6.6.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceEditIndex

Column	Syntax	OID
mstInstanceEditIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.6.1.1`
mstInstanceEditVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.6.1.2`
mstInstanceEditVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.6.1.3`
mstInstanceEditVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.6.1.4`
mstInstanceEditVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.6.1.5`
mstInstanceEditRemainingHops The remaining hop count for this MST instance.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.6.1.6`

mstInstanceOperTable

table

.1.3.6.1.4.1.259.10.1.46.1.5.6.7 · 1 row entry · 5 columns

Open in standard view

The Multiple Spanning Tree region instance vlan mapped table.

mstInstanceOperEntry entry .1.3.6.1.4.1.259.10.1.46.1.5.6.7.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceOperIndex

Column	Syntax	OID
mstInstanceOperIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.7.1.1`
mstInstanceOperVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.7.1.2`
mstInstanceOperVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.7.1.3`
mstInstanceOperVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.7.1.4`
mstInstanceOperVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.46.1.5.6.7.1.5`

staLoopbackDetectionPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.5.8 · 1 row entry · 6 columns

Open in standard view

A table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk

staLoopbackDetectionPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.5.8.1

A conceptual row of staLoopbackDetectionPortTable.

Indexes

staLoopbackDetectionPortIfIndex

Column Syntax OID

staLoopbackDetectionPortIfIndex

The port and the trunk interfaces of the portTable. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.5.8.1.1

staLoopbackDetectionPortStatus

Status of the port on whether spanning tree loopback detection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.8.1.2

staLoopbackDetectionPortTrapStatus

The parameter indicates whether the trap has
to be sent when the loopback BPDUs have been detected.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.5.8.1.3

staLoopbackDetectionPortReleaseMode

Setting it to auto(1) indicates that this port can be released
from discarding state automatically after loopback has occurred.
Setting it to manual(2) indicates that this port can be released
from discarding state manu…

Enumerationr/w

Enumerated Values:

1	auto
2	manual

.1.3.6.1.4.1.259.10.1.46.1.5.8.1.4

staLoopbackDetectionPortRelease

Set this to release(2) to release the port from discarding state.
noRelease(1) will always be obtained when reading this variable.

Enumerationr/w

Enumerated Values:

1	noRelease
2	release

.1.3.6.1.4.1.259.10.1.46.1.5.8.1.5

staLoopbackDetectionPortShutdownInterval

Set the interval used when loopback detection action is
shutdown.

Integer32r/w

Constraints:
range: 60-86400

.1.3.6.1.4.1.259.10.1.46.1.5.8.1.7

mirrorTable

table

.1.3.6.1.4.1.259.10.1.46.1.8.1 · 1 row entry · 4 columns

Open in standard view

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry entry .1.3.6.1.4.1.259.10.1.46.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column Syntax OID

mirrorDestinationPort

The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.8.1.1.1

mirrorSourcePort

The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.8.1.1.2

mirrorType

If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.259.10.1.46.1.8.1.1.3

mirrorStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.8.1.1.4

rspanTable

table

.1.3.6.1.4.1.259.10.1.46.1.8.3 · 1 row entry · 10 columns

Open in standard view

A table that contains the settings of RSPAN.

rspanEntry entry .1.3.6.1.4.1.259.10.1.46.1.8.3.1

The conceptual row of rspanTable.

Indexes

rspanSessionId

Column Syntax OID

rspanSessionId

The session ID that may specify an entry in the table which
contains destination port(s) information.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.1

rspanSrcTxPorts

Specifies the source port list in tx mode.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.2

rspanSrcRxPorts

Specifies the source port list in rx mode.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.3

rspanDstPort

The port number of a destination port. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.4

rspanDstPortTag

Specifies the traffic which is sent out from source port
with RSPAN VLAN ID or not.

Enumerationr/w

Enumerated Values:

1	none
2	untagged
3	tagged

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.5

rspanSwitchRole

Specifies the role of current switch.

Enumerationr/w

Enumerated Values:

1	none
2	source
3	intermediate
4	destination

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.6

rspanRemotePorts

Specifies the uplink port list.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.7

rspanRemoteVlanId

Specifies the ID of a RSPAN VLAN.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.8

rspanOperStatus

The operational status of the entry. A status of up(1)
means the setting of a session is complete and it has
started performing its function. A status of down(2) means
no function is performed because of incompleted ses…

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.9

rspanStatus

Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.8.3.1.10

igmpSnoopRouterCurrentTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.8 · 1 row entry · 3 columns

Open in standard view

Table for current router ports.

igmpSnoopRouterCurrentEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.9.8.1.1`
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.9.8.1.2`
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.9.8.1.3`

igmpSnoopRouterStaticTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.9 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

igmpSnoopRouterStaticEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column Syntax OID

igmpSnoopRouterStaticVlanIndex

The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRou…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.9.1.1

igmpSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.9.9.1.2

igmpSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.9.9.1.3

igmpSnoopMulticastStaticTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.11 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column Syntax OID

igmpSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.11.1.1

igmpSnoopMulticastStaticIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.9.11.1.2

igmpSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.9.11.1.3

igmpSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.9.11.1.4

igmpSnoopCurrentVlanTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.14 · 1 row entry · 13 columns

Open in standard view

Table for enabling or disabling IGMP snooping per VLAN.

igmpSnoopCurrentVlanEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.14.1

Entry for enabling or disabling IGMP snooping.

Indexes

igmpSnoopCurrentVlanIndex

Column Syntax OID

igmpSnoopCurrentVlanIndex

Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.1

igmpSnoopCurrentVlanStatus

Parameter to enable or disable IGMP snooping on this VLAN.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.2

igmpSnoopCurrentVlanImmediateLeave

The parameter to enable or disable the Immediate-Leave feature on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.3

igmpSnoopCurrentVlanGeneralQuerySuppression

The parameter to enable or disable the general query suppresion
on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.4

igmpSnoopCurrentVlanLastMemQueryCount

Represents the number of queries sent by the switch before
it assumes there are no local members.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.5

igmpSnoopCurrentVlanLastMemQueryIntvl

The last member query interval is the max response time
inserted into group-specific queries sent in response to
leave group messages,and is also the the max response time
inserted into group-and-source-specific query m…

Unsigned32r/w

Constraints:
range: 1-31744

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.6

igmpSnoopCurrentVlanProxyAddress

Represents the address of queries sent by the switch.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.7

igmpSnoopCurrentVlanQueryIntvl

Represents the query interval of queries sent by the switch.

Unsigned32r/w

Constraints:
range: 2-31744

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.8

igmpSnoopCurrentVlanQueryRespIntvl

Represents the query response interval of queries
sent by the switch.

Unsigned32r/w

Constraints:
range: 10-31740

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.9

igmpSnoopCurrentVlanProxyReporting

Set this variable to enabled(1) to enable the feature.
Set this variable to disabled(2) to disable the feature.
Set this variable to default(3), the status of the feature
is decided by the global configuration.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	default

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.10

igmpSnoopCurrentVlanVersion

the version of igmp packets is supported by this vlan.

Unsigned32r/w

Constraints:
range: 1-3

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.11

igmpSnoopCurrentVlanVersionExclusive

Enable/disable control of the IGMP Snooping exclusive
supported version.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.12

igmpSnoopCurrentVlanImmediateLeaveByHostIp

The parameter to enable or disable the Immediate-Leave feature by host ip on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.9.14.1.14

igmpSnoopMulticastGroupTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.15 · 1 row entry · 6 columns

Open in standard view

Table for current multicast addresses.

igmpSnoopMulticastGroupEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.15.1

Entry for Group multicast addresses.

Indexes

igmpSnoopMulticastGroupVlanIndex igmpSnoopMulticastGroupIpAddress igmpSnoopMulticastGroupSourceIPAddress

Column	Syntax	OID
igmpSnoopMulticastGroupVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul…	Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex `Unsigned32`	`.1.3.6.1.4.1.259.10.1.46.1.9.15.1.1`
igmpSnoopMulticastGroupIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.46.1.9.15.1.2`
igmpSnoopMulticastGroupSourceIPAddress Source IP address of source.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.46.1.9.15.1.3`
igmpSnoopMulticastGroupPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.9.15.1.4`
igmpSnoopMulticastGroupStatus The set of ports which are static IGMP member ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.9.15.1.5`
igmpSnoopMulticastGroupPortCount The number of forwarding port in this group	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.9.15.1.6`

igmpSnoopProfileTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.18 · 1 row entry · 3 columns

Open in standard view

The table for configuring the IGMP snooping profile.

igmpSnoopProfileEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.18.1

The entry for configuring the IGMP snooping profile.

Indexes

igmpSnoopProfileId

Column Syntax OID

igmpSnoopProfileId

The ID of the IGMP snooping profile.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.18.1.1

igmpSnoopProfileAction

The access mode of the IGMP snooping profile.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.46.1.9.18.1.2

igmpSnoopProfileStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.9.18.1.3

igmpSnoopProfileRangeTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.20 · 1 row entry · 5 columns

Open in standard view

The table for configuring the range of the IGMP snooping
profile.

igmpSnoopProfileRangeEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.20.1

The entry for configuring the range of the IGMP snooping
profile.

Indexes

igmpSnoopProfileRangeProfileId igmpSnoopProfileRangeInetAddressType igmpSnoopProfileRangeStartInetAddress

Column Syntax OID

igmpSnoopProfileRangeProfileId

This is defined as igmpSnoopProfileId.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.20.1.1

igmpSnoopProfileRangeInetAddressType

The address type is associated with this agent.
Only ipv4(1) type is supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.9.20.1.2

igmpSnoopProfileRangeStartInetAddress

The specified addresses in the start of the controlled
IP multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.9.20.1.3

igmpSnoopProfileRangeEndInetAddress

The specified addresses in the end of the controlled
IP multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.9.20.1.4

igmpSnoopProfileRangeAction

The access mode of the IGMP snooping profile.

Enumeration

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.46.1.9.20.1.5

igmpSnoopFilterPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.21 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in IGMP filtering.

igmpSnoopFilterPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.21.1

Entry for port configuration in IGMP filtering.

Indexes

igmpSnoopFilterPortIndex

Column	Syntax	OID
igmpSnoopFilterPortIndex The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.9.21.1.1`
igmpSnoopFilterPortProfileId The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTab…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.9.21.1.2`

igmpSnoopThrottlePortTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.22 · 1 row entry · 5 columns

Open in standard view

Table for port configuration in IGMP throttling.

igmpSnoopThrottlePortEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.22.1

Entry for port configuration in IGMP throttling.

Indexes

igmpSnoopThrottlePortIndex

Column Syntax OID

igmpSnoopThrottlePortIndex

The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.22.1.1

igmpSnoopThrottlePortRunningStatus

Describes the running status of the IGMP throttling to the switch.
A value of true(1) indicates the IGMP throttling mechanism is active.
A value of false(2) indicates the IGMP throttling mechanism is inactive.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.9.22.1.2

igmpSnoopThrottlePortAction

The action mode of the IGMP throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to th…

Enumerationr/w

Enumerated Values:

1	replace
2	deny

.1.3.6.1.4.1.259.10.1.46.1.9.22.1.3

igmpSnoopThrottlePortMaxGroups

The maximum number of IGMP groups that the interface can join.

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.259.10.1.46.1.9.22.1.4

igmpSnoopThrottlePortCurrentGroups

The current number of IGMP groups that the interface has joined.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.9.22.1.5

igmpSnoopPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.27 · 1 row entry · 16 columns

Open in standard view

Table of IGMP Snooping service per port.

igmpSnoopPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.27.1

Entry of IGMP Snooping service per port.

Indexes

igmpSnoopPortIndex

Column Syntax OID

igmpSnoopPortIndex

The port and the trunk (excluding trunk members)
interface of the igmpSnoopPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the …

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.1

igmpSnoopQueryDrop

Parameter to enable or disable dropping IGMP Query packet.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.3

igmpSnoopMulticastDataDrop

Parameter to enable or disable dropping IP multicast data

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.4

igmpSnoopPortNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.5

igmpSnoopPortNumJoinSend

Number of join send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.6

igmpSnoopPortNumJoins

Number of join recieved

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.7

igmpSnoopPortNumJoinSuccess

Number of join group success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.8

igmpSnoopPortNumLeavesSend

Number of leave send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.9

igmpSnoopPortNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.10

igmpSnoopPortNumGeneralQuerySend

Number of general query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.11

igmpSnoopPortNumGeneralQueryRecevied

Number of general query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.12

igmpSnoopPortNumSepcificQuerySend

Number of specific query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.13

igmpSnoopPortNumSpecificQueryReceived

Number of specific query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.14

igmpSnoopPortNumInvalidReport

Number of invalid report received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.15

igmpSnoopPortClearStatistics

Clear this VLAN all statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.16

igmpSnoopAuthentication

Parameter to enable or disable IGMP Authentication

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.259.10.1.46.1.9.27.1.17

igmpSnoopQueryDropTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.30 · 1 row entry · 2 columns

Open in standard view

Table of IGMP Snooping query drop per vlan and per vlan configuration.

igmpSnoopQueryDropEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.30.1

Entry of IGMP Snooping service per port and per VLAN.

Indexes

igmpSnoopQueryDropPortIndex

Column	Syntax	OID
igmpSnoopQueryDropPortIndex The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the …	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.9.30.1.1`
igmpSnoopQueryDropVlanBitmap The VLAN bitmap which query drop applied on this port. If all zero, it means disable, For all VLAN, please use igmpSnoopPortTable to configure.	OctetStringr/w Constraints: `range: 512-512`	`.1.3.6.1.4.1.259.10.1.46.1.9.30.1.2`

igmpSnoopVlanTable

table

.1.3.6.1.4.1.259.10.1.46.1.9.33 · 1 row entry · 13 columns

Open in standard view

Table of IGMP Snooping service per port.

igmpSnoopVlanEntry entry .1.3.6.1.4.1.259.10.1.46.1.9.33.1

Entry of IGMP Snooping service per VLAN.

Indexes

igmpSnoopVlanIndex

Column Syntax OID

igmpSnoopVlanIndex

VLAN ID

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.1

igmpSnoopVlanNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.2

igmpSnoopVlanNumJoinSend

Number of join send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.3

igmpSnoopVlanNumJoins

Number of join received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.4

igmpSnoopVlanNumJoinSuccess

Number of jion success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.5

igmpSnoopVlanNumLeavesSend

Number of leave send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.6

igmpSnoopVlanNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.7

igmpSnoopVlanNumGeneralQuerySend

Number of general query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.8

igmpSnoopVlanNumGeneralQueryRecevied

Number of general query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.9

igmpSnoopVlanNumSepcificQuerySend

Number of specific query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.10

igmpSnoopVlanNumSpecificQueryReceived

Number of sepcific query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.11

igmpSnoopVlanNumInvalidReport

Number of invalid report received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.12

igmpSnoopVlanClearStatistics

Clear this VLAN statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.9.33.1.13

netConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.1 · 1 row entry · 6 columns

Open in standard view

A table of netConfigEntry.

netConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.1.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

netConfigIfIndex netConfigIPAddress netConfigSubnetMask

Column Syntax OID

netConfigIfIndex

The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.

Integer32

Constraints:
range: 1001-5097

.1.3.6.1.4.1.259.10.1.46.1.10.1.1.1

netConfigIPAddress

The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.10.1.1.2

netConfigSubnetMask

The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure o…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.10.1.1.3

netConfigPrimaryInterface

Whether this is a primary interface.

Enumerationr/w

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.259.10.1.46.1.10.1.1.4

netConfigUnnumbered

Whether this is an unnumbered interface.

Enumeration

Enumerated Values:

1	unnumbered
2	notUnnumbered

.1.3.6.1.4.1.259.10.1.46.1.10.1.1.5

netConfigStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.10.1.1.6

dhcpcInterfaceTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.1.1.1 · 1 row entry · 3 columns

Open in standard view

Table for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g. for the management VLAN), or
may have many entries(e.g. for all ports, or for all
static VLANs).

dhcpcInterfaceEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.1.1.1.1

Entry for DHCP client information listed by interface.

Indexes

dhcpcIfIndex

Column Syntax OID

dhcpcIfIndex

This is defined by ifIndex in the IF-MIB.(static vlan if index)

Integer32

Constraints:
range: 1-4093

.1.3.6.1.4.1.259.10.1.46.1.10.11.1.1.1.1.1

dhcpcIfVendorClassIdMode

Whether the vendor class ID is in text mode or in
Hex mode.

Enumerationr/w

Enumerated Values:

1	notSpecify
2	text
3	hex

.1.3.6.1.4.1.259.10.1.46.1.10.11.1.1.1.1.4

dhcpcIfVendorClassId

The value that the DHCP client sets in the vendor
class_id option of DHCPDISCOVER and DHCPREQUEST messages.
This value may be used by DHCP servers to identify vendor
classof the client.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.10.11.1.1.1.1.5

dhcpRelayServerInetAddrTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.2.4 · 1 row entry · 4 columns

Open in standard view

The role of DHCP Relay Agent is to forward requests and replies
between server and client when they are not in the same subnet. To
enable DHCP Relay service user needs to specify Relay Server IP
address and then restart DHCP Relay. This Table is to specify Relay
Server IP address,the maximum numbers of server IP address user can
specify is 5.To Restart DHCP Relay, please use the dhcpRelayRestart
variable.

dhcpRelayServerInetAddrEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.2.4.1

A conceptual row of dhcpRelayServerAddrTable.

Indexes

dhcpRelayServerInetAddrIfIndex dhcpRelayServerInetAddrIndex

Column Syntax OID

dhcpRelayServerInetAddrIfIndex

The VLAN interface being used by this table entry.

Integer32

Constraints:
range: 1-4093

.1.3.6.1.4.1.259.10.1.46.1.10.11.2.4.1.1

dhcpRelayServerInetAddrIndex

The Index of the Relay server IP address.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.10.11.2.4.1.2

dhcpRelayServerInetAddressType

The INET address type of the relay server.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.2.4.1.3

dhcpRelayServerInetAddress

The INET address of the relay server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.2.4.1.4

dhcpPoolInetTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9 · 1 row entry · 9 columns

Open in standard view

A DHCP pool is a collection of user configuration such as option
config-lease time or DNS-server IPs, a network address for network
pool, or a host IP plus a hardware address pair for host pool.
However, a DHCP pool only can either be a network pool or a host pool,
or none of them (such as that pool only containing option config no
network address config or a host IP config as well).

dhcpPoolInetEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1

A conceptual row of dhcpPoolInetTable.

Indexes

dhcpPoolInetPoolName

Column Syntax OID

dhcpPoolInetPoolName

Pool name, simply specify a string with its length NO MORE THAN 32.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.1

dhcpPoolInetPoolType

Pool type: notSpecified(1), network(2), host(3).

Enumerationr/w

Enumerated Values:

1	notSpecified
2	network
3	host

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.2

dhcpPoolInetAddressType

Pool address type

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.3

dhcpPoolInetAddress

Pool address

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.4

dhcpPoolInetSubnetMaskType

subnet mask type

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.5

dhcpPoolInetSubnetMask

subnet mask

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.6

dhcpPoolInetHardwareType

Hardware type: notSpecified(1), ethernet(2), ieee802(3) ,fddi(4).

Enumerationr/w

Enumerated Values:

1	notSpecified
2	ethernet
3	ieee802
4	fddi

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.7

dhcpPoolInetMacAddress

MAC address.

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.8

dhcpPoolInetStatus

Setting this to valid(1) creates an entry. Setting this to invalid(2)
destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.9.1.9

dhcpPoolInetOptionTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10 · 1 row entry · 9 columns

Open in standard view

This is the Option table of the dhcpPoolTable, user can specify
options configuration in this table.

dhcpPoolInetOptionEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1

A conceptual row of dhcpPoolOptionTable.

Indexes

dhcpPoolInetOptionPoolName

Column Syntax OID

dhcpPoolInetOptionPoolName

Pool name, simply specify a string with its length NO MORE THAN 32.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.1

dhcpPoolInetOptionNextServerAddrType

Specifies the INET address type of the next server in the
boot process.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.2

dhcpPoolInetOptionNextServerAddr

Specifies the INET address of the next server in the boot process,
which is typically a Trivial File Transfer Protocol(TFTP) server. One
INET address is required.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.3

dhcpPoolInetOptionNetbiosNodeType

Specifies the NetBIOS node type. Valid types are:
none(1)
b-node(2) - Broadcast
p-node(3) - Peer-to-peer
m-node(4) - Mixed
h-node(5) - Hybrid.

Enumerationr/w

Enumerated Values:

1	none
2	b-node
3	p-node
4	m-node
5	h-node

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.4

dhcpPoolInetOptionDomainName

Specifies the domain name string.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.5

dhcpPoolInetOptionBootFile

To specify the name of the default boot image.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.6

dhcpPoolInetOptionLeaseTime

To configure the duration of the lease,
in seconds, of an
IP address that is assigned from a DHCP Server
to a DHCP client. Valid values are from 1 to
31536000 (365 days), and a large number
'7FFFFFFF'h, which is 'practi…

secondsInteger32r/w

Constraints:
range: 1-31536000
range: 2147483647-2147483647

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.7

dhcpPoolInetOptionCidMode

Set this variable to text(2) or hex(3) to specify the mode of the
client ID, which is useful for CLI to determine the display format of
the client ID.

The original value of object is set to 'notSpecified(…

Enumerationr/w

Enumerated Values:

1	notSpecified
2	text
3	hex

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.8

dhcpPoolInetOptionCidBuffer

Content of Client Id.

dhcpPoolOptionCidMode MUST be specified before setting this variable.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.10.1.9

dhcpPoolInetOptionDnsSerTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.11 · 1 row entry · 4 columns

Open in standard view

To specify the DNS IP servers available to a DHCP client, you can
specify up to two addresses for each DHCP pool.

dhcpPoolInetOptionDnsSerEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.3.11.1

A conceptual row of dhcpPoolOptionDnsSerTable.

Indexes

dhcpPoolInetOptionDnsSerPoolName dhcpPoolInetOptionDnsSerIndex

Column Syntax OID

dhcpPoolInetOptionDnsSerPoolName

Pool name, simply specify a string with its length NO MORE THAN 32.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.11.1.1

dhcpPoolInetOptionDnsSerIndex

Index of the DNS server.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.11.1.2

dhcpPoolInetOptionDnsSerAddrType

INET address type of the DNS server.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.11.1.3

dhcpPoolInetOptionDnsSerAddr

INET address of the DNS server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.11.1.4

dhcpPoolOptInetDefaultRouterTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.12 · 1 row entry · 4 columns

Open in standard view

Specifies the default router list for a DHCP Client, you can specify
up to two addresses for each DHCP pool.

dhcpPoolOptInetDefaultRouterEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.3.12.1

A conceptual row of dhcpPoolOptDefaultRouterTable.

Indexes

dhcpPoolOptInetDefaultRouterPoolName dhcpPoolOptInetDefaultRouterIndex

Column Syntax OID

dhcpPoolOptInetDefaultRouterPoolName

Pool name, simply specify a string with its length NO MORE THAN 32.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.12.1.1

dhcpPoolOptInetDefaultRouterIndex

Index of the default router.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.12.1.2

dhcpPoolOptInetDefaultRouterAddrType

Specifies the INET address type of a router.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.12.1.3

dhcpPoolOptInetDefaultRouterAddr

Specifies the INET address of a router.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.12.1.4

dhcpPoolOptInetNetbiosServerTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.13 · 1 row entry · 4 columns

Open in standard view

To configure the NetBIOS WINS name servers that are available to DHCP
clients. You can specify up to eight addressed for each DHCP pool.

dhcpPoolOptInetNetbiosServerEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.3.13.1

A conceptual row of dhcpPoolOptNetbiosServerTable.

Indexes

dhcpPoolOptInetNetbiosServerPoolName dhcpPoolOptInetNetbiosServerIndex

Column Syntax OID

dhcpPoolOptInetNetbiosServerPoolName

Pool name, simply specify a string with its length NO MORE THAN 32

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.13.1.1

dhcpPoolOptInetNetbiosServerIndex

Index of the NetBIOS name Server.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.13.1.2

dhcpPoolOptInetNetbiosServerAddrType

Specifies the INET address type of the NetBIOS WINS name server.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.13.1.3

dhcpPoolOptInetNetbiosServerAddr

Specifies the INET address of the NetBIOS WINS name server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.13.1.4

dhcpServerExcludedInetAddrTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.14 · 1 row entry · 5 columns

Open in standard view

To specify IP addresses that a DHCP Server
should not assign to DHCP clients.

dhcpServerExcludedInetAddrEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.3.14.1

A conceptual row of dhcpServerExcludedIpAddrTable.

Indexes

dhcpServerExcludedInetAddrLowAddrType dhcpServerExcludedInetAddrLowAddr dhcpServerExcludedInetAddrHighAddrType dhcpServerExcludedInetAddrHighAddr

Column Syntax OID

dhcpServerExcludedInetAddrLowAddrType

The excluded INET address type, or first INET address type in an
excluded address range.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.14.1.1

dhcpServerExcludedInetAddrLowAddr

The excluded INET address, or first INET address in an excluded
address range.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.14.1.2

dhcpServerExcludedInetAddrHighAddrType

The last INET address type in the excluded address range.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.14.1.3

dhcpServerExcludedInetAddrHighAddr

The last INET address in the excluded address range.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.14.1.4

dhcpServerExcludedInetAddrStatus

Setting this to valid(1) creates an entry. Setting this to invalid(2)
destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.14.1.5

dhcpServerInetLeaseBindingTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.15 · 1 row entry · 6 columns

Open in standard view

To configure the address bindings on the DHCP server.

dhcpServerInetLeaseBindingEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.3.15.1

A conceptual row of dhcpServerLeaseBindingTable.

Indexes

dhcpServerInetLeaseBindingAddrType dhcpServerInetLeaseBindingAddr

Column Syntax OID

dhcpServerInetLeaseBindingAddrType

The INET address type of the host as recorded on the DHCP server.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.15.1.1

dhcpServerInetLeaseBindingAddr

The INET address of the host as recorded on the DHCP server.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.15.1.2

dhcpServerInetLeaseBindingMac

The MAC address of the host as recorded on the DHCP Server.

