vgRptrPortTrainingResult

DOT12-RPTR-MIB · .1.3.6.1.2.1.53.1.1.3.1.1.9

Object

column OctetString

This 18 bit field is used to indicate the result
of training.  It contains two bits which indicate
if error-free training frames have been received,
and it also contains the 16 bits of the allowed
configuration field from the most recent
error-free training response frame on the port.
              
  First Octet:    Second and Third Octets:
  7 6 5 4 3 2 1 0
 +-+-+-+-+-+-+-+-+-----------------------------+
 |0|0|0|0|0|0|V|G| allowed configuration field |
 +-+-+-+-+-+-+-+-+-----------------------------+
              
    V:   Valid: set when at least one error-free
         training frame has been received.
         Indicates the 16 training configuration
         bits in vgRptrPortLastTrainConfig and
         vgRptrPortTrainingResult contain valid
         information.  This bit is cleared when
         vgRptrPortStatus transitions to the
         'inactive' or 'training' state.
    G:   LinkGood: indicates the link hardware is
         OK.  Set if 24 consecutive error-free
         training packets have been exchanged.
         Cleared when a training packet with
         errors is received, or when
         vgRptrPortStatus transitions to the
         'inactive' or 'training' state.
              
The format of the current version of the allowed
configuration field is described in section 3.2.
Please refer to the most recent version of the
IEEE 802.12 standard for the most up-to-date
definition of the format of this field.
              
If the port is in training, a management station
can examine this object to see if any training
packets have been passed successfully.  If there
have been any good training packets, the Valid
bit will be set and the management station can
examine the allowed configuration field to see if
there is a duplicate address, configuration, or
security problem.
              
Note that on a repeater local port, this repeater
generates the training response bits, while on
a cascade port, the device at the upper end of
the link originated the training response bits.

Context

MIB: DOT12-RPTR-MIB
OID: .1.3.6.1.2.1.53.1.1.3.1.1.9
Type: column
Access: readonly
Status: current
Parent: vgRptrBasicPortEntry
Table: vgRptrBasicPortTable
Siblings: 10

Syntax

OctetString

Values & Constraints

Object Constraints

range: 3-3

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vgRptrPortIndex This object identifies the port within the group for which this entry contains information. This identifies the port independently from the repeater it may be attached to. The n…	column	Integer32	`.1.3.6.1.2.1.53.1.1.3.1.1.1`
vgRptrPortPriorityEnable A configuration flag used to determine whether the repeater will service high priority requests received on the port as high priority or normal priority. When 'false', high prior…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.53.1.1.3.1.1.10`
vgRptrPortRptrInfoIndex This object identifies the repeater that this port is currently mapped to. The repeater identified by a particular value of this object is the same as that identified by the same…	column	Integer32	`.1.3.6.1.2.1.53.1.1.3.1.1.11`
vgRptrPortType Describes the type of port. One of the following: cascadeExternal - Port is an uplink with physical connections which …	column	Enumeration	`.1.3.6.1.2.1.53.1.1.3.1.1.2`
vgRptrPortAdminStatus Port enable/disable function. Enabling a disabled port will cause training to be initiated by the training initiator (the slave mode device) on the link. Setting this object to …	column	Enumeration	`.1.3.6.1.2.1.53.1.1.3.1.1.3`
vgRptrPortOperStatus Current status for the port as specified by the PORT_META_STATE in the port process module of clause 12 [IEEE Std 802.12]. During initialization or any link warning…	column	Enumeration	`.1.3.6.1.2.1.53.1.1.3.1.1.4`
vgRptrPortSupportedPromiscMode This object describes whether the port hardware is capable of supporting promiscuous mode, single address mode (i.e., repeater filters unicasts not addressed to the end station at…	column	Enumeration	`.1.3.6.1.2.1.53.1.1.3.1.1.5`
vgRptrPortSupportedCascadeMode This object describes whether the port hardware is capable of supporting cascaded repeaters, end nodes, or both. A port for which vgRptrPortType is equal to 'cascadeInternal' or …	column	Enumeration	`.1.3.6.1.2.1.53.1.1.3.1.1.6`
vgRptrPortAllowedTrainType This security object is set by the network manager to configure what type of device is permitted to connect to the port. One of the following values: allowEndN…	column	Enumeration	`.1.3.6.1.2.1.53.1.1.3.1.1.7`
vgRptrPortLastTrainConfig This object is a 16 bit field. For local ports, this object contains the requested configuration field from the most recent error-free training request frame sent by the device c…	column	OctetString	`.1.3.6.1.2.1.53.1.1.3.1.1.8`