erpsInstanceMajorRingIndex

ECS4100-MIB · .1.3.6.1.4.1.259.10.1.46.1.62.9.1.11
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
An index that uniquely identifies an entry in the
erpsInstanceTable. A value of 0 means this instance has no major
ring.
Notes: This objest can not be configured if erpsRingEastPort of
associted physical ring of this instance has a vaule other than 0.

Context

MIB
ECS4100-MIB
OID
.1.3.6.1.4.1.259.10.1.46.1.62.9.1.11
Type
column
Access
readwrite
Status
current
Parent
erpsInstanceEntry
Table
erpsInstanceTable
Siblings
31

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
erpsInstanceIndex
An index that uniquely identifies an entry in the erpsInstanceTable.
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.1
erpsInstanceEastMepId
Configures a CFM Down MEP on east ring port. A down MEP can be uniquely select by given a MEPID, instance's MEG level, and instance's control VLAN ID. A value of 0 means no east M…
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.10
erpsInstancePropagateTC
Set to enabled(1) to transmit topology change signal to the major ring. It will not take effect if erpsInstanceMajorRingIndex doesn't designated.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.12
erpsInstanceNonRevertive
For each instances of a ring is configured independently; as a result of that, the recovery mechanism is invoked separately for each instance according to its own configuration of…
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.14
erpsInstanceRapsDefMac
Set to enabled(1) to use R-APS default MAC. If this configuration enabled then R-APS default MAC 01-19-A7-00-00-01 shall be used as destination address for the R-APS PDUs.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.15
erpsInstanceRapsWithoutVc
Set to enabled(1) To specify the ERP instance as a sbu ring without virtual channel.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.16
erpsInstanceVersion
Set to v2(2) to enable ERPS v2 operation.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.17
erpsInstanceInclusionVlan
A bitmap of VLAN groups lists a set of VLAN group IDs protected by this instance. Inclusion-vlan command is mandatory for each ERP instance while exclusion-vlan command is optiona…
columnOctetString.1.3.6.1.4.1.259.10.1.46.1.62.9.1.18
erpsInstancePhysicalRingIndex
An index that uniquely identifies an entry in the erpsRingTable. Associates the ERP instance to a physical ring.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.19
erpsInstanceName
Configures a instance and specifies name for the instance.
columnOctetString.1.3.6.1.4.1.259.10.1.46.1.62.9.1.2
erpsInstanceForcedSwitch
Set to west(2) to perform the forced switch command on west ring port of specified Instance. Set to east(3) to perform the forced switch command on east ring port of specified Ins…
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.20
erpsInstanceManualSwitch
Set to west(2) to perform the manual switch command on west ring port of specified Instance. Set to east(3) to perform the manual switch command on east ring port of specified Ins…
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.21
erpsInstanceClear
Set to clear(1) to perform the clear command on specified Instance. The value noClear(2) will always be displayed when reading.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.22
erpsInstanceClearStatisticsAction
This variable is used to clear the counters of specified instance. Set to clear(1) to perform the clear operation. The value noClear(2) will always be displayed when reading.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.23
erpsInstanceRowStatus
The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1).
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.259.10.1.46.1.62.9.1.24
erpsInstanceNodeState
This value displays the node's current state. It displays one of the following states (1) init -- The node is in the init state. (The node state will stay in init state …
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.25
erpsInstanceWestRingPortState
This value displays the west ring port's current state. It displays one of the following states (1) unknown -- The port's current state is unknown. (The port's current state w…
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.26
erpsInstanceEastRingPortState
This value displays the east ring port's current state. It displays one of the following states (1) unknown -- The port's current state is unknown. (The port's current state w…
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.27
erpsInstanceWtrExpire
Displays the time remaining in seconds until the wait-to-restore timer countdown expires. A value of 0 means no countdown is running.
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.28
erpsInstanceWtbExpire
Displays the time remaining in ms until the wait-to-block timer countdown expires. A value of 0 means no countdown is running.
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.29
erpsInstanceMegLevel
Configures the maintenance entity group (MEG) level which is used to provide a communication channel for instance automatic protection switching (R-APS) information.
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.3
erpsInstanceWestRingPortSf
This value displays the west ring port's current SF state. It displays one of the following states (1) none -- No SF is detected. (2) detected -- SF is detected.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.30
erpsInstanceEastRingPortSf
This value displays the east ring port's current SF state. It displays one of the following states (1) none -- No SF is detected. (2) detected -- SF is detected.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.31
erpsInstanceMultiRplOwnerWarn
This value displays the multiple PPL owner warning state. It displays one of the following states (1) none -- No multiple PPL owner warning is detected. (2) detected -- Multiple R…
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.32
erpsInstanceWtbTimer
Displays the value of the wait-to-block timer in ms which is used by the RPL owner node when recovering from an operator command (i.e. FS or MS). This object will not take effect …
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.33
erpsInstanceControlVlanID
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Configures one control VLAN for each ERPS instance. The control VLAN is used only to send and receive ERPS message. A contro…
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.4
erpsInstanceRplType
Set to none(1) to make this node act as a normal node. Set to owner(2) to make this node act as an RPL owner. Set to neighbor(3) to make this node act as an RPL neighbor.
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.62.9.1.5
erpsInstanceWtrTimer
Configures the value of the wait-to-restore timer which is used by the RPL owner node to prevent frequent switching operations that may be caused by intermittent failures. The ran…
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.6
erpsInstanceGuardTimer
Configures the value of the guard timer which is used to prevent instance nodes from receiving outdated R-APS messages. The range is in 10 ms steps between 10 ms and 2 seconds, wi…
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.7
erpsInstanceHoldoffTimer
Configures the value of the holdoff timer which is used to prevent reporting error event immediately to protection switching if the provisioned holdoff timer value is non-zero. Th…
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.8
erpsInstanceWestMepId
Configures a CFM Down MEP on west ring port. A down MEP can be uniquely select by given a MEPID, instance's MEG level, and instance's control VLAN ID. A value of 0 means no west M…
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.62.9.1.9