stpPortPriority
DLINK-DXS-1210-10TS-AX-MIB ·
.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.12
Object
column
r/w
Integer32
The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
Context
- MIB
- DLINK-DXS-1210-10TS-AX-MIB
- OID
.1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- stpPortConfigurationEntry
- Table
- stpPortConfigurationTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-240
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| stpPort The Port number of the port for which this entry contains
spanning tree information. | column | Integer32 | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.1 |
| stpPortTCNFilter A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.10 |
| stpPortFowardBPDU This object is for enabling or disabling forward BPDU. | column | Enumeration | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.11 |
| stpPortHelloTime The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second. | column | Integer32 | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.13 |
| stpPortAdminPathCost The administratively assigned value for the contribution
of this port to the path cost of paths toward the spanning
tree root.
Writing a value of '0' assigns the automatically cal… | column | Integer32 | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.2 |
| stpPortPathCost The contribution of this port to the path cost of
paths towards the MSTI Root which include this port. | column | Integer32 | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.3 |
| stpPortState Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the… | column | Enumeration | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.4 |
| stpPortGuardRoot A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a P… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.5 |
| stpPortLinkType The administrative point-to-point status of the LAN segment
attached to this port. A value of p2p(0) indicates that
this port should always be treated as if it is connected to
a … | column | Enumeration | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.6 |
| stpPortOperLinkType The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is… | column | Enumeration | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.7 |
| stpPortFast The administrative value of the Edge Port parameter. A
value of edge(0) indicates that this port should be
assumed as an edge-port and a value of disabled(1) indicates
that this … | column | Enumeration | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.8 |
| stpPortOperFast The operational value of the Edge Port parameter. The
object is initialized to the value of
stpPortFast and is set FALSE on reception
of a BPDU. | column | Enumeration | .1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.9 |