DOT12-RPTR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

vgRptrInfoTable

table

.1.3.6.1.2.1.53.1.1.1.1 · 1 row entry · 9 columns

Open in standard view

A table of information about each 802.12 repeater
in the managed system.

vgRptrInfoEntry entry .1.3.6.1.2.1.53.1.1.1.1.1

An entry in the table, containing information
about a single repeater.

Indexes

vgRptrInfoIndex

Column Syntax OID

vgRptrInfoIndex

A unique identifier for the repeater for which
this entry contains information. The numbering
scheme for repeaters is implementation specific.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.2.1.53.1.1.1.1.1.1

vgRptrInfoMACAddress

The MAC address used by the repeater when it
initiates training on the uplink port. Repeaters
are allowed to train with an assigned MAC address

or a null (all zeroes) MAC address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.2.1.53.1.1.1.1.1.2

vgRptrInfoCurrentFramingType

The type of framing (802.3 or 802.5) currently
in use by the repeater.

Enumeration

Enumerated Values:

1	frameType88023
2	frameType88025

.1.3.6.1.2.1.53.1.1.1.1.1.3

vgRptrInfoDesiredFramingType

The type of framing which will be used by the
repeater after the next time it is reset.

The value of this object should be preserved
across repeater resets and power failures.

Enumerationr/w

Enumerated Values:

1	frameType88023
2	frameType88025

.1.3.6.1.2.1.53.1.1.1.1.1.4

vgRptrInfoFramingCapability

The type of framing this repeater is capable of
supporting.

Enumeration

Enumerated Values:

1	frameType88023
2	frameType88025
3	frameTypeEither

.1.3.6.1.2.1.53.1.1.1.1.1.5

vgRptrInfoTrainingVersion

The highest version bits (vvv bits) supported by
the repeater during training.

Integer32

Constraints:
range: 0-7

.1.3.6.1.2.1.53.1.1.1.1.1.6

vgRptrInfoOperStatus

The vgRptrInfoOperStatus object indicates the
operational state of the repeater.

Enumeration

Enumerated Values:

1	other
2	ok
3	generalFailure

.1.3.6.1.2.1.53.1.1.1.1.1.7

vgRptrInfoReset

Setting this object to reset(2) causes the
repeater to transition to its initial state as
specified in clause 12 [IEEE Std 802.12].

Setting this object to noReset(1) has no effect.
The agent will always r…

Enumerationr/w

Enumerated Values:

1	noReset
2	reset

.1.3.6.1.2.1.53.1.1.1.1.1.8

vgRptrInfoLastChange

The value of sysUpTime when any of the following
conditions occurred:

1) agent cold- or warm-started;
2) this instance of repeater was created
(such as when a device or module was
ad…

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.2.1.53.1.1.1.1.1.9

vgRptrBasicGroupTable

table

.1.3.6.1.2.1.53.1.1.2.1 · 1 row entry · 5 columns

Open in standard view

A table containing information about groups of
ports.

vgRptrBasicGroupEntry entry .1.3.6.1.2.1.53.1.1.2.1.1

An entry in the vgRptrBasicGroupTable, containing
information about a single group of ports.

Indexes

vgRptrGroupIndex

Column Syntax OID

vgRptrGroupIndex

This object identifies the group within the
system for which this entry contains information.
The numbering scheme for groups is implementation
specific.

Integer32

Constraints:
range: 1-2146483647

.1.3.6.1.2.1.53.1.1.2.1.1.1

vgRptrGroupObjectID

The vendor's authoritative identification of the
group. This value may be allocated within the
SMI enterprises subtree (1.3.6.1.4.1) and
provides a straight-forward and unambiguous means
for determining what kind of gr…

ObjectIdentifier

.1.3.6.1.2.1.53.1.1.2.1.1.2

vgRptrGroupOperStatus

An object that indicates the operational status
of the group.

