staPortAdminPointToPoint

ECS4100-MIB · .1.3.6.1.4.1.259.10.1.46.1.5.2.1.6
MIB view Table view

Object

column r/w Enumeration 
The administrative point-to-point status of the LAN segment
attached to this port.  A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link.  A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection.  A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means.

Context

MIB
ECS4100-MIB
OID
.1.3.6.1.4.1.259.10.1.46.1.5.2.1.6
Type
column
Access
readwrite
Status
current
Parent
staPortEntry
Table
staPortTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
0forceTrue
1forceFalse
2auto

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
staPortLongAdminPathCost
The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which inc…
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.5.2.1.10
staPortLongOperPathCost
The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which incl…
columnInteger32.1.3.6.1.4.1.259.10.1.46.1.5.2.1.11
staPortBpduFlooding
This parameter is used to configure the capability of BPDUs flooding.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.46.1.5.2.1.12
staPortBpduGuard
A value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.46.1.5.2.1.15
staPortAdminEdgePortWithAuto
The administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) indicates that this por…
columnEnumeration.1.3.6.1.4.1.259.10.1.46.1.5.2.1.16
staPortBpduFilter
The administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value of disabled(2) indic…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.46.1.5.2.1.17
staPortRootGuardStatus
Specifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.46.1.5.2.1.18
staPortBpduGuardAutoRecovery
A value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.46.1.5.2.1.19
staPortBpduGuardAutoRecoveryInterval
The interval in seconds used by BPDU guard auto recovery mechanism.
columnUnsigned32.1.3.6.1.4.1.259.10.1.46.1.5.2.1.20
staPortTcPropStop
Stop topology change progate on this ifindex. Don't enable on potentially ring port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.46.1.5.2.1.21
staPortRestrictedTcn
When enabled, received topology change notifications or topology changes are not propagated to other ports.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.46.1.5.2.1.22
staPortProtocolMigration
When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always ret…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.46.1.5.2.1.3
staPortOperEdgePort
The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.46.1.5.2.1.5
staPortOperPointToPoint
The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value i…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.46.1.5.2.1.7
staPortSystemStatus
Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.10.1.46.1.5.2.1.9