DLINK-DXS-1210-10TS-AX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

163

Rows

163

Columns

1,148

firmwareInformationTable

table

.1.3.6.1.4.1.171.10.139.2.1.1.1.2.1 · 1 row entry · 4 columns

Open in standard view

The table of Firmware Information.

firmwareInformationEntry entry .1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1

The list ofFirmware Information entry.

Indexes

firmwareInfoImageID

Column	Syntax	OID
firmwareInfoImageID Firmware Information. Image ID.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1.1`
firmwareInfoVersion Firmware Information. Version.	OctetString Constraints: `range: 1-20`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1.2`
firmwareInfoSizeB Firmware Information. Size B.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1.3`
firmwareInfoUpdateTime Firmware Information. Update Time.	OctetString Constraints: `range: 1-20`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1.4`

devFunCfgInfoTable

table

.1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1 · 1 row entry · 3 columns

Open in standard view

A list of configuration entries.

devFunCfgInfoEntry entry .1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1.1

A list of configuration entries.

Indexes

devFunCfgId

Column Syntax OID

devFunCfgId

A unique value, greater than zero, for each configuration id.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1.1.1

devFunCfgSize

The configuration file size by id.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1.1.2

devFunCfgUpdateTime

The configuration last update time by id.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1.1.3

devPingV4ProbeHistoryTable

table

.1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8 · 1 row entry · 3 columns

Open in standard view

Defines a table for storing the results of ping
operations.  The number of entries in this table is
limited per entry in the fsipv6PingTable by the value
of the corresponding cmPingProbeMaxRow object.
          
An implementation of this MIB will remove the oldest
entry in the cmPingProbeHistoryTable of the
corresponding entry in the cmPingProbeMaxRow to allow
the addition of an new entry once the number of rows
in the cmPingProbeHistoryTable reaches the value
specified by pingCtlMaxRows for the corresponding
entry in the cmPingProbeMaxRow.

devPingV4ProbeHistoryEntry entry .1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8.1

Defines an entry in the cmPingProbeHistoryTable.
The first index elements identify the
Probe history entry that a fsPingTable belongs
to. The second index element selects a single
probe result.

Indexes

devPingIndex devPingProbeIndex

Column	Syntax	OID
devPingIndex The index identify the Probe history entry that fsPingTable belongs to	Integer32 Constraints: `range: 0-9`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8.1.1`
devPingProbeIndex The probe history sequence of this entry belong to	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8.1.2`
devPingProbeHistoryResponseTime The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8.1.3`

devIpv6PingProbeHistoryTable

table

.1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9 · 1 row entry · 3 columns

Open in standard view

Defines a table for storing the results of ping
operations.  The number of entries in this table is
limited per entry in the fsipv6PingTable by the value
of the corresponding cmIpv6PingProbeMaxRow object.
          
An implementation of this MIB will remove the oldest
entry in the cmIpv6PingProbeHistoryTable of the
corresponding entry in the cmIpv6PingProbeMaxRow to allow
the addition of an new entry once the number of rows
in the cmIpv6PingProbeHistoryTable reaches the value
specified by pingCtlMaxRows for the corresponding
entry in the cmIpv6PingProbeMaxRow.

devIpv6PingProbeHistoryEntry entry .1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9.1

Defines an entry in the cmIpv6PingProbeHistoryTable.
The first index elements identify the
Probe history entry that a fsIpv6PingTable belongs
to. The second index element selects a single
probe result.

Indexes

devIpv6PingIndex devIpv6PingProbeIndex

Column	Syntax	OID
devIpv6PingIndex The index identify the Probe history entry that fsIpv6PingTable belongs to	Integer32 Constraints: `range: 0-4`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9.1.1`
devIpv6PingProbeIndex The probe history sequence of this entry belong to	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9.1.2`
devIpv6PingProbeHistoryResponseTime The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9.1.3`

deviceErrorCodeTable

table

.1.3.6.1.4.1.171.10.139.2.1.1.1.3.1 · 1 row entry · 2 columns

Open in standard view

A table to control the port specific parameters of the device like speed,
duplex mode, etc.

deviceErrorCodeEntry entry .1.3.6.1.4.1.171.10.139.2.1.1.1.3.1.1

An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port.

Indexes

devErrorCodeIndex

Column	Syntax	OID
devErrorCodeIndex Error code index.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.3.1.1.1`
devErrorString The error string of the index.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.171.10.139.2.1.1.1.3.1.1.2`

syslogServerTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.5 · 1 row entry · 7 columns

Open in standard view

A table consists of a list of SYSLOG servers to log system messages
and debug output to a remote SYSLOG server host.

syslogServerEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1

An entry defines information for a SYSLOG server.

Indexes

syslogServerIndex

Column Syntax OID

syslogServerIndex

the server config entry index.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.1

syslogServerAddressType

This object indicates the type of the server address.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.2

syslogServerAddress

This object indicates the IP or IPv6 address of the SYSLOG server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.3

syslogServerPort

This object indicates the UDP port number to be used for the
SYSLOG server.

Integer32r/w

Constraints:
range: 514-514
range: 1024-65535

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.4

syslogServerSeverity

This object indicates the severity of log messages that will be
sent to the server.

Enumerationr/w

Enumerated Values:

0	emergencie
1	alerts
2	critical
3	error
4	warning
5	notification
6	informational
7	debugging

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.5

syslogServerFacility

Specifies the logging facility of the log host.

Enumerationr/w

Enumerated Values:

0	kern
1	user
2	mail
3	daemon
4	auth
5	syslog
6	lpr
7	news
8	uucp
9	cron
10	authpriv
11	ftp
12	ntp
13	audit
14	console
15	cron2
16	local0
17	local1
18	local2
19	local3
20	local4
21	local5
22	local6
23	local7

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.6

syslogServerRowstatus

The row status variable, used according to installation
and removal conventions for conceptual rows.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.7

syslogBufferTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.7 · 1 row entry · 4 columns

Open in standard view

A table consists of a list of system log messages.

syslogBufferEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1

An entry defines a log message.

Indexes

syslogBufferIndex

Column Syntax OID

syslogBufferIndex

An index that uniquely identifies the message.

Unsigned32

Constraints:
range: 1-100000

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1.1

syslogBufferDateAndTime

The date and time when the message is logged.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1.2

syslogBufferDescription

The content of the log message.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1.3

syslogBufferSeverity

This object indicates the severity of log messages that will be
sent to the server.

Enumeration

Enumerated Values:

0	emergencie
1	alerts
2	critical
3	error
4	warning
5	notification
6	informational
7	debugging

.1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1.4

portCtrlTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.13.1 · 1 row entry · 9 columns

Open in standard view

A table to control the port specific parameters of the device like speed,
duplex mode, etc.

portCtrlEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.13.1.1

An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port.

Indexes

portSetIndex portSetMediaType

Column Syntax OID

portSetIndex

Interface index of the port for the configuration
in this entry applies.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.1

portSetMediaType

Media Type.

Enumeration

Enumerated Values:

1	copper
2	fiber

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.2

portSetState

Enables / disables Port state.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.3

portSetFlowControl

On / off flow control for the interface.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.4

portSetDuplex

Configures port settings auto/half/full mode.

Enumerationr/w

Enumerated Values:

1	auto
2	full

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.5

portSetSpeed

Configures port settings speed.

Enumerationr/w

Enumerated Values:

1	auto
2	rate100M
3	rate1000M
4	rate1000M-Master
5	rate1000M-Slave
6	rate10G

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.6

portSetCapaAdvertised

Configures port settings interface capability advertised 100M/1000M/10G .

Enumerationr/w

Enumerated Values:

1	adv100M
2	adv1G
3	adv100M-1G
4	adv10G
5	adv100M-10G
6	adv1G-10G
7	adv100M-1G-10G

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.7

portSetDescription

Configures port settings Description.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.8

portSetLinkStatus

Show port settings LinkStatus up /down.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.9

portStatusTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.13.2 · 1 row entry · 9 columns

Open in standard view

A table to control the port specific parameters of the device like speed,
duplex mode, etc.

portStatusEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.13.2.1

An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.

Indexes

portStaIndex portStaMediaType

Column Syntax OID

portStaIndex

Interface index of the port for the configuration
in this entry applies.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.1

portStaMediaType

Media Type.

Enumeration

Enumerated Values:

1	copper
2	fiber

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.2

portStaStatus

Show port status Link Status up /down.

Enumeration

Enumerated Values:

1	connected
2	notconnected

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.3

portStaMacAddr

Show port status MAC Address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.4

portStaVlan

The VLAN-ID assigned to untagged frames received on this port.
The port in native VLAN will also been set as untagged as default setting.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.5

portStaFlowCtrlOpSend

On / off flow control Operator Send for the interface.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.6

portStaFlowCtrlOpRece

On / off flow control Operator Receive for the interface.

Enumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.7

portStaDuplex

Show port Status Duplex auto/full mode.

Enumeration

Enumerated Values:

1	auto
2	full
3	auto-full
4	auto-falf

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.8

portStaSpeed

Show port Status speed.

Enumeration

Enumerated Values:

1	auto
2	rate100M
3	rate1000M
4	rate1000M-Master
5	rate1000M-Slave
6	rate10G
7	auto-rate100M
8	auto-rate1000M
9	auto-rate10G

.1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.9

errDisIfStatusTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.13.6 · 1 row entry · 6 columns

Open in standard view

The Port Error Disable table.

errDisIfStatusEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.13.6.1

A list of information for the err port of the device.

Indexes

errDisIfStatusPortIndex errDisIfStatusVlanIndex

Column Syntax OID

errDisIfStatusPortIndex

This object is the interface index of the interface
disabled by a feature.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.1

errDisIfStatusVlanIndex

This object indicates the VLAN in the given interface
that has been error-disabled.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.2

errDisPortState

This object decides whether the port state is enabled or disabled.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.3

errDisPortConnectStatus

This object decides whether the PortStatus is err-disabled.

Enumeration

Enumerated Values:

1	other
2	err-disabled

.1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.4

errDisPortReason

This object indicats the reason for Port Error Disable event occur.

Enumeration

Enumerated Values:

1	portsecurity
2	stormControl
3	arpRateLimit
4	bpduRateLimit
5	dhcpRateLimit
6	loopbackDetect

.1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.5

errDisPortRecoveryTimeLeft

This object indicats the remaining time for Port Error Disable state recovery.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.6

errDisRecoveryTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.13.7 · 1 row entry · 3 columns

Open in standard view

This table contains the recovery mechanism for the features with 
error-disable functionality.

errDisRecoveryEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.13.7.1

An entry is created for each feature which has error-disable
functionality.

Indexes

errDisRecoveryReason

Column Syntax OID

errDisRecoveryReason

This object indicates the cause of error-disable.

Enumeration

Enumerated Values:

1	portsecurity
2	stormControl
3	arpRateLimit
4	bpduRateLimit
5	dhcpRateLimit
6	loopbackDetect

.1.3.6.1.4.1.171.10.139.2.1.2.13.7.1.1

errDisRecoveryStatus

This object specifies whether the system can
automatically recover a system entity that has been
disabled by the cause.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.2.13.7.1.2

errDisRecoveryInterval

Specifies the error-recovery time interval on specific cause
to recover the port/interface from the error disabled situation.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.2.13.7.1.3

jumboFrameTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.13.14 · 1 row entry · 2 columns

Open in standard view

A table to control the port specific parameters of the device like speed,
duplex mode, etc.

jumboFrameEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.13.14.1

An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port.

Indexes

portIndex

Column	Syntax	OID
portIndex Interface index of the port for the configuration in this entry applies.	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.171.10.139.2.1.2.13.14.1.1`
maxReceFrameSize Interface index of the port for the configuration in this entry applies.	Integer32r/w Constraints: `range: 1518-9216`	`.1.3.6.1.4.1.171.10.139.2.1.2.13.14.1.2`

sntpServerTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.17.3.3 · 1 row entry · 7 columns

Open in standard view

The table contains configured SNTP/NTP servers in the system.

sntpServerEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1

Each entry in the table contains necessary information to
send SNTP request to the servers.

Indexes

sntpServerAddrType sntpServerAddr

Column Syntax OID

sntpServerAddrType

The IP address type ipv4 or ipv6.

Enumeration

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.1

sntpServerAddr

The unicast IPv4/IPv6 server address in the Unicast Addressing mode

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.2

sntpServerStratum

stratum levels define the distance from the reference clock.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.3

sntpServerVersion

sntp server version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.4

sntpServerLastReceive

The value of sysUpTime when this server was synced.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.5

sntpServerSynced

This object indicates whether the corresponding server is the
current synced server.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.6

sntpServerRowStatus

The activation of a row adds server entry. The destruction of a row
removes server entry

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.7

timeRangeTable

table

.1.3.6.1.4.1.171.10.139.2.1.2.38.1 · 1 row entry · 8 columns

Open in standard view

A table to configure time Range in the system.

timeRangeEntry entry .1.3.6.1.4.1.171.10.139.2.1.2.38.1.1

A schedule entry to configure time Range in the system.

Indexes

timeRangeName timeRangeIndex

Column Syntax OID

timeRangeName

The Schedule name associated with the Schedule entry (e.g., `abc, bbb').

OctetString

Constraints:
range: 1-20

.1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.1

timeRangeIndex

The Time Range identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 52.

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.2

timeRangeStartHour

Start hour of the Schedule entry.
The value must be from 0 to 23.

Integer32r/w

Constraints:
range: 0-23

.1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.3

timeRangeStartMinute

Start minute of the Schedule entry.
The value must be from 0 to 59.

Integer32r/w

Constraints:
range: 0-59

.1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.4

timeRangeEndHour

End hour of the Schedule entry.
The value must be from 0 to 23.

Integer32r/w

Constraints:
range: 0-23

.1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.5

timeRangeEndMinute

End minute of the Schedule entry.
The value must be from 0 to 59.

Integer32r/w

Constraints:
range: 0-59

.1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.6

timeRangeWeekday

Enable/Disble scheduling weekday list.

Bitsr/w

Enumerated Values:

0	saturday
1	friday
2	thursday
3	wednesday
4	tuesday
5	monday
6	sunday

.1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.7

timeRangeRowStatus

The status of an entry in the Time Range Information Table. Only a subset
of the rowstatus variables (active, notinservice, createAndWait, destroy)
are available.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.8

userAccountsTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.1.1.1 · 1 row entry · 5 columns

Open in standard view

A table to User Accounts Settings. User Management Settings.

userAccountsEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1

An entry appears in User Accounts Settings. User Management Settings.

Indexes

userName

Column Syntax OID

userName

The name of user entry.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.1

userPrivilege

User Management Settings. Privilege (1-15)

Unsigned32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.2

userEncryptControl

Enable or disable Encrypt of user password.

Enumerationr/w

Enumerated Values:

1	enabled
2	disable

.1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.3

userPassword

The password of user entry.
0 means no password.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.4

userRowStatus

Row Status of user Accounts Entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.5

userSessionTableEntry

table

.1.3.6.1.4.1.171.10.139.2.1.3.1.2.1 · 1 row entry · 6 columns

Open in standard view

A Session Table contain the user login information.

userSessionEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1

A Session Table contain the user login information.

Indexes

sessionID

Column Syntax OID

sessionID

The index of session table.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.1

liveTime

The time peroid user has kept login.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.2

loginType

Enumeration

Enumerated Values:

1	http
2	telnet
3	ssh
4	console

.1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.3

loginIP

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.4

loginUserLevel

The level of session which user login.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.5

loginUserName

The name of login user.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.6

snmpViewTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.3.3.1 · 1 row entry · 4 columns

Open in standard view

The table of snmp view tree.

snmpViewEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1

The list of snmp view tree entry.

Indexes

snmpViewName snmpViewSubtree

Column Syntax OID

snmpViewName

The human readable name for a family of view subtrees.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1.1

snmpViewSubtree

The MIB subtree which when combined with the
corresponding instance of vacmViewFamilyMask
defines a family of view subtrees.

ObjectIdentifier

.1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1.2

snmpViewType

Indicates whether the corresponding instances of
vacmViewFamilySubtree and vacmViewFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.

Enumerationr/w

Enumerated Values:

1	included
2	excluded

.1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1.3

snmpViewStatus

The status of this conceptual row.

The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:

The value of…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1.4

snmpCommunityTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.3.4.1 · 1 row entry · 6 columns

Open in standard view

The table of snmp community.

snmpCommunityEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1

The list of snmp community entry.

Indexes

snmpCommName

Column Syntax OID

snmpCommName

The unique index value of a row in this table.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.1

snmpCommKeyType

Key Type.

Enumerationr/w

Enumerated Values:

1	plainText
2	encrypted

.1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.2

snmpCommViewName

SNMP Community Settings View Name.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.3

snmpCommAccessRight

SNMP Community Settings Key Type.

Enumerationr/w

Enumerated Values:

1	readOnly
2	readWrite

.1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.4

snmpCommIPAccListName

SNMP Community Settings IP Access-List Name.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.5

snmpCommStatus

The status of this conceptual row in the
snmpCommunityTable.

An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through defau…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.6

snmpGroupTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1 · 1 row entry · 8 columns

Open in standard view

The table of snmp group.

snmpGroupEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1

The list of snmp group entry.

Indexes

snmpGroupName snmpGroupSecurityModel snmpGroupSecurityLevel

Column Syntax OID

snmpGroupName

The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.

This groupName is used as index into the
vacmAccessTable to select an access control policy.
Ho…

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.1

snmpGroupSecurityModel

In order to gain the access rights allowed by this
conceptual row, this securityModel must be in use.

Enumeration

Enumerated Values:

1	v1
2	v2c
3	v3

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.2

snmpGroupSecurityLevel

The minimum level of security required in order to
gain the access rights allowed by this conceptual
row. A securityLevel of noAuthNoPriv is less than
authNoPriv which in turn is less than authPriv.

If m…

Enumeration

Enumerated Values:

1	noAuthNoPriv
2	authNoPriv
3	authPriv

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.3

snmpGroupReadViewName

The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes read access.

The identified MIB view is that one for which the
vacmViewTreeFamil…

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.4

snmpGroupWriteViewName

The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes write access.

The identified MIB view is that one for which the
vacmViewTreeFami…

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.5

snmpGroupNotifyViewName

The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes access for notifications.

The identified MIB view is that one for which the
vacm…

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.6

snmpGroupIpListName

SNMP Group Settings IP Address-List Name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.7

snmpGroupStatus

The status of this conceptual row.

The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:

The value of…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.8

snmpUserTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1 · 1 row entry · 14 columns

Open in standard view

The table of snmp user.

snmpUserEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1

The list of snmp user entry.

Indexes

snmpUserName snmpUserVersion

Column Syntax OID

snmpUserName

A human readable string representing the name of
the user.

This is the (User-based Security) Model dependent
security ID.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.1

snmpUserVersion

A human readable string representing the name of
the user.

This is the (User-based Security) Model dependent
security ID.

Enumeration

Enumerated Values:

1	v1
2	v2c
3	v3

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.2

snmpUserGroupName

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.3

snmpUserV3Encrypt

A human readable string representing the name of
the user.

This is the (User-based Security) Model dependent
security ID.

Enumerationr/w

Enumerated Values:

0	none
1	password
2	key

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.4

snmpUserAuthProtocol

An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.

An …

Enumerationr/w

Enumerated Values:

1	none
2	md5
3	sha

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.5

snmpUserAuthProtocolPassword

Password of snmp user auth protocol.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.6

snmpUserPrivProtocol

An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
…

Enumerationr/w

Enumerated Values:

1	none
2	des

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.7

snmpUserPrivProtocolPassword

Password of snmp user priv protocol.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.8

snmpUserAuthProtoByKey

Auth-Protocol by Key.

Enumerationr/w

Enumerated Values:

1	none
2	md5
3	sha

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.9

snmpUserAuthProtoKey

Key of snmp user auth protocol by Key.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.10

snmpUserPrivProtoByKey

Priv-Protocol by Key.

Enumerationr/w

Enumerated Values:

1	none
2	des

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.11

snmpUserPrivProtoKey

Key of snmp user Priv protocol by Key.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.12

snmpUserIpListName

SNMP User Settings IP Address-List Name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.13

snmpUserStatus

The status of this conceptual row.

Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.14

snmpHostTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.3.8.1 · 1 row entry · 6 columns

Open in standard view

The table of snmp host.

snmpHostEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1

The list of snmp host entry.

Indexes

snmpHostAddress snmpHostIPType

Column Syntax OID

snmpHostAddress

This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.1

snmpHostIPType

Type of IP interface.

Enumeration

Enumerated Values:

1	iPv4
2	iPv6

.1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.2

snmpHostVersion

The Level of Security to be used when generating
SNMP messages using this entry.

Enumerationr/w

Enumerated Values:

1	v1
2	v2c
3	noAuthNoPriv
4	authNoPriv
5	authPriv

.1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.3

snmpHostUDPPort

SNMP UDP Port (1-65535).

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.4

snmpHostCommunityName

The locally arbitrary.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.5

snmpHostStatus

The status of this conceptual row in the
snmpHostTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.6

rmonStatsTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1 · 1 row entry · 21 columns

Open in standard view

A list of Ethernet statistics entries.

rmonStatsEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1

A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1

Indexes

rmonStatsIndex

Column Syntax OID

rmonStatsIndex

The value of this object uniquely identifies this entry.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.1

rmonStatsDataSource

This object identifies the source of the data that
this etherStats entry is configured to analyze. This
source can be any ethernet interface on this device.
In order to identify a particular interface, this object
shal…

ObjectIdentifierr/w

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.2

rmonStatsOwner

The entity that configured this entry and is therefore
using the resources assigned to it.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.3

rmonStatsOctets

The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).

This object can be used as a reasonable estimate of
10-Megabi…

OctetsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.4

rmonStatsPkts

The total number of packets (including bad packets,
broadcast packets, and multicast packets) received.

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.5

rmonStatsBroadcastPkts

The total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets.

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.6

rmonStatsMulticastPkts

The total number of good packets received that were
directed to a multicast address. Note that this number
does not include packets directed to the broadcast
address.

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.7

rmonStatsUndersizePkts

The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.8

rmonStatsOversizePkts

The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.9

rmonStatsFragments

The total number of packets received that were less than
64 octets in length (excluding framing bits but including
FCS octets) and had either a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error…

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.10

rmonStatsJabbers

The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or…

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.11

rmonStatsCRCErrors

The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number…

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.12

rmonStatsCollisions

The best estimate of the total number of collisions
on this Ethernet segment.

The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) o…

CollisionsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.13

rmonStatsDropEvents

The total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has b…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.14

rmonStatsPkts64Octets

The total number of packets (including bad
packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.15

rmonStatsPkts65to127Octets

The total number of packets (including bad
packets) received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.16

rmonStatsPkts128to255Octets

The total number of packets (including bad
packets) received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.17

rmonStatsPkts256to511Octets

The total number of packets (including bad
packets) received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.18

rmonStatsPkts512to1023Octets

The total number of packets (including bad
packets) received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.19

rmonStatsPkts1024to1518Octets

The total number of packets (including bad
packets) received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).

PacketsSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.20

rmonStatsStatus

The status of this etherStats entry.

RmonStatusr/w

Textual Convention: RmonStatus Enumeration

Type Values:

1	valid
2	createRequest
3	underCreation
4	invalid

.1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.21

rmonHistoryControlTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.1 · 1 row entry · 7 columns

Open in standard view

A list of history control entries.

rmonHistoryControlEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1

A list of parameters that set up a periodic sampling of
statistics. As an example, an instance of the
historyControlInterval object might be named
historyControlInterval.2

Indexes

rmonHistoryControlIndex

Column Syntax OID

rmonHistoryControlIndex

An index that uniquely identifies an entry in the
historyControl table. Each such entry defines a
set of samples at a particular interval for an
interface on the device.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.1

rmonHistoryControlDataSource

This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
historyControlEntry. This source can be any
interface on this device. In ord…

ObjectIdentifierr/w

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.2

rmonHistoryControlBucketsRequested

The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.

When this object is created or modified, th…

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.3

rmonHistoryControlBucketsGranted

The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
historyControlEntry.

When the associated historyControlBucketsRequeste…

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.4

rmonHistoryControlInterval

The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
historyControlEntry. This interval can
be set to any number of seconds between 1 and
3…

SecondsInteger32r/w

Constraints:
range: 1-3600

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.5

rmonHistoryControlOwner

The entity that configured this entry and is therefore
using the resources assigned to it.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.6

rmonHistoryControlStatus

The status of this historyControl entry.