A status of notPresent(4) indicates that the
group is temporarily or permanently physically
and/or logically not a part of the system. It
is …

Enumeration

Enumerated Values:

1	other
2	operational
3	malfunctioning
4	notPresent
5	underTest
6	resetInProgress

.1.3.6.1.2.1.53.1.1.2.1.1.3

vgRptrGroupPortCapacity

The vgRptrGroupPortCapacity is the number of
ports that can be contained within the group.
Valid range is 1-2147483647. Within each group,
the ports are uniquely numbered in the range from
1 to vgRptrGroupPortCapacity.…

Integer32

Constraints:
range: 1-2146483647

.1.3.6.1.2.1.53.1.1.2.1.1.4

vgRptrGroupCablesBundled

This object is used to indicate whether there are
any four-pair UTP links connected to this group
that are contained in a cable bundle with multiple
four-pair groups (e.g. a 25-pair bundle). Bundled
cable may only be u…

Enumerationr/w

Enumerated Values:

1	someCablesBundled
2	noCablesBundled

.1.3.6.1.2.1.53.1.1.2.1.1.5

vgRptrBasicPortTable

table

.1.3.6.1.2.1.53.1.1.3.1 · 1 row entry · 11 columns

Open in standard view

A table containing configuration and status
information about 802.12 repeater ports in the
system.  The number of entries is independent of
the number of repeaters in the managed system.

vgRptrBasicPortEntry entry .1.3.6.1.2.1.53.1.1.3.1.1

An entry in the vgRptrBasicPortTable, containing
information about a single port.

Indexes

vgRptrGroupIndex vgRptrPortIndex

Column Syntax OID

vgRptrPortIndex

This object identifies the port within the group
for which this entry contains information. This
identifies the port independently from the
repeater it may be attached to. The numbering
scheme for ports is implementat…

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.2.1.53.1.1.3.1.1.1

vgRptrPortType

Describes the type of port. One of the
following:

cascadeExternal - Port is an uplink with
physical connections which
are externally visible
cascadeInt…

Enumeration

Enumerated Values:

1	cascadeExternal
2	cascadeInternal
3	localExternal
4	localInternal

.1.3.6.1.2.1.53.1.1.3.1.1.2

vgRptrPortAdminStatus

Port enable/disable function. Enabling a
disabled port will cause training to be
initiated by the training initiator (the slave
mode device) on the link. Setting this object to
disabled(2) disables the port.
…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.2.1.53.1.1.3.1.1.3

vgRptrPortOperStatus

Current status for the port as specified by the
PORT_META_STATE in the port process module of
clause 12 [IEEE Std 802.12].

During initialization or any link warning
conditions, vgRptrPortStatus will be
'i…

Enumeration

Enumerated Values:

1	active
2	inactive
3	training

.1.3.6.1.2.1.53.1.1.3.1.1.4

vgRptrPortSupportedPromiscMode

This object describes whether the port hardware
is capable of supporting promiscuous mode, single
address mode (i.e., repeater filters unicasts not
addressed to the end station attached to this
port), or both. A port f…

Enumeration

Enumerated Values:

1	singleModeOnly
2	singleOrPromiscMode
3	promiscModeOnly

.1.3.6.1.2.1.53.1.1.3.1.1.5

vgRptrPortSupportedCascadeMode

This object describes whether the port hardware
is capable of supporting cascaded repeaters, end
nodes, or both. A port for which vgRptrPortType
is equal to 'cascadeInternal' or
'cascadeExternal' will always have a val…

Enumeration

Enumerated Values:

1	endNodesOnly
2	endNodesOrRepeaters
3	cascadePort

.1.3.6.1.2.1.53.1.1.3.1.1.6

vgRptrPortAllowedTrainType

This security object is set by the network
manager to configure what type of device is
permitted to connect to the port. One of the
following values:

allowEndNodesOnly - only non-
…

Enumerationr/w

Enumerated Values:

1	allowEndNodesOnly
2	allowPromiscuousEndNodes
3	allowEndNodesOrRepeaters
4	allowAnything

.1.3.6.1.2.1.53.1.1.3.1.1.7

vgRptrPortLastTrainConfig

This object is a 16 bit field. For local ports,
this object contains the requested configuration
field from the most recent error-free training
request frame sent by the device connected to
the port. For cascade ports…

OctetString

Constraints:
range: 2-2

.1.3.6.1.2.1.53.1.1.3.1.1.8

vgRptrPortTrainingResult

This 18 bit field is used to indicate the result
of training. It contains two bits which indicate
if error-free training frames have been received,
and it also contains the 16 bits of the allowed
configuration field fr…