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.15.1.3

dhcpServerInetLeaseBindingLeaseTime

The lease expiration date of the INET address of the host.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.15.1.4

dhcpServerInetLeaseBindingStartTime

Show current system real time in sec.

OctetString

Constraints:
range: 20-20

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.15.1.5

dhcpServerInetLeaseBindingStatus

Setting this to valid(1) creates an entry. Setting this to invalid(2)
destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.15.1.6

dhcpPoolOptInetVendorSpecInfoTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.16 · 1 row entry · 5 columns

Open in standard view

To configure the option 43 Vendor Specific Information for DHCP
clients. You can specify option type for each DHCP pool.

dhcpPoolOptInetVendorSpecInfoEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.3.16.1

A conceptual row of dhcpPoolOptInetVendorSpecInfoTable.

Indexes

dhcpPoolOptInetVendorSpecInfoPoolName dhcpPoolOptInetVendorSpecInfoIndex

Column Syntax OID

dhcpPoolOptInetVendorSpecInfoPoolName

Pool name, simply specify a string with its length NO MORE THAN 32

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.16.1.1

dhcpPoolOptInetVendorSpecInfoIndex

Index of the Vendor Specific Information.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.16.1.2

dhcpPoolOptInetVendorSpecInfoMode

Specify the mode of the Vendor Specific Information,
ascii(2) or hex(3) MUST be specified the content in dhcpPoolOptInetVendorSpecInfoBuffer,
ip-address(4) MUST be specified the content in dhcpPoolOptInetVendorSpecInfoA…

Enumerationr/w

Enumerated Values:

1	notSpecified
2	ascii
3	hex
4	ip-address

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.16.1.3

dhcpPoolOptInetVendorSpecInfoBuffer

Content of option 43 Vendor Specific Information.
dhcpPoolOptInetVendorSpecInfoMode MUST be specified before setting this variable.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.16.1.4

dhcpPoolOptInetVendorSpecInfoAddr

Specifies the INET address of the option 43 Vendor Specific Information.
dhcpPoolOptInetVendorSpecInfoMode MUST be specified before setting this variable.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.10.11.3.16.1.5

dhcpOption82RelayServerAddrTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.4.6 · 1 row entry · 2 columns

Open in standard view

This table is to specify relay server IP address,
the maximum number of server IP addresses user can specify is 5.

dhcpOption82RelayServerAddrEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.4.6.1

A conceptual row of dhcpOption82RelayServerAddrTable.

Indexes

dhcpOption82RelayServerAddrIndex

Column	Syntax	OID
dhcpOption82RelayServerAddrIndex The index of the relay server IP address.	Integer32 Constraints: `range: 1-5`	`.1.3.6.1.4.1.259.10.1.46.1.10.11.4.6.1.1`
dhcpOption82RelayServerAddrServerIp The IP address of the relay server.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.46.1.10.11.4.6.1.2`

dhcpOption82VlanConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.4.7 · 1 row entry · 2 columns

Open in standard view

A table contains DHCP option82 configurations 
for existing VLANs.

dhcpOption82VlanConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.4.7.1

An instance contains the configuration to enable
or disable DHCP option82 for each existing VLAN.

Indexes

dhcpOption82VlanIndex

Column Syntax OID

dhcpOption82VlanIndex

This object indicates the VLAN ID on which DHCP Option82
feature is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.10.11.4.7.1.1

dhcpOption82VlanStatus

This object indicates whether DHCP Option82 is enabled in
this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.10.11.4.7.1.2

dhcpOption82PortConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.11.4.8 · 1 row entry · 2 columns

Open in standard view

A table contains DHCP option82 configurations 
for port interfaces.

dhcpOption82PortConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.11.4.8.1

An instance contains the configuration to enable
or disable DHCP option82 at each port interface.

Indexes

dhcpOption82PortIfIndex

Column Syntax OID

dhcpOption82PortIfIndex

The ifIndex value of the port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.10.11.4.8.1.1

dhcpOption82PortStatus

This object indicates whether the port is enabled
for DHCP Option82.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.10.11.4.8.1.2

pingHistoryTable

table

.1.3.6.1.4.1.259.10.1.46.1.10.15.10 · 1 row entry · 2 columns

Open in standard view

Contains the executive result information for the ping
operation.

pingHistoryEntry entry .1.3.6.1.4.1.259.10.1.46.1.10.15.10.1

A conceptual row in the pingHistory table.

Indexes

pingHistoryIndex

Column	Syntax	OID
pingHistoryIndex A new entry in this table is created when the result of a ping probe is determined. The old entries will be cleared when a new ping action is started.	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.259.10.1.46.1.10.15.10.1.1`
pingHistoryResponse This variable represents the round trip time and is measured in milliseconds. The variable is the difference between received time and sent time for a ping probe. If the difference value is more than the time-out value …	millisecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.10.15.10.1.2`

vlanTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.1 · 1 row entry · 2 columns

Open in standard view

Table for VLAN configuration.

vlanEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column Syntax OID

vlanIndex

Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.12.1.1.1

vlanAddressMethod

Method to get the IP address.

Enumerationr/w

Enumerated Values:

1	user
2	bootp
3	dhcp

.1.3.6.1.4.1.259.10.1.46.1.12.1.1.2

vlanPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.2 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in VLAN.

vlanPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column Syntax OID

vlanPortIndex

The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRIDG…

Integer32

Constraints:
range: 1-40

.1.3.6.1.4.1.259.10.1.46.1.12.2.1.1

vlanPortMode

This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link.

Enumerationr/w

Enumerated Values:

1	hybrid
2	dot1qTrunk
3	access

.1.3.6.1.4.1.259.10.1.46.1.12.2.1.2

voiceVlanOuiTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.6.1 · 1 row entry · 4 columns

Open in standard view

A table containing the mac address which can be identified
by Voice VLAN.

voiceVlanOuiEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.6.1.1

A table containing the mac address which can be identified
by Voice VLAN.

Indexes

voiceVlanOuiAddress

Column Syntax OID

voiceVlanOuiAddress

MAC address can be identified by voice vlan.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.12.6.1.1.1

voiceVlanOuiMask

The mask of MAC address.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.12.6.1.1.2

voiceVlanOuiDescription

The description of OUI.

OctetStringr/w

Constraints:
range: 0-30

.1.3.6.1.4.1.259.10.1.46.1.12.6.1.1.3

voiceVlanOuiStatus

Current operation status of the row.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.12.6.1.1.4

voiceVlanPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.6.7 · 1 row entry · 7 columns

Open in standard view

A list of voice VLAN port entries.

voiceVlanPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.6.7.1

An entry containing Voice VLAN port information,
which is applicable to a Voice VLAN enabled interface.

Indexes

voiceVlanPortIfIndex

Column Syntax OID

voiceVlanPortIfIndex

The index of interface on which Voice VLAN function
is enabled.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.259.10.1.46.1.12.6.7.1.1

voiceVlanPortMode

Voice VLAN configuration mode status.

Enumerationr/w

Enumerated Values:

1	auto
2	manual
3	none

.1.3.6.1.4.1.259.10.1.46.1.12.6.7.1.2

voiceVlanPortSecurity

If the security is enabled, the port only allows voice
traffic for the Voice VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.6.7.1.3

voiceVlanPortPriority

The priority of the voice vlan traffic in the port.

Integer32r/w

Constraints:
range: 0-6

.1.3.6.1.4.1.259.10.1.46.1.12.6.7.1.4

voiceVlanPortRuleOui

The address of voice device is learned from
OUI table.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.6.7.1.5

voiceVlanPortRuleLldp

The address of voice device is learned from
LLDP discovery.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.6.7.1.6

voiceVlanPortRemainAge

Remaining aging time, the unit of which is minute.

OctetString

Constraints:
range: 1-12

.1.3.6.1.4.1.259.10.1.46.1.12.6.7.1.7

vlanDot1qTunnelPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.9 · 1 row entry · 4 columns

Open in standard view

Table for port configuration in 802.1Q Tunneling.

vlanDot1qTunnelPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.9.1

Entry for port configuration in 802.1Q Tunneling.

Indexes

vlanDot1qTunnelPortIndex

Column Syntax OID

vlanDot1qTunnelPortIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.12.9.1.1

vlanDot1qTunnelPortMode

This variable sets the 802.1Q Tunneling mode.
Setting it to none(1) indicates no mode in this port.
Setting it to access(2) sets as dot1q-tunnel mode port which link to customer.
Setting it to uplink(3) sets as dot1q-tu…

Enumerationr/w

Enumerated Values:

1	none
2	access
3	uplink

.1.3.6.1.4.1.259.10.1.46.1.12.9.1.2

vlanDot1qTunnelPortEtherType

TPID for 802.1Q encapsulation. It's used to select a nonstandard
(nondefault) 2-byte ethertype to identify 802.1Q tagged frames.

Unsigned32r/w

Constraints:
range: 2048-65535

.1.3.6.1.4.1.259.10.1.46.1.12.9.1.3

vlanDot1qTunnelPortPriorityMapStatus

Status of priority mapping. Set to enabled(1) to use 802.1p
priority of inner tag as packet's priority instead of using
outer tag.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.9.1.4

dot1vProtocolExPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.10 · 1 row entry · 1 columns

Open in standard view

A table that contains protocol Vlan priority information.

dot1vProtocolExPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.10.1

A list of protocol VLAN user priority sets for each port.

Indexes

No indexes recorded

Column	Syntax	OID
dot1vProtocolExPortGroupPriority Specifies the priority in the added tag for qualified frames.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.10.1.46.1.12.10.1.1`

macVlanTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.11 · 1 row entry · 5 columns

Open in standard view

A table that contains the settings for MAC-based VLAN.

macVlanEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.11.1

A conceptual row in the macVlanTable.

Indexes

macVlanMacMask macVlanMacAddress

Column Syntax OID

macVlanMacAddress

The MAC address that may specify an entry in the table
which contains MAC-based VLAN information.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.12.11.1.1

macVlanId

Specifies the VLAN ID which the MAC address associates
with.

Q-BRIDGE-MIBVlanIdr/w

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.259.10.1.46.1.12.11.1.2

macVlanPriority

Specifies the priority whcich the MAC address associates
with.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.10.1.46.1.12.11.1.3

macVlanStatus

Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.12.11.1.4

macVlanMacMask

The MAC address mask that may specify an entry in the table
which contains MAC-based VLAN information.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.12.11.1.5

subnetVlanTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.13 · 1 row entry · 5 columns

Open in standard view

A table that contains the settings for IP subnet-based
VLAN.

subnetVlanEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.13.1

A conceptual row in the subnetVlanTable.

Indexes

subnetVlanMask subnetVlanIpAddress

Column Syntax OID

subnetVlanIpAddress

The IPv4 address of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnet…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.12.13.1.1

subnetVlanMask

The netmask of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnetVlanI…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.12.13.1.2

subnetVlanId

Specifies the VLAN ID which the subnet associates with.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.259.10.1.46.1.12.13.1.3

subnetVlanPriority

Specifies the priority whcich the subnet associates with.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.10.1.46.1.12.13.1.4

subnetVlanStatus

Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.12.13.1.5

vlanStaticExtTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.15 · 1 row entry · 1 columns

Open in standard view

The extension table of dot1qVlanStaticTable. This table
enhances the original table with extra
vlanStaticExtRspanStatus to create and destroy RSPAN
VLAN(s).

vlanStaticExtEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.15.1

A conceptual row in the vlanStaticExtTable.

Indexes

No indexes recorded

Column Syntax OID

vlanStaticExtRspanStatus

Displays type of a VLAN is vlan(2) or rspanVlan(3). Set
this to destroy(1) to destroy a RSPAN VLAN. Set this to
rspanVlan(3) to create a RSPAN VLAN. Setting this to
vlan(2) is not allowed.

Enumerationr/w

Enumerated Values:

1	destroy
2	vlan
3	rspanVlan

.1.3.6.1.4.1.259.10.1.46.1.12.15.1.1

vlanL2ProtocolTunnelPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.16 · 1 row entry · 7 columns

Open in standard view

Table for port configuration in Layer 2 Protocol
Tunneling.

vlanL2ProtocolTunnelPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.16.1

Entry for port configuration in Layer 2 Protocol
Tunneling.

Indexes

vlanL2ptPortIndex

Column Syntax OID

vlanL2ptPortIndex

The port and the trunk (excluding trunk members) interface
of the portTable. The interface identified by a particular
value of this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.12.16.1.1

vlanL2ptPortSta

Set enabled(1) to enable Layer 2 protocol tunneling for
spanning-tree protocol. Set disabled(2) to disable Layer 2
protocol tunneling for spanning-tree protocol.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.16.1.2

vlanL2ptPortLldp

Set enabled(1) to enable Layer 2 protocol tunneling for
LLDP. Set disabled(2) to disable Layer 2 protocol
tunneling for LLDP.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.16.1.3

vlanL2ptPortCdp

Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco Discovery Protocol. Set disabled(2) to disable
Layer 2 protocol tunneling for Cisco Discovery Protocol.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.16.1.4

vlanL2ptPortVtp

Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco VTP. Set disabled(2) to disable Layer 2 protocol
tunneling for Cisco VTP.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.16.1.5

vlanL2ptPortPvst

Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco PVST+. Set disabled(2) to disable Layer 2 protocol
tunneling for Cisco PVST+.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.16.1.6

vlanL2ptPortLacp

Set enabled(1) to enable Layer 2 protocol tunneling for
LACP. Set disabled(2) to disable Layer 2 protocol
tunneling for LACP.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.12.16.1.7

vlanStaticTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.17 · 1 row entry · 2 columns

Open in standard view

Table for static VLAN configuration including VLAN aggregation support.

vlanStaticEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.17.1

Static information for a VLAN configured on the device by (local or
network) management.

Indexes

vlanStaticIndex

Column Syntax OID

vlanStaticIndex

The VLAN ID of the VLAN.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.12.17.1.1

vlanStaticInterfaceType

The interface type of the VLAN (there is a subtype of IANAifType).
l2vlan(135) refers to L2 interface and can't accept any L3 related
configuration. l3ipvlan(136) refers to L3 interface and can accept
L3 related configu…

Enumerationr/w

Enumerated Values:

135	l2vlan
136	l3ipvlan

.1.3.6.1.4.1.259.10.1.46.1.12.17.1.2

vlanDot1qTunnelSrvCvidPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.18 · 1 row entry · 5 columns

Open in standard view

Table for port configuration to specify how to insert
outer tag by matching customer VLAN ID.

vlanDot1qTunnelSrvCvidPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.18.1

Entry for port configuration to specify how to insert
outer tag by matching customer VLAN ID.

Indexes

vlanDot1qTunnelSrvCvidPortIndex vlanDot1qTunnelSrvCvidPortCvid

Column Syntax OID

vlanDot1qTunnelSrvCvidPortIndex

The port interface of the vlanDot1qTunnelSrvCvidPortTable.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.12.18.1.1

vlanDot1qTunnelSrvCvidPortCvid

Specifies customer VLAN ID.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.12.18.1.2

vlanDot1qTunnelSrvCvidPortSvid

Specifies service VLAN ID.

Q-BRIDGE-MIBVlanIdr/w

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.259.10.1.46.1.12.18.1.3

vlanDot1qTunnelSrvCvidPortStatus

Set to valid(1) to create an entry.
Set to invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.12.18.1.5

vlanDot1qTunnelSrvCvidPortAction

Sets action of this entry.

Bitsr/w

Enumerated Values:

0	reserved0
1	reserved1
2	assignSvid
3	reserved3
4	removeCtag

.1.3.6.1.4.1.259.10.1.46.1.12.18.1.6

vlanDot1qTunnelSrvDfltPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.22 · 1 row entry · 3 columns

Open in standard view

Table for port configuration to specify the behavior
of default service.

vlanDot1qTunnelSrvDfltPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.22.1

Entry for port configuration to specify the behavior
of default service.

Indexes

vlanDot1qTunnelSrvDfltPortIndex

Column Syntax OID

vlanDot1qTunnelSrvDfltPortIndex

The port interface of the vlanDot1qTunnelSrvDfltPortTable.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.12.22.1.1

vlanDot1qTunnelSrvDfltPortStatus

Set to valid(1) to create an entry.
Set to invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.12.22.1.2

vlanDot1qTunnelSrvDfltPortAction

Sets action of this entry.

Bitsr/w

Enumerated Values:

0	discard
1	reserved1
2	reserved2
3	reserved3
4	reserved4

.1.3.6.1.4.1.259.10.1.46.1.12.22.1.3

vlanDot1qTunnelUntagDiscardPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.12.24 · 1 row entry · 2 columns

Open in standard view

Table for port configuration to specify the behavior
of discarding untagged traffic.

vlanDot1qTunnelUntagDiscardPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.12.24.1

Entry for port configuration to specify the behavior
of discarding untagged traffic.

Indexes

vlanDot1qTunnelUntagDiscardPortIndex

Column Syntax OID

vlanDot1qTunnelUntagDiscardPortIndex

The port interface of the vlanDot1qTunnelUntagDiscardPortTable.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.12.24.1.1

vlanDot1qTunnelUntagDiscardPortStatus

Set to valid(1) to create an entry.
Set to invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.12.24.1.2

prioWrrPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.13.12 · 1 row entry · 4 columns

Open in standard view

Table for per port weighted round robin (WRR).

prioWrrPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.13.12.1

Entry for per port weighted round robin (WRR).

Indexes

prioWrrPortIfIndex prioWrrPortTrafficClass

Column Syntax OID

prioWrrPortIfIndex

The port interface of the prioWrrPortEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.13.12.1.1

prioWrrPortTrafficClass

Traffic class for this entry, as defined in
dot1dTrafficClass in the P-BRIDGE-MIB. The actual
maximum depends on the hardware, and is
equal to dot1dPortNumTrafficClasses-1.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.259.10.1.46.1.13.12.1.2

prioWrrPortWeight

Weight for this entry. Value of the object should be
ignored when prioQueueMode is strictAndWrr(3), and
prioWrrPortStrictStatus is enabled(1).

Integer32r/w

Constraints:
range: 1-127

.1.3.6.1.4.1.259.10.1.46.1.13.12.1.3

prioWrrPortStrictStatus

This object is used when prioSchedModePort is
strictAndWrr(4).

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.13.12.1.4

prioSchedModePortTable

table

.1.3.6.1.4.1.259.10.1.46.1.13.15 · 1 row entry · 2 columns

Open in standard view

Table for per port scheduling mode.

prioSchedModePortEntry entry .1.3.6.1.4.1.259.10.1.46.1.13.15.1

Entry for per port scheduling mode.

Indexes

prioSchedModePortIndex

Column Syntax OID

prioSchedModePortIndex

The port interface of the prioSchedModePortEntry.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.13.15.1.1

prioSchedModePort

The scheduling mode status of ethernet port.
wrr(1),strict(2), strict-wrr(4)

Enumerationr/w

Enumerated Values:

1	wrr
2	strict
4	strict-wrr

.1.3.6.1.4.1.259.10.1.46.1.13.15.1.2

rateLimitPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.1.2 · 1 row entry · 6 columns

Open in standard view

Table for rate limit of each port.

rateLimitPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column Syntax OID

rlPortIndex

The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.1.2.1.1

rlPortInputStatus

Whether input rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.16.1.2.1.6

rlPortOutputStatus

Whether output rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.16.1.2.1.7

rlPortInputLimitInKilo

Value of the input rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.1.2.1.10

rlPortOutputLimitInKilo

Value of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.1.2.1.11

rlPortLimitInKiloResolution

Present the rate's resolution. Its unit is kilobits per
second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.1.2.1.12

prioIfClassificationModeTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.3.2 · 1 row entry · 2 columns

Open in standard view

Table for setting the interface Qos mapping classification mode.

prioIfClassificationModeEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.3.2.1

Entry for setting the interface Qos mapping classification mode.

Indexes

prioIfClassificationModeIf

Column Syntax OID

prioIfClassificationModeIf

The port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.3.2.1.1

prioIfClassificationModeStatus

The Qos mapping classification mode of the interface. cos mode means
that the internal priority is mapped from priority field of packet's
VLAN tag if a VLAN tag exists; IP precedence mode means that the
internal priorit…

Enumerationr/w

Enumerated Values:

0	cos
1	ipPrecedence
2	dscp

.1.3.6.1.4.1.259.10.1.46.1.16.3.2.1.2

prioIngressCosToQueueTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.3.10 · 1 row entry · 4 columns

Open in standard view

Table for cos to queue mapping.

prioIngressCosToQueueEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.3.10.1

Entry for cos to queue mapping.

Indexes

prioIngressCosToQueueIfValue prioIngressCosToQueueCosValue prioIngressCosToQueueCfiValue

Column	Syntax	OID
prioIngressCosToQueueIfValue The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.16.3.10.1.1`
prioIngressCosToQueueCosValue The cos value on VLAN tag of inject packet.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.10.1.46.1.16.3.10.1.2`
prioIngressCosToQueueCfiValue The cfi value on VLAN tag of inject packet.	Integer32 Constraints: `range: 0-1`	`.1.3.6.1.4.1.259.10.1.46.1.16.3.10.1.3`
prioIngressCosToQueueQueueValue The queue value which is mapped from the (cos,cfi) value of QoS label.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.10.1.46.1.16.3.10.1.4`

prioIngressDscpToQueueTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.3.11 · 1 row entry · 3 columns

Open in standard view

Table for dscp to queue mapping.

prioIngressDscpToQueueEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.3.11.1

Entry for dscp to queue mapping.

Indexes

prioIngressDscpToQueueIfValue prioIngressDscpToQueueDscpValue

Column	Syntax	OID
prioIngressDscpToQueueIfValue The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.16.3.11.1.1`
prioIngressDscpToQueueDscpValue The dscp value on VLAN tag of inject packet.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.259.10.1.46.1.16.3.11.1.2`
prioIngressDscpToQueueQueueValue The queue value which is mapped from the dscp value of QoS label.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.10.1.46.1.16.3.11.1.3`

diffServPolicyMapTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.10 · 1 row entry · 5 columns

Open in standard view

Table for policy map.

diffServPolicyMapEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.10.1

Entry for policy map.

Indexes

diffServPolicyMapIndex

Column Syntax OID

diffServPolicyMapIndex

An index that uniquely identifies an entry in this table.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.16.4.10.1.1

diffServPolicyMapName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.16.4.10.1.2

diffServPolicyMapDescription

The description of this entry.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.46.1.16.4.10.1.3

diffServPolicyMapElementIndexList

The octet string containes the diffServPolicyMapElementEntry
indexes. Two octets express one index and it is represented
in network order. This index list indicates the
diffServPolicyMapEntrys which belong to this entry.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.259.10.1.46.1.16.4.10.1.4

diffServPolicyMapStatus

This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:

- 'active', which indi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.10.1.5

diffServPolicyMapElementTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.12 · 1 row entry · 5 columns

Open in standard view

Table for policy map element.

diffServPolicyMapElementEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.12.1

Entry for policy map element.

Indexes

diffServPolicyMapElementIndex

Column Syntax OID

diffServPolicyMapElementIndex

An index that uniquely identifies an entry in this table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.46.1.16.4.12.1.1

diffServPolicyMapElementClassMapIndex

Specifies the class map binding to this entry. The class map
identified by a particular value of this index is associated
with the same diffServClassMapEntry as identified by the same
value of diffServClassMapIndex.

Integer32r/w

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.46.1.16.4.12.1.2

diffServPolicyMapElementMeterIndex

Specifies the meter binding to this entry. The meter
identified by a particular value of this index is associated
with the same diffServMeterEntry as identified by the same
value of diffServMeterIndex. If this value is
…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.12.1.3

diffServPolicyMapElementActionIndex

Specifies the action binding to this entry. The action
identified by a particular value of this index is associated
with the same diffServActionEntry as identified by the same
value of diffServActionIndex.

Integer32r/w

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.46.1.16.4.12.1.4

diffServPolicyMapElementStatus

This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:

The status column has six defined values:

- 'acti…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.12.1.5

diffServClassMapTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.13 · 1 row entry · 7 columns

Open in standard view

Table for class map.

diffServClassMapEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.13.1

Entry for class map.

Indexes

diffServClassMapIndex

Column Syntax OID

diffServClassMapIndex

An index that uniquely identifies an entry in this table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.46.1.16.4.13.1.1

diffServClassMapName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.259.10.1.46.1.16.4.13.1.2

diffServClassMapDescription

The description of this entry.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.46.1.16.4.13.1.3

diffServClassMapMatchType

The map match type of this entry.

Enumerationr/w

Enumerated Values:

1	matchAny
2	matchAll

.1.3.6.1.4.1.259.10.1.46.1.16.4.13.1.4

diffServClassMapElementIndexTypeList

The octet string containes the type of class map element
indexes. Two octets which are represented in network order
express one type of the class map element index in network
order and it maps the index of
diffServClass…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.10.1.46.1.16.4.13.1.5

diffServClassMapElementIndexList

The octet string containes the class map element indexes. Two
octets express one index and it is represented in
network order. This index list indicates the particular
class map elements which belong to this table. The …

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.10.1.46.1.16.4.13.1.6

diffServClassMapStatus

This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:

The status column has six defined values:

- 'active'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.13.1.7

diffServAclTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.15 · 1 row entry · 5 columns

Open in standard view

Table for ACL.

diffServAclEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.15.1

Entry for ACL.

Indexes

diffServAclIndex

Column Syntax OID

diffServAclIndex

An index that uniquely identifies an entry in the ACL
table.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.259.10.1.46.1.16.4.15.1.1

diffServAclName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.16.4.15.1.2

diffServAclType

The type of this entry. When the value of ACL type is
modified, then the ACEs in the diffServAclAceIndexList of
this entry will be auto-removed, and this entry will be auto-
unbound from the diffServPortTable and the
di…

Enumerationr/w

Enumerated Values:

1	mac
2	ipstandard
3	ipextended
4	ipv6standard
5	ipv6extended
6	arp

.1.3.6.1.4.1.259.10.1.46.1.16.4.15.1.3

diffServAclAceIndexList

The octet string containes the ACE indexes. Two octets
express one index and it is represented in network
order. This index list indicates the particular ACEs which
belong to this table. The ACE uses type to indicate th…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.10.1.46.1.16.4.15.1.4

diffServAclStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

- 'active', which indicates that the conceptual row is
availa…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.15.1.5

diffServIpAceTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.17 · 1 row entry · 22 columns

Open in standard view

Table for IP ACE.

diffServIpAceEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.17.1

Entry for IP ACE.