Each instance of the media-specific table associated
with this historyControlEntry will be deleted by the agent
if this historyControlEntry is not equal to valid(1…

RmonStatusr/w

Textual Convention: RmonStatus Enumeration

Type Values:

1	valid
2	createRequest
3	underCreation
4	invalid

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.7

rmonHistoryTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2 · 1 row entry · 14 columns

Open in standard view

A list of Ethernet history entries.

rmonHistoryEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1

An historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
historyControlEntry which set up the parameters for
a regular collection of these samples. As an examp…

Indexes

rmonHistoryIndex rmonHistorySampleIndex

Column	Syntax	OID
rmonHistoryIndex The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.1`
rmonHistorySampleIndex An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.2`
rmonHistoryOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).	OctetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.3`
rmonHistoryPkts The number of packets (including bad packets) received during this sampling interval.	PacketsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.4`
rmonHistoryBroadcastPkts The number of good packets received during this sampling interval that were directed to the broadcast address.	PacketsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.5`
rmonHistoryMulticastPkts The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address.	PacketsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.6`
rmonHistoryUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32 Constraints: `range: 0-10000`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.7`
rmonHistoryUndersizePkts The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.	PacketsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.8`
rmonHistoryOversizePkts The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.	PacketsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.9`
rmonHistoryFragments The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) wit…	PacketsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.10`
rmonHistoryJabbers The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number …	PacketsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.11`
rmonHistoryCRCErrors The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) wit…	PacketsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.12`
rmonHistoryCollisions The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and…	CollisionsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.13`
rmonHistoryDropEvents The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the numbe…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.14`

rmonAlarmTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1 · 1 row entry · 12 columns

Open in standard view

A list of alarm entries.

rmonAlarmEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1

A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8

Indexes

rmonAlarmIndex

Column Syntax OID

rmonAlarmIndex

An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.1

rmonAlarmInterval

The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be s…

SecondsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.2

rmonAlarmVariable

The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
…

ObjectIdentifierr/w

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.3

rmonAlarmSampleType

The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directl…

Enumerationr/w

Enumerated Values:

1	absoluteValue
2	deltaValue

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.4

rmonAlarmValue

The value of the statistic during the last sampling
period. For example, if the sample type is deltaValue,
this value will be the difference between the samples
at the beginning and end of the period. If the sample
ty…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.5

rmonAlarmStartupAlarm

The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or r…

Enumerationr/w

Enumerated Values:

1	risingAlarm
2	fallingAlarm
3	risingOrFallingAlarm

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.6

rmonAlarmRisingThreshold

A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generat…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.7

rmonAlarmFallingThreshold

A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generat…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.8

rmonAlarmRisingEventNumber

The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.9

rmonAlarmFallingEventNumber

The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If ther…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.10

rmonAlarmOwner

The entity that configured this entry and is therefore
using the resources assigned to it.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.11

rmonAlarmStatus

The status of this alarm entry.

RmonStatusr/w

Textual Convention: RmonStatus Enumeration

Type Values:

1	valid
2	createRequest
3	underCreation
4	invalid

.1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.12

rmonEventTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.1 · 1 row entry · 7 columns

Open in standard view

A list of events to be generated.

rmonEventEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1

A set of parameters that describe an event to be generated
when certain conditions are met. As an example, an instance
of the eventLastTimeSent object might be named
eventLastTimeSent.6

Indexes

rmonEventIndex

Column Syntax OID

rmonEventIndex

An index that uniquely identifies an entry in the
event table. Each such entry defines one event that
is to be generated when the appropriate conditions
occur.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.1

rmonEventDescription

A comment describing this event entry.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.2

rmonEventType

The type of notification that the probe will make
about this event. In the case of log, an entry is
made in the log table for each event. In the case of
snmp-trap, an SNMP trap is sent to one or more
management statio…

Enumerationr/w

Enumerated Values:

1	none
2	log
3	snmptrap
4	logandtrap

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.3

rmonEventCommunity

If an SNMP trap is to be sent, it will be sent to
the SNMP community specified by this octet string.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.4

rmonEventOwner

The entity that configured this entry and is therefore
using the resources assigned to it.

If this object contains a string starting with 'monitor'
and has associated entries in the log table, all connect…

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.5

rmonEventStatus

The status of this event entry.

If this object is not equal to valid(1), all associated
log entries shall be deleted by the agent.

RmonStatusr/w

Textual Convention: RmonStatus Enumeration

Type Values:

1	valid
2	createRequest
3	underCreation
4	invalid

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.6

rmonEventLastTimeSent

The value of sysUpTime at the time this event
entry last generated an event. If this entry has
not generated any events, this value will be
zero.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.7

rmonLogTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.4.6.2 · 1 row entry · 4 columns

Open in standard view

A list of events that have been logged.

rmonLogEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1

A set of data describing an event that has been
logged. For example, an instance of the logDescription
object might be named logDescription.6.47

Indexes

rmonLogEventIndex rmonLogIndex

Column	Syntax	OID
rmonLogEventIndex The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1.1`
rmonLogIndex An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association be…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1.2`
rmonLogTime The value of sysUpTime when this log entry was created.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1.3`
rmonLogDescription An implementation dependent description of the event that activated this log entry.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1.4`

ddpTable

table

.1.3.6.1.4.1.171.10.139.2.1.3.14.3 · 1 row entry · 2 columns

Open in standard view

Define sysDDPTable for per port settings.

ddpEntry entry .1.3.6.1.4.1.171.10.139.2.1.3.14.3.1

Define sysDDPTable for per port settings.

Indexes

ddpPort

Column Syntax OID

ddpPort

This object indicates the port index.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.171.10.139.2.1.3.14.3.1.1

ddpPortStatus

This object indicates DDP status is enabled or disabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.3.14.3.1.2

fdbUnicastStaticFDBTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1 · 1 row entry · 5 columns

Open in standard view

Unicast Static FDB .

fdbUnicastStaticFDBEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1

Unicast Static FDB .

Indexes

fdbUnicastStaticFDBVID fdbUnicastStaticFDBMACAddr

Column Syntax OID

fdbUnicastStaticFDBVID

Unicast Static FDB. VID (1-4094).

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.1

fdbUnicastStaticFDBMACAddr

Unicast Static FDB. MAC Address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.2

fdbUnicastStaticFDBPort

Unicast Static FDB. port.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.3

fdbUnicastStaticFDBState

This object indicates the status of this entry.
permanent(1) - this entry is currently in use
and will remain so after the next reset of
the bridge.
permanentDrop(2) - This entry will filter the packet with the …

Enumerationr/w

Enumerated Values:

1	permanent
2	permanentDrop

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.4

fdbUnicastStaticFDBRowStatus

This object indicates the status of fdbUnicastStaticFDBTable
to which a frame with a specific unicast
address will be flooded in the event that it has not
been learned. To set fdbUnicastStaticFDBPort,
we have to set …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.5

fdMulticastStaticFDBTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1 · 1 row entry · 4 columns

Open in standard view

Multicast Static FDB .

fdbMulticastStaticFDBEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1

Multicast Static FDB .

Indexes

fdbMulticastStaticFDBVID fdbMulticastStaticFDBMACAddr

Column Syntax OID

fdbMulticastStaticFDBVID

Multicast Static FDB. VID (1-4094).

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1.1

fdbMulticastStaticFDBMACAddr

Multicast Static FDB. MAC Address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1.2

fdbMulticastStaticFDBEgressPorts

Multicast Static FDB. egress PortList.

PortListr/w

Textual Convention: PortList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1.3

fdbMulticastStaticFDBRowStatus

This object indicates the status of fdMulticastStaticFDBTable
to which a frame with a specific multicast
address will be flooded in the event that it has not
been learned. To set fdbMulticastStaticFDBEgressPorts,
we …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1.4

fdbMACAddressLearningTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.1.2.2 · 1 row entry · 2 columns

Open in standard view

Multicast Static FDB .

fdbMACAddressLearningEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.1.2.2.1

Multicast Static FDB .

Indexes

fdbMACAddressLearningPort

Column Syntax OID

fdbMACAddressLearningPort

MAC Address Learning. port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.1.2.2.1.1

fdbMACAddressLearningState

MAC Address Learning. State.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.1.2.2.1.2

fdbMACAddressTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.1.3 · 1 row entry · 4 columns

Open in standard view

Multicast Static FDB .

fdbMACAddressTableEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.1.3.1

Multicast Static FDB .

Indexes

fdbMACAddrTabVID fdbMACAddrTabMACAddr

Column Syntax OID

fdbMACAddrTabVID

MAC Address Table. VID (1-4094).

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.1.3.1.1

fdbMACAddrTabMACAddr

MAC Address Table. MAC Address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.1.3.1.2

fdbMACAddrTabType

MAC Address Table. Type.

Enumeration

Enumerated Values:

3	dynamic
4	self
5	static

.1.3.6.1.4.1.171.10.139.2.1.4.1.3.1.3

fdbMACAddrTabPort

The port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dynamicFdbMacAddr has
been seen.If the port is LA port, will show 'po' before port.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.4.1.3.1.4

dot1qVlanTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.2.2 · 1 row entry · 5 columns

Open in standard view

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

dot1qVlanEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.2.2.1

Information for a VLAN configured into the
device by (local or network) management.

Indexes

dot1qVlanid

Column Syntax OID

dot1qVlanid

Vlan id used to identify the VLAN.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.1

dot1qVlanName

An administratively assigned string, which may be used
to identify the VLAN.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.2

dot1qVlanEgressPorts

The set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVR…

PortList

Textual Convention: PortList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.3

dot1qVlanUntaggedPorts

The set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There …

PortList

Textual Convention: PortList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.4

dot1qVlanRowStatus

The status of a row in sysDot1qVlanTable. By setting this object, new
entries can be created in sysDot1qVlanTable and existing entries can be
removed from sysDot1qVlanTable. It can be used as specified in the SNMP
v2 st…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.99

dot1qVlanPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.2.3 · 1 row entry · 8 columns

Open in standard view

A table containing per port control and status
information for VLAN configuration in the device.

dot1qVlanPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.2.3.1

Information controlling VLAN configuration for a port
on the device.

Indexes

dot1qVlanPortIndex

Column Syntax OID

dot1qVlanPortIndex

Port index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.1

dot1qVlanPortVlanMode

This is used to specify the VLAN mode for the port.
Use the no command to reset the VLAN mode to the
default setting.

Enumerationr/w

Enumerated Values:

1	access
2	trunk
3	hybrid

.1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.2

dot1qVlanPortAcceptableFrameType

This is used to set the acceptable types of frames by
a port. Use the no form of the command to reset to the
default setting.

Enumerationr/w

Enumerated Values:

1	admitAll
2	admitTagged
3	admitUntagged

.1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.3

dot1qVlanPortIngressChecking

This is used to enable ingress checking for frames received
by a port. Use the no command to disable the ingress check.

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.4

dot1qVlanPortNativeVlanStatus

This object indicates whether enable tagging or untagging mode
of the native VLAN on the interface.
This value is meaningful only to TRUNK port.Access port and hybrid
port MUST keep disabled.

Enumerationr/w

Enumerated Values:

0	disable
1	tag
2	untag

.1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.5

dot1qVlanPortNativeVlanId

The VLAN-ID assigned to untagged frames received on this port.
The port in native VLAN will also been set as untagged as default setting.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.6

dot1qVlanPortTagVlanList

The tagged VLAN list which the port belongs to.

VlanListr/w

Textual Convention: VlanList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.7

dot1qVlanPortUntagVlanList

The untagged VLAN list which the port belongs to.

VlanListr/w

Textual Convention: VlanList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.8

stpPortConfigurationTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.3.2 · 1 row entry · 13 columns

Open in standard view

This table contains Common Spanning Tree Port
Information.

stpPortConfigurationEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1

A list of information maintained by every port for
Common Spanning tree.

Indexes

stpPort

Column Syntax OID

stpPort

The Port number of the port for which this entry contains
spanning tree information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.1

stpPortAdminPathCost

The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically calculated
default Path Cost value to the p…

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.2

stpPortPathCost

The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.3

stpPortState

Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.4

stpPortGuardRoot

A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Po…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.5

stpPortLinkType

The administrative point-to-point status of the LAN segment
attached to this port. A value of p2p(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of shared(…

Enumerationr/w

Enumerated Values:

0	p2p
1	shared
2	auto

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.6

stpPortOperLinkType

The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-det…

Enumeration

Enumerated Values:

1	p2p
2	shared

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.7

stpPortFast

The administrative value of the Edge Port parameter. A
value of edge(0) indicates that this port should be
assumed as an edge-port and a value of disabled(1) indicates
that this port should be assumed as a non-edge-por…

Enumerationr/w

Enumerated Values:

0	edge
1	disabled
2	network

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.8

stpPortOperFast

The operational value of the Edge Port parameter. The
object is initialized to the value of
stpPortFast and is set FALSE on reception
of a BPDU.

Enumeration

Enumerated Values:

1	edge
2	non-edge

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.9

stpPortTCNFilter

A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause t…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.10

stpPortFowardBPDU

This object is for enabling or disabling forward BPDU.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.11

stpPortPriority

The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priori…

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.12

stpPortHelloTime

The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second.

Integer32r/w

Constraints:
range: 100-1000

.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.13

mstVlanMstiMappingTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.3.3.4 · 1 row entry · 7 columns

Open in standard view

This table contains one entry for each instance of MSTP. 
This table maintains context ID as one more index to 
support Multiple Instances.

mstVlanMstiMappingEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceIndex

Column	Syntax	OID
mstInstanceIndex An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.	Integer32 Constraints: `range: 1-15`	`.1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.1`
mstSetVlanList A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to …	OctetStringr/w Constraints: `range: 0-512`	`.1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.2`
mstResetVlanList A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to …	OctetStringr/w Constraints: `range: 0-512`	`.1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.3`
mstInstanceVlanMapped A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to …	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.4`
mstInstanceVlanMapped2k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.5`
mstInstanceVlanMapped3k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.6`
mstInstanceVlanMapped4k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.7`

mstMstiBridgeTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.3.4.6 · 1 row entry · 7 columns

Open in standard view

Table containing Bridge Information specific to Spanning 
Tree Instance. This table maintains context ID as one 
more index to support Multiple Instances.

mstMstiBridgeEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1

Entry indicating the Bridge Information.

Indexes

mstMstiInstanceIndex

Column Syntax OID

mstMstiInstanceIndex

Spanning Tree Instance to which the information belongs.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.1

mstMstiBridgePriority

The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.

Integer32r/w

Constraints:
range: 0-61440

.1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.2

mstMstiStatus

The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabl…

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.3

mstMstiPortDesignatedRoot

The unique Bridge Identifier of the bridge recorded as the
MSTI Regional Root in the configuration BPDUs transmitted.

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.4

mstMstiBridgeRegionalRoot

MSTI Regional Root Identifier value for the Instance. This value
is used as the MSTI Regional Root Identifier parameter in all
Configuration Bridge PDUs originated by this node

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.5

mstMstiPortDesignatedBridge

The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.6

mstMstiTopChanges

The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for this
spanning tree instance.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.7

mstCistPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.1 · 1 row entry · 7 columns

Open in standard view

This table contains Common Spanning Tree Port
Information.

mstCistPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1

A list of information maintained by every port for
Common Spanning tree.

Indexes

mstCistPort

Column Syntax OID

mstCistPort

The Port number of the port for which this entry contains
spanning tree information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.1

mstCistPortAdminPathCost

The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.2

mstCistPortPathCost

The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.3

mstCistPortPriority

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.4

mstCistPortState

Current state of the Port as defined by the Common
spanning tree protocol.

Enumeration

Enumerated Values:

1	disabled
2	discarding
4	learning
5	forwarding

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.5

mstCistCurrentPortRole

Current Port Role of the port for this spanning
tree instance.

Enumeration

Enumerated Values:

0	disabled
1	alternate
2	backup
3	root
4	designated
5	master

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.6

mstCistPortProtocolMigration

Indicates the Protocol migration state of this Port.
writing TRUE(1) to this object forces this port to transmit protocol BPDU
Any other operation on this object has no effect.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.7

mstMstiPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.2 · 1 row entry · 7 columns

Open in standard view

This table contains Spanning Tree Instance Specific Port
Information.

mstMstiPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1

A list of information maintained by every port for each
and every spanning tree instance.

Indexes

mstMstiPort mstMstiPortInstanceIndex

Column Syntax OID

mstMstiPort

The Port number of the port for which this entry contains
spanning tree information.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.1

mstMstiPortInstanceIndex

An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.2

mstMstiPortAdminPathCost

The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.3

mstMstiPortPathCost

The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.4

mstMstiPortPriority

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.5

mstMstiPortState

Current state of the Port as defined by the Multiple
spanning tree protocol. Port which is Forwarding state
in one instance can be in Discarding (Blocking) state
in another instance.

Enumeration

Enumerated Values:

1	disabled
2	discarding
4	learning
5	forwarding

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.6

mstMstiCurrentPortRole

Current Port Role of the port for this spanning
tree instance.

Enumeration

Enumerated Values:

0	disabled
1	alternate
2	backup
3	root
4	designated
5	master

.1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.7

lbdportTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.4.2.1 · 1 row entry · 4 columns

Open in standard view

A table to control Loopback detection features either for
the entire switch or for each interface in the switch.

lbdportEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1

An entry appears in this table for each interface
in the system.

Indexes

lbdportIndex

Column Syntax OID

lbdportIndex

The interface index of the port for which the configuration
in this entry applies.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1.1

lbdportState

Provides control to per port enable or disable the loopback detection
function. Default is disabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1.2

lbdportResult

The loop Result for this port.

Enumeration

Enumerated Values:

1	normal
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1.3

lbdportTimeLeft

Loopback Detection Port Settings Time Left (sec).

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1.4

lbdVlanLoopTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.4.3.1 · 1 row entry · 2 columns

Open in standard view

A table to display Loopback detection features by vlan
mode.

lbdVlanLoopEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.4.3.1.1

An entry appears in this table for each interface
in the system.

Indexes

lbdVlanLoopIndex

Column	Syntax	OID
lbdVlanLoopIndex Display port lists loop status by vlan.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.171.10.139.2.1.4.4.3.1.1.1`
lbdVlanLoopPorts Display port lists loop status by vlan.	PortList Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.4.3.1.1.2`

laPortChannelTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.1 · 1 row entry · 6 columns

Open in standard view

A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel

laPortChannelEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1

There is one entry in this table for each created port-channel port

Indexes

laPortChannelIfIndex

Column Syntax OID

laPortChannelIfIndex

The ifIndex of the port-channel(Aggregator's interface index).

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.1

laPortChannelMaxPorts

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.2

laPortChannelMemberNumber

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.3

laPortChannelMemberList

Member Port list of the port channel. Add the ports as a
aggregation member associated of a port-channel.

PortListr/w

Textual Convention: PortList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.4

laSystemChannelGroupID

The priority value assigned to System.
This 16-bit value is read-only.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.5

laPortChannelMode

Current Operating Channel Mode of the port
active(1) - it will always send frames along the configured links.
passive(2) - If the actor and partner are both in passive mode, they do not
exchange LAC…

Enumerationr/w

Enumerated Values:

1	active
2	passive
3	on
4	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.6

laChannelDetailTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.2 · 1 row entry · 6 columns

Open in standard view

A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel

laChannelDetailEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1

There is one entry in this table for each created port-channel port

Indexes

laChannelDetailPort

Column Syntax OID

laChannelDetailPort

The ifIndex of the port-channel(Aggregator's interface index).

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.1

laChannelDetailLACPTimeout

This object indicates LACP_Timeout to this Aggregation Port.
short(1) - LACP Timeout 3 seconds.
long (2) - LACP Timeout 90 seconds.

Enumerationr/w

Enumerated Values:

1	short
2	long

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.2

laChannelDetailWorkingMode

Enumerationr/w

Enumerated Values:

1	active
2	passive

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.3

laChannelDetailLACPState

This read-only object is used to display the port state in aggregation.

upInBndl(0) - The port is operationally up and actively
takes part in aggregation.
standby(1) - The po…

Enumeration

Enumerated Values:

0	upInBndl
1	standby
2	down
3	upIndividual

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.4

laChannelDetailPortPriority

Port Channel Detail Information Port Priority.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.5

laChannelDetailPortNumber

Port Channel Detail Information Port number.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.6

laChannelNeighborTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.3 · 1 row entry · 7 columns

Open in standard view

A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table.
This Port-channel table is indexed through Key values and allows to
configure link selection policy and the Mac address for
the port-channel. All other objects in this table displays
the details of the port-channel

laChannelNeighborEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1

There is one entry in this table for each created port-channel port

Indexes

laChannelNeighborPort

Column Syntax OID

laChannelNeighborPort

The ifIndex of the port-channel(Aggregator's interface index).

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.1

laChannelNeighborSystemPriority

Port Channel Neighbor Information Partner System Priority.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.2

laChannelNeighborSystemID

Port Channel Neighbor Information Partner System ID.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.3

laChannelNeighborPortNo

Port Channel Detail Information Port number.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.4

laChannelNeighborLACPTimeout

Port Channel Neighbor Information Partner LACP Timeout.

Enumeration

Enumerated Values:

1	short
2	long

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.5

laChannelNeighborWorkingMode

Port Channel Neighbor Information Partner LACP Timeout.

Enumeration

Enumerated Values:

1	active
2	passive

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.6

laChannelNeighborPortPriority

Port Channel Detail Information Port Priority.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.7

igsVlanFilterTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1 · 1 row entry · 10 columns

Open in standard view

This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is  
enabled in the system.

igsVlanFilterEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1

Contains snooping status , version and fast leave
configuration for a specific VLAN.

Indexes

igsVlanFilterVlanId

Column Syntax OID

igsVlanFilterVlanId

Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in IgsVlanFilterEntry is to be done.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.1

igsVlanSnoopStatus

This object allows you to enable/disable IGS function on a specific VLAN.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.2

igsVlanFastLeave

Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removin…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.4

igsVlanQuerier

Indicates whether the switch is configured as a querier in the VLAN

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.7

igsVlanCfgQuerier

The snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.8

igsVlanQuerierVersion

This object allows you to set igmp version function on a specific VLAN.

Enumerationr/w

Enumerated Values:

1	v1
2	v2
3	v3

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.9

igsVlanQueryInterval

This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in th…

Integer32r/w

Constraints:
range: 1-31744

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.10

igsVlanMaxResponseTime

The maximum query response time advertised General
queries on this interface.

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.11

igsVlanRobustnessValue

When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number for a specific VLAN
qu…

Integer32r/w

Constraints:
range: 1-7

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.12

igsVlanLastMemberQueryInterval

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.13

igsVlanMulticastGroupTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.2 · 1 row entry · 7 columns

Open in standard view

This table contains MAC based multicast forwarding 
information.

igsVlanMulticastGroupEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1

This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded.

Indexes

igsVlanMulticastGroupVlanId igsVlanMulticastGroupIpAddress igsVlanMulticastGroupReceiverPortIndex igsVlanMulticastGroupReceiverSrcAddr

Column	Syntax	OID
igsVlanMulticastGroupVlanId VLAN ID pertaining to the Multicast forwarding entry	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.1`
igsVlanMulticastGroupIpAddress Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.2`
igsVlanMulticastGroupReceiverPortIndex The interface on which the multicast group address is learnt.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.3`
igsVlanMulticastGroupReceiverSrcAddr The IP address of the multicast receiver that has sent the multicast report to join this group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.4`
igsVlanMulticastGroupMacAddress Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.5`
igsVlanMulticastGroupExp	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.7`
igsVlanMulticastGroupPortList List of ports onto which the multicast data packets destined for this group will be forwarded.	PortList Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.8`

igsVlanStaticMcastGrpTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.3 · 1 row entry · 4 columns

Open in standard view

This table contains IP based multicast forwarding 
information.

igsVlanStaticMcastGrpEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1

This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded.

Indexes

igsVlanStaticMcastGrpVlanId igsVlanStaticMcastGrpGroupAddress

Column Syntax OID

igsVlanStaticMcastGrpVlanId

VLAN ID pertaining to the Multicast forwarding entry

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1.1

igsVlanStaticMcastGrpGroupAddress

IP/IPv6 multicast group address

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1.2

igsVlanStaticMcastGrpPortList

List of ports onto which the multicast data
packets destined for this source and group will be forwarded.

PortListr/w

Textual Convention: PortList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1.3

igsVlanStaticMcastGrpRowStatus

The row status variable, used according to
row installation and removal conventions.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1.4

igsVlanRouterTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.2.4 · 1 row entry · 4 columns

Open in standard view

This table contains the list of ports through which 
a router, in a particular VLAN is reachable.

igsVlanRouterEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1

Contains the VLAN ID and list of ports on which
routers are present in the VLAN.