OctetString

Constraints:
range: 3-3

.1.3.6.1.2.1.53.1.1.3.1.1.9

vgRptrPortPriorityEnable

A configuration flag used to determine whether
the repeater will service high priority requests
received on the port as high priority or normal
priority. When 'false', high priority requests

on this port…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.2.1.53.1.1.3.1.1.10

vgRptrPortRptrInfoIndex

This object identifies the repeater that this
port is currently mapped to. The repeater
identified by a particular value of this object
is the same as that identified by the same value
of vgRptrInfoIndex. A value of z…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.2.1.53.1.1.3.1.1.11

vgRptrMonitorTable

table

.1.3.6.1.2.1.53.1.2.1.1 · 1 row entry · 5 columns

Open in standard view

A table of performance and error statistics for
each repeater in the system.  The instance of the
vgRptrInfoLastChange associated with a repeater
is used to indicate possible discontinuities of
the counters in this table that are associated
with the same repeater.

vgRptrMonitorEntry entry .1.3.6.1.2.1.53.1.2.1.1.1

An entry in the table, containing statistics
for a single repeater.

Indexes

vgRptrInfoIndex

Column	Syntax	OID
vgRptrMonTotalReadableFrames The total number of good frames of valid frame length that have been received on all ports in this repeater. If an implementation cannot obtain a count of frames as seen by the repeater itself, this counter may be impl…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.1.1.1.1`
vgRptrMonTotalReadableOctets The total number of octets contained in good frames that have been received on all ports in this repeater. If an implementation cannot obtain a count of octets as seen by the repeater itself, this counte…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.1.1.1.2`
vgRptrMonReadableOctetRollovers The total number of times that the associated instance of the vgRptrMonTotalReadableOctets counter has rolled over. This two-counter mechanism is provided for those network management protocols that do no…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.1.1.1.3`
vgRptrMonHCTotalReadableOctets The total number of octets contained in good frames that have been received on all ports in this repeater. If an implementation cannot obtain a count of octets as seen by the repeater itself, this counter may be implem…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.2.1.53.1.2.1.1.1.4`
vgRptrMonTotalErrors The total number of errors which have occurred on all of the ports in this repeater. If an implementation cannot obtain a count of these errors as seen by the repeater itself, this counter may be implemented as the sum…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.1.1.1.5`

vgRptrMonPortTable

table

.1.3.6.1.2.1.53.1.2.3.1 · 1 row entry · 24 columns

Open in standard view

A table of performance and error statistics for
the ports.  The columnar object
vgRptrPortLastChange is used to indicate possible
discontinuities of counter type columnar objects
in this table.

vgRptrMonPortEntry entry .1.3.6.1.2.1.53.1.2.3.1.1

An entry in the vgRptrMonPortTable, containing
performance and error statistics for a single
port.