Indexes

diffServIpAceIndex

Column Syntax OID

diffServIpAceIndex

An index that uniquely identifies an entry in the IP ACE
table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.1

diffServIpAceType

The specified IP ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.

Enumerationr/w

Enumerated Values:

1	standard
2	extended

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.2

diffServIpAceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.3

diffServIpAceSourceIpAddr

The specified source IP address. The packet's source address
is AND-ed with the value of IpAceSourceIpAddrBitmask and then
compared against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.4

diffServIpAceSourceIpAddrBitmask

The specified source IP address mask. The packet's source
address is AND-ed with the value of IpAceSourceIpAddr and
then compared against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.5

diffServIpAceDestIpAddr

The specified destination IP address. The packet's
destination address is AND-ed with the value of
diffServIpAceDestIpAddrBitmask and then compared against the
value of this object. This object may not be modified if th…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.6

diffServIpAceDestIpAddrBitmask

The specified destination IP address mask. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.7

diffServIpAceProtocol

The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
of 0 matches every IP packet. The object=256 means 'any'. For
example: 0 is IP, 1 is ICMP, 2 is IGM…

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.8

diffServIpAcePrec

Specifies the IP precedence value to match against. The value
of this object is ignored whenever the value of
diffServIpAcePrec object is 8. This object may not be modified
if the associated diffServIpAceType object is …

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.9

diffServIpAceDscp

Specifies the DSCP value to match against. The value of this
object is ignored whenever the value of diffServIpAcePrec
object is 64. This object may not be modified if the
associated diffServIpAceType object is equal to…

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.11

diffServIpAceSourcePortOp

Indicates how a packet's source TCP/UDP port number is to be
compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number. equal(2), which is used the
diffSe…

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.12

diffServIpAceMinSourcePort

If the diffServIpAceSourcePortOp is range(3), this
indicates the lower bound of the TCP/UDP port number
value range. This object may not be modified if the
associated diffServIpAceType object is equal to
standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.13

diffServIpAceSourcePortBitmask

If the diffServIpAceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinSourcePort. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.15

diffServIpAceDestPortOp

Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which is …

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.16

diffServIpAceMinDestPort

If the diffServIpAceDestPortOp is range(3), this indicates
the lower bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.17

diffServIpAceDestPortBitmask

If the diffServIpAceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinDestPort. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.19

diffServIpAceControlCode

Indicates how the control flags of TCP packets are to be
compared. diffServIpAceControlCode is AND-ed with
diffServIpAceControlCodeBitmask. This object may not be
modified if the associated diffServIpAceType object is
e…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.20

diffServIpAceControlCodeBitmask

Indicates how the control flags of TCP packets are to be
compared. It can be used to check multiple flags of the FIN,
SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4,
PSH=8, ACK=16, URG=32. This object may not…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.21

diffServIpAceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.22

diffServIpAceVidOp

Indicates how a packet's VID is to be compared.

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.26

diffServIpAceVid

If the diffServIpAceVidOp is equal(2), this indicate the
VLAN ID data value.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.27

diffServIpAceVidBitmask

If the diffServIpAceVidOp is equal(2), this indicate the
VLAN ID bitmask value.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.259.10.1.46.1.16.4.17.1.28

diffServMacAceTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.18 · 1 row entry · 19 columns

Open in standard view

Table for MAC ACE.

diffServMacAceEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.18.1

Entry for MAC ACE.

Indexes

diffServMacAceIndex

Column Syntax OID

diffServMacAceIndex

An index that uniquely identifies an entry in the MAC ACE
table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.1

diffServMacAceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.2

diffServMacAcePktformat

Used to check the packet format of the packets. This object
cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	any
2	untagged-Eth2
3	untagged802Dot3
4	tagggedEth2
5	tagged802Dot3

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.3

diffServMacAceSourceMacAddr

Indicates the 48-bit source MAC address. The specified source
MAC of the packet. The packet's source MAC address is AND-ed
with the value of diffServMacAceSourceMacAddrBitmask
and then compared against the value of this…

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.4

diffServMacAceSourceMacAddrBitmask

The specified source MAC address mask.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.5

diffServMacAceDestMacAddr

Indicates the 48-bit destination MAC address. The specified
destination MAC of the packet. The packet's destination MAC
address is AND-ed with the value of
diffServMacAceDestMacAddrBitmask and then compared against
the …

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.6

diffServMacAceDestMacAddrBitmask

The specified destination MAC address mask.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.7

diffServMacAceVidOp

Indicates how a packet's VID is to be compared. This
object cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.8

diffServMacAceMinVid

Indicates the lower bound of the VID value range if the
diffServMacAceVidOp is range(3).

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.9

diffServMacAceVidBitmask

The bit mask of the VID. The default value is 0.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.10

diffServMacAceEtherTypeOp

Indicates how a packet's ether type is to be compared.

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.12

diffServMacAceEtherTypeBitmask

The bit mask of Ether type. The default value is 0.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.13

diffServMacAceMinEtherType

Indicates the lower bound of the ether type value range
if the diffServMacAceEtherTypeOp is range(3).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.14

diffServMacAceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.16

diffServMacAceCosOp

Indicates how a packet's CoS is compared.
If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing, and
diffServMacAceCosBitmask is used as the bitmask of the CoS…

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.17

diffServMacAceCosBitmask

Indicates the bitmask of the CoS value if the object type of
diffServMacAceCosOp is equal(2). The default value is 0.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.18

diffServMacAceMinCos

If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing.
If the object type of diffServMacAceCosOp is range(3),
diffServMacAceMinCos indicates the lower bound of…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.19

diffServMacAceIpPrecedence

Only configurable while ethertype is specified to IPv4
diffServMacAceEtherTypeOp is equal(2)
diffServMacAceMinEtherType is 0x0800
diffServMacAceEtherTypeBitmask is 0xffff
Indicate the IP precedence value, 8 mean ignore.

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.47

diffServMacAceEtherTypeSubType

This object is used to seperate the data protocol under a tunnel
protocol.
Now it is only used while ethertype is configured as following
diffServMacAceEtherTypeOp is equal(2)
diffServMacAceMinEtherType is 0x8864
…

Enumerationr/w

Enumerated Values:

1	any
2	ipv4

.1.3.6.1.4.1.259.10.1.46.1.16.4.18.1.48

diffServActionTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.19 · 1 row entry · 6 columns

Open in standard view

Table for action.

diffServActionEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.19.1

Entry for action.

Indexes

diffServActionIndex

Column Syntax OID

diffServActionIndex

An index that uniquely identifies an entry in the
action table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.46.1.16.4.19.1.1

diffServActionList

The bitmap value used to identify which action
capabilities are enabled on the entry. The
actionPktNewPri and actionPktNewDscp can not be
enabled at the same time on the entry. The
actionRedPktNewDscp and actionRedDrop …

Bitsr/w

Enumerated Values:

0	actionPktNewPri
9	actionPktNewPhb
11	actionPktNewDscp

.1.3.6.1.4.1.259.10.1.46.1.16.4.19.1.2

diffServActionPktNewPri

Specifies the new priority value for the packet when
the action is satisfied. If the actionPktNewPri bit of
the diffServActionList is not enabled, this object can
not be set.

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.10.1.46.1.16.4.19.1.3

diffServActionPktNewPhb

Specifies the inner priority value for the packet when
the action is satisfied. If the actionPktNewPhb bit of
the diffServActionList is not enabled, this object can
not be set.

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.10.1.46.1.16.4.19.1.4

diffServActionStatus

This object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:

The status column has six defined values:

- 'active', whi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.19.1.11

diffServActionPktNewDscp

Specifies the new DSCP value for the packet when
the action is satisfied. If the actionPktNewDscp bit of
the diffServActionList is not enabled, this object
can not be set.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.46.1.16.4.19.1.13

diffServMeterTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.20 · 1 row entry · 4 columns

Open in standard view

Table for meter.

diffServMeterEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.20.1

Entry for meter.

Indexes

diffServActionIndex

Column Syntax OID

diffServMeterIndex

An entry that describes a single set of token bucket
parameters.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.20.1.1

diffServMeterModel

The Metering algorithm associated with the Token Bucket
parameters. The zeroDotZero indicates this is unknown.

Enumerationr/w

Enumerated Values:

0	default
8	rate

.1.3.6.1.4.1.259.10.1.46.1.16.4.20.1.2

diffServMeterRate

The token-bucket rate, in kilobits per second (kbps).

Integer32r/w

Constraints:
range: 16-1000000

.1.3.6.1.4.1.259.10.1.46.1.16.4.20.1.3

diffServMeterStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.20.1.6

diffServIpv6AceTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.21 · 1 row entry · 16 columns

Open in standard view

Table for IPv6 ACE.

diffServIpv6AceEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.21.1

Entry fo IPv6 ACE.

Indexes

diffServIpv6AceIndex

Column Syntax OID

diffServIpv6AceIndex

An index that uniquely identifies an entry in the IPv6 table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.1

diffServIpv6AceType

The specified IP v6 ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.

Enumerationr/w

Enumerated Values:

1	standard
2	extended

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.2

diffServIpv6AceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.3

diffServIpv6AceSourceIpAddr

Specifies the source IPv6 address.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.4

diffServIpv6AceSourceIpAddrPrefixLen

The length (in bits) associated with the source IPv6 address
prefix of this entry.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.5

diffServIpv6AceDestIpAddr

Specifies the destination IPv6 address. This object may not be
modified if the associated diffServIpv6AceType object is equal
to standard(1).

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.6

diffServIpv6AceDestIpAddrPrefixLen

The length (in bits) associated with the destination IPv6
address prefix of this entry. This object may not be modified
if the associated diffServIpv6AceType object is equal to
standard(1).

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.7

diffServIpv6AceNextHeader

Specifies the next header to match against. This object may not
be modified if the associated diffServIpv6AceType object is equal to
standard(1).

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.8

diffServIpv6AceDscp

Specifies the DSCP value to match against. This object may not
be modified if the associated diffServIpv6AceType object is
equal to standard(1).

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.9

diffServIpv6AceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.11

diffServIpv6AceSourcePortOp

Indicates how a packet's source TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the source
TCP/UDP port number. equal(2), which uses the
diff…

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.13

diffServIpv6AceSourcePort

If the diffServIpv6AceSourcePortOp is equal(2), this
indicates the TCP/UDP port number value.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.14

diffServIpv6AceSourcePortBitmask

If the diffServIpv6AceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpv6AceSourcePort.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.15

diffServIpv6AceDestPortOp

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.16

diffServIpv6AceDestPort

If the diffServIpv6AceDestPortOp is equal(2), this
indicates the TCP/UDP port number value.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.17

diffServIpv6AceDestPortBitmask

If the diffServIpv6AceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpv6AceDestPort.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.46.1.16.4.21.1.18

diffServArpAceTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.23 · 1 row entry · 13 columns

Open in standard view

The conceptual table of all of diffServArpAceEntry.

diffServArpAceEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.23.1

The conceptual row for diffServArpAceTable.

Indexes

diffServArpAceIndex

Column Syntax OID

diffServArpAceIndex

The unique index of an ACE within an ACL.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.1

diffServArpAceAction

Indicates the action to be taken if a packet matches
this ACE. This object cannot not be configured when
the status of the entry, diffServArpAceStatus, is
active(1).

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.2

diffServArpAcePktType

Indicates the packet type to be taken if a packet matches
this ACE. This object can not be configured when the
status of the entry, diffServArpAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	request
2	response
3	both

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.3

diffServArpAceSourceIpAddr

The specified source ARP address. The packet's source
address is AND'ed with the value of
diffServArpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the s…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.4

diffServArpAceSourceIpAddrBitmask

The specified source ARP address mask. The packet's
destination address is AND'ed with the value of
diffServArpAceSourceIpAddr and then compared against the
value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.5

diffServArpAceDestIpAddr

The specified destination IP address. The packet's
destination address is AND'ed with the value of
diffServArpAceDestIpAddrBitmask and then compared
against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.6

diffServArpAceDestIpAddrBitmask

The specified destination IP address mask.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.7

diffServArpAceSourceMacAddr

Indicates the 48-bit destination MAC address. The
specified source MAC of the packet. The packet's
source MAC address is AND'ed with the value of
aceArpSourceMacAddrBitmask and then compared against
the value of this ob…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.8

diffServArpAceSourceMacAddrBitmask

The specified source MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.9

diffServArpAceDestMacAddr

Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is AND'ed with the
value of aceArpDestMacAddrBitmask and then compared
against the value of…

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.10

diffServArpAceDestMacAddrBitmask

The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.11

diffServArpAceLogStatus

Indicates whether to log messages against the packets.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.12

diffServArpAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.23.1.13

diffServArpTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.24 · 1 row entry · 1 columns

Open in standard view

The conceptual table of all of diffServArpEntry.

diffServArpEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.24.1

The conceptual row for diffServArpTable.

Indexes

diffServArpAclName

Column	Syntax	OID
diffServArpAclName The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.259.10.1.46.1.16.4.24.1.1`

diffServAclHwCounterTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.26 · 1 row entry · 5 columns

Open in standard view

Table for differentiated services hardware counter on
each port.

diffServAclHwCounterEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.26.1

Entry for differentiated services hardware counter on
each port.

Indexes

diffServAclHwCounterIfIndex diffServAclHwCounterDirection diffServAclHwCounterAclIndex diffServAclHwCounterAceIndex

Column Syntax OID

diffServAclHwCounterIfIndex

This object is the interface index of diffServPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.26.1.1

diffServAclHwCounterDirection

Indicates a particular direction of traffic.

Enumeration

Enumerated Values:

1	ingress
2	egress

.1.3.6.1.4.1.259.10.1.46.1.16.4.26.1.2

diffServAclHwCounterAclIndex

An index that uniquely identifies an entry in the ACL
table.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.46.1.16.4.26.1.3

diffServAclHwCounterAceIndex

An index that uniquely identifies an entry of an ACL.
This entry might be a compressed ACE (which index is
bigger than SYS_ADPT_MAX_NBRS_OF_ACE_OF_SYSTEM) with
multiple user configured ACEs, and the index of
compressed …

Integer32

Constraints:
range: 0-1023

.1.3.6.1.4.1.259.10.1.46.1.16.4.26.1.4

diffServAclHwCounterAceHitCount

Specifies the hardware counter of an ACE entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.16.4.26.1.5

diffServPolicyMapPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.27 · 1 row entry · 4 columns

Open in standard view

Table for policy map of each port.

diffServPolicyMapPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.27.1

Entry for diffServPolicyMapPortTable.

Indexes

diffServPolicyMapPortIfIndex diffServPolicyMapPortDirection

Column Syntax OID

diffServPolicyMapPortIfIndex

This object is the interface index of DiffServPolicyMapPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.27.1.1

diffServPolicyMapPortDirection

Indicates this policy map effect to
which direction of traffic.

Enumeration

Enumerated Values:

1	ingress
2	egress

.1.3.6.1.4.1.259.10.1.46.1.16.4.27.1.2

diffServPolicyMapPortPolicyMapIndex

Specifies the policy map index binded to the interface.
The policy map identified by a particular value of
this index is associated with the same DiffServPolicyMapEntry
as identified by the same value of diffServPolicyM…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.27.1.3

diffServPolicyMapPortStatus

This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:

The status column has six defined values:

- 'active'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.27.1.4

diffServAccessGroupTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.28 · 1 row entry · 7 columns

Open in standard view

Table for specifies access group
for ACL on each port.

diffServAccessGroupEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.28.1

Entry for diffServAccessGroupTable.

Indexes

diffServAccessGroupIfIndex diffServAccessGroupDirection diffServAccessGroupType

Column Syntax OID

diffServAccessGroupIfIndex

This object is the interface index of diffServAccessGroupEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB. If support glo…

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.28.1.1

diffServAccessGroupDirection

Indicates this access group effect to
which direction of traffic.

Enumeration

Enumerated Values:

1	ingress
2	egress

.1.3.6.1.4.1.259.10.1.46.1.16.4.28.1.2

diffServAccessGroupType

Specifies the access group type,
only support bind one ACL per type on a port.

Enumeration

Enumerated Values:

1	mac
2	ip
3	ipv6

.1.3.6.1.4.1.259.10.1.46.1.16.4.28.1.3

diffServAccessGroupAclIndex

Specifies the ACL index apply to this access
group. The index uniquely identifies an
entry in diffServAclTable.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.28.1.4

diffServAccessGroupTimeRangeName

The name of the time range entry bound to
the access group. This object should be
equal to one of the timeRangeName objects
in timeRangeTable.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.16.4.28.1.5

diffServAccessGroupCounterStatus

The acl counter enable status of this
access group.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.16.4.28.1.6

diffServAccessGroupStatus

This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:

The status column has six defined values:

- 'active'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.16.4.28.1.7

diffServTcamTable

table

.1.3.6.1.4.1.259.10.1.46.1.16.4.29 · 1 row entry · 7 columns

Open in standard view

The conceptual table of all of DiffServTcamEntry.

diffServTcamEntry entry .1.3.6.1.4.1.259.10.1.46.1.16.4.29.1

The conceptual row for diffServTcamTable.

Indexes

diffServTcamUnit diffServTcamDevice diffServTcamPool

Column Syntax OID

diffServTcamUnit

This object identifies the switch within the system
for which this entry contains information.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.46.1.16.4.29.1.1

diffServTcamDevice

The device id of the specified unit.

Integer32

Constraints:
range: 0-0

.1.3.6.1.4.1.259.10.1.46.1.16.4.29.1.2

diffServTcamPool

The TCAM pool index of the specified unit and device.

Integer32

Constraints:
range: 0-17

.1.3.6.1.4.1.259.10.1.46.1.16.4.29.1.3

diffServTcamPoolCapability

The bitmap value used to identify which functions
supported on this pool.

Bits

Enumerated Values:

0	macAcl
1	ipAcl
2	ipv6StdAcl
3	ipv6ExtAcl
4	macDiffServ
5	ipDiffServ
6	ipv6StdDiffServ
7	ipv6ExtDiffServ
8	egressMacAcl
9	egressIpAcl
10	egressIpv6StdAcl
11	egressIpv6ExtAcl
12	egressMacDiffServ
13	egressIpDiffServ
14	egressIpv6StdDiffServ
15	egressIpv6ExtDiffServ
16	webAuth
17	ipSourceGuard
18	ipv6SourceGuard
19	cpuInterface
20	rateLimit
21	linkLocal
22	reserved

.1.3.6.1.4.1.259.10.1.46.1.16.4.29.1.4

diffServTcamTotal

The total number of TCAM pool entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.29.1.5

diffServTcamFree

The free number of TCAM pool entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.29.1.6

diffServTcamUsed

The used number of TCAM pool entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.16.4.29.1.7

privateVlanSessionTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.1.8 · 1 row entry · 4 columns

Open in standard view

Contains the settings for private VLAN Session.

privateVlanSessionEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.1.8.1

A conceptual row in the privateVlanSession table.

Indexes

privateVlanSessionId

Column Syntax OID

privateVlanSessionId

The session ID that may specifiy certain entry in the table which contains private
VLAN session information.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.259.10.1.46.1.17.1.8.1.1

privateVlanSessionUplinkPorts

This is the list of uplink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortDownlink of the same session, and they
also should not overlap with the privateVlanSessionPortUplink…

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.17.1.8.1.2

privateVlanSessionDownlinkPorts

This is the list of downlink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortUplink of the same session, and they also
should not overlap with the privateVlanSessionPortUplink…

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.17.1.8.1.3

privateVlanSessionStatus

Set this to valid(1) to create an entry. Sets this to
invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.1.8.1.4

portSecPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.2.1 · 1 row entry · 5 columns

Open in standard view

The port security(MAC binding) Table.

portSecPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.2.1.1

The entry of portSecPortTable.

Indexes

portSecPortIndex

Column Syntax OID

portSecPortIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.2.1.1.1

portSecPortStatus

Set enabled(1) to enable port security and set disabled(2) to
disable port security.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.17.2.1.1.2

portSecAction

The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be s…

Enumerationr/w

Enumerated Values:

1	none
2	trap
3	shutdown
4	trapAndShutdown

.1.3.6.1.4.1.259.10.1.46.1.17.2.1.1.3

portSecMaxMacCount

The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the num…

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.259.10.1.46.1.17.2.1.1.4

portSecStickyMacStatus

Set enabled(1) to start sticky MAC feature for preventing
dynamic secure MAC addresses port move.
Set disabled(2) to stop sticky MAC feature.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.17.2.1.1.8

radiusServerTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.4.7 · 1 row entry · 8 columns

Open in standard view

The table for RADIUS server.

radiusServerEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.4.7.1

The conceptual row for radiusServerTable.

Indexes

radiusServerIndex

Column Syntax OID

radiusServerIndex

The RADIUS server index in the table.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.17.4.7.1.1

radiusServerAddress

IP address of a RADIUS server.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.17.4.7.1.2

radiusServerAuthPortNumber

Authentication port number of RADIUS server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.46.1.17.4.7.1.3

radiusServerAcctPortNumber

Accounting port number of RADIUS server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.46.1.17.4.7.1.4

radiusServerKey

Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.10.1.46.1.17.4.7.1.5

radiusServerRetransmit

Timeout for RADIUS.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.259.10.1.46.1.17.4.7.1.6

radiusServerTimeout

Timeout for RADIUS.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.46.1.17.4.7.1.7

radiusServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.4.7.1.8

tacacsPlusServerTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.5.4 · 1 row entry · 6 columns

Open in standard view

The table for TACACS+ server.

tacacsPlusServerEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.5.4.1

The conceptual row for tacacsPlusServerTable.

Indexes

tacacsPlusServerIndex

Column Syntax OID

tacacsPlusServerIndex

TACACS+ server index.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.46.1.17.5.4.1.1

tacacsPlusServerPortNumber

TCP port number of a TACACS+ server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.46.1.17.5.4.1.3

tacacsPlusServerKey

The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This
variable can only be set. When this variable is read, it always
returns a zero-length string.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.10.1.46.1.17.5.4.1.4

tacacsPlusServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.5.4.1.8

tacacsPlusServerInetAddressType

Type of IP address of a TACACS+ server. Only ipv4(1) and
ipv6(2) types are supported.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.17.5.4.1.11

tacacsPlusServerInetAddress

IP address of a TACACS+ server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.5.4.1.12

sshConnInfoTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.6.6 · 1 row entry · 7 columns

Open in standard view

The table for Secure Shell Connection.

sshConnInfoEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column Syntax OID

sshConnID

The connection ID of the Secure Shell Connection.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.46.1.17.6.6.1.1

sshConnMajorVersion

The SSH major version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.6.6.1.2

sshConnMinorVersion

The SSH minor version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.6.6.1.3

sshConnStatus

The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start Sta…

Enumeration

Enumerated Values:

1	negotiationStart
2	authenticationStart
3	sessionStart

.1.3.6.1.4.1.259.10.1.46.1.17.6.6.1.5

sshConnUserName

The user name of the connection.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.46.1.17.6.6.1.6

sshDisconnect

Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable.

Enumerationr/w

Enumerated Values:

1	noDisconnect
2	disconnect

.1.3.6.1.4.1.259.10.1.46.1.17.6.6.1.7

sshConnEncryptionTypeStr

The encryption type of the SSH.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.46.1.17.6.6.1.8

sshUserTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.6.29 · 1 row entry · 10 columns

Open in standard view

The conceptual table of all of sshUserEntry.

sshUserEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.6.29.1

The conceptual row for sshUserTable.

Indexes

sshUserName

Column Syntax OID

sshUserName

User Name.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.1

sshUserRsaKey1

The RSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.2

sshUserRsaKey2

The RSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.3

sshUserRsaKey3

The RSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.4

sshUserRsaKey4

The RSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.5

sshUserRsaKey5

The RSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.6

sshUserRsaKey6

The RSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.7

sshUserRsaKey7

The RSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.8

sshUserRsaKey8

The RSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.9

sshUserKeyDelAction

To delete the user key.

For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key.

For the get behavior:
You will get delRsaKey(2) when the delete operation is in
progress. Ot…

Enumerationr/w

Enumerated Values:

1	noDel
2	delRsaKey

.1.3.6.1.4.1.259.10.1.46.1.17.6.29.1.18

ipFilterSnmpInetTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.9.12 · 1 row entry · 4 columns

Open in standard view

A list of IP address entries.

ipFilterSnmpInetEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.9.12.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterSnmpInetAddressType ipFilterSnmpInetAddressStart

Column Syntax OID

ipFilterSnmpInetAddressType

The type of IP address filter.
Only supports IPv4 and IPv6 address types.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.17.9.12.1.1

ipFilterSnmpInetAddressStart

The start IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.9.12.1.2

ipFilterSnmpInetAddressEnd

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.9.12.1.3

ipFilterSnmpInetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.9.12.1.4

ipFilterHttpInetTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.9.13 · 1 row entry · 4 columns

Open in standard view

A list of IP address entries.

ipFilterHttpInetEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.9.13.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterHttpInetAddressType ipFilterHttpInetAddressStart

Column Syntax OID

ipFilterHttpInetAddressType

The type of IP address filter .
Only supports IPv4 and IPv6 address types.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.17.9.13.1.1

ipFilterHttpInetAddressStart

The start IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.9.13.1.2

ipFilterHttpInetAddressEnd

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.9.13.1.3

ipFilterHttpInetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.9.13.1.4

ipFilterTelnetInetTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.9.14 · 1 row entry · 4 columns

Open in standard view

A list of IP address entries.

ipFilterTelnetInetEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.9.14.1

This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.

Indexes

ipFilterTelnetInetAddressType ipFilterTelnetInetAddressStart

Column Syntax OID

ipFilterTelnetInetAddressType

The type of IP address filter .
Only supports IPv4 and IPv6 address types.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.17.9.14.1.1

ipFilterTelnetInetAddressStart

The start IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.9.14.1.2

ipFilterTelnetInetAddressEnd

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.9.14.1.3

ipFilterTelnetInetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.9.14.1.4

userAuthTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.10.5 · 1 row entry · 5 columns

Open in standard view

This table is for creating the new user.

userAuthEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.10.5.1

Entries in this table correspond to the users entries in system.