Indexes

igsVlanRouterVlanId

Column	Syntax	OID
igsVlanRouterVlanId VLAN ID of the ports through which router is reachable.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1.1`
igsVlanRouterStaticPortList List of static ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.	PortListr/w Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1.2`
igsVlanRouterBlockPortList List of ports which are configured statically as blocked router ports statically.	PortListr/w Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1.3`
igsVlanRouterDynamicPortList List of dynamic ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.	PortList Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1.4`

igsStatsTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1 · 1 row entry · 15 columns

Open in standard view

This table contains snooping statistics  
maintained by the switch. The statistics are
maintained on a per VLAN basis.

igsStatsEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1

Contains snooping statistics for a particular VLAN.

Indexes

igsStatsVlanId

Column	Syntax	OID
igsStatsVlanId VLAN ID for which snooping statistics are displayed	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.1`
igsStatsIGMPv1RxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.2`
igsStatsIGMPv1RxQueries	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.3`
igsStatsIGMPv1TxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.4`
igsStatsIGMPv1TxQueries	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.5`
igsStatsIGMPv2RxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.6`
igsStatsIGMPv2RxQueries	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.7`
igsStatsIGMPv2RxLeave	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.8`
igsStatsIGMPv2TxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.9`
igsStatsIGMPv2TxQueries	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.10`
igsStatsIGMPv2TxLeave	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.11`
igsStatsIGMPv3RxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.12`
igsStatsIGMPv3RxQueries	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.13`
igsStatsIGMPv3TxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.14`
igsStatsIGMPv3TxQueries	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.15`

mldVlanFilterTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1 · 1 row entry · 10 columns

Open in standard view

This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is  
enabled in the system.

mldVlanFilterEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1

Contains snooping status , version and fast leave
configuration for a specific VLAN.

Indexes

mldVlanFilterVlanId

Column Syntax OID

mldVlanFilterVlanId

Index of MldVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in MldVlanFilterEntry is to be done.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.1

mldVlanSnoopStatus

This object allows you to enable/disable IGS function on a specific VLAN.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.2

mldVlanFastLeave

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.4

mldVlanQuerier

Indicates whether the switch is configured as a querier in the VLAN

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.7

mldVlanCfgQuerier

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.8

mldVlanQuerierVersion

This object allows you to set igmp version function on a specific VLAN.

Enumerationr/w

Enumerated Values:

1	v1
2	v2
3	v3

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.9

mldVlanQueryInterval

Integer32r/w

Constraints:
range: 1-31744

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.10

mldVlanMaxResponseTime

The maximum query response time advertised General
queries on this interface.

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.11

mldVlanRobustnessValue

Integer32r/w

Constraints:
range: 1-7

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.12

mldVlanLastListenerQueryInterval

Integer32r/w

Constraints:
range: 1-25

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.13

mldVlanMulticastGroupTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.2 · 1 row entry · 7 columns

Open in standard view

This table contains MAC based multicast forwarding 
information.

mldVlanMulticastGroupEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1

This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded.

Indexes

mldVlanMulticastGroupVlanId mldVlanMulticastGroupIpAddress mldVlanMulticastGroupReceiverPortIndex mldVlanMulticastGroupReceiverSrcAddr

Column	Syntax	OID
mldVlanMulticastGroupVlanId VLAN ID pertaining to the Multicast forwarding entry	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.1`
mldVlanMulticastGroupIpAddress Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format.	Ipv6Address Textual Convention: Ipv6Address `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.2`
mldVlanMulticastGroupReceiverPortIndex The interface on which the multicast group address is learnt.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.3`
mldVlanMulticastGroupReceiverSrcAddr The IP address of the multicast receiver that has sent the multicast report to join this group.	Ipv6Address Textual Convention: Ipv6Address `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.4`
mldVlanMulticastGroupMacAddress Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.5`
mldVlanMulticastGroupExp	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.7`
mldVlanMulticastGroupPortList List of ports onto which the multicast data packets destined for this group will be forwarded.	PortList Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.8`

mldVlanStaticMcastGrpTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.3 · 1 row entry · 4 columns

Open in standard view

This table contains IP based multicast forwarding 
information.

mldVlanStaticMcastGrpEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1

This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded.

Indexes

mldVlanStaticMcastGrpVlanId mldVlanStaticMcastGrpGroupAddress

Column Syntax OID

mldVlanStaticMcastGrpVlanId

VLAN ID pertaining to the Multicast forwarding entry

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1.1

mldVlanStaticMcastGrpGroupAddress

IP/IPv6 multicast group address

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1.2

mldVlanStaticMcastGrpPortList

List of ports onto which the multicast data
packets destined for this source and group will be forwarded.

PortListr/w

Textual Convention: PortList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1.3

mldVlanStaticMcastGrpRowStatus

The row status variable, used according to
row installation and removal conventions.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1.4

mldVlanRouterTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.5.4 · 1 row entry · 4 columns

Open in standard view

This table contains the list of ports through which 
a router, in a particular VLAN is reachable.

mldVlanRouterEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1

Contains the VLAN ID and list of ports on which
routers are present in the VLAN.

Indexes

mldVlanRouterVlanId

Column	Syntax	OID
mldVlanRouterVlanId VLAN ID of the ports through which router is reachable.	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1.1`
mldVlanRouterStaticPortList List of static ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.	PortListr/w Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1.2`
mldVlanRouterBlockPortList List of ports which are configured statically as blocked router ports statically.	PortListr/w Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1.3`
mldVlanRouterDynamicPortList List of dynamic ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.	PortList Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1.4`

mldStatsTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1 · 1 row entry · 9 columns

Open in standard view

This table contains snooping statistics  
maintained by the switch. The statistics are
maintained on a per VLAN basis.

mldStatsEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1

Contains snooping statistics for a particular VLAN.

Indexes

mldStatsVlanId

Column	Syntax	OID
mldStatsVlanId VLAN ID for which snooping statistics are displayed	Integer32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.1`
mldStatsMLDv1RxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.2`
mldStatsMLDv1RxDone	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.3`
mldStatsMLDv1TxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.4`
mldStatsMLDv1TxDone	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.5`
mldStatsMLDv2RxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.6`
mldStatsMLDv2TxReport	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.7`
mldStatsRxQueries	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.8`
mldStatsTxQueries	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.9`

multicastFilterVlanTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.6.7 · 1 row entry · 2 columns

Open in standard view

A table to control multicast filtering modes.

multicastFilterVlanEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.6.7.1

An entry appears in this table for each interface in the mcastFiltertem.

Index to the table is the interface index of the VLAN.

Indexes

multicastFilterVlanIndex

Column Syntax OID

multicastFilterVlanIndex

VLAN index of the VLAN for which the configuration
in this entry applies.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.6.7.1.1

multicastFilterVlanType

Configures the multicast filtering modes as below :
forward -Forwards all unregistered groups.
filter -Filters all unregistered groups.

Enumerationr/w

Enumerated Values:

0	forward
1	filter

.1.3.6.1.4.1.171.10.139.2.1.4.6.7.1.2

lldpPortConfigTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.10 · 1 row entry · 6 columns

Open in standard view

The table that controls LLDP frame transmission on individual
ports.

lldpPortConfigEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.10.1

LLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table.

Indexes

lldpPortConfigPortNum

Column Syntax OID

lldpPortConfigPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.

The value of this object is used as a port index to the
lldpPortConfigT…

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.1

lldpPortConfigAdminStatus

The administratively desired status of the local LLDP agent.

If the associated lldpPortConfigAdminStatus object has a
value of 'txOnly(1)', then LLDP agent will transmit LLDP
frames on this port and it wi…

Enumerationr/w

Enumerated Values:

1	txOnly
2	rxOnly
3	txAndRx
4	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.2

lldpPortConfigSubtype

LLDP Port Settings Subtype.

Enumerationr/w

Enumerated Values:

1	local
2	macAddress

.1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.3

lldpPortConfigTLVsTxEnable

The lldpPortConfigTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type …

Bitsr/w

Enumerated Values:

0	portDesc
1	sysName
2	sysDesc
3	sysCap

.1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.4

lldpPortStatsClear

trigger port statisc clear..

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.5

lldpPortNeighborClear

trigger port neighbor info clear..

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.6

lldpConfigManAddrTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.11 · 1 row entry · 3 columns

Open in standard view

The table that controls selection of LLDP management address
TLV instances to be transmitted on individual ports.

lldpConfigManAddrEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.11.1

LLDP configuration information that specifies the set
of ports (represented as a PortList) on which the local
system management address instance will be transmitted.

Each active lldpConfigManAddrEntry must …

Indexes

lldpConfigManAddrSubtype lldpConfigManAddr

Column Syntax OID

lldpConfigManAddrSubtype

The type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.

IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers

Textual Convention: IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	all802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164withNsap
16	dns
17	distinguishedName
18	asNumber
19	xtpOverIpv4
20	xtpOverIpv6
21	xtpNativeModeXTP
22	fibreChannelWWPN
23	fibreChannelWWNN
24	gwid
25	afi
26	mplsTpSectionEndpointIdentifier
27	mplsTpLspEndpointIdentifier
28	mplsTpPseudowireEndpointIdentifier
29	mtipmultitopologyipversion4
30	mtipv6multitopologyipversion6
31	bgpSfc
16384	eigrpCommonServiceFamily
16385	eigrpIpv4ServiceFamily
16386	eigrpIpv6ServiceFamily
16387	lispCanonicalAddressFormat
16388	bgpLs
16389	fortyeightBitMac
16390	sixtyfourBitMac
16391	oui
16392	mac24
16393	mac40
16394	ipv664
16395	rBridgePortID
16396	trillNickname
16397	universallyUniqueIdentifier
16398	routingPolicyAfi
16399	mplsNamespaces
65535	reserved

.1.3.6.1.4.1.171.10.139.2.1.4.7.11.1.1

lldpConfigManAddr

The string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.4.7.11.1.2

lldpConfigManAddrPortsTxEnable

A set of ports that are identified by a PortList, in which
each port is represented as a bit. The corresponding local
system management address instance will be transmitted on the
member ports of the lldpManAddrPortsTx…

LldpPortListr/w

Textual Convention: LldpPortList OctetString

Type Constraints:
range: 0..512

.1.3.6.1.4.1.171.10.139.2.1.4.7.11.1.3

lldpXdot1ConfigPortVlanTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.1 · 1 row entry · 2 columns

Open in standard view

A table that controls selection of LLDP Port VLAN-ID TLVs
to be transmitted on individual ports.

lldpXdot1ConfigPortVlanEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.1.1

LLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Port
VLAN-ID TLV on LLDP transmission capable ports.

Each active lldpConfigEntry must be res…

Indexes

lldpXdot1ConfigVlanPortNum

Column Syntax OID

lldpXdot1ConfigVlanPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.1.1.1

lldpXdot1ConfigPortVlanTxEnable

The lldpXdot1ConfigPortVlanTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a give…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.1.1.2

lldpXdot1ConfigVlanNameTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.2 · 1 row entry · 2 columns

Open in standard view

The table that controls selection of LLDP VLAN name TLV
instances to be transmitted on individual ports.

lldpXdot1ConfigVlanNameEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.2.1

LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
VLAN name instance will be transmitted.

Each active lldpXdot1ConfigVlanNameEntry must be …

Indexes

lldpXdot1LocConfigVlanNamePortNum

Column	Syntax	OID
lldpXdot1LocConfigVlanNamePortNum The value of this object is used as a port index to the lldpXdot3LocPortTable.	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.2.1.1`
lldpXdot1ConfigVlanNameTxEnableVlanList The value that indicates whether the corresponding Local System VLAN name instance will be transmitted on this port	OctetStringr/w Constraints: `range: 0-512`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.2.1.2`

lldpXdot1ConfigProtoVlanTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.3 · 1 row entry · 2 columns

Open in standard view

The table that controls selection of LLDP Port and Protocol
VLAN ID TLV instances to be transmitted on individual ports.

lldpXdot1ConfigProtoVlanEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.3.1

LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol VLAN instance will be transmitted.

This configuration object augments the lldpXd…

Indexes

lldpXdot1ConfigProtoVlanPortNum

Column Syntax OID

lldpXdot1ConfigProtoVlanPortNum

The value of this object is used as a port index to the
lldpXdot3LocPortTable.

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.3.1.1

lldpXdot1ConfigProtoVlanTxEnable

The boolean value that indicates whether the corresponding
Local System Port and Protocol VLAN instance will
be transmitted on the port defined by the given
lldpXdot1LocProtoVlanEntry.

The value of this o…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.3.1.2

lldpXdot1ConfigProtocolTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4 · 1 row entry · 3 columns

Open in standard view

The table that controls selection of LLDP Protocol
TLV instances to be transmitted on individual ports.

lldpXdot1ConfigProtocolEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4.1

LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol instance will be transmitted.

Each active lldpXdot1ConfigProtocolEntry must be r…

Indexes

lldpXdot1ConfigProtocolPortNum lldpXdot1ConfigProtocolIndex

Column Syntax OID

lldpXdot1ConfigProtocolPortNum

The value of this object is used as a port index to the
lldpXdot1ConfigProtocolTable.

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4.1.1

lldpXdot1ConfigProtocolIndex

This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4.1.2

lldpXdot1ConfigProtocolTxEnable

The boolean value that indicates whether the corresponding
Local System Protocol Identity instance will be transmitted
on the port defined by the given lldpXdot1LocProtocolEntry.

The value of this object …

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4.1.3

lldpXdot1LocTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.1 · 1 row entry · 2 columns

Open in standard view

This table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent.

lldpXdot1LocEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.1.1

Information about IEEE 802.1 organizationally defined
LLDP extension.

Indexes

lldpXdot1LocPortNum

Column	Syntax	OID
lldpXdot1LocPortNum The value of this object is used as a port index to the lldpXdot1LocTable.	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.1.1.1`
lldpXdot1LocPortVlanId The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support port-based VLAN operation.	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.1.1.2`

lldpXdot1LocProtoVlanTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2 · 1 row entry · 4 columns

Open in standard view

This table contains one or more rows per Port and Protocol
VLAN information about the local system.

lldpXdot1LocProtoVlanEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1

Port and protocol VLAN ID Information about a particular
port component. There may be multiple port and protocol VLANs,
identified by a particular lldpXdot1LocProtoVlanId, configured
on the given port.

Indexes

lldpXdot1LocProtoVlanPortNum lldpXdot1LocProtoVlanId

Column Syntax OID

lldpXdot1LocProtoVlanPortNum

The value of this object is used as a port index to the
lldpXdot1LocTable.

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1.1

lldpXdot1LocProtoVlanId

The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPV…

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1.2

lldpXdot1LocProtoVlanSupported

The truth value used to indicate whether the given port
(associated with the local system) supports port and protocol
VLANs.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1.3

lldpXdot1LocProtoVlanEnabled

The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the local system.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1.4

lldpXdot1LocVlanNameTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3 · 1 row entry · 3 columns

Open in standard view

This table contains one or more rows per IEEE 802.1Q VLAN
name information on the local system known to this agent.

lldpXdot1LocVlanNameEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3.1

VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1LocVlanId, configured on the given port.

Indexes

lldpXdot1LocVlanNamePortNum lldpXdot1LocVlanId

Column	Syntax	OID
lldpXdot1LocVlanNamePortNum The value of this object is used as a port index to the lldpXdot1LocVlanNameTable.	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3.1.1`
lldpXdot1LocVlanId The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible.	Q-BRIDGE-MIBVlanId Textual Convention: Q-BRIDGE-MIBVlanId `Integer32` Type Constraints: `range: 1..4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3.1.2`
lldpXdot1LocVlanName The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in…	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3.1.3`

lldpXdot1LocProtocolTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4 · 1 row entry · 3 columns

Open in standard view

This table contains one or more rows per protocol identity
information on the local system known to this agent.

lldpXdot1LocProtocolEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4.1

Information about particular protocols that are accessible
through the given port component.

There may be multiple protocols, identified by particular
lldpXdot1ProtocolIndex, and lldpLocPortNum.

Indexes

lldpXdot1LocProtocolPortNum lldpXdot1LocProtocolIndex

Column	Syntax	OID
lldpXdot1LocProtocolPortNum The value of this object is used as a port index to the lldpXdot1LocProtocolTable.	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4.1.1`
lldpXdot1LocProtocolIndex This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4.1.2`
lldpXdot1LocProtocolId The octet string value used to identify the protocols associated with the given port of the local system.	OctetString Constraints: `range: 1-255`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4.1.3`

lldpXdot1RemTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1 · 1 row entry · 4 columns

Open in standard view

This table contains one or more rows per physical network
connection known to this agent.  The agent may wish to
ensure that only one lldpXdot1RemEntry is present for
each local port, or it may choose to maintain multiple
lldpXdot1RemEntries for the same local port.

lldpXdot1RemEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1

Information about a particular port component.

Indexes

lldpXdot1RemTimeMark lldpXdot1RemLocalPortNum lldpXdot1RemIndex

Column	Syntax	OID
lldpXdot1RemTimeMark A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.	TimeFilter Textual Convention: TimeFilter `Unsigned32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1.1`
lldpXdot1RemLocalPortNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemLocalPortNum identifies the port on which the remote system informatio…	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1.2`
lldpXdot1RemIndex This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monot…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1.3`
lldpXdot1RemPortVlanId The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support port-based VLAN operation, the value of lldpXdot1R…	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1.4`

lldpXdot1RemProtoVlanTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2 · 1 row entry · 6 columns

Open in standard view

This table contains one or more rows per Port and Protocol
VLAN information about the remote system, received on the
given port.

lldpXdot1RemProtoVlanEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1

Port and protocol VLAN name Information about a particular
port component. There may be multiple protocol VLANs,
identified by a particular lldpXdot1RemProtoVlanId, configured
on the remote system.

Indexes

lldpXdot1RemProtoVlanTimeMark lldpXdot1RemProtoVlanLocalPortNum lldpXdot1RemProtoVlanIndex lldpXdot1RemProtoVlanId

Column Syntax OID

lldpXdot1RemProtoVlanTimeMark

A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

TimeFilter

Textual Convention: TimeFilter Unsigned32

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.1

lldpXdot1RemProtoVlanLocalPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The ldpXdot1RemLocalPortNum
identifies the port on which the remote system informatio…

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.2

lldpXdot1RemProtoVlanIndex

This object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.

An agent is encouraged to assign monot…

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.3

lldpXdot1RemProtoVlanId

The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.

If port and protocol VLANs are not supported on the given
port associated w…

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.4

lldpXdot1RemProtoVlanSupported

The truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.5

lldpXdot1RemProtoVlanEnabled

The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.6

lldpXdot1RemVlanNameTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3 · 1 row entry · 5 columns

Open in standard view

This table contains one or more rows per IEEE 802.1Q VLAN
name information about the remote system, received on the
given port.

lldpXdot1RemVlanNameEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1

VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1RemVlanId, received on the given port.

Indexes

lldpXdot1RemVlanNameTimeMark lldpXdot1RemVlanNameLocalPortNum lldpXdot1RemVlanNameIndex lldpXdot1RemVlanId

Column	Syntax	OID
lldpXdot1RemVlanNameTimeMark A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.	TimeFilter Textual Convention: TimeFilter `Unsigned32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.1`
lldpXdot1RemVlanNameLocalPortNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemVlanNameLocalPortNum identifies the port on which the remote system in…	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.2`
lldpXdot1RemVlanNameIndex This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monot…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.3`
lldpXdot1RemVlanId The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible.	Q-BRIDGE-MIBVlanId Textual Convention: Q-BRIDGE-MIBVlanId `Integer32` Type Constraints: `range: 1..4094`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.4`
lldpXdot1RemVlanName The string value used to identify VLAN name identified by the VLAN Id associated with the remote system.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.5`

lldpXdot1RemProtocolTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4 · 1 row entry · 5 columns

Open in standard view

This table contains one or more rows per protocol information
about the remote system, received on the given port.

lldpXdot1RemProtocolEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1

Protocol information about a particular port component.
There may be multiple protocols, identified by a particular
lldpXdot1ProtocolIndex, received on the given port.

Indexes

lldpXdot1RemProtocolTimeMark lldpXdot1RemProtocolLocalPortNum lldpXdot1RemProtocolIndex lldpXdot1RemProtocolIdIndex

Column	Syntax	OID
lldpXdot1RemProtocolTimeMark A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.	TimeFilter Textual Convention: TimeFilter `Unsigned32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.1`
lldpXdot1RemProtocolLocalPortNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemProtocolLocalPortNum identifies the port on which the remote system in…	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.2`
lldpXdot1RemProtocolIndex This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monot…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.3`
lldpXdot1RemProtocolIdIndex This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.4`
lldpXdot1RemProtocolId The octet string value used to identify the protocols associated with the given port of remote system.	OctetString Constraints: `range: 1-255`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.5`

lldpXdot3PortConfigTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.1.1 · 1 row entry · 2 columns

Open in standard view

A table that controls selection of LLDP TLVs to be transmitted 
on individual ports.

lldpXdot3PortConfigEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.1.1.1

LLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.

Each active lldpXdot3PortConfigEntry must be from non-volatile
s…

Indexes

lldpXdot3PortConfigPortNum

Column Syntax OID

lldpXdot3PortConfigPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.1.1.1.1

lldpXdot3PortConfigTLVsTxEnable

The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in t…

Bitsr/w

Enumerated Values:

0	macPhyConfigStatus
1	powerViaMDI
2	linkAggregation
3	maxFrameSize

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.1.1.1.2

lldpXdot3LocPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1 · 1 row entry · 5 columns

Open in standard view

This table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.

lldpXdot3LocPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1

Information about a particular port component.

Indexes

lldpXdot3LocPortNum

Column Syntax OID

lldpXdot3LocPortNum

The value of this object is used as a port index to the
lldpXdot3LocPortTable.

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.1

lldpXdot3LocPortAutoNegSupported

The truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.2

lldpXdot3LocPortAutoNegEnabled

The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.3

lldpXdot3LocPortAutoNegAdvertisedCap

This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.4

lldpXdot3LocPortOperMauType

An integer value that indicates the operational MAU type
of the given port on the local system.

This object contains the integer value derived from the
list position of the corresponding dot3MauType as li…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.5

lldpXdot3LocPowerTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2 · 1 row entry · 7 columns

Open in standard view

This table contains one row per port of power ethernet 
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.

lldpXdot3LocPowerEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1

Information about a particular port component.

Indexes

lldpXdot3LocPowerPortNum

Column Syntax OID

lldpXdot3LocPowerPortNum

The value of this object is used as a port index to the
lldpXdot3LocPortTable.

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.1

lldpXdot3LocPowerPortClass

The value that identifies the port Class of the given port
associated with the local system.

LldpPowerPortClass

Textual Convention: LldpPowerPortClass Enumeration

Type Values:

1	pClassPSE
2	pClassPD

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.2

lldpXdot3LocPowerMDISupported

The truth value used to indicate whether the MDI power is
supported on the given port associated with the local system.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.3

lldpXdot3LocPowerMDIEnabled

The truth value used to identify whether MDI power is
enabled on the given port associated with the local system.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.4

lldpXdot3LocPowerPairControlable

The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with t…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.5

lldpXdot3LocPowerPairs

This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.6

lldpXdot3LocPowerClass

This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.7

lldpXdot3LocLinkAggTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3 · 1 row entry · 3 columns

Open in standard view

This table contains one row per port of link aggregation 
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.

lldpXdot3LocLinkAggEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3.1

Link Aggregation information about a particular port
component.

Indexes

lldpXdot3LocLinkAggPortNum

Column Syntax OID

lldpXdot3LocLinkAggPortNum

The value of this object is used as a port index to the
lldpXdot3LocPortTable.

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3.1.1

lldpXdot3LocLinkAggStatus

The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.

LldpLinkAggStatusMap

Textual Convention: LldpLinkAggStatusMap Bits

Type Values:

0	aggCapable
1	aggEnabled

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3.1.2

lldpXdot3LocLinkAggPortId

This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.

If the port i…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3.1.3

lldpXdot3LocMaxFrameSizeTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.4 · 1 row entry · 2 columns

Open in standard view

This table contains one row per port of maximum frame 
size information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.

lldpXdot3LocMaxFrameSizeEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.4.1

Maximum Frame Size information about a particular port
component.

Indexes

lldpXdot3LocMaxFrameSizePortNum

Column	Syntax	OID
lldpXdot3LocMaxFrameSizePortNum The value of this object is used as a port index to the lldpXdot3LocMaxFrameSizeTable.	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.4.1.1`
lldpXdot3LocMaxFrameSize An integer value indicating the maximum supported frame size in octets on the given port of the local system.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.4.1.2`

lldpXdot3RemPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1 · 1 row entry · 7 columns

Open in standard view

This table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system.

lldpXdot3RemPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1

Information about a particular physical network connection.