Indexes

vgRptrGroupIndex vgRptrPortIndex

Column	Syntax	OID
vgRptrPortReadableFrames This object is the number of good frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on the port which is not counted by any of the following e…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.1`
vgRptrPortReadableOctets This object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.2`
vgRptrPortReadOctetRollovers This object is a count of the number of times that the associated instance of the vgRptrPortReadableOctets counter has rolled over. This two-counter mechanism is provided for those network management prot…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.3`
vgRptrPortHCReadableOctets This object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to …	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.2.1.53.1.2.3.1.1.4`
vgRptrPortUnreadableOctets This object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by vgRptr…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.5`
vgRptrPortUnreadOctetRollovers This object is a count of the number of times that the associated instance of the vgRptrPortUnreadableOctets counter has rolled over. This two-counter mechanism is provided for those network management pr…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.6`
vgRptrPortHCUnreadableOctets This object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by vgRptr…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.2.1.53.1.2.3.1.1.7`
vgRptrPortHighPriorityFrames This object is a count of high priority frames that have been received on this port. This counter is incremented by one for each high priority frame received on this port. This counter includes both good and bad high …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.8`
vgRptrPortHighPriorityOctets This object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.9`
vgRptrPortHighPriOctetRollovers This object is a count of the number of times that the associated instance of the vgRptrPortHighPriorityOctets counter has rolled over. This two-counter mechanism is provided for those network management …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.10`
vgRptrPortHCHighPriorityOctets This object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by …	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.2.1.53.1.2.3.1.1.11`
vgRptrPortNormPriorityFrames This object is a count of normal priority frames that have been received on this port. This counter is incremented by one for each normal priority frame received on this port. This counter includes both good and bad no…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.12`
vgRptrPortNormPriorityOctets This object is a count of the number of octets contained in normal priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted b…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.13`
vgRptrPortNormPriOctetRollovers This object is a count of the number of times that the associated instance of the vgRptrPortNormPriorityOctets counter has rolled over. This two-counter mechanism is provided for those network management …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.14`
vgRptrPortHCNormPriorityOctets This object is a count of the number of octets contained in normal priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port whi…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.2.1.53.1.2.3.1.1.15`
vgRptrPortBroadcastFrames This object is a count of broadcast packets that have been received on this port. This counter is incremented by one for each readable frame received on this port whose destination MAC address is the broadcast address.…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.16`
vgRptrPortMulticastFrames This object is a count of multicast packets that have been received on this port. This counter is incremented by one for each readable frame received on this port whose destination MAC address has the group address bit…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.17`
vgRptrPortNullAddressedFrames This object is a count of null addressed packets that have been received on this port. This counter is incremented by one for each frame received on this port with a destination MAC address consisting of all zero bits.…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.18`
vgRptrPortIPMFrames This object is a count of the number of frames that have been received on this port with an invalid packet marker and no PMI errors. A repeater will write an invalid packet marker to the end of a frame containing error…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.19`
vgRptrPortOversizeFrames This object is a count of oversize frames received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is larger than the maximum legal frame size. The …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.20`
vgRptrPortDataErrorFrames This object is a count of errored frames received on this port. This counter is incremented by one for each frame received on this port with any of the following errors: bad FCS (with no IPM), PMI errors (excluding fra…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.21`
vgRptrPortPriorityPromotions This counter is incremented by one each time the priority promotion timer has expired on this port and a normal priority frame is priority promoted. This counter may experience a discontinuity when the va…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.22`
vgRptrPortTransitionToTrainings This counter is incremented by one each time the vgRptrPortStatus object for this port transitions into the 'training' state. This counter may experience a discontinuity when the value of the correspondin…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.53.1.2.3.1.1.23`
vgRptrPortLastChange The value of sysUpTime when the last of the following occurred: 1) the agent cold- or warm-started; 2) the row for the port was created (such as when a device or module was added to the system); or 3) an…	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.2.1.53.1.2.3.1.1.24`

vgRptrAddrTrackTable

table

.1.3.6.1.2.1.53.1.3.3.1 · 1 row entry · 4 columns

Open in standard view

Table of address mapping information about the
ports.

vgRptrAddrTrackEntry entry .1.3.6.1.2.1.53.1.3.3.1.1

An entry in the table, containing address mapping
information about a single port.

Indexes

vgRptrGroupIndex vgRptrPortIndex

Column Syntax OID

vgRptrAddrLastTrainedAddress

This object is the MAC address of the last
station which succeeded in training on this port.
A cascaded repeater may train using the null
address. If no stations have succeeded in
training on this port since the agent …

OctetString

Constraints:
range: 0-0
range: 6-6

.1.3.6.1.2.1.53.1.3.3.1.1.1

vgRptrAddrTrainedAddrChanges

This counter is incremented by one for each time
that the vgRptrAddrLastTrainedAddress object for
this port changes.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.53.1.3.3.1.1.2

vgRptrRptrDetectedDupAddress

This object is used to indicate that the
repeater detected an error-free training frame on
this port with a non-null source MAC address which
matches the value of vgRptrAddrLastTrainedAddress
of another active port in t…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.2.1.53.1.3.3.1.1.3

vgRptrMgrDetectedDupAddress

This object can be set by a management station

when it detects that there is a duplicate MAC
address. This object is OR'd with
vgRptrRptrDetectedDupAddress to form the value of
the 'D' bit in training re…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.2.1.53.1.3.3.1.1.4