Indexes

userAuthUserName

Column	Syntax	OID
userAuthUserName The name of the user. The user name is starting with alphanumeric.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.259.10.1.46.1.17.10.5.1.1`
userAuthPassword Specifies the user password. zero length input will set the user enrty without password. If the user is not exist, it will create the user with the giving password and privilege 0. The password is starting with alphanum…	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.46.1.17.10.5.1.2`
userAuthPrivilege Specifies the user level. If the user does not exist, it will create the user with the given privilege and no password. Privilege 15 indicates system administrator, privilege 0 indicates guest user.	Integer32r/w Constraints: `range: 0-15`	`.1.3.6.1.4.1.259.10.1.46.1.17.10.5.1.3`
userAuthPublicKey User public key, the value can be 'RSA' or 'None'.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.259.10.1.46.1.17.10.5.1.4`
userAuthStatus This node is used to create the user entry by '1' and to delete one user entry by '0'.	Integer32r/w Constraints: `range: 0-1`	`.1.3.6.1.4.1.259.10.1.46.1.17.10.5.1.5`

dot1xAuthConfigExtTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.11.1 · 1 row entry · 3 columns

Open in standard view

The extension table of dot1xAuthConfigTable.

dot1xAuthConfigExtEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.11.1.1

The entry of dot1xAuthConfigExtTable.

Indexes

No indexes recorded

Column Syntax OID

dot1xAuthConfigExtOperMode

The operation mode of dot1x port which allows host
connection to 802.1x-authorized ports.

Enumerationr/w

Enumerated Values:

1	singleHost
2	multiHost
3	macBasedAuth

.1.3.6.1.4.1.259.10.1.46.1.17.11.1.1.1

dot1xAuthConfigExtMultiHostMaxCnt

The maximum number of hosts when the
dot1xAuthConfigExtOperMode is multiHost(2). When the
operation Mode is singleHost(1), we can ignore this
variables.

Integer32r/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.259.10.1.46.1.17.11.1.1.2

dot1xAuthConfigExtPortIntrusionAction

Responses to intrusion when the authentication is failed;
block-traffic(1) means that to block traffic when the authentication is failed and
guest-vlan(2) means that to join to a guest VLAN when the authentication is fa…

Enumerationr/w

Enumerated Values:

1	block-traffic
2	guest-vlan

.1.3.6.1.4.1.259.10.1.46.1.17.11.1.1.3

aaaMethodTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.12.1 · 1 row entry · 7 columns

Open in standard view

Contains the settings needed for accounting.

aaaMethodEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.12.1.1

A conceptual row in the aaaMethodTable.

Indexes

aaaMethodIndex

Column Syntax OID

aaaMethodIndex

Specifies the index for the entry.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.17.12.1.1.1

aaaMethodName

Name for the method.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.259.10.1.46.1.17.12.1.1.2

aaaMethodGroupName

Name for the server to use, pointing to aaaRadiusGroupName
or aaaTacacsPlusGroupName.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.259.10.1.46.1.17.12.1.1.3

aaaMethodMode

start-stop(1),sends a 'start' accounting notice at the beginning of a process and
a 'stop' accounting notice at the end of a process. The 'start' accounting record
is sent in the background. The requested user process b…

Enumerationr/w

Enumerated Values:

1	start-stop

.1.3.6.1.4.1.259.10.1.46.1.17.12.1.1.4

aaaMethodStatus

Set to 1 to initiate the aaaMethodTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.12.1.1.5

aaaMethodClientType

dot1x(1): Provides accounting service for 802.1x activity;
exec(2): Provides accounting service for EXEC connection
such as Telnet, SSH or console; commands(3): Provides
accounting service for command privileges.

Enumerationr/w

Enumerated Values:

1	dot1x
2	exec
3	commands

.1.3.6.1.4.1.259.10.1.46.1.17.12.1.1.6

aaaMethodPrivilegeLevel

Specifies the privilege level for the entry.
When aaaMethodClientType is in the mode of command(3),
the privilege level is enabled to be accessed.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.46.1.17.12.1.1.7

aaaRadiusGroupTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.12.2 · 1 row entry · 4 columns

Open in standard view

Uses a subset of RADIUS servers for accounting as defined by the server group

aaaRadiusGroupEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.12.2.1

A conceptual row of aaaRadiusGroupEntry.

Indexes

aaaRadiusGroupIndex

Column Syntax OID

aaaRadiusGroupIndex

Specifies the index for the entry.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.17.12.2.1.1

aaaRadiusGroupServerBitMap

Identifies which RADIUS sever to use, each bit points to each radius server.
80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2.

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.46.1.17.12.2.1.2

aaaRadiusGroupName

Uses a subset of servers for accounting as
defined by the server group. The same name as aaaTacasPlusGroupName is not allowed.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.12.2.1.3

aaaRadiusGroupStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.12.2.1.4

aaaTacacsPlusGroupTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.12.3 · 1 row entry · 4 columns

Open in standard view

Uses a subset of TACACS+ servers for accounting as defined by the server group

aaaTacacsPlusGroupEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.12.3.1

A conceptual row of aaaTacacsPlusGroupEntry.

Indexes

aaaTacacsPlusGroupIndex

Column Syntax OID

aaaTacacsPlusGroupIndex

Specifies the index for the entry.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.17.12.3.1.1

aaaTacacsPlusGroupServerBitMap

Identifies which TACACS+ sever to use.

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.46.1.17.12.3.1.2

aaaTacacsPlusGroupName

Uses a subset of servers for accounting as
defined by the server group. We can't have the same name as aaaRadiusGroupName

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.12.3.1.3

aaaTacacsPlusGroupStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.12.3.1.4

aaaAccountTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.12.5 · 1 row entry · 4 columns

Open in standard view

Specifies an interface or a set of interfaces that the
accounting method list will be applied to.

aaaAccountEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.12.5.1

A conceptual row of aaaAccountTable.

Indexes

aaaAccountIfIndex

Column Syntax OID

aaaAccountIfIndex

Defined as the ifIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.12.5.1.1

aaaAccountMethodName

Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.12.5.1.2

aaaAccountProtocol

Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.12.5.1.3

aaaAccountStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.12.5.1.4

aaaCommandPrivilegesTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.12.8 · 1 row entry · 3 columns

Open in standard view

Contains the settings needed for command privileges.

aaaCommandPrivilegesEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.12.8.1

A conceptual row in the aaaCommandPrivilegesTable.

Indexes

aaaCommandPrivilegesLevel aaaCommandPrivilegesInterfaceIndex

Column Syntax OID

aaaCommandPrivilegesLevel

Specifies the privilege level index for the entry.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.46.1.17.12.8.1.1

aaaCommandPrivilegesInterfaceIndex

Specifies the interface index for the entry.

Enumeration

Enumerated Values:

1	console
2	vty

.1.3.6.1.4.1.259.10.1.46.1.17.12.8.1.2

aaaCommandPrivilegesMethodName

Specifies the method name in the lists under
the mode of command privileges.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.259.10.1.46.1.17.12.8.1.3

aaaAccExecTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.12.9 · 1 row entry · 2 columns

Open in standard view

Specifies an interface or a set of interfaces that the
accounting method list will be applied to.

aaaAccExecEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.12.9.1

A conceptual row of aaaAccExecTable.

Indexes

aaaAccExecIndex

Column Syntax OID

aaaAccExecIndex

The method of accessing CLI management.

Enumeration

Enumerated Values:

1	console
2	vty

.1.3.6.1.4.1.259.10.1.46.1.17.12.9.1.1

aaaAccExecMethodName

Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.12.9.1.2

networkAccessPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.13.2 · 1 row entry · 11 columns

Open in standard view

A table contains the information of network access about every port.

networkAccessPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.13.2.1

A conceptual row in the networkAccessPort table.

Indexes

networkAccessPortPortIndex

Column Syntax OID

networkAccessPortPortIndex

The port and the trunk (excluding trunk members) interface of the
portTable. The interface identified by a particular value of this port
index is the same interface identified by the same value of
ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.1

networkAccessPortDynamicVlan

Sets enabled(1) to enable dynamic VLAN assigment and
sets disabled(2) to disable dynamic VLAN assigment.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.2

networkAccessPortMaxMacCount

Specifies the maximum number of authenticated MAC address.

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.3

networkAccessPortMode

Specifies the secure port mode. enabled(1) means that Mac address
authentication is used and disabled(2) means that the authentication is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.4

networkAccessPortMacFilter

Specifies the MAC filter ID, Set this variable to zero to
disable MAC filter.

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.5

networkAccessPortGuestVlan

Specifies the guest VLAN ID. To disable the VLAN, set the value to 0.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.6

networkAccessPortLinkDetectionStatus

Set this object to enabled(1) to enable link detection.
Set this object to disabled(2) to disable link detection.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.7

networkAccessPortLinkDetectionMode

Specifies a detection event for a port. Set this object
to linkUp(1) to detect a link-up event. Set this object
to linkDown(2) to detect a link-down event. Set this
object to linkUpDown(3) to detect both link up and
lin…

Enumerationr/w

Enumerated Values:

1	linkUp
2	linkDown
3	linkUpDown

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.8

networkAccessPortLinkDetectionAciton

Specifies the action to take when a networkAccessPortLinkDetection
event is triggered. Set this object to trap(1) to send a trap
when a networkAccessPortLinkDetection event is triggered.
Set this object to shutDown(2) t…

Enumerationr/w

Enumerated Values:

1	trap
2	shutDown
3	trapAndShutDown

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.9

networkAccessPortDynamicQos

Set this object to enabled(1) to enable Dynamic QoS.
Set this object to disabled(2) to disable Dynamic QoS.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.10

networkAccessPortAging

Set this object to enabled(1) to enable MAC address aging feature.
Set this object to disabled(2) to disable MAC address aging feature.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.17.13.2.1.11

networkAccessMacAddressTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.13.4 · 1 row entry · 6 columns

Open in standard view

Contains the information of network access MAC addresses.

networkAccessMacAddressEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.13.4.1

A conceptual row in the networkAccessMacAddress table.

Indexes

networkAccessMacAddressAddress networkAccessMacAddressPort

Column Syntax OID

networkAccessMacAddressAddress

Specifies the authenticated MAC address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.17.13.4.1.1

networkAccessMacAddressPort

Specifies the port of authenticated MAC address.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.13.4.1.2

networkAccessMacAddressInetAddressType

This object indicates the type of IP address denoted in
networkAccessMacAddressRadiusServerInetAddress type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.17.13.4.1.3

networkAccessMacAddressRadiusServerInetAddress

Displays the IP address of radius server that authenticates
the specified Mac address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.13.4.1.4

networkAccessMacAddressTime

Displays the authentication time of the authenticated MAC address.
The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'.
'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is
preceded by a zer…

OctetString

Constraints:
range: 12-12

.1.3.6.1.4.1.259.10.1.46.1.17.13.4.1.5

networkAccessMacAddressAttribute

Displays the attribute of an authenticated MAC address.
static(1) indicates resauthorized secure MAC address.
dynamic(2) indicates learnt secure MAC address.

Enumeration

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.259.10.1.46.1.17.13.4.1.6

networkAccessMacFilterWithMaskTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.13.6 · 1 row entry · 4 columns

Open in standard view

Contains the settings for MAC filter.

networkAccessMacFilterWithMaskEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.13.6.1

A conceptual row in the networkAccessMacFilterWithMaskTable.

Indexes

networkAccessMacFilterWithMaskID networkAccessMacFilterWithMaskMacAddress networkAccessMacFilterWithMaskMacAddressMask

Column Syntax OID

networkAccessMacFilterWithMaskID

Specifies the MAC filter ID.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.259.10.1.46.1.17.13.6.1.1

networkAccessMacFilterWithMaskMacAddress

Specifies the MAC address to be filtered.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.17.13.6.1.2

networkAccessMacFilterWithMaskMacAddressMask

Specifies the MAC mask to be filtered.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.17.13.6.1.3

networkAccessMacFilterWithMaskStatus

Set this object to valid(1) to create an entry.
Set this object to invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.17.13.6.1.4

macAuthPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.14.2 · 1 row entry · 3 columns

Open in standard view

Contains the settings for mac authentication of each port.

macAuthPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.14.2.1

A conceptual row in the macAuthPort table.

Indexes

macAuthPortIndex

Column Syntax OID

macAuthPortIndex

The port and the trunk (including trunk members) interface of the
port table. The interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.14.2.1.1

macAuthPortMaxMacCount

Specifies the maximum number of authenticated MAC addresses for MAC authentication.

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.259.10.1.46.1.17.14.2.1.2

macAuthPortIntrusionAction

Responses to intrusion when the authentication is failed.
block-traffic(1) : denies network access to an unauthorized client;
pass-traffic(2) : allows unauthorized clients to the access network.

Enumerationr/w

Enumerated Values:

1	block-traffic
2	pass-traffic

.1.3.6.1.4.1.259.10.1.46.1.17.14.2.1.3

webAuthPortConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.15.9 · 1 row entry · 3 columns

Open in standard view

Contains the settings for web authentication of each port.

webAuthPortConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.15.9.1

A conceptual row in the webAuthPortConfigTable.

Indexes

webAuthPortConfigPortIndex

Column Syntax OID

webAuthPortConfigPortIndex

The port number of the port that may specify certain entry in the table which contains web authentication information.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.15.9.1.1

webAuthPortConfigStatus

Sets enabled(1) to enable web authentication feature for each port and
sets disabled(2) to disable web authentication for each port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.17.15.9.1.2

webAuthPortConfigAuthenticatedHostCount

Displays the authenticated host counts for each port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.15.9.1.3

webAuthPortInfoTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.15.10 · 1 row entry · 6 columns

Open in standard view

Contains the information for web authentication of each port.

webAuthPortInfoEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.15.10.1

A conceptual row in the webAuthPortTable.

Indexes

webAuthPortInfoPortIndex webAuthPortInfoPortAuthSuccessIndex

Column Syntax OID

webAuthPortInfoPortIndex

The port number for which this entry contains web authentication information.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.15.10.1.1

webAuthPortInfoPortAuthSuccessIndex

The authentication success number of port for which this entry contains web authentication information.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.46.1.17.15.10.1.2

webAuthPortInfoInetAddressType

This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.17.15.10.1.3

webAuthPortInfoInetAddress

The IP address which may specify the entry containing web authentication information.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.17.15.10.1.4

webAuthPortInfoRemainingSessiontime

The remaining session time for authenticated hosts. During this
period, they may use internet resource. When the session time expires, they
will need to re-authenticate again.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.15.10.1.5

webAuthPortInfoStatus

Displays the web authentication status for each port.
authenticated (1) means the user is authenticated.

Enumeration

Enumerated Values:

1	authenticated

.1.3.6.1.4.1.259.10.1.46.1.17.15.10.1.6

appFilterPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.17.17.1 · 1 row entry · 3 columns

Open in standard view

The application filter Table.

appFilterPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.17.17.1.1

The entry of appFilterPortTable.

Indexes

appFilterPortIndex appFilterProtocolType

Column Syntax OID

appFilterPortIndex

The port interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in
the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.17.17.1.1.1

appFilterProtocolType

The protocol type defines some specific packets which are
supported on this function

Enumeration

Enumerated Values:

1	cdp
2	pvst

.1.3.6.1.4.1.259.10.1.46.1.17.17.1.1.2

appFilterPktStatus

Set discard(1) to discard packet and set default(0) to
transmit packet in default behavior.

Enumerationr/w

Enumerated Values:

0	default
1	discard

.1.3.6.1.4.1.259.10.1.46.1.17.17.1.1.3

arpProxyArpTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.1.4 · 1 row entry · 2 columns

Open in standard view

A list of Proxy ARP status. This table has entries for all static
VLANs.

arpProxyArpEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.1.4.1

An entry in the table, containing information about Proxy ARP
configuration.

Indexes

arpProxyArpIfIndex

Column Syntax OID

arpProxyArpIfIndex

This is defined as a VLAN interface.
A routing interface is a VLAN that binds an IP subnet.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.18.1.4.1.1

arpProxyArpStatus

Enable or disable proxy ARP process on an interface.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.18.1.4.1.2

ripInstabilityPreventingTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.4 · 1 row entry · 2 columns

Open in standard view

A list of RIP instability preventing status.

ripInstabilityPreventingEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.4.1

An entry in the table, containing information
about RIP instability preventing configuration.
The ifIndex index is a VLAN's ifIndex.

Indexes

ripVlanIndex

Column Syntax OID

ripVlanIndex

This is defined as a VLAN interface.
A routing interface is a VLAN and an IP subnet bound to it.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.18.2.4.1.1

ripSplitHorizonStatus

Enable or disable RIP poison reverse on an interface.

Enumerationr/w

Enumerated Values:

1	splitHorizon
2	poisonReverse
3	none

.1.3.6.1.4.1.259.10.1.46.1.18.2.4.1.2

ripNetworkByInetAddrTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.6.1 · 1 row entry · 4 columns

Open in standard view

The RIP network address table.

ripNetworkByInetAddrEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.6.1.1

A conceptual row of the ripNetworkByInetAddrTable.

Indexes

ripNetworkByInetAddrAddressType ripNetworkByInetAddrAddress ripNetworkByInetAddrPfxLen

Column Syntax OID

ripNetworkByInetAddrAddressType

The RIP Network address type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.18.2.6.1.1.1

ripNetworkByInetAddrAddress

The RIP Network address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.18.2.6.1.1.2

ripNetworkByInetAddrPfxLen

Network prefix length.

INET-ADDRESS-MIBInetAddressPrefixLength

Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.10.1.46.1.18.2.6.1.1.3

ripNetworkByInetAddrStatus

Set this variable to create or destroy a RIP network address.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.18.2.6.1.1.4

ripNetworkByIfindexTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.6.2 · 1 row entry · 2 columns

Open in standard view

The RIp network ifindex table.

ripNetworkByIfindexEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.6.2.1

A conceptual row of the ripNetworkByIfindexTable.

Indexes

ripNetworkIfindex

Column Syntax OID

ripNetworkIfindex

This is defined as a layer3 interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.18.2.6.2.1.1

ripNetworkByIfindexStatus

Set this variable to create or destroy a RIP network ifindex table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.18.2.6.2.1.2

ripDistributeListTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.7 · 1 row entry · 5 columns

Open in standard view

The RIP distribute list table. It's used to filter incoming or
outgoing route updates using the access-list or prefix-list.

ripDistributeListEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.7.1

A conceptual row of the ripDistributelistTable.

Indexes

ripDistributeListInterfaceIndex ripDistributeListType

Column Syntax OID

ripDistributeListInterfaceIndex

The index of the interface on which distribute-list is applied, If
index is 0, the filter will be applied to all the interfaces.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.18.2.7.1.1

ripDistributeListType

Type of distribute-list applied: access-list or prefix-list.

Enumeration

Enumerated Values:

1	access-list
2	prefix-list

.1.3.6.1.4.1.259.10.1.46.1.18.2.7.1.2

ripDistributeListIncomingRouteFilterName

Specifies access-list or prefix-list name to filter incoming routing
updates.

OctetStringr/w

Constraints:
range: 1-15

.1.3.6.1.4.1.259.10.1.46.1.18.2.7.1.3

ripDistributeListOutgoingRouteFilterName

Specifies access-list or prefix-list name to filter outgoing routing
updates.

OctetStringr/w

Constraints:
range: 1-15

.1.3.6.1.4.1.259.10.1.46.1.18.2.7.1.4

ripDistributeListStatus

Set this variable to create or destroy a distribute list.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.18.2.7.1.5

ripRedistributeTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.8 · 1 row entry · 3 columns

Open in standard view

The RIP Redistribute table. Config rip redistribute type, metric.

ripRedistributeEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.8.1

A conceptual row of the ripRedistributeTable.

Indexes

ripRedistributeProtocol

Column Syntax OID

ripRedistributeProtocol

Protocol redistributed to Intermediate System:
connected -- redistribute from connected routes;
static -- redistribute from static routes.

Enumeration

Enumerated Values:

1	connected
2	static

.1.3.6.1.4.1.259.10.1.46.1.18.2.8.1.1

ripRedistributeMetric

Metric value to be used in redistributing.

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.10.1.46.1.18.2.8.1.2

ripRedistributeStatus

Set this variable to create or destroy redistribute information.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.18.2.8.1.3

ripNeighborTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.10 · 1 row entry · 3 columns

Open in standard view

The RIP neighbor table.

ripNeighborEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.10.1

A conceptual row of the ripNeighborTable.

Indexes

ripNeighborAddressType ripNeighborAddress

Column Syntax OID

ripNeighborAddressType

The RIP Neighbor address type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.18.2.10.1.1

ripNeighborAddress

The RIP Neighbor address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.18.2.10.1.2

ripNeighborAddressStatus

Set this variable to create or destroy a RIP neighbor address.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.18.2.10.1.3

ripPassiveInterfaceTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.11 · 1 row entry · 2 columns

Open in standard view

A list of RIP passive interface status.

ripPassiveInterfaceEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.11.1

An entry in the table, containing information about RIP passive
interface(s) configuration. The index is a VLAN's ifIndex.

Indexes

ripInterfaceIndex

Column Syntax OID

ripInterfaceIndex

This is defined as a VLAN interface.
A passive VLAN interface will suppress route updates on it.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.18.2.11.1.1

ripPassiveInterfaceStatus

Set this variable to create or destroy a RIP passive interface.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.18.2.11.1.2

ripRouteClearByNetworkTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.13.2 · 1 row entry · 4 columns

Open in standard view

Clear rip route by network address.

ripRouteClearByNetworkEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.13.2.1

Clear rip route by network address.

Indexes

ripRouteClearByNetworkInetAddrType ripRouteClearByNetworkInetAddr ripRouteClearByNetworkPfxLen

Column Syntax OID

ripRouteClearByNetworkInetAddrType

The RIP route network address type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.18.2.13.2.1.1

ripRouteClearByNetworkInetAddr

The RIP route network address.Write this object to clear rip route by
network address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.18.2.13.2.1.2

ripRouteClearByNetworkPfxLen

The RIP route network prefix length.

INET-ADDRESS-MIBInetAddressPrefixLength

Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.10.1.46.1.18.2.13.2.1.3

ripRouteClearByNetworkClearAction

Write this object value 2(clear) to clear rip route by spicified network
address, when read, this always return noClear(1).

Enumerationr/w

Enumerated Values:

1	noClear
2	clear

.1.3.6.1.4.1.259.10.1.46.1.18.2.13.2.1.4

ripDistanceTable

table

.1.3.6.1.4.1.259.10.1.46.1.18.2.15.2 · 1 row entry · 6 columns

Open in standard view

Rip distance table

ripDistanceEntry entry .1.3.6.1.4.1.259.10.1.46.1.18.2.15.2.1

Rip distance entry

Indexes

ripDistanceInetAddrType ripDistanceInetAddr ripDistancePfxLen

Column Syntax OID

ripDistanceInetAddrType

The RIP distace table network address type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.18.2.15.2.1.1

ripDistanceInetAddr

The RIP distance table network address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.18.2.15.2.1.2

ripDistancePfxLen

The RIP distance table network prefix length.

INET-ADDRESS-MIBInetAddressPrefixLength

Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.10.1.46.1.18.2.15.2.1.3

ripDistanceValue

The RIP distance table distance value.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.18.2.15.2.1.4

ripDistanceAlistName

The RIP distance table access list name. If delete the
access list name, set null string

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.46.1.18.2.15.2.1.5

ripDistanceRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.18.2.15.2.1.6

remoteLogServerInetTable

table

.1.3.6.1.4.1.259.10.1.46.1.19.6.7 · 1 row entry · 4 columns

Open in standard view

A table for storing the remote log server list.

remoteLogServerInetEntry entry .1.3.6.1.4.1.259.10.1.46.1.19.6.7.1

A conceptual row for remoteLogServerInetTable.

Indexes

remoteLogServerInetAddressType remoteLogServerInetAddress

Column Syntax OID

remoteLogServerInetAddressType

Indicates the type of address
denoted in remoteLogServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.19.6.7.1.1

remoteLogServerInetAddress

The IP address of the remote log Server.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.19.6.7.1.2

remoteLogServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.19.6.7.1.3

remoteLogServerUdpPort

The UDP port number of the remote log Server

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.46.1.19.6.7.1.4

smtpServerIpTable

table

.1.3.6.1.4.1.259.10.1.46.1.19.7.4 · 1 row entry · 2 columns

Open in standard view

The SMTP server IP table.
The maximum servers to be added is 3.

smtpServerIpEntry entry .1.3.6.1.4.1.259.10.1.46.1.19.7.4.1

A conceptual row of the smtpServerIpTable.

Indexes

smtpServerIp

Column Syntax OID

smtpServerIp

SMTP mail server's IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.19.7.4.1.1

smtpServerIpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.19.7.4.1.2

smtpDestEMailTable

table

.1.3.6.1.4.1.259.10.1.46.1.19.7.5 · 1 row entry · 2 columns

Open in standard view

The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5.

smtpDestEMailEntry entry .1.3.6.1.4.1.259.10.1.46.1.19.7.5.1

A conceptual row of the smtpDestEMailTable.

Indexes

smtpDestEMail

Column Syntax OID

smtpDestEMail

SMTP destination e-mail address.

OctetString

Constraints:
range: 0-41

.1.3.6.1.4.1.259.10.1.46.1.19.7.5.1.1

smtpDestEMailStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.19.7.5.1.2

sntpServerTable

table

.1.3.6.1.4.1.259.10.1.46.1.23.1.4 · 1 row entry · 4 columns

Open in standard view

Table for SNTP servers. IP addresses
must occupy contiguous indexes, starting from 1.
If a removed entry is not the last entry, the table
will be shifted to contiguous indexes automatically.

sntpServerEntry entry .1.3.6.1.4.1.259.10.1.46.1.23.1.4.1

Entry for SNTP servers.

Indexes

sntpServerIndex

Column Syntax OID

sntpServerIndex

The index of a server.