Indexes

lldpXdot3RemTimeMark lldpXdot3RemLocalPortNum lldpXdot3RemIndex

Column Syntax OID

lldpXdot3RemTimeMark

A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

TimeFilter

Textual Convention: TimeFilter Unsigned32

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.1

lldpXdot3RemLocalPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpXdot3RemLocalPortNum
identifies the port on which the remote system informati…

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.2

lldpXdot3RemIndex

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.3

lldpXdot3RemPortAutoNegSupported

The truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.4

lldpXdot3RemPortAutoNegEnabled

The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.5

lldpXdot3RemPortAutoNegAdvertisedCap

This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.6

lldpXdot3RemPortOperMauType

An integer value that indicates the operational MAU type
of the sending device.

This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF …

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.7

lldpXdot3RemPowerTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2 · 1 row entry · 9 columns

Open in standard view

This table contains Ethernet power information (as a part
of the LLDP 802.3 organizational extension) of the remote
system.

lldpXdot3RemPowerEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1

Information about a particular physical network connection.

Indexes

lldpXdot3RemPowerTimeMark lldpXdot3RemPowerLocalPortNum lldpXdot3RemPowerIndex

Column Syntax OID

lldpXdot3RemPowerTimeMark

A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

TimeFilter

Textual Convention: TimeFilter Unsigned32

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.1

lldpXdot3RemPowerLocalPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.2

lldpXdot3RemPowerIndex

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.3

lldpXdot3RemPowerPortClass

The value that identifies the port Class of the given port
associated with the remote system.

LldpPowerPortClass

Textual Convention: LldpPowerPortClass Enumeration

Type Values:

1	pClassPSE
2	pClassPD

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.4

lldpXdot3RemPowerMDISupported

The truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.5

lldpXdot3RemPowerMDIEnabled

The truth value used to identify whether MDI power is
enabled on the given port associated with the remote system.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.6

lldpXdot3RemPowerPairControlable

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.7

lldpXdot3RemPowerPairs

This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.8

lldpXdot3RemPowerClass

This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.9

lldpXdot3RemLinkAggTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3 · 1 row entry · 5 columns

Open in standard view

This table contains port link aggregation information
(as a part of the LLDP 802.3 organizational extension)
of the remote system.

lldpXdot3RemLinkAggEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1

Link Aggregation information about remote system's port
component.

Indexes

lldpXdot3RemLinkAggTimeMark lldpXdot3RemLinkAggLocalPortNum lldpXdot3RemLinkAggIndex

Column Syntax OID

lldpXdot3RemLinkAggTimeMark

A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

TimeFilter

Textual Convention: TimeFilter Unsigned32

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.1

lldpXdot3RemLinkAggLocalPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.2

lldpXdot3RemLinkAggIndex

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.3

lldpXdot3RemLinkAggStatus

The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.

LldpLinkAggStatusMap

Textual Convention: LldpLinkAggStatusMap Bits

Type Values:

0	aggCapable
1	aggEnabled

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.4

lldpXdot3RemLinkAggPortId

This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.5

lldpXdot3RemMaxFrameSizeTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4 · 1 row entry · 4 columns

Open in standard view

This table contains one row per port of maximum frame 
size information (as a part of the LLDP 802.3 organizational
extension) of the remote system.

lldpXdot3RemMaxFrameSizeEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1

Maximum Frame Size information about a particular port
component.

Indexes

lldpXdot3RemMaxFrameSizeTimeMark lldpXdot3RemMaxFrameSizeLocalPortNum lldpXdot3RemMaxFrameSizeIndex

Column	Syntax	OID
lldpXdot3RemMaxFrameSizeTimeMark A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.	TimeFilter Textual Convention: TimeFilter `Unsigned32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1.1`
lldpXdot3RemMaxFrameSizeLocalPortNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortNum identifies the port on which the remote system informati…	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1.2`
lldpXdot3RemMaxFrameSizeIndex This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monot…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1.3`
lldpXdot3RemMaxFrameSize An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1.4`

lldpStatsTxPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.15.6 · 1 row entry · 2 columns

Open in standard view

A table containing LLDP transmission statistics for
individual ports.  Entries are not required to exist in
this table while the lldpPortConfigEntry object is equal to
'disabled(4)'.

lldpStatsTxPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.15.6.1

LLDP frame transmission statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.

All counter values in a particular entry shall be
maintained on a continuing basis…

Indexes

lldpStatsTxPortNum

Column	Syntax	OID
lldpStatsTxPortNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.6.1.1`
lldpStatsTxPortFramesTotal The number of LLDP frames transmitted by this LLDP agent on the indicated port.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.6.1.2`

lldpRxStatsPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.15.7 · 1 row entry · 7 columns

Open in standard view

A table containing LLDP reception statistics for individual
ports.  Entries are not required to exist in this table while
the lldpPortConfigEntry object is equal to 'disabled(4)'.

lldpRxStatsPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1

LLDP frame reception statistics for a particular port.
The port must be contained in the same chassis as the
LLDP agent.

All counter values in a particular entry shall be
maintained on a continuing basis an…

Indexes

lldpStatsRxPortNum

Column	Syntax	OID
lldpStatsRxPortNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.1`
lldpStatsRxPortFramesDiscardedTotal The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLDP header formating problems may exist with the local LLDP ag…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.2`
lldpStatsRxPortFramesErrors The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.3`
lldpStatsRxPortFramesTotal The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.4`
lldpStatsRxPortTLVsDiscardedTotal The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.5`
lldpStatsRxPortTLVsUnrecognizedTotal The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the TLV whose type value is in the range of reser…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.6`
lldpStatsRxPortAgeoutsTotal The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained…	ZeroBasedCounter32 Textual Convention: ZeroBasedCounter32 `Unsigned32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.7`

lldpLocPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.7 · 1 row entry · 4 columns

Open in standard view

This table contains one or more rows per port information
associated with the local system known to this agent.

lldpLocPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1

Information about a particular port component.

Entries may be created and deleted in this table by the
agent.

Indexes

lldpLocPortNum

Column Syntax OID

lldpLocPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1.1

lldpLocPortIdSubtype

The type of port identifier encoding used in the associated
'lldpLocPortId' object.

Enumeration

Enumerated Values:

1	local
2	macAddress

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1.2

lldpLocPortId

The string value used to identify the port component
associated with a given port in the local system.

OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1.3

lldpLocPortDesc

The string value used to identify the 802 LAN station's port
description associated with the local system. If the local
agent supports IETF RFC 2863, lldpLocPortDesc object should
have the same value of ifDescr object.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1.4

lldpLocManAddrTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.8 · 1 row entry · 6 columns

Open in standard view

This table contains management address information on the
local system known to this agent.

lldpLocManAddrEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1

Management address information about a particular chassis
component. There may be multiple management addresses
configured on the system identified by a particular
lldpLocChassisId. Each management address should have…

Indexes

lldpLocManAddrSubtype lldpLocManAddr

Column Syntax OID

lldpLocManAddrSubtype

The type of management address identifier encoding used in
the associated 'lldpLocManagmentAddr' object.

IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers

Textual Convention: IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	all802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164withNsap
16	dns
17	distinguishedName
18	asNumber
19	xtpOverIpv4
20	xtpOverIpv6
21	xtpNativeModeXTP
22	fibreChannelWWPN
23	fibreChannelWWNN
24	gwid
25	afi
26	mplsTpSectionEndpointIdentifier
27	mplsTpLspEndpointIdentifier
28	mplsTpPseudowireEndpointIdentifier
29	mtipmultitopologyipversion4
30	mtipv6multitopologyipversion6
31	bgpSfc
16384	eigrpCommonServiceFamily
16385	eigrpIpv4ServiceFamily
16386	eigrpIpv6ServiceFamily
16387	lispCanonicalAddressFormat
16388	bgpLs
16389	fortyeightBitMac
16390	sixtyfourBitMac
16391	oui
16392	mac24
16393	mac40
16394	ipv664
16395	rBridgePortID
16396	trillNickname
16397	universallyUniqueIdentifier
16398	routingPolicyAfi
16399	mplsNamespaces
65535	reserved

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.1

lldpLocManAddr

The string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.2

lldpLocManAddrLen

The total length of the management address subtype and the
management address fields in LLDPDUs transmitted by the
local LLDP agent.

The management address length field is needed so that the
receiving sys…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.3

lldpLocManAddrIfSubtype

The enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the local system.

LldpManAddrIfSubtype

Textual Convention: LldpManAddrIfSubtype Enumeration

Type Values:

1	unknown
2	ifIndex
3	systemPortNumber

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.4

lldpLocManAddrIfId

The integer value used to identify the interface number
regarding the management address component associated with
the local system.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.5

lldpLocManAddrOID

The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the local system agent.

ObjectIdentifier

.1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.6

lldpRemTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1 · 1 row entry · 12 columns

Open in standard view

This table contains one or more rows per physical network
connection known to this agent.  The agent may wish to ensure
that only one lldpRemEntry is present for each local port,
or it may choose to maintain multiple lldpRemEntries for
the same local port.
          
The following procedure may be used to retrieve remote
systems information updates from an LLDP agent:
          
   1. NMS polls all tables associated with remote systems
      and keeps a local copy of the information retrieved.
      NMS polls periodically the values of the following
      objects:
         a. lldpStatsRemTablesInserts
         b. lldpStatsRemTablesDeletes
         c. lldpStatsRemTablesDrops
         d. lldpStatsRemTablesAgeouts
         e. lldpStatsRxPortAgeoutsTotal for all ports.
          
   2. LLDP agent updates remote systems MIB objects, and
      sends out notifications to a list of notification
      destinations.
          
   3. NMS receives the notifications and compares the new
      values of objects listed in step 1.
          
      Periodically, NMS should poll the object
      lldpStatsRemTablesLastChangeTime to find out if anything
      has changed since the last poll.  if something has
      changed, NMS will poll the objects listed in step 1 to
      figure out what kind of changes occurred in the tables.
          
      if value of lldpStatsRemTablesInserts has changed,
      then NMS will walk all tables by employing TimeFilter
      with the last-polled time value.  This request will
      return new objects or objects whose values are updated
      since the last poll.
          
      if value of lldpStatsRemTablesAgeouts has changed,
      then NMS will walk the lldpStatsRxPortAgeoutsTotal and
      compare the new values with previously recorded ones.
      For ports whose lldpStatsRxPortAgeoutsTotal value is
      greater than the recorded value, NMS will have to
      retrieve objects associated with those ports from
      table(s) without employing a TimeFilter (which is
      performed by specifying 0 for the TimeFilter.)
          
      lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops
      objects are provided for informational purposes.

lldpRemEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1

Information about a particular physical network connection.
Entries may be created and deleted in this table by the agent,
if a physical topology discovery process is active.

Indexes

lldpRemTimeMark lldpRemLocalPortNum lldpRemIndex

Column Syntax OID

lldpRemTimeMark

A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

TimeFilter

Textual Convention: TimeFilter Unsigned32

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.1

lldpRemLocalPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemLocalPortNum
identifies the port on which the remote system information
is…

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.2

lldpRemIndex

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.3

lldpRemChassisIdSubtype

The type of encoding used to identify the chassis associated
with the remote system.

LldpChassisIdSubtype

Textual Convention: LldpChassisIdSubtype Enumeration

Type Values:

1	chassisComponent
2	interfaceAlias
3	portComponent
4	macAddress
5	networkAddress
6	interfaceName
7	local

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.4

lldpRemChassisId

The string value used to identify the chassis component
associated with the remote system.

LldpChassisId

Textual Convention: LldpChassisId OctetString

Type Constraints:
range: 1..255

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.5

lldpRemPortIdSubtype

The type of port identifier encoding used in the associated
'lldpRemPortId' object.

LldpPortIdSubtype

Textual Convention: LldpPortIdSubtype Enumeration

Type Values:

1	interfaceAlias
2	portComponent
3	macAddress
4	networkAddress
5	interfaceName
6	agentCircuitId
7	local

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.6

lldpRemPortId

The string value used to identify the port component
associated with the remote system.

LldpPortId

Textual Convention: LldpPortId OctetString

Type Constraints:
range: 1..255

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.7

lldpRemPortDesc

The string value used to identify the description of
the given port associated with the remote system.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.8

lldpRemSysName

The string value used to identify the system name of the
remote system.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.9

lldpRemSysDesc

The string value used to identify the system description
of the remote system.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.10

lldpRemSysCapSupported

The bitmap value used to identify which system capabilities
are supported on the remote system.

LldpSystemCapabilitiesMap

Textual Convention: LldpSystemCapabilitiesMap Bits

Type Values:

0	other
1	repeater
2	bridge
3	wlanAccessPoint
4	router
5	telephone
6	docsisCableDevice
7	stationOnly

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.11

lldpRemSysCapEnabled

The bitmap value used to identify which system capabilities
are enabled on the remote system.

LldpSystemCapabilitiesMap

Textual Convention: LldpSystemCapabilitiesMap Bits

Type Values:

0	other
1	repeater
2	bridge
3	wlanAccessPoint
4	router
5	telephone
6	docsisCableDevice
7	stationOnly

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.12

lldpRemManAddrTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2 · 1 row entry · 8 columns

Open in standard view

This table contains one or more rows per management address
information on the remote system learned on a particular port
contained in the local chassis known to this agent.

lldpRemManAddrEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1

Management address information about a particular chassis
component. There may be multiple management addresses
configured on the remote system identified by a particular
lldpRemIndex whose information is received on
l…

Indexes

lldpRemManTimeMark lldpRemManLocalPortNum lldpRemManIndex lldpRemManAddrSubtype lldpRemManAddr

Column Syntax OID

lldpRemManTimeMark

A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

TimeFilter

Textual Convention: TimeFilter Unsigned32

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.1

lldpRemManLocalPortNum

The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The lldpRemManLocalPortNum
identifies the port on which the remote system information…

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.2

lldpRemManIndex

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.3

lldpRemManAddrSubtype

The type of management address identifier encoding used in
the associated 'lldpRemManagmentAddr' object.

IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers

Textual Convention: IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers Enumeration

Type Values:

0	other
1	ipV4
2	ipV6
3	nsap
4	hdlc
5	bbn1822
6	all802
7	e163
8	e164
9	f69
10	x121
11	ipx
12	appleTalk
13	decnetIV
14	banyanVines
15	e164withNsap
16	dns
17	distinguishedName
18	asNumber
19	xtpOverIpv4
20	xtpOverIpv6
21	xtpNativeModeXTP
22	fibreChannelWWPN
23	fibreChannelWWNN
24	gwid
25	afi
26	mplsTpSectionEndpointIdentifier
27	mplsTpLspEndpointIdentifier
28	mplsTpPseudowireEndpointIdentifier
29	mtipmultitopologyipversion4
30	mtipv6multitopologyipversion6
31	bgpSfc
16384	eigrpCommonServiceFamily
16385	eigrpIpv4ServiceFamily
16386	eigrpIpv6ServiceFamily
16387	lispCanonicalAddressFormat
16388	bgpLs
16389	fortyeightBitMac
16390	sixtyfourBitMac
16391	oui
16392	mac24
16393	mac40
16394	ipv664
16395	rBridgePortID
16396	trillNickname
16397	universallyUniqueIdentifier
16398	routingPolicyAfi
16399	mplsNamespaces
65535	reserved

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.4

lldpRemManAddr

The string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.5

lldpRemManAddrIfSubtype

The enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the remote system.

LldpManAddrIfSubtype

Textual Convention: LldpManAddrIfSubtype Enumeration

Type Values:

1	unknown
2	ifIndex
3	systemPortNumber

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.6

lldpRemManAddrIfId

The integer value used to identify the interface number
regarding the management address component associated with
the remote system.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.7

lldpRemManAddrOID

The OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent.

ObjectIdentifier

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.8

lldpRemUnknownTLVTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.17.3 · 1 row entry · 5 columns

Open in standard view

This table contains information about an incoming TLV which
is not recognized by the receiving LLDP agent.  The TLV may
be from a later version of the basic management set.
          
This table should only contain TLVs that are found in
a single LLDP frame.  Entries in this table, associated
with an MAC service access point (MSAP, the access point
for MAC services provided to the LCC sublayer, defined
in IEEE 100, which is also identified with a particular
lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with
most recently received unrecognized TLV from the same MSAP,
or they will naturally age out when the rxInfoTTL timer
(associated with the MSAP) expires.

lldpRemUnknownTLVEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1

Information about an unrecognized TLV received from a
physical network connection. Entries may be created and
deleted in this table by the agent, if a physical topology
discovery process is active.

Indexes

lldpRemUnknownTimeMark lldpRemUnknownLocalPortNum lldpRemUnknownIndex lldpRemUnknownTLVType

Column	Syntax	OID
lldpRemUnknownTimeMark A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.	TimeFilter Textual Convention: TimeFilter `Unsigned32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.1`
lldpRemUnknownLocalPortNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemUnknownLocalPortNum identifies the port on which the remote system informa…	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.2`
lldpRemUnknownIndex This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monot…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.3`
lldpRemUnknownTLVType This object represents the value extracted from the type field of the TLV.	Integer32 Constraints: `range: 9-126`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.4`
lldpRemUnknownTLVInfo This object represents the value extracted from the value field of the TLV.	OctetString Constraints: `range: 0-511`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.5`

lldpXMedPortConfigTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2 · 1 row entry · 4 columns

Open in standard view

A table that controls selection of LLDP TLVs to be transmitted
on individual ports.

lldpXMedPortConfigEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1

LLDP configuration information that controls the
transmission of the MED organizationally defined TLVs on
LLDP transmission capable ports.

This configuration object augments the lldpPortConfigEntry of
the L…

Indexes

lldpXMedPortConfigPortNum

Column Syntax OID

lldpXMedPortConfigPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1.1

lldpXMedPortCapSupported

The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible for the respective port
on the LLDP agent of the device. Each bit in the bitmap corresponds
to an LLDP-MED subtype ass…

LldpXMedCapabilities

Textual Convention: LldpXMedCapabilities Bits

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1.2

lldpXMedPortConfigTLVsTxEnable

The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap,
includes the MED organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitma…

LldpXMedCapabilitiesr/w

Textual Convention: LldpXMedCapabilities Bits

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1.3

lldpXMedPortConfigNotifEnable

A value of 'true(1)' enables sending the topology change
traps on this port.
A value of 'false(2)' disables sending the topology change
traps on this port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1.4

lldpXMedLocMediaPolicyTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1 · 1 row entry · 7 columns

Open in standard view

This table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent.

lldpXMedLocMediaPolicyEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1

Information about a particular policy on a specific
port component.

Indexes

lldpXMedLocMediaPolicyPortNum lldpXMedLocMediaPolicyAppType

Column Syntax OID

lldpXMedLocMediaPolicyPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.1

lldpXMedLocMediaPolicyAppType

The media type that defines the primary function of the
application for the policy advertised by an endpoint.

PolicyAppType

Textual Convention: PolicyAppType Bits

Type Values:

0	unknown
1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softPhoneVoice
6	videoconferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.2

lldpXMedLocMediaPolicyVlanID

An extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.

A value of 1 through 4094 is used to define a valid PVID.

A value of 0 shall be used if the device is using…

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.3

lldpXMedLocMediaPolicyPriority

This object contains the value of the 802.1p priority
which is associated with the given port on the
local system.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.4

lldpXMedLocMediaPolicyDscp

This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with the given port on the local system.

DIFFSERV-DSCP-TCDscp

Textual Convention: DIFFSERV-DSCP-TCDscp Integer32

Type Constraints:
range: 0..63

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.5

lldpXMedLocMediaPolicyUnknown

A value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' ind…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.6

lldpXMedLocMediaPolicyTagged

A value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN ope…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.7

lldpXMedRemCapabilitiesTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1 · 1 row entry · 4 columns

Open in standard view

A table that displays LLDP-MED capabilities of remote devices
connected to individual ports.

lldpXMedRemCapabilitiesEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1

LLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.

The remote tables in the LLDP-MED MIB excepting this table may be
sparsely populate. An entry in one of …

Indexes

lldpXMedRemCapTimeMark lldpXMedRemCapPortNum lldpXMedRemCapIndex

Column Syntax OID

lldpXMedRemCapTimeMark

A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

TimeFilter

Textual Convention: TimeFilter Unsigned32

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1.1

lldpXMedRemCapPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1.2

lldpXMedRemCapIndex

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1.3

lldpXMedRemCapSupported

The bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote
device connected to this port. Each bit in the bitmap corresponds
to an LLDP-MED subty…

LldpXMedCapabilities

Textual Convention: LldpXMedCapabilities Bits

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1.4

lldpXMedRemMediaPolicyTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2 · 1 row entry · 9 columns

Open in standard view

This table contains media policy information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the networkPolicy(0) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.

lldpXMedRemMediaPolicyEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1

Information about the per port per policy type policy
information for a particular physical network connection.

Indexes

lldpXMedRemMediaPolicyTimeMark lldpXMedRemMediaPolicyPortNum lldpXMedRemMediaPolicyIndex lldpXMedRemMediaPolicyAppType

Column Syntax OID

lldpXMedRemMediaPolicyTimeMark

A TimeFilter for this entry. See the TimeFilter textual
convention in IETF RFC 2021 and
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
to see how TimeFilter works.

TimeFilter

Textual Convention: TimeFilter Unsigned32

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.1

lldpXMedRemMediaPolicyPortNum

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.2

lldpXMedRemMediaPolicyIndex

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.3

lldpXMedRemMediaPolicyAppType

The media type that defines the primary function of the
application for the policy advertised by the endpoint connected
remotely to this port.

PolicyAppType

Textual Convention: PolicyAppType Bits

Type Values:

0	unknown
1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softPhoneVoice
6	videoconferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.4

lldpXMedRemMediaPolicyVlanID

An extension of the VLAN Identifier for the remote system
connected to this port, as defined in IEEE 802.1P-1998.

A value of 1 through 4094 is used to define a valid PVID.

A value of 0 shal…

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.5

lldpXMedRemMediaPolicyPriority

This object contains the value of the 802.1p priority
which is associated with the remote system connected at
given port.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.6

lldpXMedRemMediaPolicyDscp

This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with remote system connected at the port.

DIFFSERV-DSCP-TCDscp

Textual Convention: DIFFSERV-DSCP-TCDscp Integer32

Type Constraints:
range: 0..63

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.7

lldpXMedRemMediaPolicyUnknown

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.8

lldpXMedRemMediaPolicyTagged

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.9

lldpXMedRemInventoryTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3 · 1 row entry · 10 columns

Open in standard view

This table contains inventory information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the inventory(2) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set

lldpXMedRemInventoryEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1

Information about inventory information for the remote devices
connected to the ports.

Indexes

lldpXMedRemTimeMark lldpXMedRemPortNum lldpXMedRemIndex

Column	Syntax	OID
lldpXMedRemTimeMark A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.	TimeFilter Textual Convention: TimeFilter `Unsigned32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.1`
lldpXMedRemPortNum The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpLocPortTabl…	LldpPortNumber Textual Convention: LldpPortNumber `Integer32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.2`
lldpXMedRemIndex This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monot…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.3`
lldpXMedRemHardwareRev The vendor-specific hardware revision string as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.4`
lldpXMedRemFirmwareRev The vendor-specific firmware revision string as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.5`
lldpXMedRemSoftwareRev The vendor-specific software revision string as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.6`
lldpXMedRemSerialNum The vendor-specific serial number as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.7`
lldpXMedRemMfgName The vendor-specific manufacturer name as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.8`
lldpXMedRemModelName The vendor-specific model name as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.9`
lldpXMedRemAssetID The vendor-specific asset tracking identifier as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.10`

voiceVlanOuiTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.8.1.5 · 1 row entry · 4 columns

Open in standard view

This table contains the voice VLAN OUI configuration.

voiceVlanOuiEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.8.1.5.1

An entry indicates an OUI information, which is used to classify
voice traffic into the voice VLAN. If the source MAC addresses of
the received packet matches any of the OUI pattern, the received
packet is determined as…

Indexes

voiceVlanOuiAddr voiceVlanOuiMask

Column Syntax OID

voiceVlanOuiAddr

The MAC address of the OUI referring to this VoiceVlanOuiEntry.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.8.1.5.1.1

voiceVlanOuiMask

Indicates the OUI MAC address matching bitmask.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.8.1.5.1.2

voiceVlanOuiDes

The description of the OUI. A zero length string of this object indicates
there is no description for this OUI.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.4.8.1.5.1.3

voiceVlanOuiRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.8.1.5.1.4

voiceVlanInterfaceTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.8.2.1 · 1 row entry · 4 columns

Open in standard view

This table contains the interface-specific voice VLAN parameters.

voiceVlanInterfaceEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.8.2.1.1

An entry indicates the voice VLAN parameters for a port/port-channel.

