vgRptrPortRptrInfoIndex
DOT12-RPTR-MIB ·
.1.3.6.1.2.1.53.1.1.3.1.1.11
Object
column
Integer32
This object identifies the repeater that this port is currently mapped to. The repeater identified by a particular value of this object is the same as that identified by the same value of vgRptrInfoIndex. A value of zero indicates that this port is not currently mapped to any repeater.
Context
- MIB
- DOT12-RPTR-MIB
- OID
.1.3.6.1.2.1.53.1.1.3.1.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vgRptrBasicPortEntry
- Table
- vgRptrBasicPortTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vgRptrPortIndex This object identifies the port within the group
for which this entry contains information. This
identifies the port independently from the
repeater it may be attached to. The n… | column | Integer32 | .1.3.6.1.2.1.53.1.1.3.1.1.1 |
| vgRptrPortPriorityEnable A configuration flag used to determine whether
the repeater will service high priority requests
received on the port as high priority or normal
priority. When 'false', high prior… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.53.1.1.3.1.1.10 |
| vgRptrPortType Describes the type of port. One of the
following:
cascadeExternal - Port is an uplink with
physical connections which
… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.2 |
| vgRptrPortAdminStatus Port enable/disable function. Enabling a
disabled port will cause training to be
initiated by the training initiator (the slave
mode device) on the link. Setting this object to
… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.3 |
| vgRptrPortOperStatus Current status for the port as specified by the
PORT_META_STATE in the port process module of
clause 12 [IEEE Std 802.12].
During initialization or any link warning… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.4 |
| vgRptrPortSupportedPromiscMode This object describes whether the port hardware
is capable of supporting promiscuous mode, single
address mode (i.e., repeater filters unicasts not
addressed to the end station at… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.5 |
| vgRptrPortSupportedCascadeMode This object describes whether the port hardware
is capable of supporting cascaded repeaters, end
nodes, or both. A port for which vgRptrPortType
is equal to 'cascadeInternal' or
… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.6 |
| vgRptrPortAllowedTrainType This security object is set by the network
manager to configure what type of device is
permitted to connect to the port. One of the
following values:
allowEndN… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.7 |
| vgRptrPortLastTrainConfig This object is a 16 bit field. For local ports,
this object contains the requested configuration
field from the most recent error-free training
request frame sent by the device c… | column | OctetString | .1.3.6.1.2.1.53.1.1.3.1.1.8 |
| vgRptrPortTrainingResult This 18 bit field is used to indicate the result
of training. It contains two bits which indicate
if error-free training frames have been received,
and it also contains the 16 bi… | column | OctetString | .1.3.6.1.2.1.53.1.1.3.1.1.9 |