Integer32

Constraints:
range: 1-3

.1.3.6.1.4.1.259.10.1.46.1.23.1.4.1.1

sntpServerInetAddressType

Indicates the type of address
denoted in sntpServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.23.1.4.1.4

sntpServerInetAddress

The IP address of a time server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.23.1.4.1.5

sntpServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.23.1.4.1.6

ntpAuthKeyTable

table

.1.3.6.1.4.1.259.10.1.46.1.23.5.6 · 1 row entry · 3 columns

Open in standard view

Table for NTP Authentication keys

ntpAuthKeyEntry entry .1.3.6.1.4.1.259.10.1.46.1.23.5.6.1

Entry for NTP Authentication keys.

Indexes

ntpAuthKeyId

Column Syntax OID

ntpAuthKeyId

The index of a Authentication key. This table has fixed size.

Integer32

Constraints:
range: 1-65536

.1.3.6.1.4.1.259.10.1.46.1.23.5.6.1.1

ntpAuthKeyWord

The Authentication key word is used to created a key by the MD5
And the max length is 32.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.23.5.6.1.2

ntpAuthKeyStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.23.5.6.1.3

ntpServerInetTable

table

.1.3.6.1.4.1.259.10.1.46.1.23.5.8 · 1 row entry · 5 columns

Open in standard view

Table for NTP servers.

ntpServerInetEntry entry .1.3.6.1.4.1.259.10.1.46.1.23.5.8.1

Entry for NTP servers.

Indexes

ntpServerInetAddressType ntpServerInetAddress

Column Syntax OID

ntpServerInetAddressType

Indicates the type of address denoted in ntpServerInetAddress
type. Only ipv4(1), ipv6(2), and dns(16) types are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.23.5.8.1.1

ntpServerInetAddress

The address of a time server.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.23.5.8.1.2

ntpServerInetVersion

NTP version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.23.5.8.1.3

ntpServerInetKeyId

Key for a NTP server.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.23.5.8.1.4

ntpServerInetStatus

Status of the NTP server. Setting this to valid(1) creates an
entry. Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.23.5.8.1.5

fileInfoTable

table

.1.3.6.1.4.1.259.10.1.46.1.24.2.1 · 1 row entry · 7 columns

Open in standard view

This table contain the information of the file system;
we can also perform the delete, set startup file operation.

fileInfoEntry entry .1.3.6.1.4.1.259.10.1.46.1.24.2.1.1

A conceptually row for fileInfoTable.

Indexes

fileInfoUnitID fileInfoFileName

Column Syntax OID

fileInfoUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.46.1.24.2.1.1.1

fileInfoFileName

The file Name of the file System in the device.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.24.2.1.1.2

fileInfoFileType

The file type of the file System in the device.

Enumeration

Enumerated Values:

1	diag
2	runtime
3	syslog
4	cmdlog
5	config
6	postlog
7	private
8	certificate
9	webarchive

.1.3.6.1.4.1.259.10.1.46.1.24.2.1.1.3

fileInfoIsStartUp

This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.24.2.1.1.4

fileInfoFileSize

The sizes( in bytes) of the file.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.24.2.1.1.5

fileInfoCreationTime

The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-d…

OctetString

Constraints:
range: 20-20

.1.3.6.1.4.1.259.10.1.46.1.24.2.1.1.6

fileInfoDelete

Write this object to delete(2) to delete a file, when
read, this always return noDelete(1).

Enumerationr/w

Enumerated Values:

1	noDelete
2	delete

.1.3.6.1.4.1.259.10.1.46.1.24.2.1.1.7

fileAutoDownloadResultTable

table

.1.3.6.1.4.1.259.10.1.46.1.24.3 · 1 row entry · 3 columns

Open in standard view

This table contains file auto download result information.

fileAutoDownloadResultEntry entry .1.3.6.1.4.1.259.10.1.46.1.24.3.1

A conceptual row for fileAutoDownloadResultTable.

Indexes

fileAutoDownloadResultUnitID

Column Syntax OID

fileAutoDownloadResultUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.46.1.24.3.1.1

fileAutoDownloadResultAction

The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
…

Enumeration

Enumerated Values:

1	notCopying
2	copying

.1.3.6.1.4.1.259.10.1.46.1.24.3.1.2

fileAutoDownloadResultStatus

The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.
The listed values are identical to fileCopyStatus.

Enumeration

Enumerated Values:

1	fileCopyTftpUndefError
2	fileCopyTftpFileNotFound
3	fileCopyTftpAccessViolation
4	fileCopyTftpDiskFull
5	fileCopyTftpIllegalOperation
6	fileCopyTftpUnkownTransferId
7	fileCopyTftpFileExisted
8	fileCopyTftpNoSuchUser
9	fileCopyTftpTimeout
10	fileCopyTftpSendError
11	fileCopyTftpReceiverError
12	fileCopyTftpSocketOpenError
13	fileCopyTftpSocketBindError
14	fileCopyTftpUserCancel
15	fileCopyTftpCompleted
16	fileCopyParaError
17	fileCopyBusy
18	fileCopyUnknown
19	fileCopyReadFileError
20	fileCopySetStartupError
21	fileCopyFileSizeExceed
22	fileCopyMagicWordError
23	fileCopyImageTypeError
24	fileCopyHeaderChecksumError
25	fileCopyImageChecksumError
26	fileCopyWriteFlashFinish
27	fileCopyWriteFlashError
28	fileCopyWriteFlashProgramming
29	fileCopyError
30	fileCopySuccess
31	fileCopyCompleted
41	fileCopyFileNotFound
42	fileCopyServerPermissionDenied
43	fileCopyStorageFull
44	fileCopyConnectError
45	fileCopyServerNotInService
46	fileCopyDataConnectionOpenError
47	fileCopyLogInError
48	fileCopyInvalidFileName
49	fileCopyServerNotAcceptProvidedCiphers
50	fileCopyServerNotSupportFtps
51	fileCopyFileUnavailable
52	fileCopyUnclassifiedError
53	fileCopyTimeout
54	fileCopyProjectIdError
55	fileCopyFileNumExceed
56	fileCopySameVersion

.1.3.6.1.4.1.259.10.1.46.1.24.3.1.3

dnsCacheTable

table

.1.3.6.1.4.1.259.10.1.46.1.26.7 · 1 row entry · 7 columns

Open in standard view

To display the RRs in DNS cache.

dnsCacheEntry entry .1.3.6.1.4.1.259.10.1.46.1.26.7.1

A conceptual row for the dnsCacheTable.

Indexes

dnsCacheIndex

Column Syntax OID

dnsCacheIndex

The entry sequence number.

Integer32

Constraints:
range: 1280-6400

.1.3.6.1.4.1.259.10.1.46.1.26.7.1.1

dnsCacheFlag

Always get 4, means this record is unreliable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.26.7.1.2

dnsCacheType

Cache Type: address(1); cname(2).

Enumeration

Enumerated Values:

1	address
2	cname

.1.3.6.1.4.1.259.10.1.46.1.26.7.1.3

dnsCacheTtl

The DNS cache TTL.

Integer32

Constraints:
range: 0-876000

.1.3.6.1.4.1.259.10.1.46.1.26.7.1.5

dnsCacheDomain

The DNS cache domain.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.26.7.1.6

dnsCacheInetAddressType

Indicates the type of address
denoted in dnsHostAddrInetAddress type.
Only ipv4(1) and ipv6(2) types are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.26.7.1.7

dnsCacheInetAddress

IP address of DNS cache item.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.26.7.1.8

dnsHostTable

table

.1.3.6.1.4.1.259.10.1.46.1.26.8 · 1 row entry · 3 columns

Open in standard view

The conceptual table of dnsHostEntry.
The dnsHostTable and dnsHostAddrTable are used to define
static host name-to-address mapping.

dnsHostEntry entry .1.3.6.1.4.1.259.10.1.46.1.26.8.1

A conceptual row for the dnsHostTable.

Indexes

dnsHostIndex

Column Syntax OID

dnsHostIndex

The entry sequence number.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.259.10.1.46.1.26.8.1.1

dnsHostName

Host name.

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.26.8.1.2

dnsHostStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.26.8.1.3

dnsHostAddrTable

table

.1.3.6.1.4.1.259.10.1.46.1.26.9 · 1 row entry · 3 columns

Open in standard view

The conceptual table of dnsHostAddrEntry.
The dnsHostTable and dnsHostAddrTable are used to define
static host name-to-address mapping.

dnsHostAddrEntry entry .1.3.6.1.4.1.259.10.1.46.1.26.9.1

A conceptual row for the dnsHostAddrTable.

Indexes

dnsHostIndex dnsHostAddrInetAddressType dnsHostAddrInetAddress

Column Syntax OID

dnsHostAddrInetAddressType

Indicates the type of address
denoted in dnsHostAddrInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4) type are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.26.9.1.1

dnsHostAddrInetAddress

Specifies the address of the host.
Adding one address to two different hosts is not allowed.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.26.9.1.2

dnsHostAddrStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.26.9.1.3

dnsDomainListTable

table

.1.3.6.1.4.1.259.10.1.46.1.26.10 · 1 row entry · 3 columns

Open in standard view

This table defines a list of default domain names to complete unqualified host names.

dnsDomainListEntry entry .1.3.6.1.4.1.259.10.1.46.1.26.10.1

A conceptual row for the dnsDomainListTable.

Indexes

dnsDomainListIndex

Column Syntax OID

dnsDomainListIndex

The entry sequence number.

Integer32

Constraints:
range: 1-3

.1.3.6.1.4.1.259.10.1.46.1.26.10.1.1

dnsDomainListName

Domain name.

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.26.10.1.2

dnsDomainListStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.26.10.1.3

dnsNameServerInetTable

table

.1.3.6.1.4.1.259.10.1.46.1.26.11 · 1 row entry · 3 columns

Open in standard view

Specifies the address of one or more name servers to use for
name and address resolution.

dnsNameServerInetEntry entry .1.3.6.1.4.1.259.10.1.46.1.26.11.1

A conceptual row for dnsNameServerInetTable.

Indexes

dnsNameServerInetAddressType dnsNameServerInetAddress

Column Syntax OID

dnsNameServerInetAddressType

Type of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are
supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.26.11.1.1

dnsNameServerInetAddress

IP address of name server.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.26.11.1.2

dnsNameServerInetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.26.11.1.3

pethPseMainExtTable

table

.1.3.6.1.4.1.259.10.1.46.1.28.5 · 1 row entry · 2 columns

Open in standard view

A table of objects that display and control attributes of the main
power source in a PSE device. Ethernet switches are one example of
boxes that would support these objects. Values of all read-write
objects in this table are persistent at restart/reboot.

pethPseMainExtEntry entry .1.3.6.1.4.1.259.10.1.46.1.28.5.1

A set of objects that display and control the Main power of a PSE.

Indexes

No indexes recorded

Column Syntax OID

pethPseMainExtDllPowerType

Indicates whether the local system is a PSE or a PD
and whether it is Type 1 or Type 2.

Enumeration

Enumerated Values:

0	type2Pse
2	type1Pse

.1.3.6.1.4.1.259.10.1.46.1.28.5.1.1

pethPseMainExtDllPowerSource

The power sources of the local system.

Enumeration

Enumerated Values:

0	unknown
1	primary
2	backup

.1.3.6.1.4.1.259.10.1.46.1.28.5.1.2

pethPsePortExtTable

table

.1.3.6.1.4.1.259.10.1.46.1.28.6 · 1 row entry · 6 columns

Open in standard view

A table of objects that display and control the power characteristics
of power Ethernet ports on a Power Source Entity (PSE) device.
This group will be implemented in managed power Ethernet switches and
mid-span devices. Values of all read-write objects in this table are
persistent at restart/reboot.

pethPsePortExtEntry entry .1.3.6.1.4.1.259.10.1.46.1.28.6.1

A set of objects that display and control the power characteristics of
a power Ethernet PSE port.

Indexes

No indexes recorded

Column Syntax OID

pethPsePortExtMirroredDllPdRequestedPowerValue

Returns the PD requested power value received from the remote system.
The definition and encoding of PD requested power value is the same as
described in pethPdPortDllPdRequestedPowerValue.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.28.6.1.4

pethPsePortExtDllPseAllocatedPowerValue

Returns the PSE allocated power value that the local system has
currently allocated to the remote system. The PSE allocated power value
is the maximum input average power that the PSE wants the PD to ever
draw under thi…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.28.6.1.6

pethPsePortTimeRange

The name of the time range entry bound to the port.
This object should be equal to one of the timeRangeName
objects in timeRangeTable. The object works when
pethPsePortAdminEnable is enabled(1).

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.10.1.46.1.28.6.1.11

pethPsePortTimeRangeStatus

If no time range entry is bound to the port, value of this
object is none(0). If PoE time range of the port is active,
value of this object is active(1). If PoE time range of
the port is inactive, value of this object i…

Enumeration

Enumerated Values:

0	none
1	active
2	inactive

.1.3.6.1.4.1.259.10.1.46.1.28.6.1.12

pethPsePortExtMaximumPowerValue

Returns the user-configurable maximum power value that
the local system has currently allocated to the remote system.
The units of this variable is milliwatts.

milliwattsInteger32r/w

Constraints:
range: 3000-34200

.1.3.6.1.4.1.259.10.1.46.1.28.6.1.13

pethPsePortExtUsedPowerValue

Returns the currently used power value that
the local system is delivering to the remote system.
The units of this variable is milliwatts.

milliwattsSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.28.6.1.14

mcastStormTable

table

.1.3.6.1.4.1.259.10.1.46.1.33.1.1 · 1 row entry · 4 columns

Open in standard view

Table to manage the control of multicast storms for ports.

mcastStormEntry entry .1.3.6.1.4.1.259.10.1.46.1.33.1.1.1

The conceptual row of multiStormTable.

Indexes

mcastStormIfIndex

Column Syntax OID

mcastStormIfIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.1.1.1.1

mcastStormStatus

Whether multicast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.1.1.1.2

mcastStormPktRate

Multicast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. The range is 500 to 1488100.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.1.1.1.4

mcastStormPktRateResolution

Present the rate's resolution. Its unit is packets per
second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.1.1.1.8

bcastStormTable

table

.1.3.6.1.4.1.259.10.1.46.1.33.3.1 · 1 row entry · 4 columns

Open in standard view

Table to manage the control of broadcast storms for ports.

bcastStormEntry entry .1.3.6.1.4.1.259.10.1.46.1.33.3.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column Syntax OID

bcastStormIfIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.3.1.1.1

bcastStormStatus

Whether broadcast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.3.1.1.2

bcastStormPktRate

Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. The range is 500 to 1488100.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.3.1.1.4

bcastStormPktRateResolution

Present the rate's resolution. Its unit is packets per
second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.3.1.1.8

unknownUcastStormTable

table

.1.3.6.1.4.1.259.10.1.46.1.33.4.1 · 1 row entry · 4 columns

Open in standard view

Table to manage the unknown unicast storm control.

unknownUcastStormEntry entry .1.3.6.1.4.1.259.10.1.46.1.33.4.1.1

The conceptual row of unknownUcastStormTable.

Indexes

unknownUcastStormIfIndex

Column Syntax OID

unknownUcastStormIfIndex

The port or trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.4.1.1.1

unknownUcastStormStatus

The parameter indicates that the unknown unicast
storm protection is enabled/disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.4.1.1.2

unknownUcastStormPktRate

The parameter indicates the packet rate(packet per second) of the storm protection.
The range is 500 to 1488100.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.4.1.1.4

unknownUcastStormPktRateResolution

Present the rate's resolution. Its unit is packets per
second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.4.1.1.8

atcBcastStormTable

table

.1.3.6.1.4.1.259.10.1.46.1.33.5.3 · 1 row entry · 12 columns

Open in standard view

The table contains the Auto Traffic Control configuration
and the status for broadcast traffic.

atcBcastStormEntry entry .1.3.6.1.4.1.259.10.1.46.1.33.5.3.1

The conceptual row of the table.

Indexes

atcBcastStormIfIndex

Column Syntax OID

atcBcastStormIfIndex

The specified port on which the ATC is applied.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.1

atcBcastStormEnable

The parameter indicates whether the ATC of the broadcast
traffic is applied.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.2

atcBcastStormAutoRelease

The parameter indicates whether the Auto-Release feature
of ATC is applied.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.3

atcBcastStormSampleType

The parameter indicates the unit of traffic rate and threshold.

Enumerationr/w

Enumerated Values:

1	packet-rate
2	octet-rate
3	percent

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.4

atcBcastStormCurrentTrafficRate

The parameter indicates the current broadcast traffic rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.5

atcBcastStormAlarmFireThreshold

The parameter indicates that if the current broadcast traffic rate
exceeds the specified threshold, it will be treated as the storm.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.6

atcBcastStormAlarmClearThreshold

The parameter indicates that if the current broadcast traffic
falls below the specified threshold it will be treated as the
normal traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.7

atcBcastStormTcAction

The parameter indicates the protecting action which
ATC will applied to the specified port.

Enumerationr/w

Enumerated Values:

1	rate-control
2	shutdown

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.8

atcBcastStormAlarmFireTrapStatus

The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.9

atcBcastStormAlarmClearTrapStatus

The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected as
the normal traffic.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.10

atcBcastStormTcApplyTrapStatus

The parameter indicates whether the trap has to be sent when
the ATC is activated.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.11

atcBcastStormTcReleaseTrapStatus

The parameter indicates whether the trap has to be sent when
the ATC is released.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.3.1.12

atcMcastStormTable

table

.1.3.6.1.4.1.259.10.1.46.1.33.5.6 · 1 row entry · 12 columns

Open in standard view

The table contains the Auto Traffic Control configuration
and the status for mulicast traffic.

atcMcastStormEntry entry .1.3.6.1.4.1.259.10.1.46.1.33.5.6.1

The conceptual row of the table.

Indexes

atcMcastStormIfIndex

Column Syntax OID

atcMcastStormIfIndex

The specified port on which the ATC is applied.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.1

atcMcastStormEnable

The parameter indicates whether the ATC of the mulicast
traffic is applied.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.2

atcMcastStormAutoRelease

The parameter indicates whether the Auto-Release feature
of ATC is applied.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.3

atcMcastStormSampleType

The parameter indicates the unit of traffic rate and threshold.

Enumerationr/w

Enumerated Values:

1	packet-rate
2	octet-rate
3	percent

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.4

atcMcastStormCurrentTrafficRate

The parameter indicates the current mulicast traffic rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.5

atcMcastStormAlarmFireThreshold

The parameter indicates that if the current mulicast traffic rate
exceeds the specified threshold, it will be treated as the storm.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.6

atcMcastStormAlarmClearThreshold

The parameter indicates that if the current mulicast traffic
falls below the specified threshold it will be treated as the
normal traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.7

atcMcastStormTcAction

The parameter indicates the protecting action which
ATC will applied to the specified port.

Enumerationr/w

Enumerated Values:

1	rate-control
2	shutdown

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.8

atcMcastStormAlarmFireTrapStatus

The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.9

atcMcastStormAlarmClearTrapStatus

The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected as
the normal traffic.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.10

atcMcastStormTcApplyTrapStatus

The parameter indicates whether the trap has to be sent when
the ATC is activated.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.11

atcMcastStormTcReleaseTrapStatus

The parameter indicates whether the trap has to be sent when
the ATC is released.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.33.5.6.1.12

taskCpuTable

table

.1.3.6.1.4.1.259.10.1.46.1.39.4 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information describing the
CPU utilization of each task.

taskCpuEntry entry .1.3.6.1.4.1.259.10.1.46.1.39.4.1

An entry in the table, describing the CPU utilization of one
task.

Indexes

taskCpuName

Column	Syntax	OID
taskCpuName The name of the task.	OctetString Constraints: `range: 0-15`	`.1.3.6.1.4.1.259.10.1.46.1.39.4.1.1`
taskCpuCurrentUti The current CPU utilization in hundredths of a percent in the past 5 seconds.	Integer32 Constraints: `range: 1-10000`	`.1.3.6.1.4.1.259.10.1.46.1.39.4.1.2`
taskCpuStatMaxUti The maximum CPU utilization in hundredths of a percent in the past 60 seconds.	Integer32 Constraints: `range: 1-10000`	`.1.3.6.1.4.1.259.10.1.46.1.39.4.1.3`
taskCpuStatAvgUti The average CPU utilization in hundredths of a percent in the past 60 seconds.	Integer32 Constraints: `range: 1-10000`	`.1.3.6.1.4.1.259.10.1.46.1.39.4.1.4`

mvrDomainTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.20 · 1 row entry · 6 columns

Open in standard view

The table for configuring the MVR port.

mvrDomainEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.20.1

The entry for configuring the MVR Domain.

Indexes

mvrDomainId

Column Syntax OID

mvrDomainId

Speicfies which MVR domain to configure.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.44.20.1.1

mvrDomainStatus

Parameter to enable or disable MVR(Multicast VLAN
Registration) on the device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.44.20.1.2

mvrDomainRunningStatus

Describes the running status of MVR (Multicast VLAN Registration)
to the switch. A value of active(1) indicates that all necessary
conditions in the MVR environment are satisfied. A value of inactive(2)
indicates that s…

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.259.10.1.46.1.44.20.1.3

mvrDomainVlanId

To set VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB.

Q-BRIDGE-MIBVlanIndexr/w

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.44.20.1.4

mvrDomainUpstreamSourceIp

Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router
through MVR source port.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.44.20.1.5

mvrDomainClearDynamicGroups

Clear dynamic learned groups

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.44.20.1.6

mvrDomainPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.21 · 1 row entry · 6 columns

Open in standard view

The table for configuring the MVR port.

mvrDomainPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.21.1

The entry for configuring the MVR port.

Indexes

mvrPortDomainId mvrDomainIfIndex

Column Syntax OID

mvrPortDomainId

Speicfies which MVR domain to configure.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.44.21.1.1

mvrDomainIfIndex

The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.44.21.1.2

mvrDomainPortType

For configuring the MVR port type. To disable the MVR
port type, use the none(0).

Enumerationr/w

Enumerated Values:

0	none
1	source
2	receiver

.1.3.6.1.4.1.259.10.1.46.1.44.21.1.3

mvrDomainPortImmediateLeave

To enable immediate leave on MVR port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.44.21.1.4

mvrDomainPortActive

To indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2).

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.259.10.1.46.1.44.21.1.5

mvrDomainPortImmediateLeaveByHostIp

To enable immediate leave by host IP on MVR port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.44.21.1.6

mvrProfileCtlTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.22.1 · 1 row entry · 3 columns

Open in standard view

The entry for configuring the MVR profile.

mvrProfileCtlEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.22.1.1

The entry for configuring the MVR profile.

Indexes

mvrProfileCtlId

Column Syntax OID

mvrProfileCtlId

Profile ID to index which MVR profile

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.259.10.1.46.1.44.22.1.1.1

mvrProfileName

MVR Profile name which identify a group range.

NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before
mvrProfileCtlAction really creat the profile.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.46.1.44.22.1.1.2

mvrProfileCtlAction

Set this object to create(2) to create profile. Set this object
to destory(3) to delete profile. When
the action is complete, this object becomes noAction(1).

Enumerationr/w

Enumerated Values:

0	noAction
1	create
2	destory

.1.3.6.1.4.1.259.10.1.46.1.44.22.1.1.5

mvrProfileGroupCtlTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.22.2 · 1 row entry · 5 columns

Open in standard view

The entry for configuring the MVR group ranges for MVR profile.

mvrProfileGroupCtlEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.22.2.1

The entry for configuring the group ranges on MVR profile.

Indexes

mvrProfileGropuCtlProfileId mvrProfileGroupCtlId

Column Syntax OID

mvrProfileGropuCtlProfileId

Profile ID to index which MVR profile

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.259.10.1.46.1.44.22.2.1.1

mvrProfileGroupCtlId

Profile ID to index which group range in MVR profile

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.46.1.44.22.2.1.2

mvrProfileGroupStartIPAddress

MVR Profile range start IP address.

NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profil…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.44.22.2.1.3

mvrProfileGroupEndIPAddress

MVR Profile range end IP address.

NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profile.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.44.22.2.1.4

mvrProfileGroupCtlAction

Set this object to create(2) to create group range. Set this object
to destory(3) to delete group range. When
the action is complete, this object becomes noAction(1).

NOTE: If mvrProfileGroupStartIPAddres…

Enumerationr/w

Enumerated Values:

0	noAction
1	create
2	destory

.1.3.6.1.4.1.259.10.1.46.1.44.22.2.1.5

mvrDomainAssociatedProfileTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.23 · 1 row entry · 3 columns

Open in standard view

Configure MVR domain associate which MVR profile

mvrDomainAssociatedProfileEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.23.1

The entry for configuring MVR domain associate MVR profile.

Indexes

mvrProfileDomainId mvrProfileId

Column Syntax OID

mvrProfileDomainId

Profile ID to index which MVR profile

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.44.23.1.1

mvrProfileId

Profile ID to index which MVR profile

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.46.1.44.23.1.2

mvrProfileAction

Set this object to create(1) to associate profile. Set this object
to destory(2) to deassociate profile. When
the action is complete, this object becomes noAction(0).

Enumerationr/w

Enumerated Values:

0	noAction
1	create
2	destory

.1.3.6.1.4.1.259.10.1.46.1.44.23.1.3

mvrDomainGroupStaticTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.24 · 1 row entry · 4 columns

Open in standard view

The table for configuring the static members of the
MVR group.

mvrDomainGroupStaticEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.24.1

The entry for configuring the static members of the
MVR group.

Indexes

mvrGroupStaticDomainId mvrDomainGroupStaticAddress mvrDomainGroupStaticReceiverVlan

Column	Syntax	OID
mvrGroupStaticDomainId Profile ID to index which MVR profile	Integer32 Constraints: `range: 1-5`	`.1.3.6.1.4.1.259.10.1.46.1.44.24.1.1`
mvrDomainGroupStaticAddress The multicast address of the MVR group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.46.1.44.24.1.2`
mvrDomainGroupStaticReceiverVlan The receiver vlan of this MVR group	Integer32 Constraints: `range: 1-4093`	`.1.3.6.1.4.1.259.10.1.46.1.44.24.1.3`
mvrDomainGroupStaticPorts The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group.	Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.44.24.1.4`

mvrDomainGroupCurrentTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.25 · 1 row entry · 4 columns

Open in standard view

The table for the current members of the MVR group.

mvrDomainGroupCurrentEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.25.1

The entry for the current members of the MVR group.