Indexes

voiceVlanIfIndex

Column Syntax OID

voiceVlanIfIndex

Indicates the ifIndex of the physical port/port-channel interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.8.2.1.1.1

voiceVlanIfEnabled

Indicates whether the voice VLAN is enabled at the port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.8.2.1.1.2

voiceVlanIfMode

If auto learning is enabled, the port will be automatically learned
as voice VLAN member.
When the port is working in auto tagged mode, and the port captures
a voice device through the device's OUI, it will join the voi…

Enumerationr/w

Enumerated Values:

1	autoUntagged
2	autoTagged
3	manual

.1.3.6.1.4.1.171.10.139.2.1.4.8.2.1.1.3

voiceVlanIfState

This object indicates Voice vlan state to this Port.
manual - this port is a static member of voice vlan.
dynamic - this port is a dynamic member of voice vlan.
none - this port is not a member of voice vlan.

Enumeration

Enumerated Values:

1	manual
2	dynamic
3	none

.1.3.6.1.4.1.171.10.139.2.1.4.8.2.1.1.4

voiceVlanDeviceTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.1 · 1 row entry · 4 columns

Open in standard view

This table contains the information about the learned voice devices.

voiceVlanDeviceEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.8.3.1.1

Indicates the information of the connected voice device.

Indexes

voiceVlanDevicePortIfindex voiceVlanDeviceAddr

Column Syntax OID

voiceVlanDevicePortIfindex

Indicates the ifIndex of the port to which the voice device connects.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.1.1.1

voiceVlanDeviceAddr

Indicates the MAC address of the voice device.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.1.1.2

voiceVlanDeviceStartTime

Indicates the start time of the connected voice device.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.1.1.3

voiceVlanDeviceStatus

Indicates the status of the connected voice device.

Enumeration

Enumerated Values:

1	active
2	aging

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.1.1.4

voiceVlanLldpMedDeviceTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2 · 1 row entry · 8 columns

Open in standard view

This table contains the voice devices that are learned through LLDP-MED.

voiceVlanLldpMedDeviceEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1

An entry contains the information of a voice device learned through
LLDP-MED.

Indexes

voiceVlanLldpMedDeviceIndex

Column Syntax OID

voiceVlanLldpMedDeviceIndex

The local index used to identify the entry.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1.1

voiceVlanLldpMedDeviceLocalPort

This object indicates the local port number on which the voice
device is learned.

LldpPortNumber

Textual Convention: LldpPortNumber Integer32

Type Constraints:
range: 1..4096

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1.2

voiceVlanLldpMedDevChIdSubtype

The type of encoding used to identify the chassis associated with
the voice device.

LldpChassisIdSubtype

Textual Convention: LldpChassisIdSubtype Enumeration

Type Values:

1	chassisComponent
2	interfaceAlias
3	portComponent
4	macAddress
5	networkAddress
6	interfaceName
7	local

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1.3

voiceVlanLldpMedDevChassisId

The string value used to identify the chassis component associated
with the voice device.

LldpChassisId

Textual Convention: LldpChassisId OctetString

Type Constraints:
range: 1..255

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1.4

voiceVlanLldpMedDevPoIdSubtype

The type of port identifier encoding used to identify the port component
associated with the voice device.

LldpPortIdSubtype

Textual Convention: LldpPortIdSubtype Enumeration

Type Values:

1	interfaceAlias
2	portComponent
3	macAddress
4	networkAddress
5	interfaceName
6	agentCircuitId
7	local

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1.5

voiceVlanLldpMedDevicePortId

The string value used to identify the port component associated with
the voice device.

LldpPortId

Textual Convention: LldpPortId OctetString

Type Constraints:
range: 1..255

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1.6

voiceVlanLldpMedDevCreateTime

The creation time of the voice device.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1.7

voiceVlanLldpMedDevRemainTime

The Time-To-Live (in seconds) remaining for the voice device.
If the Remain Time decreases to 0, the voice device will be deleted.

secondsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.4.8.3.2.1.8

autoSurveillanceVlanOuiTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.9.1.5 · 1 row entry · 5 columns

Open in standard view

This table contains a list of the surveillance VLAN OUI configuration.

autoSurveillanceVlanOuiEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.9.1.5.1

An entry indicates an OUI information, which is used to classify
surveillance traffic into the surveillance VLAN. If the source MAC addresses of
the received packet matches any of the OUI pattern, the received
packet is…

Indexes

autoSurveillanceVlanOuiAddr autoSurveillanceVlanOuiMask

Column Syntax OID

autoSurveillanceVlanOuiAddr

The MAC address of the OUI referring to this entry.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.9.1.5.1.1

autoSurveillanceVlanOuiMask

Indicates the OUI MAC address matching bitmask.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.9.1.5.1.2

autoSurveillanceVlanOuiComponentType

The Component type of the OUI.
Note: The component type 'dlink' is not allowed to set.

OuiComponentTyper/w

Textual Convention: OuiComponentType Enumeration

Type Values:

0	vms
1	vmsClient
2	videoEncoder
3	networkStorage
4	dlink
5	other

.1.3.6.1.4.1.171.10.139.2.1.4.9.1.5.1.3

autoSurveillanceVlanOuiDescription

The description of the OUI. A zero length string of this object indicates
there is no description for this OUI.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.4.9.1.5.1.4

autoSurveillanceVlanOuiRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.9.1.5.1.5

autoSurveillanceVlanInterfaceTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.9.2.1 · 1 row entry · 2 columns

Open in standard view

This table contains the interface-specific surveillance VLAN parameters.

autoSurveillanceVlanInterfaceEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.9.2.1.1

An entry indicates the surveillance VLAN parameters for a port/port-channel.

Indexes

autoSurveillanceVlanIfIndex

Column Syntax OID

autoSurveillanceVlanIfIndex

Indicates the ifIndex of the physical port/port-channel interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.9.2.1.1.1

autoSurveillanceVlanIfEnabled

Indicates whether the surveillance VLAN is enabled at the port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.171.10.139.2.1.4.9.2.1.1.2

autoSurveillanceVlanDeviceTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.9.3.1 · 1 row entry · 6 columns

Open in standard view

This table contains the information about the learned surveillance devices.

autoSurveillanceVlanDeviceEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.9.3.1.1

Indicates the information of the connected surveillance device.

Indexes

autoSurveillanceVlanDevicePortIfIdx autoSurveillanceVlanDeviceAddr

Column Syntax OID

autoSurveillanceVlanDevicePortIfIdx

Indicates the ifIndex of the port to which the surveillance device connects.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.9.3.1.1.1

autoSurveillanceVlanDeviceAddr

Indicates the MAC address of the surveillance device.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.4.9.3.1.1.2

autoSurveillanceVlanDeviceCompType

The component type of the surveillance device.

OuiComponentType

Textual Convention: OuiComponentType Enumeration

Type Values:

0	vms
1	vmsClient
2	videoEncoder
3	networkStorage
4	dlink
5	other

.1.3.6.1.4.1.171.10.139.2.1.4.9.3.1.1.3

autoSurveillanceVlanDeviceDescr

The description of the surveillance device. A zero length string
of this object indicates there is no description for this OUI.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.4.9.3.1.1.4

autoSurveillanceVlanDeviceStartTime

Indicates the start time of the connected surveillance device.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.171.10.139.2.1.4.9.3.1.1.5

autoSurveillanceVlanDeviceStatus

Indicates the status of the connected surveillance device.

Enumeration

Enumerated Values:

1	active
2	aging

.1.3.6.1.4.1.171.10.139.2.1.4.9.3.1.1.6

erpsInstanceTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1 · 1 row entry · 23 columns

Open in standard view

The table of ERPS Instance.

erpsInstanceEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1

The list of snmp view tree entry.

Indexes

erpsInstanceId

Column Syntax OID

erpsInstanceId

Instance identifier of ERP instance.
This value must be between 1 and 32.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.1

erpsRingName

The ERP physical ring's name.
This name can be up to 32 characters long.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.2

erpsPort0

This object is used to specify the port interface that
will be the first ring port of the physical ring.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.3

erpsPort1

This object is used to specify the port interface that
will be the secont ring port of the physical ring.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.4

erpsInstDescription

Description to the ERP instance.
This description can be up to 64 characters long.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.5

erpsRapsVlan

This object is used to specify the R-APS channel VLAN's ID for
the ERP instance.
The APS channel VLAN of a sub-ring instance is also the virtual
channel of the sub-ring.
This value must be between 1 and 4094.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.6

erpsInclusionVlan

This object is used to specify the protected VLAN of the instance.

A range is identified when a hyphen (-) is used. For example VLANs
1 to 5 can be entered as 1-5. A list is identified when commas (,)
…

VlanListr/w

Textual Convention: VlanList OctetString

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.7

erpsInstMel

The ring MEL value of the ERP instance.
This value must be between 0 and 7. The configured MEL value of
all ring nodes that participate in the same ERP instance should
be identical.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.8

erpsInstProfileName

Erps profile name.
This name can be up to 32 characters long.Multiple ERP instances
can be associated with the same G.8032 profile.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.9

erpsRplPort

This object identifies the RPL port of the ring.
When a port is configured as a RPL port, that node becomes RPL
owner for that ring.

Value '0' indicates that none of the ring ports is a …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.10

erpsRplOwner

This object indicates whether this node is the RPL owner. Options to set
are Enabled and Disabled. When the object is Enabled, it's necessary to set
'erpsRplPort' object to further specify the RPL port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.11

erpsInstGuardTimer

This object reflects the Guard Timer value in the instance.
But it is configured in profile table and associated by profile name.

millisecondsUnsigned32

Constraints:
range: 10-2000

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.12

erpsInstHoldOffTimer

This object reflects the Hold Off Timer value in the instance.
But it is configured in profile table and associated by profile name.

millisecondsUnsigned32

Constraints:
range: 0-10000

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.13

erpsInstWTRTimer

This object reflects the WTR Timer value in the instance.
But it is configured in profile table and associated by profile name.

minutesUnsigned32

Constraints:
range: 1-12

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.14

erpsInstRevertive

This object reflects the revertive value in profile table associated with
the instance.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.15

erpsInstState

This object reflects current ring node status of ERP instance.

Enumeration

Enumerated Values:

1	deactivated
2	init
3	idle
4	protection

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.16

erpsInstAdminRpl

This object reflects current config ring node role of ERPS instance.

Enumeration

Enumerated Values:

1	owner
2	none

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.17

erpsInstOperaRpl

This object reflects running config ring node role of ERPS instance.

Enumeration

Enumerated Values:

1	owner
2	none

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.18

erpsInstPort0State

This object reflects the state for ring port0 of ERP instance.

Enumeration

Enumerated Values:

1	forwarding
2	blocked
3	signalFailBlocked
4	none

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.19

erpsInstPort1State

This object reflects the state for ring port1 of ERP instance.

Enumeration

Enumerated Values:

1	forwarding
2	blocked
3	signalFailBlocked
4	none

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.20

erpsInstAdminRplPort

This object reflects the current config RPL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.21

erpsInstOperaRplPort

This object reflects the current running RPL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.22

erpsInstRowStatus

Row status of the ring entry. Entries in this table can be modified
by setting the RowStatus as NOT_IN_SERVICE.

This RowStatus can be made active only if:
- fsErpsRingPort1 for this entry is set to valid …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.10.1.1.1.23

erpsProfileTable

table

.1.3.6.1.4.1.171.10.139.2.1.4.10.2.1 · 1 row entry · 7 columns

Open in standard view

A table to manage the G.8032 profile.

erpsProfileEntry entry .1.3.6.1.4.1.171.10.139.2.1.4.10.2.1.1

An entry appears in this table for each profile
in the system.

Indexes

erpsProfileId

Column Syntax OID

erpsProfileId

Erps profile id.
The profile id must be between 1 and 14.

Integer32

Constraints:
range: 1-14

.1.3.6.1.4.1.171.10.139.2.1.4.10.2.1.1.1

erpsProfileName

Erps profile name.
This name can be up to 32 characters long.Multiple ERP instances
can be associated with the same G.8032 profile.
By default, the profile name will be constructed by appending profile ID
to the string…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.4.10.2.1.1.2

erpsProfileRevertive

This object identifies whether the ring is operating in revertive or
nonRevertive manner.

In revertive mode of operation, once the failed link recovers, the data
path will be switched back from protecti…

Enumerationr/w

Enumerated Values:

1	enable
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.4.10.2.1.1.3

erpsProfileGuardTimer

This object is used to configure the period for the guard timer.
This timer is required to prevent reception of outdated R-APS
messages.

Guard timer will be started on reception of local clear SF event…

millisecondsUnsigned32r/w

Constraints:
range: 10-2000

.1.3.6.1.4.1.171.10.139.2.1.4.10.2.1.1.4

erpsProfileHoldOffTimer

This object is used to configure the period for the hold-off timer.

Hold-Off timer will be started when a new defect (SF) is received for
this ring. This defect will not be given as local SF to ERP c…

millisecondsUnsigned32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.171.10.139.2.1.4.10.2.1.1.5

erpsProfileWTRTimer

This object is used to configure the period for the Wait to restore
timer.

This object is applicable, only if this ring is operating in the
revertive mode of operation.

In the revertive mo…

minutesUnsigned32r/w

Constraints:
range: 1-12

.1.3.6.1.4.1.171.10.139.2.1.4.10.2.1.1.6

erpsProfileRowStatus

Row status of the profile entry.

Only 'CreateAndWait' and 'destroy' values are allowed for this object.

The profile entry can be applied to an instance only when the profile row status
be…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.4.10.2.1.1.7

arpAgingTimeTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.1.1.1 · 1 row entry · 2 columns

Open in standard view

The table of ARP Aging Time.

arpAgingTimeEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.1.1.1.1

The list of snmp view tree entry.

Indexes

arpAgingTimeIntrefaceID

Column	Syntax	OID
arpAgingTimeIntrefaceID A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.171.10.139.2.1.5.1.1.1.1.1`
arpAgingTimeTimeout ARP Aging Time Timeout (min).	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.171.10.139.2.1.5.1.1.1.1.2`

arpTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.1.2.1 · 1 row entry · 5 columns

Open in standard view

A table to control ARP Spoofing prevention for the entire
switch or for each interface in the switch.

arpEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1

An entry appears in this table for each interface
in the system.

Indexes

arpIntrefaceID arpIpAddr

Column Syntax OID

arpIntrefaceID

Proxy ARP VLAN Interface.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.1

arpIpAddr

Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.2

arpMacAddress

Ethernet Mac Address.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.3

arpType

ARP Table Type.

Enumerationr/w

Enumerated Values:

1	other
2	invalid
3	dynamic
4	static

.1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.4

arpRowStatus

ARP Table RowStatus.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.5

multiIfMainTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.1 · 1 row entry · 6 columns

Open in standard view

A list of all the interface entries in the system. 
This table contains objects which are applicable to all
types of interfaces in the system. This table is a 
proprietary extension to the standard ifTable and 
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex.

multiIfMainEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.1.1

An entry containing management information applicable
to a particular interface.

Indexes

multiIfMainIndex

Column Syntax OID

multiIfMainIndex

A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.1

multiIfMainAdminStatus

The desired state of the interface. This object
can be set only when the ifMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.

When a mana…

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.2

multiIfMainOperStatus

The current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.

If ifMainAdminStatus is down (2)
then if…

Enumeration

Enumerated Values:

1	up
2	down
3	testing
4	unknown
5	dormant
6	notPresent
7	lowerLayerDown

.1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.3

multiIfIpBindVlanId

the IP Interface over the Vlan Interface which it vlan id is the configure Vlan id.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.4

multiL3VlanIfName

the L3 Vlan Interface Name.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.5

multiIfMainRowStatus

A RowStatus variable for addition, deletion and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.

When the status is active, the interface is created and
ready …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.6

multiIfIpTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.2 · 1 row entry · 4 columns

Open in standard view

A list of all the interface entries in the system which
are registered with IP.
                
This table contains objects which are applicable for the
management of IP over the network interfaces
in the system. 
             
This table is a extension to the ifMainTable. 
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
                
Entries are created automatically in this table for
any interface sub-layer which is layer below IP using
the ifStackTable. Similarly, entries are deleted from
this table when the interface's layering below IP is
removed.

multiIfIpEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.2.1

An entry containing management information applicable
to a particular interface over which IP is operating.

Indexes

multiIfIpIndex

Column Syntax OID

multiIfIpIndex

A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.2.1.1

multiIfIpAddrAllocMethod

The mechanism to be used for allocation of IP
address for this interface.

If the method specified is manual and the IP
address is not provided (then the interface
would be treated as a un-numbered in…

Enumerationr/w

Enumerated Values:

1	manual
2	dynamic

.1.3.6.1.4.1.171.10.139.2.1.5.3.2.1.2

multiIfIpAddr

Specifies the IP address given to this
interface. The specification of this object is
mandatory for all network interfaces (Ethernet,
FR VC, IPoA interface, PPP link - not under MP,
MP interface and X.25 VC). If the int…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.3.2.1.3

multiIfIpSubnetMask

Specifies the IP Subnet Mask for this
interface. The value should be specified only
for network interfaces and any valid VLSM is
accepted.

If not specified, this object takes the default
subnet mask valu…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.3.2.1.4

multiRouteConfigTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.3 · 1 row entry · 6 columns

Open in standard view

This entity's IP Routing table. This table can be used to 
view all user configuration routes present in the system

multiRouteConfigEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.3.1

A particular route to a particular destina-
tion, under a particular policy.

Indexes

multiRouteConfigDest multiRouteConfigMask multiRouteConfigNextHop

Column Syntax OID

multiRouteConfigDest

The destination IP address of this route.

This object may not take a Multicast (Class D)
address value.

Any assignment (implicit or otherwise) of an
instance of this object to a valu…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.1

multiRouteConfigMask

Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the RouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent construct…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.2

multiRouteConfigNextHop

On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.3

multiRouteConfigIfIndex

The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.
0 indicate invalid interface

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.4

multiRouteConfigStatus

The row status variable, used according to
row installation and removal conventions.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.5

multiRouteConfigBackupState

The Backup route support only for static route.
The object indicates whether the static route as
primary route or backup route.

Enumerationr/w

Enumerated Values:

0	unassigned
1	primary
2	backup

.1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.6

multiRouteTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.4 · 1 row entry · 7 columns

Open in standard view

This entity's IP Routing table. This table can be used to 
view all active routes present in the system

multiRouteEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.4.1

A particular route to a particular destina-
tion, under a particular policy.

Indexes

multiRouteDest multiRouteMask multiRouteNextHop

Column Syntax OID

multiRouteDest

The destination IP address of this route.

This object may not take a Multicast (Class D)
address value.

Any assignment (implicit or otherwise) of an
instance of this object to a valu…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.1

multiRouteMask

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.2

multiRouteNextHop

On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.3

multiRouteIfIndex

The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.
0 indicate invalid interface

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.4

multiRouteProto

The routing mechanism via which this route was
learned. Inclusion of values for gateway rout-
ing protocols is not intended to imply that
hosts should support those protocols.

Enumeration

Enumerated Values:

1	other
2	local
3	netmgmt
4	icmp
5	egp
6	ggp
7	hello
8	rip
9	isIs
10	esIs
11	ciscoIgrp
12	bbnSpfIgp
13	ospf
14	bgp
15	idpr
16	ciscoEigrp

.1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.5

multiRouteMetric

The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
multiRouteProto value.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.6

multiRoutePreference

The preference for the method by which this route was learned.
This value will be used by the forwarding algorithm to choose
the best route..

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.7

multiIpv6IfTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.5 · 1 row entry · 4 columns

Open in standard view

The IPv6 Interface table contains information on the 
entity's internetwork-layer interfaces on which IPv6.
protocol is enabled. An IPv6 interface constitutes a logical 
network layer attachment to the layer immediately below
IPv6. These include LAN interfaces, Point-to-Point interfaces, 
NBMA interfaces and IPv6 over IPv4 Tunnel interfaces.

multiIpv6IfEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.5.1

An interface entry containing objects about a particular
IPv6 interface. The entry is created or deleted from SNMP.

Indexes

multiIpv6IfIndex

Column Syntax OID

multiIpv6IfIndex

A unique value identifying the particular IPv6
interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.1

multiIpv6IfAdminStatus

Indicates whether IPv6 is enabled/disabled on this interface.
When lower layer indicates the creation of the interface, an
entry will be create in IPv6 interfac table with
fsipv6IfAdminStatus in down(2) state. Either on…

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.2

multiIpv6IfOperStatus

The operational state of interface. It is up(1) if the
fsipv6IfAdminStatus is 'up' and the layer below the network
layer is also operational. Otherwise it is down(2).

Enumeration

Enumerated Values:

1	up
2	down
3	stale

.1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.3

multiIpv6IfRetransmitTime

The retransmit time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds between
retransmitted Neighbor Solicitations and is used duri…

Integer32r/w

Constraints:
range: 1-3600

.1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.4

multiIpv6AddrTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.6 · 1 row entry · 7 columns

Open in standard view

The table containing entity's IPv6 addressing information.

multiIpv6AddrEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.6.1

The entry in the IPv6 Address Table which defines a
unicast, anycast or link-local address on an IPv6 interface.

Indexes

multiIpv6AddrIndex multiIpv6AddrAddress multiIpv6AddrPrefixLen

Column Syntax OID

multiIpv6AddrIndex

The index value which uniquely identifies the IPv6
interface on which this IPv6 address entry exists.
The interface identified by a particular value of this
index is the same interface as identified by the same
value …

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.1

multiIpv6AddrAddress

The IPv6 address to which this entry's addressing
information pertains.

Ipv6Address

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.2

multiIpv6AddrPrefixLen

The length of the prefix (in bits) associated with
the IPv6 address of this entry. For a link-local address,
the prefix is always start with '0xfe80' and the prefix
length is 128 bits.

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.3

multiIpv6AddrAdminStatus

Indicates the desired status of the address. Also a creation
of an address can trigger IPv6 to be enabled over the
interface. Similarly deletion of all the address may trigger
IPv6 to be disabled on the interface. NotIn…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.4

multiIpv6AddrType

Indicates whether the address is a unicast, anycast or
link-local address. Syntactically there is no difference
between a unicast address and a anycast address while a
link-local address has the prefix '0xfe80'. This
ob…

Enumerationr/w

Enumerated Values:

1	unicast
2	anycast
3	linklocal

.1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.5

multiIpv6AddrCfgMethod

Indicates the configuration method of the address.
static(1) indicates that this address is configured by user;
stateless(2) indicates that this address is auto configured stateless;
stateful(3) indicates that this addr…

Enumeration

Enumerated Values:

1	static
2	stateless
3	stateful
4	dynamic

.1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.6

multiIpv6AddrOperStatus

Indicates the operational status of the address. A
status of failed(4) indicates that a duplicate address has
been detected on this IPv6 interface. On interfaces on
which Duplicate Address Detection is not performed, th…

Enumeration

Enumerated Values:

1	tentative
2	complete
3	down
4	failed

.1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.7

multiIPv6neighborTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.7 · 1 row entry · 6 columns

Open in standard view

A list of the Neighbor Cache Table.

multiIpv6NeighborEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.7.1

A Neighbor cache entry containing the ifindex and ipv6 addr.

Indexes

multiIpv6NeighborIndex multiIpv6NeighborAddr

Column Syntax OID

multiIpv6NeighborIndex

The interface index of the Neighbor entry.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.1

multiIpv6NeighborAddr

Allows the entry of an IP address that will be a Neighbor entry into
the Neighbor Cache Table.

Ipv6Address

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.2

multiIpv6NeighborMacAddr

The MAC address associated of the Neighbor entry.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.3

multiIpv6NeighborType

The type associated of the Neighbor entry.

Enumeration

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.4

multiIpv6NeighborCacheState

The type associated of the Neighbor entry.

Enumeration

Enumerated Values:

1	static
2	reachable
3	incomplete
4	stale
5	delay
6	probe
7	notinservice

.1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.5

multiIpv6NeighborRowStatus

The status of an entry in the Neighbor Cache Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.6

multiIpv6StaticRouteTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.8 · 1 row entry · 8 columns

Open in standard view

This table contains dynamic routes that are learnt
through dynamic routing protocol as well as local routes
derived from configured address prefixes and statically
configured routes.

multiIpv6StaticRouteEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.8.1

An entry in the IPv6 Static Routing Table. An entry can be created
by means of the routing protocol, derived from configured
address prefixes as well as statically configured.

Indexes

multiIpv6StaticRouteDest multiIpv6StaticRoutePfxLength multiIpv6StaticRouteNextHop

Column Syntax OID

multiIpv6StaticRouteDest

The destination IPv6 address of this route.
This object will not take a Link-Local or Multicast address
value.

Ipv6Address

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.1

multiIpv6StaticRoutePfxLength

Indicates the prefix length of the destination
address.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.2

multiIpv6StaticRouteNextHop

Next hop IPv6 Address for this route. For direct routes
it has the value ::0.

