CTRON-ISDN-CONFIGURATION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
49

isdnDchTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.4.1.1 · 1 row entry · 11 columns
Open in standard view 
A list of D channnel interfaces entries. The list consists
of a single entry at this time.
isdnDchEntry entry .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1
A D channnel interface entry containing objects relating to
the particular D channel.
Indexes
isdnDchIndex
Column Syntax OID
isdnDchIndex mandatory
A unique index for this D Channel of this ISDN-Controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.1
isdnDchRateAccess mandatory
The Rate Access of this ISDN interface.
Enumeration
Enumerated Values:
1other
2bri1
3pri1
4pri2
 .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.2
isdnDchAllowedCh mandatory
A bit string with bit 1 signifiying time slot 1. A set
bit means that a B channel may be allocated on that time slot.
A reset bit means the channel is reserved or otherwise out of service.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.3
isdnDchChInUse mandatory
A bit string with bit 1 signifying time slot 1. A set
bit means that a B channel has been allocated on that time slot.
A reset bit means the channel is available, reserved, or otherwise
out of service.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.4
isdnDchSupportedSwitches mandatory
A bit string with each bit position signifying support of
a specific switch type as indicated by the list. A set bit means
that that switch type is supported.
Enumeration
Enumerated Values:
2bri5ESS
5bridms100
10brini1
16pri4ESS
17pri5ESS
 .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.5
isdnDchSwitchType mandatory
Switch type selector as indicated by the list.
Enumerationr/w
Enumerated Values:
2bri5ESS
5bridms100
10brini1
16pri4ESS
17pri5ESS
 .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.6
isdnDchSPID1 mandatory
The Service profile identifier for BRI channel 1.
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.7
isdnDchSPID2 mandatory
The Service profile identifier for BRI channel 2.
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.8
isdnDchDirNum1 mandatory
The local directory number for BRI channel 1.
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.9
isdnDchDirNum2 mandatory
The local directory number for BRI channel 2.
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.10
isdnDchOperStatus mandatory
The operational status of the signalling channel.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.11

dialCtlNbrCfgTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.4.1.2 · 1 row entry · 5 columns
Open in standard view 
The list of neighbors from which the managed device
will accept calls or to which it will place them.
dialCtlNbrCfgEntry entry .1.3.6.1.4.1.52.4.1.2.7.4.1.2.1
A single Neighbor. This entry is effectively permanent,
and contains address information describing the neighbor.
The value of dialCtlNbrCfgOriginateAddress must be
specified before a new row in this table can become
ac…
Indexes
dialCtlNbrCfgId dialCtlNbrCfgIndex
Column Syntax OID
dialCtlNbrCfgId mandatory
This object defines a single neighbor. There may
be several entries in this table for one neighbor,
defining different ways of reaching this neighbor.
Thus, there may be several entries in this table
with the same value…
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.1
dialCtlNbrCfgIndex mandatory
The index value which uniquely identifies an entry
in this table.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.2
dialCtlNbrCfgIfIndex mandatory
The ifIndex value of the interface associated with this
neighbor.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.3
dialCtlNbrCfgOriginateAddress mandatory
Call Address at which the neighbor will be called.
Think of this as the set of characters following 'ATDT '
or the 'phone number' included in a D channel call request.
The structure of this information will be switch ty…
DisplayStringr/w
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.4
dialCtlNbrCfgAnswerAddress mandatory
Calling Party Number information element, as for example
passed in an ISDN SETUP message by a PBX or switch,
for incoming calls. This address can be used to identify
the neighbor. If this address is either unknown or id…
DisplayStringr/w
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.5

rmtProfileTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.4.1.3 · 1 row entry · 19 columns
Open in standard view 
The list of neighbors from which this device will accept calls or
to which it will place them.
rmtProfileEntry entry .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1
A single Neighbor. This entry is effectively permanent, and contains
information describing the neighbor.
Indexes
rmtProfileEntryIndex
Column Syntax OID
rmtProfileEntryIndex mandatory
The index value which uniquely identifies an entry
in this table.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.1
rmtProfileEntryName mandatory
ASCII name of the neighbor.
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.2
rmtProfileEntryMakerName mandatory
ASCII name of the manufacturer of the neighbor. In other
words, it is a name by which to uniquely identify the remote
access device to which the profile belongs.
OctetStringr/w .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.3
rmtProfileEntryAction mandatory
Desired action for the neighbor interface
Enumerationr/w
Enumerated Values:
1idle
2connect
3hangup
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.4
rmtProfileEntryState mandatory
Current state of the neighbor interface
Enumeration
Enumerated Values:
1idle
2calling
3ringing
4connected
5answering
6answered
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.5
rmtProfileEntryMaxNeighbor mandatory
The maximum allowable dialCtlNbrCfgIndex. It is the number
of instances of the profile.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.6
rmtProfileEntryBchInUse mandatory
A bit string with bit 1 signifiying B channel 1. A set
bit means that this channel was assigned for current or
last call.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.7
rmtProfileEntryLinkHead mandatory
A zero value signifies it is a primary profile. Otherwise, it is an
instance profile and the value identifies the primary profile from
which it was spawned.
Integer32
Constraints:
range: 0-20
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.8
rmtProfileEntryNextLink mandatory
A non-zero value identifies an instance profile. Whereas, a zero
value either means it is a primary profile or the last instance
of a primary profile.
Integer32
Constraints:
range: 0-20
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.9
rmtProfileEntryMpCapable mandatory
MP option selector. Set to a value of one when MP support is
desired otherwise set to a value of two. The default setting is
disabled. When enabled the attempt is made to negotiate MP support.
Both parties must support…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.10
rmtProfileEntryMpLineUtilization mandatory
Used to set the Line Utilization Threshold (LUT) % to compare
against the linear weighted percentage to determine when
more/less bandwidth is to be added/removed. Linear weighting
is computed (averaged) over the period …
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.11
rmtProfileEntryMpHistoryTime mandatory
Used to set the history time value in seconds for the number of line
utilization reading(s)/sample(s) desired to compute the average
line utilization. It specifies the window size over which to
to compute the average li…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.12
rmtProfileEntryMpMoreBWSamples mandatory
Used to set the number of consecutive line utilization average
computations that must exceed the LUT % value as specified by the
rmtProfileEntryMpLineUtilization object before allowing possible
more bandwidth to be adde…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.13
rmtProfileEntryMpLessBWSamples mandatory
Used to set the number of consecutive line utilization average
computations that must fall below the LUT % value as specified by the
rmtProfileEntryMpLineUtilization object before removing possible
previously added band…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.14
rmtProfileEntryMpMaxCallsAllowed mandatory
Used to set the maxium number of channels an ISDN MP capable
call is allowed.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.15
rmtProfileEntryMpCallsToAdd mandatory
Used to set the number of additional channel(s) (call(s)) to
increment by whenever the need for more bandwidth is determined.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.16
rmtProfileEntryMpCallsToRemove mandatory
Used to set the number of channel(s) (call(s)) to decrement
by whenever the need for possible previously added additional
bandwidth is determined to no longer be needed/desired.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.17
rmtProfileEntryMpAvgPktSize mandatory
Used to set the average packet size by which to determine when
its best to split a packet. This is an attempt to minimize the
amount of buffering necessary at the remote device to maintain
packet sequentiality.
Integer32r/w
Constraints:
range: 1-1500
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.18
rmtProfileEntryMpRmtBwCtrl mandatory
MP remote bandwidth control selector. Set to a one when
bandwidth changes are permitted by either side ie by both
parties otherwise set to a value of two. The default setting
is disabled. That is to say, only the caller…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.19

callHistoryTable

table mandatory
.1.3.6.1.4.1.52.4.1.2.7.4.2.2 · 1 row entry · 14 columns
Open in standard view 
A table containing information about specific
calls to a specific destination.
callHistoryEntry entry .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1
The information regarding a single Connection.
Indexes
callHistoryIndex
Column Syntax OID
callHistorySetupTime mandatory
The value of system up time when the call associated to this
entry was started. This will be useful for an NMS to
retrieve all calls after a specific time. Also, this object
can be useful in finding large delays between…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.1
callHistoryIndex mandatory
Index variable to access the CallHistoryEntry objects
of the callHistoryTable.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.2
callHistoryPeerAddress mandatory
The number this call is connected to. If the number is
not available, then it will have a length of zero.
DisplayString
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.3
callHistoryNeighborId mandatory
This is the Id value of the neighbor table entry
to which this call was made. If a neighbor table entry
for this call does not exist, the value of this object
will be zero.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.4
callHistoryLogicalIfIndex mandatory
This is the ifIndex value of the logical interface through
which this call was made.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.5
callHistoryDisconnectCause mandatory
The encoded network cause value associated with this call.
The value of this object will depend on the interface type
as well as on the protocol and protocol version being
used on this interface. The more common cause v…
Enumeration
Enumerated Values:
1unassignedNumber
2noRouteToDestination
6channelUnacceptable
16normalCallClearing
17userBusy
18noUserResponding
21callRejected
22numberChangedAddress
28invalidNumberFormat
31normalUnspecified
34noChannelAvailable
38networkOutOfOrder
41temporaryFailure
42switchingEquipmentCongestion
43userInfoDiscarded
44requestedChannelNotAvailable
52outgoingCallsBarred
54incomingCallsBarred
58bearerCapabilityNotPresentlyAvail
63serviceNotAvailable
65bearerServiceNotImplemented
66channelTypeNotImplemented
70onlyRestrictedChannelAvailable
79serviceOrOptionNotImplemeted
81invalidCallReferenceValue
82identifiedChannelDoesNotExist
85invalidDigitValueForAddress
88incompatibleDestination
90destinationAddressMissing
91transitNetworkDoesNotExist
95invalidMessageSpecified
96mandatoryIEmissing
97messageTypeNonexistentOrNotImplemented
98messageNotCompatibleWithCallState
99iEnotImplemented
100invalidIEcontents
111protocolError
133callAlreadyActive
134lineDisabled
135badParameter
136timeoutOccured
138noCallActive
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.6
callHistoryConnectTime mandatory
The value of system up time when the call was connected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.7
callHistoryDisconnectTime mandatory
The value of system up time when the call was disconnected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.8
callHistoryCallOrigin mandatory
The call origin.
Enumeration
Enumerated Values:
1originate
2answer
3callback
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.9
callHistoryInfoType mandatory
The information type for this call.
Enumeration
Enumerated Values:
1other
2speech
3unrestrictedDigital
4unrestrictedDigital56
5restrictedDigital
6audio31
7audio7
8video
9packetSwitched
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.10
callHistoryTransmitPackets mandatory
The number of packets which were transmitted while this
call was active.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.11
callHistoryTransmitBytes mandatory
The number of bytes which were transmitted while this
call was active.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.12
callHistoryReceivePackets mandatory
The number of packets which were received while this
call was active.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.13
callHistoryReceiveBytes mandatory
The number of bytes which were received while this
call was active.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.14