Indexes

mvrGroupCurrenDomainId mvrDomainGroupCurrentAddress mvrDomainGroupCurrentReceiverVlan

Column	Syntax	OID
mvrGroupCurrenDomainId Profile ID to index which MVR profile	Integer32 Constraints: `range: 1-5`	`.1.3.6.1.4.1.259.10.1.46.1.44.25.1.1`
mvrDomainGroupCurrentAddress The multicast address of the MVR group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.46.1.44.25.1.2`
mvrDomainGroupCurrentReceiverVlan This object indicates the receiver VLAN of the MVR group.	Integer32 Constraints: `range: 1-4093`	`.1.3.6.1.4.1.259.10.1.46.1.44.25.1.3`
mvrDomainGroupCurrentPorts The complete set of ports currently associated with this MVR group.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.44.25.1.4`

mvrPortStatisticsTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.32 · 1 row entry · 14 columns

Open in standard view

Table of service per port.

mvrPortStatisticsEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.32.1

Entry of service per port.

Indexes

mvrPortStatisticsDomainId mvrPortStatisticsPortIndex

Column Syntax OID

mvrPortStatisticsDomainId

MVR domain ID.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.1

mvrPortStatisticsPortIndex

The port and the trunk (excluding trunk members)
interface of the mvrPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.2

mvrPortStatisticsNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.3

mvrPortStatisticsNumJoinSend

Number of join send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.4

mvrPortStatisticsNumJoins

Number of join recieved

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.5

mvrPortStatisticsNumJoinSuccess

Number of join group success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.6

mvrPortStatisticsNumLeavesSend

Number of leave send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.7

mvrPortStatisticsNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.8

mvrPortStatisticsNumGeneralQuerySend

Number of general query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.9

mvrPortStatisticsNumGeneralQueryRecevied

Number of general query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.10

mvrPortStatisticsNumSepcificQuerySend

Number of specific query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.11

mvrPortStatisticsNumSpecificQueryReceived

Number of specific query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.12

mvrPortStatisticsNumInvalidReport

Number of invalid report received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.13

mvrPortStatisticsClearStatistics

Clear this VLAN all statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.44.32.1.14

mvrVlanStatisticsTable

table

.1.3.6.1.4.1.259.10.1.46.1.44.33 · 1 row entry · 14 columns

Open in standard view

Table of Mvr statistics VLAN.

mvrVlanStatisticsEntry entry .1.3.6.1.4.1.259.10.1.46.1.44.33.1

Entry of Mvr statistics VLAN.

Indexes

mvrVlanStatisticsDomainId mvrVlanStatisticsVlanId

Column Syntax OID

mvrVlanStatisticsDomainId

VLAN ID

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.1

mvrVlanStatisticsVlanId

VLAN ID

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.2

mvrVlanStatisticsNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.3

mvrVlanStatisticsNumJoinSend

Number of join send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.4

mvrVlanStatisticsNumJoins

Number of join received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.5

mvrVlanStatisticsNumJoinSuccess

Number of jion success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.6

mvrVlanStatisticsNumLeavesSend

Number of leave send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.7

mvrVlanStatisticsNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.8

mvrVlanStatisticsNumGeneralQuerySend

Number of general query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.9

mvrVlanStatisticsNumGeneralQueryRecevied

Number of general query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.10

mvrVlanStatisticsNumSepcificQuerySend

Number of specific query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.11

mvrVlanStatisticsNumSpecificQueryReceived

Number of sepcific query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.12

mvrVlanStatisticsNumInvalidReport

Number of invalid report received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.13

mvrVlanStatisticsClearStatistics

Clear this VLAN statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.44.33.1.14

dhcpSnoopVlanConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.46.2.1 · 1 row entry · 2 columns

Open in standard view

A table contains DHCP Snooping configurations of existing VLANs.

dhcpSnoopVlanConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.46.2.1.1

An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN.

Indexes

dhcpSnoopVlanIndex

Column Syntax OID

dhcpSnoopVlanIndex

This object indicates the VLAN ID on which DHCP Snooping
feature is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.46.2.1.1.1

dhcpSnoopVlanEnable

This object indicates whether DHCP Snooping is enabled in
this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.46.2.1.1.2

dhcpSnoopPortConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.46.3.1 · 1 row entry · 6 columns

Open in standard view

A table provides the mechanism to configure the trust
state of each port or trunk for DHCP Snooping purpose.

dhcpSnoopPortConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.46.3.1.1

An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose.

Indexes

dhcpSnoopPortIfIndex

Column Syntax OID

dhcpSnoopPortIfIndex

The ifIndex value of the port or trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.46.3.1.1.1

dhcpSnoopPortTrustEnable

This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.46.3.1.1.2

dhcpSnoopPortInformationOptionCID

This object indicates the different option that is inserted to relay agent
information circuit ID sub-option.

Enumerationr/w

Enumerated Values:

1	vlanUnitPort
2	string
3	tr101IP
4	tr101Sysname

.1.3.6.1.4.1.259.10.1.46.1.46.3.1.1.3

dhcpSnoopPortInformationOptionCIDString

Inserts string in circuit ID sub-option.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.46.1.46.3.1.1.4

dhcpSnoopPortInformationOptionCIDTr101VlanField

This object indicates whether the circuit ID TR101 vlan field is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.46.3.1.1.5

dhcpSnoopPortMaxNumber

This object indicates the max client number of per port.
If the value is 65535, it means the filter-only mode is enabled.

Integer32r/w

Constraints:
range: 1-32
range: 65535-65535

.1.3.6.1.4.1.259.10.1.46.1.46.3.1.1.6

dhcpSnoopBindingsTable

table

.1.3.6.1.4.1.259.10.1.46.1.46.4.1 · 1 row entry · 7 columns

Open in standard view

A table contains the DHCP bindings information learnt by
the device.

dhcpSnoopBindingsEntry entry .1.3.6.1.4.1.259.10.1.46.1.46.4.1.1

An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.

Indexes

dhcpSnoopBindingsIpAddress dhcpSnoopBindingsMacAddress

Column Syntax OID

dhcpSnoopBindingsVlanIndex

This object indicates the VLAN which a DHCP client host
belongs to.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.46.4.1.1.1

dhcpSnoopBindingsMacAddress

This object indicates the MAC address of a DHCP client
host.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.46.4.1.1.2

dhcpSnoopBindingsAddrType

This object indicates the type of IP address denoted in
dhcpSnoopBindingsIpAddress type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.46.4.1.1.3

dhcpSnoopBindingsEntryType

This object indicates that this binding is obtained from
dynamically learning or is a static configuraion.

Enumeration

Enumerated Values:

1	dynamic
2	static

.1.3.6.1.4.1.259.10.1.46.1.46.4.1.1.4

dhcpSnoopBindingsIpAddress

This object indicates the allocated IP address of
a DHCP client host.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.46.4.1.1.5

dhcpSnoopBindingsPortIfIndex

This object indicates the port or trunk where a DHCP client
host connects to.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.46.4.1.1.6

dhcpSnoopBindingsLeaseTime

This object indicates the leased time of this DHCP
bindings.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.46.4.1.1.7

clusterCandidateTable

table

.1.3.6.1.4.1.259.10.1.46.1.47.9 · 1 row entry · 3 columns

Open in standard view

A table listing cluster candidates.

clusterCandidateEntry entry .1.3.6.1.4.1.259.10.1.46.1.47.9.1

A conceptual row containing the information of the candidate.

Indexes

clusterCandidateMacAddr

Column Syntax OID

clusterCandidateMacAddr

The MAC address of the candidate.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.47.9.1.1

clusterCandidateDesc

The description of the candidate.

OctetString

Constraints:
range: 0-42

.1.3.6.1.4.1.259.10.1.46.1.47.9.1.3

clusterCandidateRole

The role of the candidate.
candidate(2) : The switch is discovered by the commander,
but it has not been manually configured for
access from the commander.
activeMember(3) : Th…

Enumeration

Enumerated Values:

2	candidate
3	activeMember
4	inactiveMember

.1.3.6.1.4.1.259.10.1.46.1.47.9.1.4

clusterMemberTable

table

.1.3.6.1.4.1.259.10.1.46.1.47.10 · 1 row entry · 4 columns

Open in standard view

A table listing clustering members.

clusterMemberEntry entry .1.3.6.1.4.1.259.10.1.46.1.47.10.1

A conceptual row containing the information of the member.

Indexes

clusterMemberId

Column Syntax OID

clusterMemberId

The ID of the member.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.47.10.1.1

clusterMemberMacAddr

The MAC address of the member.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.47.10.1.2

clusterMemberDesc

The description of the member.

OctetString

Constraints:
range: 0-42

.1.3.6.1.4.1.259.10.1.46.1.47.10.1.3

clusterMemberActive

The active status of the member.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is…

Enumeration

Enumerated Values:

3	activeMember
4	inactiveMember

.1.3.6.1.4.1.259.10.1.46.1.47.10.1.4

ipSrcGuardConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.48.1 · 1 row entry · 5 columns

Open in standard view

A table contains the configurations to enable or disable
IP Source Guard at each port or trunk.

ipSrcGuardConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.48.1.1

An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk.

Indexes

ipSrcGuardPortIfIndex

Column Syntax OID

ipSrcGuardPortIfIndex

This object idents the port or trunk which is capable of
IP Source Guard feature.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.48.1.1.1

ipSrcGuardMode

This object indicates whether Ip Source Guard is enabled
at this interface. If the value equals 0, it means Ip Source
Guard is disabled. If the value equals 1, it means Ip Source
Guard is enabled, and packets are filte…

Enumerationr/w

Enumerated Values:

0	diabled
1	srcIp
2	srcIpMac

.1.3.6.1.4.1.259.10.1.46.1.48.1.1.2

ipSrcGuardTableMode

This object indicates the table mode IP Source Guard select.
If the value equals 1, it means IP Source Guard choose ACL mode
to filter packet. If the value equals 2, it means IP Source
Guard choose MAC mode to filter pa…

Enumerationr/w

Enumerated Values:

1	acl
2	mac

.1.3.6.1.4.1.259.10.1.46.1.48.1.1.3

ipSrcGuardAclMaxBinding

This object indicates the maximum binding number in ACL mode.
The number of IP Source Guard bindings in ACL mode will
be limited by this value.

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.259.10.1.46.1.48.1.1.4

ipSrcGuardMacMaxBinding

This object indicates the maximum binding numer in MAC mode.
The number of IP Source Guard bindings in MAC mode will
be limited by this value.

Integer32r/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.259.10.1.46.1.48.1.1.5

ipSrcGuardAclTable

table

.1.3.6.1.4.1.259.10.1.46.1.48.3 · 1 row entry · 6 columns

Open in standard view

A table contains the IP Source Guard ACL binding information
learned by the device or configured by the user.

ipSrcGuardAclEntry entry .1.3.6.1.4.1.259.10.1.46.1.48.3.1

An instance contains the IP address, Mac address, entry type,
VLAN number, interface number and status.

Indexes

ipSrcGuardAclBindingIpAddress ipSrcGuardAclBindingMacAddress ipSrcGuardAclBindingEntryType

Column Syntax OID

ipSrcGuardAclBindingIpAddress

This object indicates the IP address of a ACL binding entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.48.3.1.1

ipSrcGuardAclBindingMacAddress

This object indicates the MAC address of a ACL binding entry.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.48.3.1.2

ipSrcGuardAclBindingEntryType

This object indicates that this binding is obtained from
dynamically learning or is a static configuraion.

Enumeration

Enumerated Values:

1	static
2	dhcp
3	bootp

.1.3.6.1.4.1.259.10.1.46.1.48.3.1.3

ipSrcGuardAclBindingVlanIndex

This object indicates the VLAN which a ACL binding belongs to.

Q-BRIDGE-MIBVlanIndexr/w

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.48.3.1.4

ipSrcGuardAclBindingPortIfIndex

This object indicates the port or trunk where a ACL binding associated.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.48.3.1.5

ipSrcGuardAclBindingStatus

The status of this conceptual row entry. This object issued to
manage the creation and deletion of conceptual rows.
The status column has six defined values: - 'active', which
indicates that the conceptual row is avail…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.48.3.1.6

ipSrcGuardMacTable

table

.1.3.6.1.4.1.259.10.1.46.1.48.4 · 1 row entry · 6 columns

Open in standard view

A table contains the IP Source Guard MAC binding information
learned by the device or configured by the user.

ipSrcGuardMacEntry entry .1.3.6.1.4.1.259.10.1.46.1.48.4.1

An instance contains the IP address, Mac address,
VLAN number, interface number and status.

Indexes

ipSrcGuardMacBindingMacAddress ipSrcGuardMacBindingIpAddress

Column Syntax OID

ipSrcGuardMacBindingMacAddress

This object indicates the MAC address of a MAC binding entry.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.48.4.1.1

ipSrcGuardMacBindingIpAddress

This object indicates the IP address of a MAC binding entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.46.1.48.4.1.2

ipSrcGuardMacBindingStartVlan

This object indicates the start VLAN which a MAC binding belongs to.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.48.4.1.3

ipSrcGuardMacBindingEndVlan

This object indicates the end VLAN which a MAC binding belongs to.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.48.4.1.4

ipSrcGuardMacBindingPortList

This object indicates the port or trunk where a MAC binding associated.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.46.1.48.4.1.5

ipSrcGuardMacBindingStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.48.4.1.6

oamPortClearStatTable

table

.1.3.6.1.4.1.259.10.1.46.1.52.1 · 1 row entry · 2 columns

Open in standard view

A table contains the information of clear OAM statistics
at each port.

oamPortClearStatEntry entry .1.3.6.1.4.1.259.10.1.46.1.52.1.1

An entry contains the information of clear OAM statistics
at each port.

Indexes

oamPortClearStatIndex

Column Syntax OID

oamPortClearStatIndex

This object shows the ifIndex value of the port excluding
trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.52.1.1.1

oamClearStatistics

This variable is used to clear the counters for OAM.
Set this variable to clear(2) to perform the clear operation,
noClear(1) will always be displayed when reading this
variable.

Enumerationr/w

Enumerated Values:

1	noClear
2	clear

.1.3.6.1.4.1.259.10.1.46.1.52.1.1.2

oamLoopbackTable

table

.1.3.6.1.4.1.259.10.1.46.1.52.4 · 1 row entry · 7 columns

Open in standard view

Table for OAM remote loopback test.

oamLoopbackEntry entry .1.3.6.1.4.1.259.10.1.46.1.52.4.1

Entry for OAM remote loopback test.

Indexes

oamLoopbackTestIfIndex

Column Syntax OID

oamLoopbackTestIfIndex

The ifIndex value of the port
(excluding trunk and trunk members). The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.52.4.1.1

oamLoopbackTestPacketNumber

Setting the packet number when performing loopback test.

Integer32r/w

Constraints:
range: 1-99999999

.1.3.6.1.4.1.259.10.1.46.1.52.4.1.2

oamLoopbackTestPacketSize

Setting the packet size when performing loopback test.

Integer32r/w

Constraints:
range: 64-1518

.1.3.6.1.4.1.259.10.1.46.1.52.4.1.3

oamLoopbackTestAction

Setting this object to test(2) to begin the loopback test.
This object will be noTest(1) when the loopback test is
canceled or the loopback test has finished.

Enumerationr/w

Enumerated Values:

1	noTest
2	test

.1.3.6.1.4.1.259.10.1.46.1.52.4.1.4

oamLoopbackTestResultTx

A count of the the total number of loopback frames transmitted
at last loopback test on this interface.

framesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.52.4.1.5

oamLoopbackTestResultRx

A count of the the total number of loopback frames received
at last loopback test on this interface.

framesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.52.4.1.6

oamLoopbackTestResultLossRate

Packet loss rate of this loopback test operation in hundredths
of a percent. This variable is calculated by
oamLoopbackTestResultRx and oamLoopbackTestResultTx.

Integer32

Constraints:
range: 0-10000

.1.3.6.1.4.1.259.10.1.46.1.52.4.1.7

oamPortClearEventLogTable

table

.1.3.6.1.4.1.259.10.1.46.1.52.6 · 1 row entry · 2 columns

Open in standard view

A table containing the information of clear OAM event log
at each port.

oamPortClearEventLogEntry entry .1.3.6.1.4.1.259.10.1.46.1.52.6.1

An entry containing the information of clear OAM event log
at each port.

Indexes

oamPortClearEventLogIndex

Column Syntax OID

oamPortClearEventLogIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.52.6.1.1

oamPortClearEventLogAction

This variable is used to clear the event log for OAM.
Set this variable to clear(2) to perform the clear operation.
noClear(1) will always be displayed when reading this
variable.

Enumerationr/w

Enumerated Values:

1	noClear
2	clear

.1.3.6.1.4.1.259.10.1.46.1.52.6.1.2

mldSnoopRouterCurrentTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.9 · 1 row entry · 2 columns

Open in standard view

Table for current router ports.

mldSnoopRouterCurrentEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.9.1

Entry for current router ports.

Indexes

mldSnoopRouterCurrentVlanIndex

Column	Syntax	OID
mldSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopRout…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.54.9.1.1`
mldSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to mldSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.54.9.1.2`

mldSnoopRouterStaticTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.10 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

mldSnoopRouterStaticEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.10.1

Entry for static router ports.

Indexes

mldSnoopRouterStaticVlanIndex

Column Syntax OID

mldSnoopRouterStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.10.1.1

mldSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.54.10.1.2

mldSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.54.10.1.3

mldSnoopMulticastCurrentTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.11 · 1 row entry · 4 columns

Open in standard view

Table for current multicast addresses.

mldSnoopMulticastCurrentEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.11.1

Entry for current multicast addresses.

Indexes

mldSnoopMulticastCurrentVlanIndex mldSnoopMulticastCurrentIpAddress mldSnoopMulticastCurrentSourceIpAddress

Column	Syntax	OID
mldSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopMult…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.54.11.1.1`
mldSnoopMulticastCurrentIpAddress IPv6 address of multicast group.	INET-ADDRESS-MIBInetAddressIPv6 Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.259.10.1.46.1.54.11.1.2`
mldSnoopMulticastCurrentSourceIpAddress IPv6 address of the source.	INET-ADDRESS-MIBInetAddressIPv6 Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.259.10.1.46.1.54.11.1.3`
mldSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to mldSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.54.11.1.4`

mldSnoopMulticastStaticTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.12 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

mldSnoopMulticastStaticEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.12.1

Entry for static multicast addresses.

Indexes

mldSnoopMulticastStaticVlanIndex mldSnoopMulticastStaticIpAddress

Column Syntax OID

mldSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.12.1.1

mldSnoopMulticastStaticIpAddress

IPv6 address of multicast group.

INET-ADDRESS-MIBInetAddressIPv6

Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.259.10.1.46.1.54.12.1.2

mldSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.46.1.54.12.1.3

mldSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.54.12.1.4

mldSnoopCurrentVlanTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.13 · 1 row entry · 3 columns

Open in standard view

Table for configuring MLD snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received.

mldSnoopCurrentVlanEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.13.1

Entry for configuring MLD snooping.

Indexes

mldSnoopCurrentVlanIndex

Column Syntax OID

mldSnoopCurrentVlanIndex

Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.13.1.1

mldSnoopCurrentVlanImmediateLeave

The parameter to enable or disable the
Immediate-Leave feature on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.54.13.1.2

mldSnoopCurrentVlanImmediateLeaveByHostIp

The parameter to enable or disable the
Immediate-Leave by-host-ip feature on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.54.13.1.3

mldSnoopPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.16 · 1 row entry · 15 columns

Open in standard view

Table of MLD Snooping service per port.

mldSnoopPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.16.1

Entry of MLD Snooping service per port.

Indexes

mldSnoopPortIndex

Column Syntax OID

mldSnoopPortIndex

The port and the trunk (excluding trunk members)
interface of the mldsnpPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.1

mldSnoopQueryDrop

Parameter to enable or disable dropping MLD Query packet.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.3

mldSnoopMulticastDataDrop

Parameter to enable or disable dropping IPv6 multicast data

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.4

mldSnoopPortNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.5

mldSnoopPortNumJoinSend

Number of join send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.6

mldSnoopPortNumJoins

Number of join recieved

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.7

mldSnoopPortNumJoinSuccess

Number of join group success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.8

mldSnoopPortNumLeavesSend

Number of leave send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.9

mldSnoopPortNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.10

mldSnoopPortNumGeneralQuerySend

Number of general query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.11

mldSnoopPortNumGeneralQueryRecevied

Number of general query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.12

mldSnoopPortNumSepcificQuerySend

Number of specific query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.13

mldsnoopPortNumSpecificQueryReceived

Number of specific query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.14

mldSnoopPortNumInvalidReport

Number of invalid report received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.15

mldSnoopPortClearStatistics

Clear this VLAN all statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.54.16.1.16

mldSnoopProfileTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.18 · 1 row entry · 3 columns

Open in standard view

The table for configuring the MLD snooping profile.

mldSnoopProfileEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.18.1

The entry for configuring the MLD snooping profile.

Indexes

mldSnoopProfileId

Column Syntax OID

mldSnoopProfileId

The ID of the MLD snooping profile.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.18.1.1

mldSnoopProfileAction

The access mode of the MLD snooping profile.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.46.1.54.18.1.2

mldSnoopProfileStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.54.18.1.3

mldSnoopProfileRangeTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.20 · 1 row entry · 5 columns

Open in standard view

The table for configuring the range of the MLD snooping
profile.

mldSnoopProfileRangeEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.20.1

The entry for configuring the range of the MLD snooping
profile.

Indexes

mldSnoopProfileRangeProfileId mldSnoopProfileRangeInetAddressType mldSnoopProfileRangeStartInetAddress mldSnoopProfileRangeEndInetAddress

Column Syntax OID

mldSnoopProfileRangeProfileId

This is defined as mldSnoopProfileId.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.20.1.1

mldSnoopProfileRangeInetAddressType

The address type is associated with this agent.
Only ipv6(2) type is supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.46.1.54.20.1.2

mldSnoopProfileRangeStartInetAddress

The specified addresses in the start of the controlled
IPv6 multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.54.20.1.3

mldSnoopProfileRangeEndInetAddress

The specified addresses in the end of the controlled
IPv6 multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.54.20.1.4

mldSnoopProfileRangeAction

The access mode of the MLD snooping profile.

Enumeration

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.46.1.54.20.1.5

mldSnoopFilterPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.21 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in MLD filtering.

mldSnoopFilterPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.21.1

Entry for port configuration in MLD filtering.

Indexes

mldSnoopFilterPortIndex

Column	Syntax	OID
mldSnoopFilterPortIndex The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.54.21.1.1`
mldSnoopFilterPortProfileId The mldSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the mldSnoopProfileId object. If there is no corresponding entry in the mldSnoopProfileTable,…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.54.21.1.2`

mldSnoopThrottlePortTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.22 · 1 row entry · 5 columns

Open in standard view

Table for port configuration in MLD throttling.

mldSnoopThrottlePortEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.22.1

Entry for port configuration in MLD throttling.

Indexes

mldSnoopThrottlePortIndex

Column Syntax OID

mldSnoopThrottlePortIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.22.1.1

mldSnoopThrottlePortRunningStatus

Describes the running status of the MLD throttling to the switch.
A value of true(1) indicates the MLD throttling mechanism is active.
A value of false(2) indicates the MLD throttling mechanism is inactive.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.54.22.1.2

mldSnoopThrottlePortAction

The action mode of the MLD throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an MLD report and the number of current joined multicast groups
is equal to the …

Enumerationr/w

Enumerated Values:

1	replace
2	deny

.1.3.6.1.4.1.259.10.1.46.1.54.22.1.3

mldSnoopThrottlePortMaxGroups

The maximum number of MLD groups that the interface can join.

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.259.10.1.46.1.54.22.1.4

mldSnoopThrottlePortCurrentGroups

The current number of MLD groups that the interface has joined.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.54.22.1.5

mldSnoopVlanTable

table

.1.3.6.1.4.1.259.10.1.46.1.54.24 · 1 row entry · 13 columns

Open in standard view

Table of MLD Snooping service per port.

mldSnoopVlanEntry entry .1.3.6.1.4.1.259.10.1.46.1.54.24.1

Entry of MLD Snooping service per VLAN.

Indexes

mldSnoopVlanIndex

Column Syntax OID

mldSnoopVlanIndex

VLAN ID

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.1

mldSnoopVlanNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.2

mldSnoopVlanNumJoinSend

Number of join send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.3

mldSnoopVlanNumJoins

Number of join received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.4

mldSnoopVlanNumJoinSuccess

Number of jion success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.5

mldSnoopVlanNumLeavesSend

Number of leave send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.6

mldSnoopVlanNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.7

mldSnoopVlanNumGeneralQuerySend

Number of general query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.8

mldSnoopVlanNumGeneralQueryRecevied

Number of general query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.9

mldSnoopVlanNumSepcificQuerySend

Number of specific query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.10

mldsnoopVlanNumSpecificQueryReceived

Number of sepcific query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.11

mldSnoopVlanNumInvalidReport

Number of invalid report received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.12

mldSnoopVlanClearStatistics

Clear this VLAN statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.54.24.1.13

daiVlanTable

table

.1.3.6.1.4.1.259.10.1.46.1.56.2.1 · 1 row entry · 4 columns

Open in standard view

A table contains dynamic ARP inspection configurations
for existing VLANs.

daiVlanEntry entry .1.3.6.1.4.1.259.10.1.46.1.56.2.1.1

An instance containing the configuration of dynamic ARP
inspection for each existing VLAN.

Indexes

daiVlanIndex

Column Syntax OID

daiVlanIndex

This object indicates the VLAN ID on which dynamic ARP
inspection is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.56.2.1.1.1

daiVlanStatus

This object indicates whether dynamic ARP inspection
is enabled in this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.56.2.1.1.2

daiVlanArpAclName

Specifies the ARP ACL name bound to the interface.
The default value of daiVlanArpAclStatus is dynamic(2).

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.259.10.1.46.1.56.2.1.1.3

daiVlanArpAclStatus

Set to static(1) means packets not matching the ACL are
dropped. Set to dynamic(2) means packets not matching the
ACL are validated by the DHCP snooping binding table.
When daiVlanArpAclName is configured, the default v…

Enumerationr/w

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.259.10.1.46.1.56.2.1.1.4

daiPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.56.3.1 · 1 row entry · 3 columns

Open in standard view

A table containing dynamic ARP inspection configurations
for port interfaces.

daiPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.56.3.1.1

An instance containing the configuration of dynamic ARP
inspection at each port interface.