Ipv6Address

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.3

multiIpv6StaticRouteIfIndex

The index value which uniquely identifies the interface
through which the next hop of this route should be reached.
The interface identified by a particular value of this index
is the same interface as identified by the…

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.4

multiIpv6StaticRouteAdminStatus

Administrative Status of the route. This object is used
to create or delete the route entry. The ipv6RouteIfIndex
and backup state needs to be set, before the route entry
is made active. CreateAndGo is not supported.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.5

multiIpv6StaticRouteBackupState

The Backup route support only for static route.
The object indicates whether the static route as
primary route or backup route

Enumerationr/w

Enumerated Values:

0	unassigned
1	primary
2	backup

.1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.6

multiIpv6StaticRouteSelected

Indicates the primary or backup route which is selected.

Enumeration

Enumerated Values:

1	selected
2	unselected

.1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.7

multiIpv6StaticRouteValidState

Indicates route is alive whether or not.

Enumeration

Enumerated Values:

0	invalid
1	valid

.1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.8

multiIpv6RouteTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.9 · 1 row entry · 7 columns

Open in standard view

This table contains dynamic routes that are learnt
through dynamic routing protocol as well as local routes
derived from configured address prefixes and statically
configured routes.

multiIpv6RouteEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.9.1

An entry in the IPv6 Routing Table. An entry can be created
by means of the routing protocol, derived from configured
address prefixes as well as statically configured. There
can be a static route as well as dynamic rou…

Indexes

multiIpv6RouteDest multiIpv6RoutePfxLength multiIpv6RouteProtocol multiIpv6RouteNextHop

Column Syntax OID

multiIpv6RouteDest

The destination IPv6 address of this route.
This object will not take a Link-Local or Multicast address
value.

Ipv6Address

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.1

multiIpv6RoutePfxLength

Indicates the prefix length of the destination
address.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.2

multiIpv6RouteProtocol

The routing mechanism via which this route was
learned.

Enumeration

Enumerated Values:

1	other
2	local
3	netmgmt
4	ndisc

.1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.3

multiIpv6RouteNextHop

Next hop IPv6 Address for this route. For direct routes
it has the value ::0.

Ipv6Address

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.4

multiIpv6RouteIfIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.5

multiIpv6RouteMetric

The routing metric associated with this route

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.6

multiIpv6RoutePreference

The preference for the method by which this route was learned.
This value will be used by the forwarding algorithm to choose
the best route..

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.7

dhcpClientTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.10 · 1 row entry · 8 columns

Open in standard view

The dhcp options which are to be added to packets sent
will be added as entries in this table.   
          
While sending out discover message, the options entries
which are avilable in this table will be added with
discover message.

dhcpClientEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.10.1

An entry containing dhcp options which will be added to the
packets from client to server.

Indexes

dhcpClientIfIndex

Column Syntax OID

dhcpClientIfIndex

A unique identifier for each interface.
This object is identical to the ifIndex
of the standard MIB-2 ifTable.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.10.1.1

dhcpClientClientIdIfIdx

This object indicates ifIndex of the VLAN interface whose
hexadecimal MAC address will be used as the client ID to be
sent with the DISCOVER message
0 indicates that preferred client id is unspecified

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.10.1.2

dhcpClientClassIdType

The object indicates the type of class id which is defined by
dhcpClientClassIdValue.
The value means :
ascii(1)- The dhcpClientClassIdValue is ascii string.
hex(2) - The dhcpClientClassIdValue is a string …

Enumerationr/w

Enumerated Values:

1	ascii
2	hex

.1.3.6.1.4.1.171.10.139.2.1.5.3.10.1.3

dhcpClientClassId

This object indicates the value of vendor class identifier
(option 60) to be sent with the DHCP DISCOVER message.

An dhcpClientClassIdValue value is always interpreted
within the context of an dhcpClient…

OctetStringr/w

.1.3.6.1.4.1.171.10.139.2.1.5.3.10.1.4

dhcpClientHostName

This object indicates the host name. The host name must start with
a letter, end with a letter or digit, and only with interior
characters letters, digits, and hyphens.
length is equal to 0 indicates that preferred ho…

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.171.10.139.2.1.5.3.10.1.5

dhcpClientLeaseDay

This object indicates the number of days for the duration of
preferred lease time. Value of -1 indicates that preferred lease
time is unspecified.
This value is checked when an IP address is acquired from
a DHCP serve…

Integer32r/w

Constraints:
range: -1-10000

.1.3.6.1.4.1.171.10.139.2.1.5.3.10.1.6

dhcpClientLeaseHour

This object indicates the number of hours for the duration of preferred
lease time.

Unsigned32r/w

Constraints:
range: 0-23

.1.3.6.1.4.1.171.10.139.2.1.5.3.10.1.7

dhcpClientLeaseMinute

This object indicates the number of minutes for the duration of preferred
lease time.

Unsigned32r/w

Constraints:
range: 0-59

.1.3.6.1.4.1.171.10.139.2.1.5.3.10.1.8

dhcp6ClientTable

table

.1.3.6.1.4.1.171.10.139.2.1.5.3.11 · 1 row entry · 3 columns

Open in standard view

A table contains all DHCPv6 client entries which consists of
DHCPv6 client related configuration. An entry is created to set a
value different from the default on an interface.

dhcp6ClientEntry entry .1.3.6.1.4.1.171.10.139.2.1.5.3.11.1

Defines an entry in the dhcp6ClientTable.

Indexes

dhcp6ClientIndex

Column Syntax OID

dhcp6ClientIndex

The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.171.10.139.2.1.5.3.11.1.1

dhcp6ClientEnabled

This object indicates whether acquires an IPv6 address on an
interface from the DHCPv6 server.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.5.3.11.1.2

dhcp6ClientRapidCommit

This object indicates whether the two-message
exchange for address allocation and other configuration is used.
When dhcp6ClientEnabled is 'false', dhcp6ClientRapidCommit
cannot be set to 'true'.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.5.3.11.1.3

qosPortDefaultCoSTable

table

.1.3.6.1.4.1.171.10.139.2.1.6.1.1.1 · 1 row entry · 4 columns

Open in standard view

This table of Port Default CoS.

qosPortDefaultCoSEntry entry .1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1

An entry configures the Port Default CoS.

Indexes

qosPortindex

Column Syntax OID

qosPortindex

Interface index of the port for which the configuration
in this entry applies.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1.1

qosPortDefMode

This object indicates the mechanism of QoS scheduling on the interface.

Enumerationr/w

Enumerated Values:

1	defaultCoS
2	none

.1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1.2

qosPortDefCos

Port Default CoS. Indicates the Default CoS.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1.3

qosPortDefOverride

Port Default CoS. Override

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1.4

qosPortSchedulerMethodTable

table

.1.3.6.1.4.1.171.10.139.2.1.6.1.2.1 · 1 row entry · 2 columns

Open in standard view

This table consists of a list of scheduling mechanism configurations
for ports.

qosPortSchedulerMethodEntry entry .1.3.6.1.4.1.171.10.139.2.1.6.1.2.1.1

An entry configures the scheduling mode on an interface.

Indexes

qosSchedulingModeBasePort

Column Syntax OID

qosSchedulingModeBasePort

Interface index of the port for which the configuration
in this entry applies.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.6.1.2.1.1.1

qosSchedulingMode

This object indicates the mechanism of QoS scheduling on the interface.

Enumerationr/w

Enumerated Values:

1	sp
2	rr
3	wrr
4	wdrr

.1.3.6.1.4.1.171.10.139.2.1.6.1.2.1.1.2

qosQueueSettingsTable

table

.1.3.6.1.4.1.171.10.139.2.1.6.1.3.1 · 1 row entry · 4 columns

Open in standard view

This table consists of a list of configurations for WRR queue bandwidth
of queues.

qosQueueSettingsEntry entry .1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1

An entry defines WRR weight of a queue on an interface.
An entry exists for each queue if the WRR bandwidth is configurable
on the queue.

Indexes

qosQueueBasePort qosQueueID

Column	Syntax	OID
qosQueueBasePort Interface index of the port for which the configuration in this entry applies.	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1.1`
qosQueueID This object indicates the queue ID of the entry.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1.2`
qosQueueWrrWeight This object indicates the WRR Weight.	Integer32r/w Constraints: `range: 0-127`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1.3`
qosQueueQuantum This object indicates the WDRR Quantum.	Integer32r/w Constraints: `range: 0-127`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1.4`

qosCoS2QueueTable

table

.1.3.6.1.4.1.171.10.139.2.1.6.1.4.1 · 1 row entry · 2 columns

Open in standard view

The table of CoS to Queue Mapping.

qosCoS2QueueEntry entry .1.3.6.1.4.1.171.10.139.2.1.6.1.4.1.1

The list of CoS to Queue Mapping entry.

Indexes

qosCoS2QueCos

Column	Syntax	OID
qosCoS2QueCos CoS to Queue Mapping. CoS.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.4.1.1.1`
qosCos2QueQueueID CoS to Queue Mapping. Queue ID.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.4.1.1.2`

qosPortRateLimitingTable

table

.1.3.6.1.4.1.171.10.139.2.1.6.1.5.1 · 1 row entry · 7 columns

Open in standard view

This table consists of Port Rate Limiting.

qosPortRateLimitingEntry entry .1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1

An entry configures the Port Rate Limiting.

Indexes

qosBandwidthBasePort

Column Syntax OID

qosBandwidthBasePort

Interface index of the port for which the configuration
in this entry applies.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.1

qosBandwidthRxRate

Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).

This object's value will take effect on the interface speed. Based
on the operating speed of the port, th…

Integer32r/w

Constraints:
range: 0-10000000

.1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.2

qosBandwidthRxRateMode

Indicates the Minimum Rate Mode.
It will indicate the field:qosBandwidthRxRate attribute.
rate: means the Minimum Rate.
percent: means the percentage.

Enumerationr/w

Enumerated Values:

1	rate
2	percent

.1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.3

qosBandwidthRxBurst

Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)

This object's value will take effect on the interface speed. Based
on the operating speed of th…

Integer32r/w

Constraints:
range: 0-128000

.1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.4

qosBandwidthTxRate

Integer32r/w

Constraints:
range: 0-10000000

.1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.5

qosBandwidthTxRateMode

Indicates the Minimum Rate Mode.
It will indicate the field:qosBandwidthTxRate attribute.
rate: means the Minimum Rate.
percent: means the percentage.

Enumerationr/w

Enumerated Values:

1	rate
2	percent

.1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.6

qosBandwidthTxBurst

Integer32r/w

Constraints:
range: 0-128000

.1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.7

qosQueueRateLimitingTable

table

.1.3.6.1.4.1.171.10.139.2.1.6.1.6.1 · 1 row entry · 5 columns

Open in standard view

A table contains information about Queue Rate Limiting.

qosQueueRateLimitingEntry entry .1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1

An entry contains bandwidth control information of Queue Rate Limiting.

Indexes

qosQueueBandwidthBasePort qosQueueBandwidthQueId

Column Syntax OID

qosQueueBandwidthBasePort

Interface index of the port for which the configuration
in this entry applies.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.1

qosQueueBandwidthQueId

Indicates the queue ID of the entry.

Unsigned32

Constraints:
range: 0-127

.1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.2

qosQueueBandwidthMinRate

Indicates the minimum rate of the specified port and queue.
It is based on the dQosQueueBandwidthMinRateMode field and
if the dQosQueueBandwidthMinRateMode selected as:
rate: means egress Minimum Rate (units:kbps),rang…

Integer32r/w

Constraints:
range: 0-10000000

.1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.3

qosQueueBandwidthMaxRate

Indicates the maximum rate of the specified port and queue.
It is based on the dQosQueueBandwidthMaxRateMode field and
if the dQosQueueBandwidthMaxRateMode selected as:
rate: means egress Maximum Rate (units:kbps),rang…

Integer32r/w

Constraints:
range: 0-10000000

.1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.4

qosQueueBandwidthRateMode

Indicates the Minimum Rate Mode.
It will indicate the field:dQosQueueBandwidthMinRate attribute.
rate: means the Minimum Rate.
percent: means the percentage.

Enumerationr/w

Enumerated Values:

1	rate
2	percent

.1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.5

qosDscpMapCosTable

table

.1.3.6.1.4.1.171.10.139.2.1.6.1.7.1 · 1 row entry · 2 columns

Open in standard view

This table of Port Default CoS.

qosDscpMapCosEntry entry .1.3.6.1.4.1.171.10.139.2.1.6.1.7.1.1

An entry configures the Port Default CoS.

Indexes

qosPortIndex

Column Syntax OID

qosPortIndex

Interface index of the port for which the configuration
in this entry applies.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.6.1.7.1.1.1

qosTrustMode

The QoS port trust mode.

Enumerationr/w

Enumerated Values:

0	cos
1	dscp

.1.3.6.1.4.1.171.10.139.2.1.6.1.7.1.1.2

qosDscpValueMapCosTable

table

.1.3.6.1.4.1.171.10.139.2.1.6.1.7.2 · 1 row entry · 3 columns

Open in standard view

This table of Port Default CoS.

qosDscpValueMapCosEntry entry .1.3.6.1.4.1.171.10.139.2.1.6.1.7.2.1

An entry configures the Port Default CoS.

Indexes

qosDscpPort qosDscpCos

Column	Syntax	OID
qosDscpPort The DSCP port index.	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.7.2.1.1`
qosDscpCos The CoS value.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.7.2.1.2`
qosDscpMapCosList The DSCP value list mapping to CoS.	PortListr/w Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.6.1.7.2.1.3`

aclProfileTable

table

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1 · 1 row entry · 10 columns

Open in standard view

A table to ACL profile .

aclProfileEntry entry .1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1

Each entry in this table is a ACL profile.
Index to the table is ACL profile ID.

Indexes

aclProfileNo

Column Syntax OID

aclProfileNo

The ACL Profile ID. The ID 1 to 50 is user-defined ACL,
and the ID more than 50 is reserved for system-defined ACL.
The user only allow to create user-defined ACL ID.
And system-defined ACL is read only.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.1

aclProfileName

An administratively assigned string, which may be used
to identify the Profile.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.2

aclProfileType

The ACL Profile type, possible value are
l2 (1) - for MAC-based rule,
l3v4 (2) - for IPv4-based rule,
l3v4Ext (3) - for IPv4-Ext rule,
l3v6 (4) - for IPv6-based rule.
Note that only l2, l3 and l3v6 could be s…

Enumerationr/w

Enumerated Values:

1	l2
2	l3v4
3	l3v4Ext
4	l3v6
5	l3v6Ext
6	expert

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.3

aclProfileRuleCount

The number of rules in this profile.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.4

aclProfileRemark

acl group description which is long and more detailed.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.5

aclProfileRuleIdStart

the start rule id in this acl group.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.6

aclProfileRuleIdStep

the step of the rule id in this acl group.

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.7

aclProfileRuleCounterState

the state of hw counter for this acl group.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.8

aclProfileRuleCounterClear

Clear rule hw counter for this acl group.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.9

aclProfileStatus

This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of a…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.10

aclL2RuleTable

table

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1 · 1 row entry · 14 columns

Open in standard view

A table to configure L2 filter rules in the system.

aclL2RuleEntry entry .1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1

Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID.

Indexes

aclL2ProfileID aclL2AccessID

Column Syntax OID

aclL2ProfileID

ACL Profile ID which this rule join.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.1

aclL2AccessID

L2 Filter rule ID.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.2

aclL2RuleEtherType

The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '0', which means the rule don't care this
condition.
The aclL2EtherFrameType should be specifie…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.3

aclL2RuleDstMacAddr

Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.4

aclL2RuleSrcMacAddr

Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.5

aclL2RuleVlanId

Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition.

Integer32r/w

Constraints:
range: -1-4094

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.6

aclL2Rule1pPriority

802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition.

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.7

aclL2RuleDstMacAddrMask

The MAC address Mask work for Destination MAC address.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.8

aclL2RuleSrcMacAddrMask

The MAC address Mask work for Source MAC address.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.9

aclL2RuleTimeRange

An administratively assigned string, which may be used
to identify the Profile.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.10

aclL2RuleAction

Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded.

Enumerationr/w

Enumerated Values:

1	allow
2	drop

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.11

aclL2RuleEtherTypeMask

The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition.
The aclL2EtherFrameType should be specifi…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.12

aclL2RuleMatchCount

Number of times this filter is matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.13

aclL2RuleStatus

This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.14

aclL3v4RuleTable

table

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1 · 1 row entry · 10 columns

Open in standard view

A table to configure L3 filter rules in the system.

aclL3v4RuleEntry entry .1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1

Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number.

Indexes

aclL3v4RuleProfileNo aclL3v4RuleAccessID

Column Syntax OID

aclL3v4RuleProfileNo

The Profile ID which this rule join.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.1

aclL3v4RuleAccessID

L3 Filter rule ID.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.2

aclL3v4RuleDstIpAddr

Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.3

aclL3v4RuleSrcIpAddr

Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.4

aclL3v4RuleDstIpAddrMask

The IP subnet mask for Destination IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.5

aclL3v4RuleSrcIpAddrMask

The IP subnet mask for Source IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.6

aclL3v4RuleAction

Specifies the action to be taken on the packet if the filter
rule matches.

Enumerationr/w

Enumerated Values:

1	allow
2	drop

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.7

aclL3v4RuleTimeRange

An administratively assigned string, which may be used
to identify the Profile.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.8

aclL3v4RuleMatchCount

Number of times this filter is matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.9

aclL3v4RuleStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.10

aclL3v4ExtRuleTable

table

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1 · 1 row entry · 31 columns

Open in standard view

A table to configure L3 filter rules in the system.

aclL3v4ExtRuleEntry entry .1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1

Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number.

Indexes

aclL3v4ExtRuleProfileNo aclL3v4ExtRuleAccessID

Column Syntax OID

aclL3v4ExtRuleProfileNo

The Profile ID which this rule join.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.1

aclL3v4ExtRuleAccessID

L3 Filter rule ID.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.2

aclL3v4ExtRuleProtocol

The type of protocol to be checked against the packet.

Enumerationr/w

Enumerated Values:

0	none
1	icmp
2	igmp
6	tcp
17	udp
47	gre
50	esp
88	eigrp
89	ospf
94	ipinip
103	pim
108	pcp
112	vrrp

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.3

aclL3v4ExtRuleFragments

Enumerationr/w

Enumerated Values:

0	none
1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.4

aclL3v4ExtRuleICMPMessageType

The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means…

Integer32r/w

Constraints:
range: -1-255

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.5

aclL3v4ExtRuleICMPMessageCode

The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which mean…

Integer32r/w

Constraints:
range: -1-255

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.6

aclL3v4ExtRuleDstIpAddr

Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.7

aclL3v4ExtRuleSrcIpAddr

Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.8

aclL3v4ExtRuleDstIpAddrMask

The IP subnet mask for Destination IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.9

aclL3v4ExtRuleSrcIpAddrMask

The IP subnet mask for Source IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.10

aclL3v4ExtRuleTcpUdpDstOperator

The type of UDP/TCP port operator indicates how a packet's
TCP/UDP source or destination port number is compared.
none(1) - No comparison.
eq (2)- equal
gt (3)- greater than.
lt (4)- less than.
neq(5)- not equal …

Enumerationr/w

Enumerated Values:

1	none
2	eq
3	gt
4	lt
5	neq
6	range

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.11

aclL3v4ExtRuleTcpUdpDstPort

The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.

Integer32r/w

Constraints:
range: -1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.12

aclL3v4ExtRuleTcpUdpMinDstPort

The minimum port in the destination port range.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.13

aclL3v4ExtRuleTcpUdpMaxDstPort

The maximum port in the destination port range.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.14

aclL3v4ExtRuleTcpUdpSrcOperator

Enumerationr/w

Enumerated Values:

1	none
2	eq
3	gt
4	lt
5	neq
6	range

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.15

aclL3v4ExtRuleTcpUdpSrcPort

The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.

Integer32r/w

Constraints:
range: -1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.16

aclL3v4ExtRuleTcpUdpMinSrcPort

The minimum port in the source port range.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.17

aclL3v4ExtRuleTcpUdpMaxSrcPort

The maximum port in the source port range.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.18

aclL3v4ExtRuleIPPrecedence

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.19

aclL3v4ExtRuleDscp

The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The aclL3RuleTos should be specified as dscp.

Integer32r/w

Constraints:
range: -1-63

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.20

aclL3v4ExtRuleToS

The ToS value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The cmAclL3RuleTos should be specified as dscp.

Integer32r/w

Constraints:
range: -1-15

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.21

aclL3v4ExtRuleTcpAckBit

The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.22

aclL3v4ExtRuleTcpRstBit

The TCP RST bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.23

aclL3v4ExtRuleTcpUrgBit

The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.24

aclL3v4ExtRuleTcpPshBit

The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.25

aclL3v4ExtRuleTcpSynBit

The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.26

aclL3v4ExtRuleTcpFinBit

The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.27

aclL3v4ExtRuleAction

Specifies the action to be taken on the packet if the filter
rule matches.

Enumerationr/w

Enumerated Values:

1	allow
2	drop

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.28

aclL3v4ExtRuleTimeRange

An administratively assigned string, which may be used
to identify the Profile.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.29

aclL3v4ExtRuleMatchCount

Number of times this filter is matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.30

aclL3v4ExtRuleStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.31

aclL3v6RuleTable

table

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1 · 1 row entry · 10 columns

Open in standard view

A table to configure L3 ipv6 filter rules in the system.

aclL3v6RuleEntry entry .1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1

Each entry in this table is a L3 ipv6 filter rule.
Index to the table is L3 ipv6 filter number.

Indexes

aclL3v6RuleProfileNo aclL3v6RuleAccessID

Column Syntax OID

aclL3v6RuleProfileNo

The Profile ID which this rule join.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.1

aclL3v6RuleAccessID

L3 Filter rule ID.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.2

aclL3v6RuleDstIpv6Addr

Destination IPv6 address to be matched with the packet.

Ipv6Addressr/w

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.3

aclL3v6RuleSrcIpv6Addr

Source IPv6 address to be matched with the packet.

Ipv6Addressr/w

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.4

aclL3v6RuleDstIpv6AddrPrefixLen

The prefix length for Destination IPv6 address.

InetAddressPrefixLengthr/w

Textual Convention: InetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.5

aclL3v6RuleSrcIpv6AddrPrefixLen

The prefix length for Source IPv6 address.

InetAddressPrefixLengthr/w

Textual Convention: InetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.6

aclL3v6RuleAction

Specifies the action to be taken on the packet if the filter
rule matches.

Enumerationr/w

Enumerated Values:

1	allow
2	drop

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.7

aclL3v6RuleTimeRange

An administratively assigned string, which may be used
to identify the Profile.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.8

aclL3v6RuleMatchCount

Number of times this filter is matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.9

aclL3v6RuleStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.10

aclL3v6ExtRuleTable

table

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1 · 1 row entry · 30 columns

Open in standard view

A table to configure L3 ipv6 filter rules in the system.

aclL3v6ExtRuleEntry entry .1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1

Each entry in this table is a L3 ipv6 filter rule.
Index to the table is L3 ipv6 filter number.

Indexes

aclL3v6ExtRuleProfileNo aclL3v6ExtRuleAccessID

Column Syntax OID

aclL3v6ExtRuleProfileNo

The Profile ID which this rule join.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.1

aclL3v6ExtRuleAccessID

L3 Filter rule ID.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.2

aclL3v6ExtRuleDscp

The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.

Integer32r/w

Constraints:
range: -1-63

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.3

aclL3v6ExtRuleProtocol

The type of protocol to be checked against the packet.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.4

aclL3v6ExtRuleFragments

Enumerationr/w

Enumerated Values:

0	none
1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.5

aclL3v6ExtRuleTcpUdpDstOperator

Enumerationr/w

Enumerated Values:

1	none
2	eq
3	gt
4	lt
5	neq
6	range

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.6

aclL3v6ExtRuleTcpUdpDstPort

The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.7

aclL3v6ExtRuleTcpUdpMinDstPort

The minimum port in the destination port range.

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.8

aclL3v6ExtRuleTcpUdpMaxDstPort

The maximum port in the destination port range.

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.9

aclL3v6ExtRuleTcpUdpSrcOperator

Enumerationr/w

Enumerated Values:

1	none
2	eq
3	gt
4	lt
5	neq
6	range

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.10

aclL3v6ExtRuleTcpUdpSrcPort

The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.11

aclL3v6ExtRuleTcpUdpMinSrcPort

The minimum port in the source port range.

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.12

aclL3v6ExtRuleTcpUdpMaxSrcPort

The maximum port in the source port range.

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.13

aclL3v6ExtRuleICMPv6MessageType

Integer32r/w

Constraints:
range: -1-255

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.14

aclL3v6ExtRuleICMPv6MessageCode

Integer32r/w

Constraints:
range: -1-255

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.15

aclL3v6ExtRuleDstIpv6Addr

Destination IPv6 address to be matched with the packet.

