vgRptrPortSupportedPromiscMode
DOT12-RPTR-MIB ·
.1.3.6.1.2.1.53.1.1.3.1.1.5
Object
column
Enumeration
This object describes whether the port hardware is capable of supporting promiscuous mode, single address mode (i.e., repeater filters unicasts not addressed to the end station attached to this port), or both. A port for which vgRptrPortType is equal to 'cascadeInternal' or 'cascadeExternal' will always have a value of 'promiscModeOnly' for this object.
Context
- MIB
- DOT12-RPTR-MIB
- OID
.1.3.6.1.2.1.53.1.1.3.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vgRptrBasicPortEntry
- Table
- vgRptrBasicPortTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | singleModeOnly |
2 | singleOrPromiscMode |
3 | promiscModeOnly |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vgRptrPortIndex This object identifies the port within the group
for which this entry contains information. This
identifies the port independently from the
repeater it may be attached to. The n… | column | Integer32 | .1.3.6.1.2.1.53.1.1.3.1.1.1 |
| vgRptrPortPriorityEnable A configuration flag used to determine whether
the repeater will service high priority requests
received on the port as high priority or normal
priority. When 'false', high prior… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.53.1.1.3.1.1.10 |
| vgRptrPortRptrInfoIndex This object identifies the repeater that this
port is currently mapped to. The repeater
identified by a particular value of this object
is the same as that identified by the same… | column | Integer32 | .1.3.6.1.2.1.53.1.1.3.1.1.11 |
| vgRptrPortType Describes the type of port. One of the
following:
cascadeExternal - Port is an uplink with
physical connections which
… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.2 |
| vgRptrPortAdminStatus Port enable/disable function. Enabling a
disabled port will cause training to be
initiated by the training initiator (the slave
mode device) on the link. Setting this object to
… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.3 |
| vgRptrPortOperStatus Current status for the port as specified by the
PORT_META_STATE in the port process module of
clause 12 [IEEE Std 802.12].
During initialization or any link warning… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.4 |
| vgRptrPortSupportedCascadeMode This object describes whether the port hardware
is capable of supporting cascaded repeaters, end
nodes, or both. A port for which vgRptrPortType
is equal to 'cascadeInternal' or
… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.6 |
| vgRptrPortAllowedTrainType This security object is set by the network
manager to configure what type of device is
permitted to connect to the port. One of the
following values:
allowEndN… | column | Enumeration | .1.3.6.1.2.1.53.1.1.3.1.1.7 |
| vgRptrPortLastTrainConfig This object is a 16 bit field. For local ports,
this object contains the requested configuration
field from the most recent error-free training
request frame sent by the device c… | column | OctetString | .1.3.6.1.2.1.53.1.1.3.1.1.8 |
| vgRptrPortTrainingResult This 18 bit field is used to indicate the result
of training. It contains two bits which indicate
if error-free training frames have been received,
and it also contains the 16 bi… | column | OctetString | .1.3.6.1.2.1.53.1.1.3.1.1.9 |