Indexes

daiPortIfIndex

Column Syntax OID

daiPortIfIndex

The ifIndex value of the port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.56.3.1.1.1

daiPortTrustStatus

This object indicates whether the port is trusted for
dynamic ARP inspection.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.56.3.1.1.2

daiPortRateLimit

The value of rate limit threshold per second of disposing
ARP messages. Set the value 0xFFFFFFFF as no rate limit.

Unsigned32r/w

Constraints:
range: 0-2048
range: 4294967295-4294967295

.1.3.6.1.4.1.259.10.1.46.1.56.3.1.1.3

daiLogTable

table

.1.3.6.1.4.1.259.10.1.46.1.56.4.1 · 1 row entry · 7 columns

Open in standard view

A table containing dynamic ARP inspection log
information.

daiLogEntry entry .1.3.6.1.4.1.259.10.1.46.1.56.4.1.1

An instance containing log information of dynamic ARP
inspection at each VLAN interface.

Indexes

daiLogIndex

Column	Syntax	OID
daiLogIndex This object indicates the index of dynamic ARP inspection log information.	Integer32 Constraints: `range: 1-256`	`.1.3.6.1.4.1.259.10.1.46.1.56.4.1.1.1`
daiLogVlan This object indicates the VLAN ID of dynamic ARP inspection log information.	Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex `Unsigned32`	`.1.3.6.1.4.1.259.10.1.46.1.56.4.1.1.2`
daiLogPort This object indicates the ifIndex of dynamic ARP inspection log information.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.56.4.1.1.3`
daiLogSrcIpAddress The source IP address of dynamic ARP inspection log information.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.46.1.56.4.1.1.4`
daiLogDestIpAddress The destination IP address of dynamic ARP inspection log information.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.46.1.56.4.1.1.5`
daiLogSrcMacAddress The source MAC address of dynamic ARP inspection log information.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.259.10.1.46.1.56.4.1.1.6`
daiLogDestMacAddress The destination MAC address of dynamic ARP inspection log information.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.259.10.1.46.1.56.4.1.1.7`

pppoeiaPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.60.2 · 1 row entry · 13 columns

Open in standard view

Table for port configuration in PPPoE Intermediate Agent.

pppoeiaPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.60.2.1

Entry for port configuration in PPPoE Intermediate Agent.

Indexes

pppoeiaPortIndex

Column Syntax OID

pppoeiaPortIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.1

pppoeiaPortStatus

This parameter is used to enable/disable PPPoE
Intermediate Agent on interfaces.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.2

pppoeiaPortTrustStatus

This parameter is used to enable/disable trust mode of
PPPoE Intermediate Agent on interfaces.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.3

pppoeiaPortVendorTagStrip

This parameter is used to enable/disable stripping of
vendor tag status of PPPoE Intermediate Agent on
interfaces.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.4

pppoeiaPortCircuitId

Specifies circuit ID of PPPoE Intermediate Agent on
interfaces. Use empty to revert to default value.

OctetStringr/w

Constraints:
range: 0-10

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.5

pppoeiaPortOperCircuitId

The operational circuit ID of PPPoE Intermediate Agent on
interfaces.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.6

pppoeiaPortRemoteId

Specifies remote ID of PPPoE Intermediate Agent on
interfaces. Use empty to revert to default value.

OctetStringr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.7

pppoeiaPortOperRemoteId

The operational remote ID of PPPoE Intermediate Agent on
interfaces.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.8

pppoeiaPortRemoteIdDelimiterEnable

This parameter is used to enable/disable delimiter for
remote ID of PPPoE Intermediate Agent on interfaces.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.9

pppoeiaPortRemoteIdDelimiterAscii

Specifies the ASCII code of delimiter for remote ID
of PPPoE Intermediate Agent on interfaces. Use 256 to
revert to default value.

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.10

pppoeiaPortCircuitIdMode

This object indicates the different option that is inserted to relay agent
information circuit ID sub-option.

Enumerationr/w

Enumerated Values:

0	default
1	unitPortVlan
2	hostnamePortVlan
3	string

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.11

pppoeiaPortRemoteIdMode

This object indicates the different option that insert to relay agent
information remote ID sub-option.

Enumerationr/w

Enumerated Values:

0	default
1	portmac
2	portname
3	string
4	cpemac

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.12

pppoeiaPortOptionCarryToClient

This parameter is used to enable/disable carry option to client.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.60.2.1.13

pppoeiaPortStatsTable

table

.1.3.6.1.4.1.259.10.1.46.1.60.3 · 1 row entry · 11 columns

Open in standard view

Table for port statistics in PPPoE Intermediate Agent.

pppoeiaPortStatsEntry entry .1.3.6.1.4.1.259.10.1.46.1.60.3.1

Entry for port statistics in PPPoE Intermediate Agent.

Indexes

pppoeiaPortStatsIndex

Column Syntax OID

pppoeiaPortStatsIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.1

pppoeiaPortStatsRecvPkts

Indicates the total number of received packets of the
interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.2

pppoeiaPortStatsRecvPadiPkts

Indicates the total number of received PPPoE Active
Discovery Initiation packets of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.3

pppoeiaPortStatsRecvPadoPkts

Indicates the total number of received PPPoE Active
Discovery Offer packets of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.4

pppoeiaPortStatsRecvPadrPkts

Indicates the total number of received PPPoE Active
Discovery Request packets of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.5

pppoeiaPortStatsRecvPadsPkts

Indicates the total number of received PPPoE Active
Discovery Session-confirmation packets of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.6

pppoeiaPortStatsRecvPadtPkts

Indicates the total number of received PPPoE Active
Discovery Terminate packets of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.7

pppoeiaPortStatsDropUntrustRespPkts

Indicates the total number of response packets
dropped because they were untrusted.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.8

pppoeiaPortStatsDropUntrustReqPkts

Indicates the total number of request packets
dropped because they were untrusted.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.9

pppoeiaPortStatsDropMalformedPkts

Indicates the total number of malformed packets
dropped because they were untrusted.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.10

pppoeiaPortStatsClearAction

This variable is used to clear the counters of specified
interface. Set clear(1) to perform the clear operation.
The value noClear(2) will always be displayed when reading.

Enumerationr/w

Enumerated Values:

1	clear
2	noClear

.1.3.6.1.4.1.259.10.1.46.1.60.3.1.11

timeRangeTable

table

.1.3.6.1.4.1.259.10.1.46.1.61.1 · 1 row entry · 3 columns

Open in standard view

Table for time range.

timeRangeEntry entry .1.3.6.1.4.1.259.10.1.46.1.61.1.1

Entry for time range.

Indexes

timeRangeIndex

Column Syntax OID

timeRangeIndex

The index of time range entry.

Integer32

Constraints:
range: 0-49

.1.3.6.1.4.1.259.10.1.46.1.61.1.1.1

timeRangeName

The name of time range entry.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.46.1.61.1.1.2

timeRangeStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.61.1.1.3

timeRangePeriodicTable

table

.1.3.6.1.4.1.259.10.1.46.1.61.2 · 1 row entry · 8 columns

Open in standard view

Table for periodic time-range entries.

timeRangePeriodicEntry entry .1.3.6.1.4.1.259.10.1.46.1.61.2.1

Entry for periodic time-range.

Indexes

timeRangePeriodicTimeRangeIndex timeRangePeriodicStartDaysOfTheWeek timeRangePeriodicStartHours timeRangePeriodicStartMinutes timeRangePeriodicEndDaysOfTheWeek timeRangePeriodicEndHours timeRangePeriodicEndMinutes

Column Syntax OID

timeRangePeriodicTimeRangeIndex

The index of time range. The object
should exist in timeRangeIndex of timeRangeTable.

Integer32

Constraints:
range: 0-6

.1.3.6.1.4.1.259.10.1.46.1.61.2.1.1

timeRangePeriodicStartDaysOfTheWeek

Specifies the start days-of-the-week of the periodic time-range entry.
1. If the start days-of-the-week is set to Sunday, Monday... or Saturday
then the end days-of-the-week shall be set to Sunday, Monday..., or Satu…

Enumerationr/w

Enumerated Values:

0	sunday
1	monday
2	tuesday
3	wednesday
4	thursday
5	friday
6	saturday
7	daily
8	weekdays
9	weekend

.1.3.6.1.4.1.259.10.1.46.1.61.2.1.2

timeRangePeriodicStartHours

Specifies the start hours of the periodic time-range entry.

Integer32

Constraints:
range: 0-23

.1.3.6.1.4.1.259.10.1.46.1.61.2.1.3

timeRangePeriodicStartMinutes

Specifies the start minutess of the periodic time-range entry.

Integer32

Constraints:
range: 0-59

.1.3.6.1.4.1.259.10.1.46.1.61.2.1.4

timeRangePeriodicEndDaysOfTheWeek

Specifies the end days-of-the-week of the periodic time-range entry.
1. If the start days-of-the-week is set to Sunday, Monday... or Saturday
then the end days-of-the-week shall be set to Sunday, Monday..., or Saturd…

Enumerationr/w

Enumerated Values:

0	sunday
1	monday
2	tuesday
3	wednesday
4	thursday
5	friday
6	saturday
7	daily
8	weekdays
9	weekend

.1.3.6.1.4.1.259.10.1.46.1.61.2.1.5

timeRangePeriodicEndHours

Specifies the end hours of the periodic time-range entry.

Integer32

Constraints:
range: 0-23

.1.3.6.1.4.1.259.10.1.46.1.61.2.1.6

timeRangePeriodicEndMinutes

Specifies the end minutess of the periodic time-range entry.

Integer32

Constraints:
range: 0-59

.1.3.6.1.4.1.259.10.1.46.1.61.2.1.7

timeRangePeriodicStatus

Setting this to valid(1) creates an periodic entry.
Setting this to invalid(2) destroys an periodic entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.61.2.1.8

timeRangeAbsoluteTable

table

.1.3.6.1.4.1.259.10.1.46.1.61.3 · 1 row entry · 12 columns

Open in standard view

Table for absolute time-range entries.

timeRangeAbsoluteEntry entry .1.3.6.1.4.1.259.10.1.46.1.61.3.1

Entry for absolute time-range.

Indexes

timeRangeAbsoluteTimeRangeIndex timeRangeAbsoluteStartYears timeRangeAbsoluteStartMonths timeRangeAbsoluteStartDays timeRangeAbsoluteStartHours timeRangeAbsoluteStartMinutes timeRangeAbsoluteEndYears timeRangeAbsoluteEndMonths timeRangeAbsoluteEndDays timeRangeAbsoluteEndHours timeRangeAbsoluteEndMinutes

Column Syntax OID

timeRangeAbsoluteTimeRangeIndex

The index of time range. The object
should exist in timeRangeIndex of timeRangeTable.

Integer32

Constraints:
range: 0-49

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.1

timeRangeAbsoluteStartYears

Specifies the start years of the absolute time-range entry.
65535 means don't care.

Integer32

Constraints:
range: 2013-2037
range: 65535-65535

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.2

timeRangeAbsoluteStartMonths

Specifies the start months of the absolute time-range entry.
255 means don't care.

Integer32

Constraints:
range: 1-12
range: 255-255

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.3

timeRangeAbsoluteStartDays

Specifies the start days of the absolute time-range entry.
255 means don't care.

Integer32

Constraints:
range: 1-31
range: 255-255

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.4

timeRangeAbsoluteStartHours

Specifies the start hours of the absolute time-range entry.\
255 means don't care.

Integer32

Constraints:
range: 0-23
range: 255-255

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.5

timeRangeAbsoluteStartMinutes

Specifies the start minutes of the absolute time-range entry.\
255 means don't care.

Integer32

Constraints:
range: 0-59
range: 255-255

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.6

timeRangeAbsoluteEndYears

Specifies the end years of the absolute time-range entry.
65535 means don't care.

Integer32

Constraints:
range: 2013-2037
range: 65535-65535

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.7

timeRangeAbsoluteEndMonths

Specifies the end months of the absolute time-range entry.
255 means don't care.

Integer32

Constraints:
range: 1-12
range: 255-255

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.8

timeRangeAbsoluteEndDays

Specifies the end days of the absolute time-range entry.
255 means don't care.

Integer32

Constraints:
range: 1-31
range: 255-255

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.9

timeRangeAbsoluteEndHours

Specifies the end hours of the absolute time-range entry.\
255 means don't care.

Integer32

Constraints:
range: 0-23
range: 255-255

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.10

timeRangeAbsoluteEndMinutes

Specifies the end minutes of the absolute time-range entry.\
255 means don't care.

Integer32

Constraints:
range: 0-59
range: 255-255

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.11

timeRangeAbsoluteStatus

Setting this to valid(1) creates an absolute entry.
Setting this to invalid(2) destroys an absolute entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.46.1.61.3.1.12

erpsVlanGroupTable

table

.1.3.6.1.4.1.259.10.1.46.1.62.7 · 1 row entry · 4 columns

Open in standard view

Table for ERPS VLAN group configuration.

erpsVlanGroupEntry entry .1.3.6.1.4.1.259.10.1.46.1.62.7.1

Entry for ERPS VLAN group configuration.

Indexes

erpsVlanGroupIndex

Column Syntax OID

erpsVlanGroupIndex

An index that uniquely identifies an entry in the
erpsVlanGroupTable.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.62.7.1.1

erpsVlanGroupName

The vlan group name that uniquely identifies an entry in the
erpsVlanGroupTable.

OctetStringr/w

Constraints:
range: 0-12

.1.3.6.1.4.1.259.10.1.46.1.62.7.1.2

erpsVlanGroupVlanList

Configures a set of VLANs.

OctetStringr/w

Constraints:
range: 0-512

.1.3.6.1.4.1.259.10.1.46.1.62.7.1.3

erpsVlanGroupRowStatus

The row status variable, used according to row
installation and removal conventions.

A row entry cannot be modified when the status is
marked as active(1).

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.62.7.1.4

erpsRingTable

table

.1.3.6.1.4.1.259.10.1.46.1.62.8 · 1 row entry · 6 columns

Open in standard view

Table for ERPS ring configuration.

erpsRingEntry entry .1.3.6.1.4.1.259.10.1.46.1.62.8.1

Entry for ERPS ring configuration.

Indexes

erpsRingIndex

Column Syntax OID

erpsRingIndex

An index that uniquely identifies an entry in the
erpsRingTable.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.62.8.1.1

erpsRingName

The ring name that uniquely identifies an entry in the
erpsRingTable.

OctetStringr/w

Constraints:
range: 0-12

.1.3.6.1.4.1.259.10.1.46.1.62.8.1.2

erpsRingWestPort

Each node on the ring connects to the ring through two ports.
As part of the protection switching scheme, one port can be
configured as the west port for the specified ring. The east
port and west port can not be config…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.62.8.1.3

erpsRingEastPort

Each node on the ring connects to the ring through two ports.
As part of the protection switching scheme, one port can be
configured as the east port for the specified ring. The east
port and west port can not be config…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.62.8.1.4

erpsRingExclusionVlan

A bitmap of VLAN groups lists a set of unprotected VLAN group IDs.
Inclusion-vlan command is mandatory for each ERP instance
while exclusion-vlan command is optional for each physical ring.

OctetStringr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.10.1.46.1.62.8.1.5

erpsRingRowStatus

The row status variable, used according to row
installation and removal conventions.

A row entry cannot be modified when the status is
marked as active(1).

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.62.8.1.6

erpsInstanceTable

table

.1.3.6.1.4.1.259.10.1.46.1.62.9 · 1 row entry · 32 columns

Open in standard view

Table for ERPS instance configuration.

erpsInstanceEntry entry .1.3.6.1.4.1.259.10.1.46.1.62.9.1

Entry for ERPS instance configuration.

Indexes

erpsInstanceIndex

Column Syntax OID

erpsInstanceIndex

An index that uniquely identifies an entry in the
erpsInstanceTable.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.1

erpsInstanceName

Configures a instance and specifies name for the instance.

OctetStringr/w

Constraints:
range: 0-12

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.2

erpsInstanceMegLevel

Configures the maintenance entity group (MEG) level which is
used to provide a communication channel for instance automatic
protection switching (R-APS) information.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.3

erpsInstanceControlVlanID

This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
Configures one control VLAN for each ERPS instance. The control
VLAN is used only to send and receive ERPS message. A control
VLAN can not belong to more than one E…

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.4

erpsInstanceRplType

Set to none(1) to make this node act as a normal node.
Set to owner(2) to make this node act as an RPL owner.
Set to neighbor(3) to make this node act as an RPL neighbor.

Enumerationr/w

Enumerated Values:

1	none
2	owner
3	neighbor

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.5

erpsInstanceWtrTimer

Configures the value of the wait-to-restore timer which is used
by the RPL owner node to prevent frequent switching operations
that may be caused by intermittent failures.
The range is in 1 minute steps between 1 and 12…

Integer32r/w

Constraints:
range: 1-12

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.6

erpsInstanceGuardTimer

Configures the value of the guard timer which is used to
prevent instance nodes from receiving outdated R-APS messages.
The range is in 10 ms steps between 10 ms and 2 seconds,
with a default value of 500 ms.

Integer32r/w

Constraints:
range: 10-2000

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.7

erpsInstanceHoldoffTimer

Configures the value of the holdoff timer which is used to
prevent reporting error event immediately to protection
switching if the provisioned holdoff timer value is non-zero.
The range is in 100 ms steps between 0 and…

Integer32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.8

erpsInstanceWestMepId

Configures a CFM Down MEP on west ring port. A down MEP can be
uniquely select by given a MEPID, instance's MEG level, and
instance's control VLAN ID. A value of 0 means no west MEP is
not configured for this instance.

Integer32r/w

Constraints:
range: 0-8191

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.9

erpsInstanceEastMepId

Configures a CFM Down MEP on east ring port. A down MEP can be
uniquely select by given a MEPID, instance's MEG level, and
instance's control VLAN ID. A value of 0 means no east MEP is
not configured for this instance.

Integer32r/w

Constraints:
range: 0-8191

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.10

erpsInstanceMajorRingIndex

An index that uniquely identifies an entry in the
erpsInstanceTable. A value of 0 means this instance has no major
ring.
Notes: This objest can not be configured if erpsRingEastPort of
associted physical ring of this in…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.11

erpsInstancePropagateTC

Set to enabled(1) to transmit topology change signal to the
major ring. It will not take effect if erpsInstanceMajorRingIndex
doesn't designated.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.12

erpsInstanceNonRevertive

For each instances of a ring is configured independently; as a
result of that, the recovery mechanism is invoked separately for
each instance according to its own configuration of operation mode
when the SF condition is…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.14

erpsInstanceRapsDefMac

Set to enabled(1) to use R-APS default MAC. If this configuration
enabled then R-APS default MAC 01-19-A7-00-00-01 shall be
used as destination address for the R-APS PDUs.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.15

erpsInstanceRapsWithoutVc

Set to enabled(1) To specify the ERP instance as a sbu ring without
virtual channel.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.16

erpsInstanceVersion

Set to v2(2) to enable ERPS v2 operation.

Enumerationr/w

Enumerated Values:

1	v1
2	v2

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.17

erpsInstanceInclusionVlan

A bitmap of VLAN groups lists a set of VLAN group IDs protected by this instance.
Inclusion-vlan command is mandatory for each ERP instance
while exclusion-vlan command is optional for each physical ring. In the case
of…

OctetStringr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.18

erpsInstancePhysicalRingIndex

An index that uniquely identifies an entry in the erpsRingTable.
Associates the ERP instance to a physical ring.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.19

erpsInstanceForcedSwitch

Set to west(2) to perform the forced switch command on west
ring port of specified Instance.
Set to east(3) to perform the forced switch command on east
ring port of specified Instance.
The value none(1) will be display…

Enumerationr/w

Enumerated Values:

1	none
2	west
3	east

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.20

erpsInstanceManualSwitch

Set to west(2) to perform the manual switch command on west
ring port of specified Instance.
Set to east(3) to perform the manual switch command on east
ring port of specified Instance.
The value none(1) will be display…

Enumerationr/w

Enumerated Values:

1	none
2	west
3	east

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.21

erpsInstanceClear

Set to clear(1) to perform the clear command on specified
Instance.
The value noClear(2) will always be displayed when reading.

Enumerationr/w

Enumerated Values:

1	clear
2	noClear

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.22

erpsInstanceClearStatisticsAction

This variable is used to clear the counters of specified
instance. Set to clear(1) to perform the clear operation.
The value noClear(2) will always be displayed when reading.

Enumerationr/w

Enumerated Values:

1	clear
2	noClear

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.23

erpsInstanceRowStatus

The row status variable, used according to row
installation and removal conventions.

A row entry cannot be modified when the status is
marked as active(1).

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.24

erpsInstanceNodeState

This value displays the node's current state.
It displays one of the following states
(1) init -- The node is in the init state.
(The node state will stay in init state
if any one of global, ring, or instance …

Enumeration

Enumerated Values:

1	init
2	idle
3	protection
4	manualSwitch
5	forcedSwitch
6	pending

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.25

erpsInstanceWestRingPortState

This value displays the west ring port's current state.
It displays one of the following states
(1) unknown -- The port's current state is unknown.
(The port's current state will stay in unknown state
if the nod…

Enumeration

Enumerated Values:

1	unknown
2	blocking
3	forwarding

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.26

erpsInstanceEastRingPortState

This value displays the east ring port's current state.
It displays one of the following states
(1) unknown -- The port's current state is unknown.
(The port's current state will stay in unknown state
if the nod…

Enumeration

Enumerated Values:

1	unknown
2	blocking
3	forwarding

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.27

erpsInstanceWtrExpire

Displays the time remaining in seconds until the
wait-to-restore timer countdown expires.
A value of 0 means no countdown is running.

Integer32

Constraints:
range: 0-720

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.28

erpsInstanceWtbExpire

Displays the time remaining in ms until the
wait-to-block timer countdown expires.
A value of 0 means no countdown is running.

Integer32

Constraints:
range: 0-7000

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.29

erpsInstanceWestRingPortSf

This value displays the west ring port's current SF state.
It displays one of the following states
(1) none -- No SF is detected.
(2) detected -- SF is detected.

Enumeration

Enumerated Values:

1	none
2	detected

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.30

erpsInstanceEastRingPortSf

This value displays the east ring port's current SF state.
It displays one of the following states
(1) none -- No SF is detected.
(2) detected -- SF is detected.

Enumeration

Enumerated Values:

1	none
2	detected

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.31

erpsInstanceMultiRplOwnerWarn

This value displays the multiple PPL owner warning state.
It displays one of the following states
(1) none -- No multiple PPL owner warning is detected.
(2) detected -- Multiple RPL owner warning is detected.

Enumeration

Enumerated Values:

1	none
2	detected

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.32

erpsInstanceWtbTimer

Displays the value of the wait-to-block timer in ms
which is used by the RPL owner node when recovering from an
operator command (i.e. FS or MS).
This object will not take effect for a non RPL owner node.

Integer32

Constraints:
range: 5010-7000

.1.3.6.1.4.1.259.10.1.46.1.62.9.1.33

erpsPortStatisticsTable

table

.1.3.6.1.4.1.259.10.1.46.1.62.10 · 1 row entry · 25 columns

Open in standard view

Table for ERPS port statistics.

erpsPortStatisticsEntry entry .1.3.6.1.4.1.259.10.1.46.1.62.10.1

Entry for ERPS port statistics.

Indexes

erpsStatisticsInstanceIndex erpsStatsPortIndex

Column Syntax OID

erpsStatisticsInstanceIndex

Display statistics of either all ERP instances.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.1

erpsStatsPortIndex

This object indicates the port in an ERPS instance.
The value west(1) means the west ring port.
The value east(2) means the east ring port.

Enumeration

Enumerated Values:

1	west
2	east

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.2

erpsStatisticsLocalSfCount

Indicates the total number of
local SF events that occurred on this ring port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.3

erpsStatisticsLocalClrSfCount

Indicates the total number of
local Clear SF events that occurred on this ring port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.4

erpsStatisticsSentSfPkts

Indicates the total number of R-APS SF messages sent
via this ring port (not including the forwarded ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.5

erpsStatisticsSentNrPkts

Indicates the total number of R-APS NR messages sent
via this ring port (not including the forwarded ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.6

erpsStatisticsSentNrRbPkts

Indicates the total number of R-APS NR-RB messages sent
via this ring port (not including the forwarded ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.7

erpsStatisticsSentFsPkts

Indicates the total number of R-APS FS messages sent
via this ring port (not including the forwarded ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.8

erpsStatisticsSentMsPkts

Indicates the total number of R-APS MS messages sent
via this ring port (not including the forwarded ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.9

erpsStatisticsSentEventPkts

Indicates the total number of R-APS EVENT messages sent
via this ring port (not including the forwarded ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.10

erpsStatisticsSentHealthPkts

Indicates the total number of non-standard health-check
messages sent via this ring port
(not including the forwarded ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.11

erpsStatisticsRecvSfPkts

Indicates the total number of R-APS SF messages received
via this ring port (not including the ignored ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.12

erpsStatisticsRecvNrPkts

Indicates the total number of R-APS NR messages received
via this ring port (not including the ignored ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.13

erpsStatisticsRecvNrRbPkts

Indicates the total number of R-APS NR-RB messages received
via this ring port (not including the ignored ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.14

erpsStatisticsRecvFsPkts

Indicates the total number of R-APS FS messages received
via this ring port (not including the ignored ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.15

erpsStatisticsRecvMsPkts

Indicates the total number of R-APS MS messages received
via this ring port (not including the ignored ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.16

erpsStatisticsRecvEventPkts

Indicates the total number of R-APS EVENT messages received
via this ring port (not including the ignored ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.17

erpsStatisticsRecvHealthPkts

Indicates the total number of non-standard health-check
messages received via this ring port
(not including the ignored ones).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.18

erpsStatisticsIgnoreSfPkts

Indicates the total number of R-APS SF messages ignored
by this ring port because they have been timed out or
for other reasons.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.19

erpsStatisticsIgnoreNrPkts

Indicates the total number of R-APS NR messages ignored
by this ring port because they have been timed out or
for other reasons.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.20

erpsStatisticsIgnoreNrRbPkts

Indicates the total number of R-APS NR-RB messages ignored
by this ring port because they have been timed out or
for other reasons.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.21

erpsStatisticsIgnoreFsPkts

Indicates the total number of R-APS FS messages ignored
by this ring port because they have been timed out or
for other reasons.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.22

erpsStatisticsIgnoreMsPkts

Indicates the total number of R-APS MS messages ignored
by this ring port because they have been timed out or
for other reasons.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.23

erpsStatisticsIgnoreEventPkts

Indicates the total number of R-APS EVENT messages ignored
by this ring port because they have been timed out or
for other reasons.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.24

erpsStatisticsIgnoreHealthPkts

Indicates the total number of non-standard health-check
messages ignored by this ring port because they have been
timed out or for other reasons.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.62.10.1.25

lbdPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.63.2.1 · 1 row entry · 4 columns

Open in standard view

A table containing LBD configurations for all interfaces.

lbdPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.63.2.1.1

An instance containing the configuration of LBD at each
interface.