Ipv6Addressr/w

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.16

aclL3v6ExtRuleSrcIpv6Addr

Source IPv6 address to be matched with the packet.

Ipv6Addressr/w

Textual Convention: Ipv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.17

aclL3v6ExtRuleDstIpv6AddrPrefixLen

The prefix length for Destination IPv6 address.

InetAddressPrefixLengthr/w

Textual Convention: InetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.18

aclL3v6ExtRuleSrcIpv6AddrPrefixLen

The prefix length for Source IPv6 address.

InetAddressPrefixLengthr/w

Textual Convention: InetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.19

aclL3v6ExtRuleTcpAckBit

The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.20

aclL3v6ExtRuleTcpRstBit

The TCP RST bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.21

aclL3v6ExtRuleTcpUrgBit

The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.22

aclL3v6ExtRuleTcpPshBit

The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.23

aclL3v6ExtRuleTcpSynBit

The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.24

aclL3v6ExtRuleTcpFinBit

The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.25

aclL3v6ExtRuleFlowLabel

The flow identifier in an IPv6 header.

Integer32r/w

Constraints:
range: -1-1048575

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.26

aclL3v6ExtRuleAction

Specifies the action to be taken on the packet if the filter
rule matches.

Enumerationr/w

Enumerated Values:

1	allow
2	drop

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.27

aclL3v6ExtRuleTimeRange

An administratively assigned string, which may be used
to identify the Profile.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.28

aclL3v6ExtRuleMatchCount

Number of times this filter is matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.29

aclL3v6ExtRuleStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.30

aclExpertExtRuleTable

table

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1 · 1 row entry · 37 columns

Open in standard view

A table to configure L3 filter rules in the system.

aclExpertExtRuleEntry entry .1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1

Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number.

Indexes

aclExpertExtRuleProfileNo aclExpertExtRuleAccessID

Column Syntax OID

aclExpertExtRuleProfileNo

The Profile ID which this rule join.

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.1

aclExpertExtRuleAccessID

L3 Filter rule ID.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.2

aclExpertExtRuleProtocol

The type of protocol to be checked against the packet.

Enumerationr/w

Enumerated Values:

0	none
1	icmp
2	igmp
6	tcp
17	udp
47	gre
50	esp
88	eigrp
89	ospf
94	ipinip
103	pim
108	pcp
112	vrrp

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.3

aclExpertExtRuleFragments

Enumerationr/w

Enumerated Values:

0	none
1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.4

aclExpertExtRuleICMPMessageType

Integer32r/w

Constraints:
range: -1-255

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.5

aclExpertExtRuleICMPMessageCode

Integer32r/w

Constraints:
range: -1-255

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.6

aclExpertExtRuleDstIpAddr

Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.7

aclExpertExtRuleSrcIpAddr

Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.8

aclExpertExtRuleDstIpAddrMask

The IP subnet mask for Destination IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.9

aclExpertExtRuleSrcIpAddrMask

The IP subnet mask for Source IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.10

aclExpertExtRuleTcpUdpDstOperator

Enumerationr/w

Enumerated Values:

1	none
2	eq
3	gt
4	lt
5	neq
6	range

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.11

aclExpertExtRuleTcpUdpDstPort

The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.

Integer32r/w

Constraints:
range: -1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.12

aclExpertExtRuleTcpUdpMinDstPort

The minimum port in the destination port range.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.13

aclExpertExtRuleTcpUdpMaxDstPort

The maximum port in the destination port range.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.14

aclExpertExtRuleTcpUdpSrcOperator

Enumerationr/w

Enumerated Values:

1	none
2	eq
3	gt
4	lt
5	neq
6	range

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.15

aclExpertExtRuleTcpUdpSrcPort

The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.

Integer32r/w

Constraints:
range: -1-65535

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.16

aclExpertExtRuleTcpUdpMinSrcPort

The minimum port in the source port range.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.17

aclExpertExtRuleTcpUdpMaxSrcPort

The maximum port in the source port range.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.18

aclExpertExtRuleIPPrecedence

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.19

aclExpertExtRuleDscp

The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The aclL3RuleTos should be specified as dscp.

Integer32r/w

Constraints:
range: -1-63

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.20

aclExpertExtRuleToS

The ToS value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
The cmAclL3RuleTos should be specified as dscp.

Integer32r/w

Constraints:
range: -1-15

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.21

aclExpertExtRuleTcpAckBit

The TCP ACK bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.22

aclExpertExtRuleTcpRstBit

The TCP RST bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.23

aclExpertExtRuleTcpUrgBit

The TCP Urg bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.24

aclExpertExtRuleTcpPshBit

The TCP Psh bit to be checked against the packet. The default
value is 'donotcare'(3). which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.25

aclExpertExtRuleTcpSynBit

The TCP Syn bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.26

aclExpertExtRuleTcpFinBit

The TCP Fin bit to be checked against the packet. The default
value is 'donotcare'(3), which means the rule don't care this
condition.

Enumerationr/w

Enumerated Values:

1	establish
2	notEstablish
3	donotcare

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.27

aclExpertExtRuleDstMacAddr

Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.28

aclExpertExtRuleSrcMacAddr

Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.29

aclExpertExtRuleVlanId

Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition.

Integer32r/w

Constraints:
range: -1-4094

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.30

aclExpertExtRule1pPriority

802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition.

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.31

aclExpertExtRuleDstMacAddrMask

The MAC address Mask work for Destination MAC address.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.32

aclExpertExtRuleSrcMacAddrMask

The MAC address Mask work for Source MAC address.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.33

aclExpertExtRuleAction

Specifies the action to be taken on the packet if the filter
rule matches.

Enumerationr/w

Enumerated Values:

1	allow
2	drop

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.34

aclExpertExtRuleTimeRange

An administratively assigned string, which may be used
to identify the Profile.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.35

aclExpertExtRuleMatchCount

Number of times this filter is matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.36

aclExpertExtRuleStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.37

aclPortGroupTable

table

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1 · 1 row entry · 8 columns

Open in standard view

A table to control the port group binding information of L2 Group, 
L3v4 Group, and L3v6 Group

aclPortGroupEntry entry .1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1

An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.

Indexes

aclPortIndex

Column Syntax OID

aclPortIndex

Interface index of the port for the configuration
in this entry applies.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.1

aclPortDirection

Specifies the action to be taken on the packet if the filter
rule matches.

Enumeration

Enumerated Values:

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.2

aclPortL2ProfileNo

The L2 Profile ID which this port bind.
zero means not configured.

Integer32r/w

Constraints:
range: 0-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.3

aclPortL3v4StdProfileNo

The L3v4 Profile ID which this port bind.
zero means not configured.

Integer32r/w

Constraints:
range: 0-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.4

aclPortL3v4ExtProfileNo

The L3v4 Profile ID which this port bind.
zero means not configured.

Integer32r/w

Constraints:
range: 0-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.5

aclPortL3v6StdProfileNo

The L3v6 Profile ID which this port bind.
zero means not configured.

Integer32r/w

Constraints:
range: 0-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.6

aclPortL3v6ExtProfileNo

The L3v6 Profile ID which this port bind.
zero means not configured.

Integer32r/w

Constraints:
range: 0-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.7

aclPortExpertProfileNo

The L3v6 Profile ID which this port bind.
zero means not configured.

Integer32r/w

Constraints:
range: 0-50

.1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.8

portSecurityTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1 · 1 row entry · 10 columns

Open in standard view

Port Security Port Settings table.

portSecurityEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1

The Port Security Port Settings entry.

Indexes

portSecurityPort

Column Syntax OID

portSecurityPort

This object indicates the port index.

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.1

portSecurityState

This object indicates the Port Security Port Settings state.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.2

portSecuritySysMax

Port Security Port Settings. Maximum (1-6656)

Integer32r/w

Constraints:
range: 1-6656

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.3

portSecurityVioAction

Port Security Port Settings. Violation Action

Enumerationr/w

Enumerated Values:

1	protect
2	restrict
3	shutdown

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.4

portSecuritySecurMode

Port Security Port Settings. Security Mode

permanent(1) - Under this mode all learned MAC addresses won't be
purged unless a user deletes these entries manually.
deleteOnTimeout(2) - Under this mode…

Enumerationr/w

Enumerated Values:

2	deleteOnTimeout
3	permanent

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.5

portSecurityAgingTime

Port Security Port Settings. Aging Time (0-1440)

Integer32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.6

portSecurityAgingType

Port Security Port Settings. Aging Type.

Enumerationr/w

Enumerated Values:

1	absolute
2	inactivity

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.7

portSecurityCurrentNo

Port Security Port Settings. Current No.

Integer32

Constraints:
range: 1-1440

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.8

portSecurityVioCount

Port Security Port Settings. Violation Count.

Integer32

Constraints:
range: 1-1440

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.9

portSecurityCurState

Port Security Port Settings. Current State.

Enumeration

Enumerated Values:

0	other
1	forwarding
2	err-disabled

.1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.10

portSecAddrTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.1.3.1 · 1 row entry · 6 columns

Open in standard view

Port Security Address Entries table.

portSecAddrEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1

Port Security Address Entries entry.

Indexes

portSecAddrVID portSecAddrMAC

Column Syntax OID

portSecAddrVID

Port Security Address Entries . VID.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.1

portSecAddrMAC

Port Security Address Entries. MAC Address

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.2

portSecAddrPort

This object indicates the port index.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.3

portSecAddrType

This object indicates the secure mode.
For manually configured secure MAC addresses, the portSecAddrType is
permanent.

Enumeration

Enumerated Values:

2	deleteOnTimeout
3	permanent

.1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.4

portSecAddrRowStatus

This object indicates the port security mac table entry RowStatus.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.5

portSecAddrRemainTime

Port Security Address Entries. Remaining Time (mins).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.6

pnacPortSettingsTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1 · 1 row entry · 12 columns

Open in standard view

A table that contains the configuration objects for the
Authenticator PAE associated with each port.

pnacPortSettingsEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1

The configuration information for an Authenticator Port.

Indexes

pnacPortNumber

Column Syntax OID

pnacPortNumber

A unique value for each port that correlates to port index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.1

pnacDirection

Pnac port controlled direction.

Enumerationr/w

Enumerated Values:

0	both
1	in

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.2

pnacPortControl

The current value of the controlled Port
control parameter for the Port.

Enumerationr/w

Enumerated Values:

1	forceUnauthorized
2	auto
3	forceAuthorized

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.3

pnacForwardPDU

Enable/Disable 802.1x forward PDU function.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.4

pnacMaxReq

The value of the maxReq constant currently in use by
the Backend Authentication state machine.

Unsigned32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.5

pnacPAEAuthenticator

The current value of the controlled Port
control parameter for the Port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.6

pnacServerTimeout

The value, in seconds, of the serverTimeout constant
currently in use by the Backend Authentication state
machine.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.7

pnacSuppTimeout

The value, in seconds, of the suppTimeout constant
currently in use by the Backend Authentication state
machine.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.8

pnacTxPeriod

The value, in seconds, of the txPeriod constant
currently in use by the Authenticator PAE state
machine.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.9

pnacAuthStatsClear

The object is used for authenticator statistics information clear.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.10

pnacAuthSessStatsClear

The object is used for authenticator session statistics information clear.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.11

pnacAuthDiagClear

The object is used for authenticator diagnostics information clear.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.2.1.1.12

pnacPortAuthSessionInfoTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.1 · 1 row entry · 4 columns

Open in standard view

A table that contains the authentication session information for each port.

pnacPortAuthSessionInfoEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.3.1.1

The authentication session information for an Authenticator Port.

Indexes

pnacPortAuthPortNumber

Column Syntax OID

pnacPortAuthPortNumber

A unique value for each port that correlates to port index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.1.1.1

pnacPortAuthMac

The MAC address associated of the supplicant.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.1.1.2

pnacPortAuthPortInit

The initialization control for this Port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.1.1.3

pnacPortAuthPortReauth

The reauthentication control for this port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.1.1.4

pnacMacAuthSessionInfoTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.2 · 1 row entry · 4 columns

Open in standard view

A table that contains the authentication session information for each mac auth session.

pnacMacAuthSessionInfoEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.3.2.1

The authentication session information for each mac auth session.

Indexes

pnacMacAuthMacAddr

Column Syntax OID

pnacMacAuthMacAddr

The MAC address associated of the supplicant.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.2.1.1

pnacMacAuthPortNumber

port index concerned with mac authentication.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.2.1.2

pnacMacAuthInit

The initialization control for this mac auth session.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.2.1.3

pnacMacAuthReauth

The reauthentication control for this mac auth session.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.2.3.2.1.4

pnacPortAuthStatsTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1 · 1 row entry · 13 columns

Open in standard view

A table that contains the statistics objects for the 
Authenticator PAE associated with each Port.

pnacPortAuthStatsEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1

The statistics information for an Authenticator PAE.

Indexes

pnacPortAuthStatsPortNumber

Column	Syntax	OID
pnacPortAuthStatsPortNumber A unique value for each port that correlates to port index.	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.1`
pnacPortAuthEapolFramesRx The number of valid EAPOL frames of any type that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.2`
pnacPortAuthEapolFramesTx The number of EAPOL frames of any type that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.3`
pnacPortAuthEapolStartFramesRx The number of EAPOL Start frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.4`
pnacPortAuthEapolLogoffFramesRx The number of EAPOL Logoff frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.5`
pnacPortAuthEapolRespIdFramesRx The number of EAP Resp/Id frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.6`
pnacPortAuthEapolRespFramesRx The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.7`
pnacPortAuthEapolReqIdFramesTx The number of EAP Req/Id frames that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.8`
pnacPortAuthEapolReqFramesTx The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.9`
pnacPortAuthInvalidEapolFramesRx The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.10`
pnacPortAuthEapLengthErrorFramesRx The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.11`
pnacPortAuthLastEapolFrameVersion The protocol version number carried in the most recently received EAPOL frame.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.12`
pnacPortAuthLastEapolFrameSource The source MAC address carried in the most recently received EAPOL frame.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.1.1.13`

pnacMacAuthStatsTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2 · 1 row entry · 14 columns

Open in standard view

This table contains the statistics for the Authenticator 
PAE associated with each Supplicant,while Authenticator 
operates in MAC based authentication mode.

pnacMacAuthStatsEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1

The statistics information for an Authenticator PAE.
This shows the current values being collected for each
Supplicant.

Indexes

pnacMacAuthStatsMacAddr

Column	Syntax	OID
pnacMacAuthStatsMacAddr The MAC address associated of the supplicant.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.1`
pnacMacAuthEapolFramesRx The number of valid EAPOL frames of any type that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.2`
pnacMacAuthEapolFramesTx The number of EAPOL frames of any type that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.3`
pnacMacAuthEapolStartFramesRx The number of EAPOL Start frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.4`
pnacMacAuthEapolLogoffFramesRx The number of EAPOL Logoff frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.5`
pnacMacAuthEapolRespIdFramesRx The number of EAP Resp/Id frames that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.6`
pnacMacAuthEapolRespFramesRx The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.7`
pnacMacAuthEapolReqIdFramesTx The number of EAP Req/Id frames that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.8`
pnacMacAuthEapolReqFramesTx The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.9`
pnacMacAuthInvalidEapolFramesRx The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.10`
pnacMacAuthEapLengthErrorFramesRx The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.11`
pnacMacAuthLastEapolFrameVersion The protocol version number carried in the most recently received EAPOL frame.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.12`
pnacMacAuthLastEapolFrameSource The source MAC address carried in the most recently received EAPOL frame.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.13`
pnacMacAuthStatsPortNumber Port number for mac-based authentication statistics.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.4.2.1.14`

pnacPortAuthSessionStatsTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1 · 1 row entry · 10 columns

Open in standard view

A table that contains the session statistics objects 
for the Authenticator PAE associated with each Port. 
An entry appears in this table for each port that may 
authenticate access to itself.

pnacPortAuthSessionStatsEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1

The session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where…

Indexes

pnacPortAuthSessionPortNumber

Column Syntax OID

pnacPortAuthSessionPortNumber

A unique value for each port that correlates to port index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.1

pnacPortAuthSessionOctetsRx

The number of octets received in user data
frames on this Port during the session.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.2

pnacPortAuthSessionOctetsTx

The number of octets transmitted in user data
frames on this Port during the session.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.3

pnacPortAuthSessionFramesRx

The number of user data frames received
on this Port during the session.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.4

pnacPortAuthSessionFramesTx

The number of user data frames transmitted
on this Port during the session.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.5

pnacPortAuthSessionId

A unique identifier for the session, in the
form of a printable ASCII string of at least
three characters.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.6

pnacPortAuthSessionAuthenticMethod

The authentication method used to establish the
session.

Enumeration

Enumerated Values:

0	none
1	remoteAuthServer
2	localAuthServer

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.7

pnacPortAuthSessionTime

The duration of the session in seconds.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.8

pnacPortAuthSessionTerminateCause

The reason for the session termination.

Enumeration

Enumerated Values:

1	supplicantLogoff
2	portFailure
3	supplicantRestart
4	reauthFailed
5	authControlForceUnauth
6	portReInit
7	portAdminDisabled
999	notTerminatedYet

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.9

pnacPortAuthSessionUserName

The User-Name representing the identity of the
Supplicant PAE.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.1.1.10

pnacMacAuthSessionStatsTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2 · 1 row entry · 11 columns

Open in standard view

This table contains the session statistics  
for the Authenticator PAE associated with each  
Supplicant,while Authenticator operates in  MAC 
based authentication mode.

pnacMacAuthSessionStatsEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1

The session statistics information for an
Authenticator PAE. This shows the current values being
collected for each session that is still in progress,
or the final values for the last valid session on each
port wher…

Indexes

pnacMacAuthSessionSuppAddress

Column Syntax OID

pnacMacAuthSessionSuppAddress

The MAC address associated of the supplicant.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.1

pnacMacAuthSessionOctetsRx

Counts number of session octets received.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.2

pnacMacAuthSessionOctetsTx

Counts number of session octets transmitted.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.3

pnacMacAuthSessionFramesRx

Counts number of session frames received.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.4

pnacMacAuthSessionFramesTx

Counts number of session frames transmitted.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.5

pnacMacAuthSessionId

A unique Session identifier, in the form of a
printable ASCII string of at least three characters.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.6

pnacMacAuthSessionAuthenticMethod

Authentication method used to establish the
session.

Enumeration

Enumerated Values:

0	none
1	remoteAuthServer
2	localAuthServer

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.7

pnacMacAuthSessionTime

Duration of the session in seconds.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.8

pnacMacAuthSessionTerminateCause

Reason for the session termination.

Enumeration

Enumerated Values:

1	supplicantLogoff
2	portFailure
3	supplicantRestart
4	reauthFailed
5	authControlForceUnauth
6	portReInit
7	portAdminDisabled
999	notTerminatedYet

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.9

pnacMacAuthSessionUserName

User name representing the identity of the
Supplicant PAE.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.10

pnacMacAuthSessionPortNumber

Port number for Mac-based authentication session information.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.2.5.2.1.11

pnacPortAuthDiagTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1 · 1 row entry · 19 columns

Open in standard view

A table that contains the diagnostics objects for the 
Authenticator PAE associated with each Port. 
An entry appears in this table for each port that may 
authenticate access to itself.

pnacPortAuthDiagEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1

The diagnostics information for an Authenticator PAE.

Indexes

pnacPortAuthDiagPortNumber

Column	Syntax	OID
pnacPortAuthDiagPortNumber A unique value for each port that correlates to port index.	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.1`
pnacPortAuthEntersConnecting Counts the number of times that the state machine transitions to the CONNECTING state from any other state.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.2`
pnacPortAuthEapLogoffsWhileConnecting Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.3`
pnacPortAuthEntersAuthenticating Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.4`
pnacPortAuthAuthSuccessWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (aut…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.5`
pnacPortAuthAuthTimeoutsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.6`
pnacPortAuthAuthFailWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.7`
pnacPortAuthAuthReauthsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.8`
pnacPortAuthAuthEapStartsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.9`
pnacPortAuthAuthEapLogoffWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.10`
pnacPortAuthAuthReauthsWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.11`
pnacPortAuthAuthEapStartsWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.12`
pnacPortAuthAuthEapLogoffWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.13`
pnacPortAuthBackendResponses Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.14`
pnacPortAuthBackendAccessChallenges Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authen…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.15`
pnacPortAuthBackendOtherRequestsToSupplicant Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state)…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.16`
pnacPortAuthBackendNonNakResponsesFromSupplicant Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state mac…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.17`
pnacPortAuthBackendAuthSuccesses Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Suppl…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.18`
pnacPortAuthBackendAuthFails Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.1.1.19`

pnacMacAuthDiagStatsTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2 · 1 row entry · 20 columns

Open in standard view

This table contains the Diagnostics statistics for the Authenticator 
PAE associated with each Supplicant,while Authenticator 
operates in MAC based authentication mode.

pnacMacAuthDiagStatsEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1

The Diagnostics statistics information for an Authenticator PAE.
This shows the current values being collected for each
Supplicant.

Indexes

pnacMacAuthDiagSuppAddress

Column	Syntax	OID
pnacMacAuthDiagSuppAddress The MAC address associated of the supplicant.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.1`
pnacMacAuthEntersConnecting Counts the number of times that the state machine transitions to the CONNECTING state from any other state.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.2`
pnacMacAuthEapLogoffsWhileConnecting Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.3`
pnacMacAuthEntersAuthenticating Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.4`
pnacMacAuthAuthSuccessWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (aut…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.5`
pnacMacAuthAuthTimeoutsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.6`
pnacMacAuthAuthFailWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.7`
pnacMacAuthAuthReauthsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.8`
pnacMacAuthAuthEapStartsWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.9`
pnacMacAuthAuthEapLogoffWhileAuthenticating Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.10`
pnacMacAuthAuthReauthsWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.11`
pnacMacAuthAuthEapStartsWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.12`
pnacMacAuthAuthEapLogoffWhileAuthenticated Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.13`
pnacMacAuthBackendResponses Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.14`
pnacMacAuthBackendAccessChallenges Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authen…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.15`
pnacMacAuthBackendOtherRequestsToSupplicant Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state)…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.16`
pnacMacAuthBackendNonNakResponsesFromSupplicant Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state mac…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.17`
pnacMacAuthBackendAuthSuccesses Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Suppl…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.18`
pnacMacAuthBackendAuthFails Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.19`
pnacMacAuthDiagPortNumber Port number for Mac-based authentication diagnostics.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.8.2.6.2.1.20`

aaaNETAuthTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1 · 1 row entry · 10 columns

Open in standard view

The table configure AAA Network authentication method.

aaaNETAuthEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1

An entry represent each protocol authentication method.

Indexes

aaaNETAuthType

Column Syntax OID

aaaNETAuthType

The protocol which need authentication.

Enumeration

Enumerated Values:

1	dot1x
2	macauth
3	webauth
4	jwac

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.1

aaaNETAuthStatus

Enable/Disable AAA Authentication Network.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.2

aaaNETAuthFirstMethod

AAA Authentication Network first Method type.

Enumerationr/w

Enumerated Values:

0	none
1	local
2	group
3	radius

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.3

aaaNETAuthFirstServerGroupName

AAA Authentication Network first server group name.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.4

aaaNETAuthSecondMethod

AAA Authentication Network second Method type.

Enumerationr/w

Enumerated Values:

0	none
1	local
2	group
3	radius

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.5

aaaNETAuthSecondServerGroupName

AAA Authentication Network second server group name.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.6

aaaNETAuthThirdMethod

AAA Authentication Network Third Method type.

Enumerationr/w

Enumerated Values:

0	none
1	local
2	group
3	radius

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.7

aaaNETAuthThirdServerGroupName

AAA Authentication Network Third server group name.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.8

aaaNETAuthForthMethod

AAA Authentication Network Forth Method type.

Enumerationr/w

Enumerated Values:

0	none
1	local
2	group
3	radius

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.9

aaaNETAuthForthServerGroupName

AAA Authentication Network Forth server group name.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.3.2.1.1.10

radiusServerTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1 · 1 row entry · 9 columns

Open in standard view

A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself.

radiusServerEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1

The configuration information for an Authenticator Port.

Indexes

radiusServerIndex

Column Syntax OID

radiusServerIndex

A unique value for Authentication RADIUS Server index.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.1

radiusServerIPType

The IP address of the RADIUS server IP type referred to in this table entry.

Enumerationr/w

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.2

radiusServerAddress

The IP address of the RADIUS server referred to in this table entry.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.3

radiusServerAuthPort

The value is for setting UDP Port.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.4

radiusServerRetransmit

The value is for setting UDP Port.

Integer32r/w

Constraints:
range: 0-20

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.5

radiusServerTimeout

The value is for setting UDP Port.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.6

radiusServerKeyType

Radius Server key type: plain text or encrypted.

Enumerationr/w

Enumerated Values:

1	plaintext
2	encrypted

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.7

radiusServerKey

This object is used to set 802.1X Radius Server Key,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.8

radiusServerRowStatus

The status of this conceptual row in the
radiusServerTable.

An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through defaul…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.8.4.2.1.1.9

radiusServerGroupTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.4.3.1 · 1 row entry · 3 columns

Open in standard view

A table that contains informations about server group.

radiusServerGroupEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.4.3.1.1

A list of the group including servers.

Indexes

radiusServerGroupName

Column Syntax OID

radiusServerGroupName

A human-readable text string of the method group.

OctetString

Constraints:
range: 1-15

.1.3.6.1.4.1.171.10.139.2.1.8.4.3.1.1.1

radiusServersInGroup

The list of servers in the group, each bit indicates a specified server ID.
The server must be created before including it.

Bitsr/w

Enumerated Values:

0	id1
1	id2
2	id3
3	id4
4	id5
5	id6
6	id7
7	id8
8	id9
9	id10
10	id11
11	id12
12	id13
13	id14
14	id15
15	id16

.1.3.6.1.4.1.171.10.139.2.1.8.4.3.1.1.2

radiusServerGroupRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.8.4.3.1.1.3

radiusAuthServerTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1 · 1 row entry · 14 columns

Open in standard view

The (conceptual) table taht lists the RADIUS authentication
servers with which the client shares a secret.

radiusAuthServerEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1

An entry (conceptual row) that represents a RADIUS
authentication server with which the client shares
a secret.

Indexes

radiusAuthServerIndex

Column Syntax OID

radiusAuthServerIndex

A unique value for Authentication RADIUS Server index.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.1

radiusAuthClientRoundTripTime

The time interval (in hundredths of a second) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that that matches with the
Access-Reply/Access-Challengeit from the RADIUS
authentication serve…

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.2

radiusAuthClientAccessRequests

The number of RADIUS Access-Request packets sent
to this server. This does not include retransmissions.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.3

radiusAuthClientAccessRetransmissions

The number of RADIUS Access-Request packets
retransmitted to this RADIUS authentication server.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.4

radiusAuthClientAccessAccepts

The number of RADIUS Access-Accept packets
(valid or invalid) received from this server.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.5

radiusAuthClientAccessRejects

The number of RADIUS Access-Reject packets
(valid or invalid) received from this server.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.6

radiusAuthClientAccessChallenges

The number of RADIUS Access-Challenge packets
(valid or invalid) received from this server.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.7

radiusAuthClientMalformedAccessResponses

The number of malformed RADIUS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
Signature attributes or unknown types are not
included as…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.8

radiusAuthClientBadAuthenticators

The number of RADIUS Access-Response packets
containing invalid authenticators or Signature
attributes received from this server.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.9

radiusAuthClientPendingRequests

The number of RADIUS Access-Request packets
destined for this server, which have not yet timed out
or received a response. This variable is incremented
when an Access-Request is sent and is decremented due to
receipt of…

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.10

radiusAuthClientTimeouts

The number of authentication timeouts to this server.
After the entry timeout the client may retry to the same
server, send to a different server, or
give up. Retry to the same server is counted as a
retransmit as well …

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.11

radiusAuthClientUnknownTypes

The number of RADIUS packets of unknown type, which
were received from this server on the authentication port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.12

radiusAuthClientPacketsDropped

The number of RADIUS packets, which were
received from this server on the authentication port
and dropped for some other reason.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.13

radiusAuthClientStatisticClear

This object is used for Radius Auth Client Statistics information clear.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.4.4.1.1.14

dhcpSerScrProfileTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.7.1.4 · 1 row entry · 3 columns

Open in standard view

A table to configure dhcp server screen profile information.

dhcpSerScrProfileEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.7.1.4.1

A list of entries to configure dhcp server screen profile information.

Indexes

dhcpSerScrProfileName dhcpSerScrProfileClientMac

Column Syntax OID

dhcpSerScrProfileName

The DSS Profile name.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.7.1.4.1.1

dhcpSerScrProfileClientMac

The DSS Profile Client MAC.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.8.7.1.4.1.2

dhcpSerScrProfileRowStatus

The row status of an entry in the dhcp server screen profile Table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.8.7.1.4.1.3

dhcpSerScrLogTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.7.1.5 · 1 row entry · 5 columns

Open in standard view

Log Entries in the table are automatically created when dhcp server 
screen violation occurence.

dhcpSerScrLogEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1

An entry in the dhcpSerScrLogTable. Entries are automatically created
whenever dhcp server screen violation occurence.

Indexes

dhcpSerScrLogIndex

Column	Syntax	OID
dhcpSerScrLogIndex Dhcp server screening log entry index.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.1`
dhcpSerScrLogVlanID dhcp server screening log vlan id infomation.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.2`
dhcpSerScrLogIPAddr dhcp server screening log ip infomation.	INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.3`
dhcpSerScrLogMacAddr dhcp server screening log mac address infomation.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.4`
dhcpSerScrLogOccurrence dhcp server screening log occurrence infomation.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.5`

dhcpSerScrPortTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.7.2.1 · 1 row entry · 5 columns

Open in standard view

The table of DHCP Server Screening Port Settings.

dhcpSerScrPortEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1

The list of DHCP Server Screening Port Settings entry.

Indexes

dhcpSerScrPortIndex

Column Syntax OID

dhcpSerScrPortIndex

DHCP Server Screening Port Settings . Port.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.1

dhcpSerScrPortState

DHCP Server Screening Port Settings. State.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.2

dhcpSerScrPortServerAddrType

DHCP Server Screening IP Type: IPv4/IPv6.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.3

dhcpSerScrPortServerIP

DHCP Server Screening Port Settings. Server IP.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.4

dhcpSerScrPortProfileName

DHCP Server Screening Port Settings. Profile Name.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.5

networkAuthUserTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.12.1.3 · 1 row entry · 5 columns

Open in standard view

A table that contains the local user information.

networkAuthUserEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.12.1.3.1

The configuration information for each user.

Indexes

networkAuthUserName

Column Syntax OID

networkAuthUserName

The unique index value of a row in this table.

This object is used to set 802.1X Local user name.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.12.1.3.1.1

networkAuthUserAssignVlan

The port vlan entry after which the Authentication
offerred to the User ceases. When the object value
is 0, the Authenticator port will not be assigned to new vlan.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.12.1.3.1.2

networkAuthUserPasswordType

User password type: plain text or encrypted.

Enumerationr/w

Enumerated Values:

1	plaintext
2	encrypted

.1.3.6.1.4.1.171.10.139.2.1.8.12.1.3.1.3

networkAuthUserPassword

This object is used to set 802.1X Local user Password.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.12.1.3.1.4

networkAuthUserStatus

The status of this conceptual row in the networkAuthUserTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.8.12.1.3.1.5

networkAuthPortSettingsTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.12.2.1 · 1 row entry · 7 columns

Open in standard view

A table that contains the configuration objects for the
Authenticator PAE associated with each port.

networkAuthPortSettingsEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.12.2.1.1

The configuration information for an Authenticator Port.

Indexes

networkAuthPortNumber

Column Syntax OID

networkAuthPortNumber

A unique value for each port that correlates to port index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.8.12.2.1.1.1

networkAuthHostMode

Configuration of the port, for Port Based
Authentication or MAC Based Authentication.

Enumerationr/w

Enumerated Values:

1	multihost
2	multiauth

.1.3.6.1.4.1.171.10.139.2.1.8.12.2.1.1.2

networkAuthHostVlanList

Vlan List from which client packet received.

OctetStringr/w

.1.3.6.1.4.1.171.10.139.2.1.8.12.2.1.1.3

networkAuthPeriodic

The enable/disable control used by the Reauthentication
Timer state machine.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.8.12.2.1.1.4

networkAuthReAuthTimer

The value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.12.2.1.1.5

networkAuthRestart

The value, in seconds, of the quietPeriod constant
currently in use by the Authenticator PAE state
machine.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.12.2.1.1.6

networkAuthGuestVlan

Configure port's guest VLAN. 0 represent for not configured.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.12.2.1.1.7

networkPortAuthSessionInfoTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1 · 1 row entry · 10 columns

Open in standard view

A table that contains the network authentication session information for each port.

networkPortAuthSessionInfoEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1

The authentication session information for an Authenticator Port.

Indexes

networkPortAuthPortNumber

Column Syntax OID

networkPortAuthPortNumber

A unique value for each port that correlates to port index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.1

networkPortAuthMac

The MAC address associated of the supplicant.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.2

networkPortAuthVlan

The vlan from which supplicant authentication request received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.3

networkPortAuthUserName

The User-Name representing the identity of the Supplicant PAE.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.4

networkPortAuthPaeState

The current value of the Authenticator PAE state
machine.

Enumeration

Enumerated Values:

1	initialize
2	disconnected
3	connecting
4	authenticating
5	authenticated
6	aborting
7	held
8	forceAuth
9	forceUnauth

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.5

networkPortAuthBackendState

The current state of the Backend Authentication
state machine.

Enumeration

Enumerated Values:

1	request
2	response
3	success
4	fail
5	timeout
6	idle
7	initialize

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.6

networkPortAuthFailReason

Authentication failure reason.

Enumeration

Enumerated Values:

0	none
1	userauthfail
2	noserverrespond
3	noserverconfig
4	noresource
5	usertimeout

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.7

networkPortAuthAssignIngressBandwidth

Port Assignment Ingress Bandwidth from Radius Server after authentication pass.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.8

networkPortAuthAssignEgressBandwidth

Port Assignment Egress Bandwidth from Radius Server after authentication pass.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.9

networkPortAuthAssignPriority

Port Assignment Priority from Radius Server after authentication pass.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.1.1.10

networkMacAuthSessionInfoTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.2 · 1 row entry · 7 columns

Open in standard view

A table that contains the authentication session information for each mac auth session.

networkMacAuthSessionInfoEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.12.3.2.1

The authentication session information for each mac auth session.

Indexes

networkMacAuthMacAddr

Column Syntax OID

networkMacAuthMacAddr

The MAC address associated of the supplicant.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.2.1.1

networkMacAuthPortNumber

port index concerned with mac authentication.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.2.1.2

networkMacAuthVlan

The vlan from which supplicant authentication request received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.2.1.3

networkMacAuthUserName

The User-Name representing the identity of the Supplicant PAE.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.2.1.4

networkMacAuthPaeState

The current value of the Authenticator PAE state
machine.

Enumeration

Enumerated Values:

1	initialize
2	disconnected
3	connecting
4	authenticating
5	authenticated
6	aborting
7	held
8	forceAuth
9	forceUnauth

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.2.1.5

networkMacAuthBackendState

The current state of the Backend Authentication
state machine.

Enumeration

Enumerated Values:

1	request
2	response
3	success
4	fail
5	timeout
6	idle
7	initialize

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.2.1.6

networkMacAuthFailReason

Authentication failure reason.

Enumeration

Enumerated Values:

0	none
1	userauthfail
2	noserverrespond
3	noserverconfig
4	noresource
5	usertimeout

.1.3.6.1.4.1.171.10.139.2.1.8.12.3.2.1.7

trustedHostTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.14.1 · 1 row entry · 3 columns

Open in standard view

A table to configure trusted host in the system.

trustedHostEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.14.1.1

Each entry in this table represents rules for particular
trusted host.

Indexes

trustedHostType trustedHostACLName

Column Syntax OID

trustedHostType

Type of trusted host.

Enumeration

Enumerated Values:

1	telnet
2	ping
3	http
4	https

.1.3.6.1.4.1.171.10.139.2.1.8.14.1.1.1

trustedHostACLName

ACL access list name.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.8.14.1.1.2

trustedHostRowStatus

The status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.8.14.1.1.3

trafficSegmentationTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.15.1 · 1 row entry · 2 columns

Open in standard view

A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table. 
This Port-channel table is indexed through Key values and allows to 
configure link selection policy and the Mac address for 
the port-channel. All other objects in this table displays 
the details of the port-channel

trafficSegmentationEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.15.1.1

There is one entry in this table for each created
port-channel port

Indexes

trafficSegmentationIfIndex

Column	Syntax	OID
trafficSegmentationIfIndex The ifIndex of the port-channel(Aggregator's interface index).	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.8.15.1.1.1`
trafficSegmentationMemberList Port list of port channel.	PortListr/w Textual Convention: PortList `OctetString`	`.1.3.6.1.4.1.171.10.139.2.1.8.15.1.1.2`

stormCtrlTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4 · 1 row entry · 3 columns

Open in standard view

The traffic control table.

stormCtrlEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4.1

The traffic control entry.

Indexes

stormCtrlIndex

Column Syntax OID

stormCtrlIndex

The traffic control index.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4.1.1

stormCtrlActionMode

The action mode of traffic control.

Enumerationr/w

Enumerated Values:

0	none
1	drop
2	shutdown

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4.1.2

stormCtrlLevelType

The Traffic control level type: pps or kbps.

Enumerationr/w

Enumerated Values:

1	pps
2	kbps

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4.1.3

stormCtrlThresholdTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5 · 1 row entry · 6 columns

Open in standard view

The traffic control table.

stormCtrlThresholdEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1

The traffic control entry.

Indexes

stormCtrlThresholdIndex stormCtrlThresholdType

Column Syntax OID

stormCtrlThresholdIndex

The traffic control index.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.1

stormCtrlThresholdType

The control type of traffic control.

Enumeration

Enumerated Values:

1	broadcast
2	multicast
3	unicast

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.2

stormCtrlThresholdRiseThre

The rise threshold of traffic control.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.3

stormCtrlThresholdLowThre

The low threshold of traffic control.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.4

stormCtrlThresholdCurrRate

The current rate of traffic control.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.5

stormCtrlThresholdStormState

This object indicates the current status of storm control on a
given interface for a given traffic type.

Enumeration

Enumerated Values:

1	forwarding
2	dropped
3	errorDisabled
4	linkDown
5	inactive

.1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.6

doSCtrlTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.17.1 · 1 row entry · 3 columns

Open in standard view

A table that holds the DoS prevention settings of the device.

doSCtrlEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.17.1.1

A list of DoS prevention settings of the device.

Indexes

doSCtrlType

Column Syntax OID

doSCtrlType

This object indicates the DoS prevention type.

Enumeration

Enumerated Values:

1	land-attack
2	blat-attack
3	tcp-null-scan
4	tcp-xmascan
5	tcp-synfin
6	tcp-syn-srcport-less-1024
7	ping-of-death-attack
8	tcp-tiny-fragment-attack

.1.3.6.1.4.1.171.10.139.2.1.8.17.1.1.1

doSCtrlState

This object indicates the status of the DoS prevention type.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.171.10.139.2.1.8.17.1.1.2

doSCtrlActionType

This object indicates the action for the DoS prevention type.
If this object is set to 'mirror' and DoSCtrlState is set to 'enable', the configuration
will not take effect until a valid mirror port is specified. If mi…

Enumerationr/w

Enumerated Values:

drop

.1.3.6.1.4.1.171.10.139.2.1.8.17.1.1.3

sslServicePolicyTable

table

.1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3 · 1 row entry · 4 columns

Open in standard view

A table controlls the parameters of SSL service policies.

sslServicePolicyEntry entry .1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1

The row in the dSslServicePolicyTable containing the
parameters of a SSL service policy.

An entry is created/removed when a name for a specific
policy is generated or deleted via CLI or by issuing appropria…

Indexes

sslServicePolicyName

Column Syntax OID

sslServicePolicyName

Indicates the name of the policy for which this entry pertains to.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1.1

sslServicePolicyCipherSuites

This object is to configure the cipher-suites list.

This field is a bit mask, setting a bit indicates that the
corresponding cipher-list will be involved in the server
authentication.

I…

Bitsr/w

Enumerated Values:

0	rsa-null-md5
1	rsa-null-sha
2	rsa-des-sha
3	rsa-3des-sha
4	dh-rsa-des-sha
5	dh-rsa-3des-sha
6	rsa-exp1024-des-sha
7	rsa-with-aes-128-cbc-sha
8	rsa-with-aes-256-cbc-sha
9	dhe-rsa-with-aes-128-cbc-sha
10	dhe-rsa-with-aes-256-cbc-sha

.1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1.2

sslServicePolicyCacheTimeout

This object indicates the Cache Timeout value in the policy for
SSL module to refresh the session resume data kept in database.

Unsigned32r/w

Constraints:
range: 60-86400

.1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1.4

sslServicePolicyRowStatus

Status of this policy.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1.5

cableDiagTestPairTable

table

.1.3.6.1.4.1.171.10.139.2.1.9.1.2 · 1 row entry · 10 columns

Open in standard view

A table to get pair state and pair len.

cableDiagTestPairEntry entry .1.3.6.1.4.1.171.10.139.2.1.9.1.2.1

An entry appears in this table for each interface
Test in the system.

Indexes

cableDiagTestPortPair

Column Syntax OID

cableDiagTestPortPair

Record the cable diagnostic Test Port.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.1

cableDiagTestResultPair1

virtual cable test pair1 test result.

Enumeration

Enumerated Values:

0	ok
1	open
2	short
4	crosstalk
5	notAvailable

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.2

cableDiagTestResultPair2

virtual cable test pair2 test result.

Enumeration

Enumerated Values:

0	ok
1	open
2	short
4	crosstalk
5	notAvailable

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.3

cableDiagTestResultPair3

virtual cable test pair3 test result.

Enumeration

Enumerated Values:

0	ok
1	open
2	short
4	crosstalk
5	notAvailable

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.4

cableDiagTestResultPair4

virtual cable test pair4 test result.

Enumeration

Enumerated Values:

0	ok
1	open
2	short
4	crosstalk
5	notAvailable

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.5

cableDiagTestLenPair1

virtual cable test pair1 fault distance.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.6

cableDiagTestLenPair2

virtual cable test pair2 fault distance.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.7

cableDiagTestLenPair3

virtual cable test pair3 fault distance.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.8

cableDiagTestLenPair4

virtual cable test pair4 fault distance.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.9

cableDiagTestLenPairClear

Clear virtual cable test results.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.10

statisticsCountersTable

table

.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1 · 1 row entry · 33 columns

Open in standard view

A list of interface entries.  The number of entries is
given by the value of ifNumber.

statisticsCountersEntry entry .1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1

An entry containing management information applicable to a
particular interface.

Indexes

statPort

Column	Syntax	OID
statPort	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.1`
statPortRxRateBytes Port RX Rate bytes/sec.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.2`
statPortRxRatePackets Port RX Rate Packets/sec.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.3`
statPortRxTotalBytes Port Rx Total Bytes/sec.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.4`
statPortRxTotalPackets Port Rx Total Packets/sec.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.5`
statPortTxRateBytes Port Tx Rate Bytes/sec.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.6`
statPortTxRatePackets Port Tx Rate Packets/sec.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.7`
statPortTxTotalBytes Port Tx Total Bytes/sec.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.8`
statPortTxTotalPackets Port Tx Total Packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.9`
statPortRxMulticast Port Rx multicast Packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.10`
statPortRxUnicast Port Rx unicast Packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.11`
statPortRxBroadcast Port Rx broadcast Packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.12`
statPortTxMulticast Port Tx multicast Packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.13`
statPortTxUnicast Port Tx unicast Packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.14`
statPortTxBroadcast Port Tx broadcast Packets.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.15`
statCountersrxHCPkt64Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.16`
statCountersrxHCPkt65to127Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.17`
statCountersrxHCPkt128to255Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.18`
statCountersrxHCPkt256to511Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.19`
statCountersrxHCPkt512to1023Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.20`
statCountersrxHCPkt1024to1518Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.21`
statCountersrxHCPkt1519to2047Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.22`
statCountersrxHCPkt2048to4095Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.23`
statCountersrxHCPkt4096to9216Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.24`
statCounterstxHCPkt64Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.25`
statCounterstxHCPkt65to127Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.26`
statCounterstxHCPkt128to255Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.27`
statCounterstxHCPkt256to511Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.28`
statCounterstxHCPkt512to1023Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.29`
statCounterstxHCPkt1024to1518Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.30`
statCounterstxHCPkt1519to2047Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.31`
statCounterstxHCPkt2048to4095Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.32`
statCounterstxHCPkt4096to9216Octets .	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.33`

statisticsErrorTable

table

.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1 · 1 row entry · 28 columns

Open in standard view

A list of interface entries.  The number of entries is
given by the value of ifNumber.

statisticsErrorEntry entry .1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1

An entry containing management information applicable to a
particular interface.

Indexes

statPortCountPort

Column	Syntax	OID
statPortCountPort A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.1`
statCountersrxDroppkts .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.2`
statCountersrxMTUDropPkts .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.3`
statPortCountDeferredTx A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisi…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.4`
statCountersdot3StatsSingleColFrames .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.5`
statPortCountExcessCol A count of frames for which transmission on a particular interface fails due to excessive collisions. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities i…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.6`
statPortCountLateCol The number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet. A (late) collision included in a count represented by an instance of t…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.7`
statPortCountAlignErr .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.8`
statPortCountFCSErr A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short err…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.9`
statCountersifOutDiscards .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.10`
statPortCountMultiCol .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.11`
statPortCountCarriSen .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.12`
statPortCountSQETestErr .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.13`
statCountersdot3StatsDeferredTransmisions .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.14`
statPortCountIntMacTx A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding in…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.15`
statPortCountIntMacRx A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instan…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.16`
statCountersrxCRCAlignErrors .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.17`
statCountersrxUndersizedPkts .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.18`
statCountersrxOversizedPkts .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.19`
statCountersrxFragmentPkts .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.20`
statCountersrxJabbers .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.21`
statCountersrxSymbolErrors .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.22`
statCountersrxMulticastDropPkts .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.23`
statCountersifInErrors .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.24`
statCountersifOutErrors .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.25`
statCountersifInDiscards .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.26`
statCountersifInUnknownProtos .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.27`
statCounterstxDelayExceededDiscards .	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.28`

statisticsCounterClearTable

table

.1.3.6.1.4.1.171.10.139.2.1.10.2.3.1 · 1 row entry · 3 columns

Open in standard view

A list of interface entries.  The number of entries is
given by the value of ifNumber.

statisticsCounterClearEntry entry .1.3.6.1.4.1.171.10.139.2.1.10.2.3.1.1

An entry containing management information applicable to a
particular interface.

Indexes

statCounterClearIndex

Column Syntax OID

statCounterClearIndex

A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remain constant at least from one re-initiali…

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.10.2.3.1.1.1

statCounterClearStatus

Enable or disable statCounter Counters Clear on read by port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.10.2.3.1.1.2

statCounterLinkChange

Counter the linkchange times by port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.171.10.139.2.1.10.2.3.1.1.3

mirrorSessionTable

table

.1.3.6.1.4.1.171.10.139.2.1.10.3.1 · 1 row entry · 5 columns

Open in standard view

A table to Session Table.

mirrorSessionEntry entry .1.3.6.1.4.1.171.10.139.2.1.10.3.1.1

An entry appears in Session Table.

Indexes

mirrorSessionNumber

Column Syntax OID

mirrorSessionNumber

Specifies the port to which the mirrored traffic in the system
is to be copied.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.1

mirrorDestinationPort

Mirror Settings. Destination port.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.2

mirrorSourceIngressPort

This object indicates the port index.

PortListr/w

Textual Convention: PortList OctetString

.1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.3

mirrorSourceEgressPort

This object indicates the port index.

PortListr/w

Textual Convention: PortList OctetString

.1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.4

mirrorSessionRowStatus

Specifies the validity of the entry, max entry number is 4.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.5

powerSavingShutdownTable

table

.1.3.6.1.4.1.171.10.139.2.1.11.1.3.1 · 1 row entry · 2 columns

Open in standard view

The table of Power Saving Shutdown.

powerSavingShutdownEntry entry .1.3.6.1.4.1.171.10.139.2.1.11.1.3.1.1

The list of Power Saving Shutdown entry.

Indexes

psShutdownPort

Column	Syntax	OID
psShutdownPort SNMP Linkchange Trap Settings.	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.171.10.139.2.1.11.1.3.1.1.1`
psShutdownTimeRange Time Range Settings Name.	OctetStringr/w Constraints: `range: 1-20`	`.1.3.6.1.4.1.171.10.139.2.1.11.1.3.1.1.2`

greenEeeTable

table

.1.3.6.1.4.1.171.10.139.2.1.11.2.1 · 1 row entry · 2 columns

Open in standard view

The port eee table.

greenEeeEntry entry .1.3.6.1.4.1.171.10.139.2.1.11.2.1.1

The port eee entry.

Indexes

eeePort

Column Syntax OID

eeePort

This object indicates the port index.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.171.10.139.2.1.11.2.1.1.1

eeestate

This object indicates the port eee state.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.171.10.139.2.1.11.2.1.1.2