Indexes

lbdPortIfIndex

Column Syntax OID

lbdPortIfIndex

The ifIndex value of the port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.63.2.1.1.1

lbdPortAdminState

The LBD administrative port status.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.63.2.1.1.2

lbdPortOperState

The LBD operative port status.

Enumeration

Enumerated Values:

1	normal
2	looped

.1.3.6.1.4.1.259.10.1.46.1.63.2.1.1.3

lbdPortLoopedVlan

The list of VLANs on which loopback is detected. Only when
oper state is looped and mode is VLAN-based, the value is
nonzero.

OctetString

Constraints:
range: 0-512

.1.3.6.1.4.1.259.10.1.46.1.63.2.1.1.4

mvr6DomainTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.1 · 1 row entry · 6 columns

Open in standard view

The table for configuring the MVR port.

mvr6DomainEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.1.1

The entry for configuring the MVR Domain.

Indexes

mvr6DomainId

Column Syntax OID

mvr6DomainId

Speicfies which MVR domain to configure.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.66.1.1.1

mvr6DomainStatus

Parameter to enable or disable MVR(Multicast VLAN
Registration) on the device.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.66.1.1.2

mvr6DomainRunningStatus

Describes the running status of MVR (Multicast VLAN Registration)
on the switch. A value of active(1) indicates that all necessary
conditions in the MVR environment are satisfied. A value of inactive(2)
indicates that s…

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.259.10.1.46.1.66.1.1.3

mvr6DomainVlanId

To set VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB.

Q-BRIDGE-MIBVlanIndexr/w

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.66.1.1.4

mvr6DomainUpstreamSourceIpv6

Set the source IP address which MVR will carry in IP header when sending IGMP packet to upstream router
through MVR source port.

INET-ADDRESS-MIBInetAddressIPv6r/w

Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.259.10.1.46.1.66.1.1.5

mvr6DomainClearDynamicGroups

Clear dynamic learned groups

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.66.1.1.6

mvr6DomainPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.2 · 1 row entry · 6 columns

Open in standard view

The table for configuring the MVR port.

mvr6DomainPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.2.1

The entry for configuring the MVR port.

Indexes

mvr6PortDomainId mvr6DomainIfIndex

Column Syntax OID

mvr6PortDomainId

Speicfies which MVR domain to configure.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.66.2.1.1

mvr6DomainIfIndex

The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.66.2.1.2

mvr6DomainPortType

For configuring the MVR port type. To disable the MVR
port type, use none(0).

Enumerationr/w

Enumerated Values:

0	none
1	source
2	receiver

.1.3.6.1.4.1.259.10.1.46.1.66.2.1.3

mvr6DomainPortImmediateLeave

To enable immediate leave on MVR port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.66.2.1.4

mvr6DomainPortActive

To indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2).

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.259.10.1.46.1.66.2.1.5

mvr6DomainPortImmediateLeaveByHostIp

To enable immediate leave by host IP on MVR port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.66.2.1.6

mvr6DomainAssociatedProfileTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.4 · 1 row entry · 3 columns

Open in standard view

Configure MVR domain associate which MVR profile

mvr6DomainAssociatedProfileEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.4.1

The entry for configuring MVR domain associate MVR profile.

Indexes

mvr6ProfileDomainId mvr6ProfileId

Column Syntax OID

mvr6ProfileDomainId

Profile ID to index which MVR profile

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.66.4.1.1

mvr6ProfileId

Profile ID to index which MVR profile

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.46.1.66.4.1.2

mvr6ProfileAction

Set this object to create(1) to associate profile. Set this object
to destory(2) to deassociate profile. When
the action is complete, this object becomes noAction(0).

Enumerationr/w

Enumerated Values:

0	noAction
1	create
2	destory

.1.3.6.1.4.1.259.10.1.46.1.66.4.1.3

mvr6DomainGroupStaticTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.5 · 1 row entry · 4 columns

Open in standard view

The table for configuring the static members of the
MVR group.

mvr6DomainGroupStaticEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.5.1

The entry for configuring the static members of the
MVR group.

Indexes

mvr6GroupStaticDomainId mvr6DomainGroupStaticAddress mvr6DomainGroupStaticReceiverVlan

Column	Syntax	OID
mvr6GroupStaticDomainId Profile ID to index which MVR profile	Integer32 Constraints: `range: 1-5`	`.1.3.6.1.4.1.259.10.1.46.1.66.5.1.1`
mvr6DomainGroupStaticAddress The multicast address of the MVR group.	INET-ADDRESS-MIBInetAddressIPv6 Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.259.10.1.46.1.66.5.1.2`
mvr6DomainGroupStaticReceiverVlan The receiver vlan of this MVR group	Integer32 Constraints: `range: 1-4093`	`.1.3.6.1.4.1.259.10.1.46.1.66.5.1.3`
mvr6DomainGroupStaticPorts The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group.	Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.66.5.1.4`

mvr6DomainGroupCurrentTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.6 · 1 row entry · 4 columns

Open in standard view

The table for the current members of the MVR group.

mvr6DomainGroupCurrentEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.6.1

The entry for the current members of the MVR group.

Indexes

mvr6GroupCurrenDomainId mvr6DomainGroupCurrentAddress mvr6DomainGroupCurrentReceiverVlan

Column	Syntax	OID
mvr6GroupCurrenDomainId Profile ID to index which MVR profile	Integer32 Constraints: `range: 1-5`	`.1.3.6.1.4.1.259.10.1.46.1.66.6.1.1`
mvr6DomainGroupCurrentAddress The multicast address of the MVR group.	OctetString Constraints: `range: 1-47`	`.1.3.6.1.4.1.259.10.1.46.1.66.6.1.2`
mvr6DomainGroupCurrentReceiverVlan This object indicates the receiver VLAN of the MVR group.	Integer32 Constraints: `range: 1-4093`	`.1.3.6.1.4.1.259.10.1.46.1.66.6.1.3`
mvr6DomainGroupCurrentPorts The complete set of ports currently associated with this MVR group.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.46.1.66.6.1.4`

mvr6ProfileCtlTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.22.1 · 1 row entry · 3 columns

Open in standard view

The entry for configuring the MVR6 profile.

mvr6ProfileCtlEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.22.1.1

The entry for configuring the MVR6 profile.

Indexes

mvr6ProfileCtlId

Column Syntax OID

mvr6ProfileCtlId

Profile ID to index which MVR6 profile

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.46.1.66.22.1.1.1

mvr6ProfileName

MVR6 Profile name which identifies a group range.

NOTE: All mvr6ProfileCtlEntry use the same buffer to temporarily store the mvrProfileName before
mvr6ProfileCtlAction really creating the profile.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.46.1.66.22.1.1.2

mvr6ProfileCtlAction

Set this object to create(2) to create profile. Set this object
to destory(3) to delete profile. When
the action is complete, this object becomes noAction(1).

Enumerationr/w

Enumerated Values:

0	noAction
1	create
2	destory

.1.3.6.1.4.1.259.10.1.46.1.66.22.1.1.5

mvr6ProfileGroupCtlTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.22.2 · 1 row entry · 5 columns

Open in standard view

The entry for configuring the MVR group ranges for MVR6 profile.

mvr6ProfileGroupCtlEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.22.2.1

The entry for configuring the group ranges on MVR6 profile.

Indexes

mvr6ProfileGropuCtlProfileId mvr6ProfileGroupCtlId

Column Syntax OID

mvr6ProfileGropuCtlProfileId

Profile ID to index which MVR6 profile

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.46.1.66.22.2.1.1

mvr6ProfileGroupCtlId

Profile ID to index which group range in MVR6 profile

Integer32

Constraints:
range: 0-3

.1.3.6.1.4.1.259.10.1.46.1.66.22.2.1.2

mvr6ProfileGroupStartIPAddress

MVR Profile range start IP address.

NOTE: All Mvr6ProfileGroupCtlEntry use the same buffer to temporarily store the mvr6ProfileStartIPAddress before
mvr6ProfileGroupCtlAction really creating the group ran…

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.66.22.2.1.3

mvr6ProfileGroupEndIPAddress

MVR6 Profile range end IP address.

NOTE: All Mvr6ProfileGroupCtlEntry use the same buffer to temporarily store the mvr6ProfileEndIPAddress before
mvr6ProfileGroupCtlAction really creating the group range …

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.66.22.2.1.4

mvr6ProfileGroupCtlAction

Enumerationr/w

Enumerated Values:

0	noAction
1	create
2	destory

.1.3.6.1.4.1.259.10.1.46.1.66.22.2.1.5

mvr6PortStatisticsTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.26 · 1 row entry · 14 columns

Open in standard view

Table of Mvr6 statistics VLAN.

mvr6PortStatisticsEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.26.1

Entry of Mvr6 statistics VLAN.

Indexes

mvr6PortStatisticsDomainId mvr6PortStatisticsPortIndex

Column Syntax OID

mvr6PortStatisticsDomainId

The port and the trunk (excluding trunk members)
interface of the mvr6PortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MI…

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.1

mvr6PortStatisticsPortIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.2

mvr6PortStatisticsNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.3

mvr6PortStatisticsNumJoinSend

Number of join sent

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.4

mvr6PortStatisticsNumJoins

Number of join recieved

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.5

mvr6PortStatisticsNumJoinSuccess

Number of join group success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.6

mvr6PortStatisticsNumLeavesSend

Number of leave sent

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.7

mvr6PortStatisticsNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.8

mvr6PortStatisticsNumGeneralQuerySend

Number of general query sent.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.9

mvr6PortStatisticsNumGeneralQueryRecevied

Number of general query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.10

mvr6PortStatisticsNumSepcificQuerySend

Number of specific query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.11

mvr6PortStatisticsNumSpecificQueryReceived

Number of specific query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.12

mvr6PortStatisticsNumInvalidReport

Number of invalid report received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.13

mvr6PortStatisticsClearStatistics

Clear this VLAN all statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.66.26.1.14

mvr6VlanStatisticsTable

table

.1.3.6.1.4.1.259.10.1.46.1.66.27 · 1 row entry · 14 columns

Open in standard view

Table of Mvr6 statistics VLAN.

mvr6VlanStatisticsEntry entry .1.3.6.1.4.1.259.10.1.46.1.66.27.1

Entry of Mvr6 statistics VLAN.

Indexes

mvr6VlanStatisticsDomainId mvr6VlanStatisticsVlanId

Column Syntax OID

mvr6VlanStatisticsDomainId

domain ID

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.1

mvr6VlanStatisticsVlanId

VLAN ID

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.2

mvr6VlanStatisticsNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.3

mvr6VlanStatisticsNumJoinSend

Number of join sent.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.4

mvr6VlanStatisticsNumJoins

Number of join received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.5

mvr6VlanStatisticsNumJoinSuccess

Number of jion success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.6

mvr6VlanStatisticsNumLeavesSend

Number of leave sent.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.7

mvr6VlanStatisticsNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.8

mvr6VlanStatisticsNumGeneralQuerySend

Number of general query sent

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.9

mvr6VlanStatisticsNumGeneralQueryRecevied

Number of general query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.10

mvr6VlanStatisticsNumSepcificQuerySend

Number of specific query sent

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.11

mvr6VlanStatisticsNumSpecificQueryReceived

Number of sepcific query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.12

mvr6VlanStatisticsNumInvalidReport

Number of invalid report received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.13

mvr6VlanStatisticsClearStatistics

Clear this VLAN statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.46.1.66.27.1.14

ipv6RaGuardPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.67.1 · 1 row entry · 2 columns

Open in standard view

Table for IPv6 RA Guard port configuration.

ipv6RaGuardPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.67.1.1

Entry for IPv6 RA Guard port configuration.

Indexes

ipv6RaGuardPortIndex

Column Syntax OID

ipv6RaGuardPortIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.67.1.1.1

ipv6RaGuardPortStatus

A value of enabled (1) indicates that IPv6 RA Guard feature
is enabled on interfaces. A value of disabled (2) indicates
that the feature is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.67.1.1.2

udldPortTable

table

.1.3.6.1.4.1.259.10.1.46.1.69.2 · 1 row entry · 8 columns

Open in standard view

Table for port configuration of UDLD.

udldPortEntry entry .1.3.6.1.4.1.259.10.1.46.1.69.2.1

Entry for port configuration of UDLD.

Indexes

udldPortIndex

Column Syntax OID

udldPortIndex

The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.69.2.1.1

udldPortStatus

This parameter is used to enable/disable UDLD
on this interface.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.69.2.1.2

udldPortAggressiveStatus

This parameter is used to enable/disable aggressive mode of
UDLD on this interface.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.69.2.1.3

udldPortOperState

The operational state of UDLD on this interface.

Enumeration

Enumerated Values:

1	disabled
2	linkDown
3	linkUp
4	advertisement
5	detection
6	disabledPort

.1.3.6.1.4.1.259.10.1.46.1.69.2.1.4

udldPortPortState

The port state of UDLD on this interface.

Enumeration

Enumerated Values:

1	unknown
2	neighborsEchoIsEmpty
3	bidirectional
4	mismatchWithneighborStateReported
5	transmitToReceiveLoop
6	unidirectional
7	aggressiveModeFailure

.1.3.6.1.4.1.259.10.1.46.1.69.2.1.5

udldPortOperMessageInterval

The operational message interval (in seconds) used by UDLD
on this interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.69.2.1.6

udldPortOperTimeout

The operational timeout interval (in seconds) used by UDLD
to decide the basic length of the detection phase on
this interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.69.2.1.7

udldPortNeighborDevCount

The total number of neighbor devices discovered on this
interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.69.2.1.8

udldPortNeighborDevTable

table

.1.3.6.1.4.1.259.10.1.46.1.69.3 · 1 row entry · 9 columns

Open in standard view

Table of neighbor devices discovered by UDLD
for each interface.

udldPortNeighborDevEntry entry .1.3.6.1.4.1.259.10.1.46.1.69.3.1

A conceptual row containing the information
of a neighbor device.

Indexes

udldPortNeighborDevPortIndex udldPortNeighborDevIndex

Column Syntax OID

udldPortNeighborDevPortIndex

The port (excluding trunk and trunk members)
interface of the portTable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.1

udldPortNeighborDevIndex

A 32-bit integer uniquely identifying the nieghbor device
discovered by UDLD on a port interface.

Integer32

Constraints:
range: 1-500

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.2

udldPortNeighborDevDevID

The device ID of this neighbor device.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.3

udldPortNeighborDevPortID

The port ID of this neighbor device.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.4

udldPortNeighborDevDevName

The device name of this neighbor device.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.5

udldPortNeighborDevNeighborState

The neighbor state of this neighbor device.

Enumeration

Enumerated Values:

1	unknown
2	neighborsEchoIsEmpty
3	bidirectional
4	mismatchWithneighborStateReported
5	unidirectional

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.6

udldPortNeighborDevExpire

The amount of time remaining (in seconds) before this
entry should expire. Whenever this period expires,
this entry will be removed.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.7

udldPortNeighborDevMessageInterval

The message interval (in seconds) of this neighbor device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.8

udldPortNeighborDevTimeout

The timeout interval (in seconds) of this neighbor device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.46.1.69.3.1.9

dhcpv6SnoopVlanConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.71.2.1 · 1 row entry · 2 columns

Open in standard view

A table contains DHCPv6 Snooping configurations of existing VLANs.

dhcpv6SnoopVlanConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.71.2.1.1

An instance contains the configuration to enable
or disable DHCPv6 Snooping at each existing VLAN.

Indexes

dhcpv6SnoopVlanIndex

Column Syntax OID

dhcpv6SnoopVlanIndex

This object indicates the VLAN ID on which DHCPv6 Snooping
feature is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.71.2.1.1.1

dhcpv6SnoopVlanEnable

This object indicates whether DHCPv6 Snooping is enabled in
this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.71.2.1.1.2

dhcpv6SnoopPortConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.71.3.1 · 1 row entry · 4 columns

Open in standard view

A table provides the mechanism to configure the trust
state of each port or trunk for DHCPv6 Snooping purpose.

dhcpv6SnoopPortConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.71.3.1.1

An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCPv6 Snooping purpose.

Indexes

dhcpv6SnoopPortIfIndex

Column Syntax OID

dhcpv6SnoopPortIfIndex

The ifIndex value of the port or trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.71.3.1.1.1

dhcpv6SnoopPortTrustEnable

This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.71.3.1.1.2

dhcpv6SnoopPortMaxBinding

The maximum number of binding entries of the port or trunk

Integer32r/w

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.71.3.1.1.3

dhcpv6SnoopPortCurrentBinding

The number of dynamic binding entrires learned on the port or trunk.

Integer32

Constraints:
range: 0-5

.1.3.6.1.4.1.259.10.1.46.1.71.3.1.1.4

dhcpv6SnoopBindingTable

table

.1.3.6.1.4.1.259.10.1.46.1.71.4.1 · 1 row entry · 7 columns

Open in standard view

A table contains the DHCPv6 binding entries information
learned by the device.

dhcpv6SnoopBindingEntry entry .1.3.6.1.4.1.259.10.1.46.1.71.4.1.1

An instance contains the link-layer address, ia type,
ia id, IPv6 address, VLAN number, interface number, lifetime.

Indexes

dhcpv6SnoopBindingLinkLayerAddress dhcpv6SnoopBindingIaType dhcpv6SnoopBindingIaId dhcpv6SnoopBindingIpv6Address

Column Syntax OID

dhcpv6SnoopBindingLinkLayerAddress

This object indicates the link-layer address of a DHCPv6
client host.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.71.4.1.1.1

dhcpv6SnoopBindingIaType

This object indicates the IPv6 address ia type of a DHCPv6
client host. na - Non-temporary address, ta - temporary address

Enumeration

Enumerated Values:

3	na
4	ta

.1.3.6.1.4.1.259.10.1.46.1.71.4.1.1.2

dhcpv6SnoopBindingIaId

This object indicates the IPv6 address ia id of a DHCPv6
client host.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.71.4.1.1.3

dhcpv6SnoopBindingIpv6Address

This object indicates the IPv6 address of a DHCPv6
client host.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.46.1.71.4.1.1.4

dhcpv6SnoopBindingVlanIndex

This object indicates the VLAN which a DHCPv6 client host
belongs to.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.71.4.1.1.5

dhcpv6SnoopBindingPortIfIndex

This object indicates the port or trunk where a DHCPv6 client
host connects to.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.71.4.1.1.6

dhcpv6SnoopBindingLifeTime

This object indicates the life time of this DHCPv6
binding.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.46.1.71.4.1.1.7

ip6SrcGuardConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.74.1 · 1 row entry · 3 columns

Open in standard view

A table contains the configurations to set
IPv6 Source Guard at each port.

ip6SrcGuardConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.74.1.1

An instance contains the configuration to set
IPv6 Source Guard at each port.

Indexes

ip6SrcGuardPortIfIndex

Column Syntax OID

ip6SrcGuardPortIfIndex

This object idents the port which is capable of
IPv6 Source Guard feature.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.74.1.1.1

ip6SrcGuardMode

This object indicates whether IPv6 Source Guard is enabled
at this interface. If the value equals 1, it means IPv6 Source
Guard is disabled. If the value equals 2, it means IPv6 Source
Guard is enabled, and packets are…

Enumerationr/w

Enumerated Values:

1	disabled
2	srcIp

.1.3.6.1.4.1.259.10.1.46.1.74.1.1.2

ip6SrcGuardMaxBinding

This object indicates the maximum number of bindings associated with the port.

Integer32r/w

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.74.1.1.3

ip6SrcGuardAddrTable

table

.1.3.6.1.4.1.259.10.1.46.1.74.2 · 1 row entry · 6 columns

Open in standard view

A table contains the IPv6 Source Guard bindings information
learnt by the device or configured by the user.

ip6SrcGuardAddrEntry entry .1.3.6.1.4.1.259.10.1.46.1.74.2.1

An instance contains the Mac address, binding type,
IPv6 address, VLAN id, interface id, and status.

Indexes

ip6SrcGuardBindingType ip6SrcGuardBindingMacAddress ip6SrcGuardBindingIpv6Address

Column Syntax OID

ip6SrcGuardBindingType

This object indicates the binding type of the associated client.

Enumeration

Enumerated Values:

1	static
2	dhcp6snp
3	ndsnp

.1.3.6.1.4.1.259.10.1.46.1.74.2.1.1

ip6SrcGuardBindingMacAddress

This object indicates the MAC address of the associated client.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.46.1.74.2.1.2

ip6SrcGuardBindingIpv6Address

This object indicates the IPv6 address of the associated client.

INET-ADDRESS-MIBInetAddressIPv6

Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.259.10.1.46.1.74.2.1.3

ip6SrcGuardBindingVlanIndex

This object indicates the VLAN id of the associated client.

Q-BRIDGE-MIBVlanIndexr/w

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.74.2.1.4

ip6SrcGuardBindingPortIfIndex

This object indicates the port of the associated client.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.74.2.1.5

ip6SrcGuardBindingStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.46.1.74.2.1.6

ndSnoopVlanConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.80.2.1 · 1 row entry · 2 columns

Open in standard view

A table contains ND Snooping configurations of existing VLANs.

ndSnoopVlanConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.80.2.1.1

An instance contains the configuration to enable
or disable ND Snooping at each existing VLAN.

Indexes

ndSnoopVlanIndex

Column Syntax OID

ndSnoopVlanIndex

This object indicates the VLAN ID on which ND Snooping
feature is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.46.1.80.2.1.1.1

ndSnoopVlanEnable

This object indicates whether ND Snooping is enabled in
this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.80.2.1.1.2

ndSnoopPortConfigTable

table

.1.3.6.1.4.1.259.10.1.46.1.80.3.1 · 1 row entry · 4 columns

Open in standard view

A table provides the mechanism to configure the trust
state of each port or trunk for ND Snooping purpose.

ndSnoopPortConfigEntry entry .1.3.6.1.4.1.259.10.1.46.1.80.3.1.1

An instance contains the configuration to enable or disable
trust state of each port or trunk for ND Snooping purpose.

Indexes

ndSnoopPortIfIndex

Column Syntax OID

ndSnoopPortIfIndex

The ifIndex value of the port or trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.46.1.80.3.1.1.1

ndSnoopPortTrustEnable

This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.46.1.80.3.1.1.2

ndSnoopPortMaxBinding

The maximum number of binding entries of the port or trunk

Integer32r/w

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.46.1.80.3.1.1.3

ndSnoopPortCurrentBinding

The number of dynamic binding entrires learned on the port or trunk.

Integer32

Constraints:
range: 0-5

.1.3.6.1.4.1.259.10.1.46.1.80.3.1.1.4

ndSnoopBindingTable

table

.1.3.6.1.4.1.259.10.1.46.1.80.4.1 · 1 row entry · 5 columns

Open in standard view

A table contains the ND binding entries information
learned by the device.

ndSnoopBindingEntry entry .1.3.6.1.4.1.259.10.1.46.1.80.4.1.1

An instance contains the link-layer address, ia type,
ia id, IPv6 address, VLAN number, interface number, lifetime.

Indexes

ndSnoopBindingLinkLayerAddress ndSnoopBindingIpv6Address ndSnoopBindingVlanIndex

Column	Syntax	OID
ndSnoopBindingLinkLayerAddress This object indicates the link-layer address of a ND client host.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.259.10.1.46.1.80.4.1.1.1`
ndSnoopBindingIpv6Address This object indicates the IPv6 address of a ND client host.	INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.259.10.1.46.1.80.4.1.1.2`
ndSnoopBindingVlanIndex This object indicates the VLAN which a ND client host belongs to.	Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex `Unsigned32`	`.1.3.6.1.4.1.259.10.1.46.1.80.4.1.1.3`
ndSnoopBindingPortIfIndex This object indicates the port or trunk where a ND client host connects to.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.80.4.1.1.4`
ndSnoopBindingLifeTime This object indicates the life time of this ND binding.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.80.4.1.1.5`

ndSnoopPrefixTable

table

.1.3.6.1.4.1.259.10.1.46.1.80.5.1 · 1 row entry · 6 columns

Open in standard view

A table contains the ND Prefix entries information
learned by the device.

ndSnoopPrefixEntry entry .1.3.6.1.4.1.259.10.1.46.1.80.5.1.1

An instance contains the link-layer address, ia type,
ia id, IPv6 address, VLAN number, interface number, lifetime.

Indexes

ndSnoopPrefixIpv6Address ndSnoopPrefixPreflen ndSnoopPrefixVlanIndex

Column	Syntax	OID
ndSnoopPrefixIpv6Address This object indicates the IPv6 address of a ND client host.	INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.259.10.1.46.1.80.5.1.1.1`
ndSnoopPrefixPreflen This object indicates the Preflen of a ND Prefix Entry	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.80.5.1.1.2`
ndSnoopPrefixVlanIndex This object indicates the VLAN of a ND Prefix Entry	Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex `Unsigned32`	`.1.3.6.1.4.1.259.10.1.46.1.80.5.1.1.3`
ndSnoopPrefixPortIfIndex This object indicates the port or trunk of a ND Prefix Entry	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.46.1.80.5.1.1.4`
ndSnoopPrefixValidTime This object indicates the valid time of this ND Prefix.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.80.5.1.1.5`
ndSnoopPrefixLifeTime This object indicates the life time of this ND Prefix.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.46.1.80.5.1.1.6`