rmtProfileEntryMpRmtBwCtrl
CTRON-ISDN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.19
Object
column
mandatory
r/w
Enumeration
MP remote bandwidth control selector. Set to a one when bandwidth changes are permitted by either side ie by both parties otherwise set to a value of two. The default setting is disabled. That is to say, only the caller is permitted to change (control) the bandwidth.
Context
- MIB
- CTRON-ISDN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.19- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- rmtProfileEntry
- Table
- rmtProfileTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rmtProfileEntryIndex mandatory The index value which uniquely identifies an entry
in this table. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.1 |
| rmtProfileEntryMpCapable mandatory MP option selector. Set to a value of one when MP support is
desired otherwise set to a value of two. The default setting is
disabled. When enabled the attempt is made to negotia… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.10 |
| rmtProfileEntryMpLineUtilization mandatory Used to set the Line Utilization Threshold (LUT) % to compare
against the linear weighted percentage to determine when
more/less bandwidth is to be added/removed. Linear weighting… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.11 |
| rmtProfileEntryMpHistoryTime mandatory Used to set the history time value in seconds for the number of line
utilization reading(s)/sample(s) desired to compute the average
line utilization. It specifies the window size… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.12 |
| rmtProfileEntryMpMoreBWSamples mandatory Used to set the number of consecutive line utilization average
computations that must exceed the LUT % value as specified by the
rmtProfileEntryMpLineUtilization object before all… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.13 |
| rmtProfileEntryMpLessBWSamples mandatory Used to set the number of consecutive line utilization average
computations that must fall below the LUT % value as specified by the
rmtProfileEntryMpLineUtilization object before… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.14 |
| rmtProfileEntryMpMaxCallsAllowed mandatory Used to set the maxium number of channels an ISDN MP capable
call is allowed. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.15 |
| rmtProfileEntryMpCallsToAdd mandatory Used to set the number of additional channel(s) (call(s)) to
increment by whenever the need for more bandwidth is determined. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.16 |
| rmtProfileEntryMpCallsToRemove mandatory Used to set the number of channel(s) (call(s)) to decrement
by whenever the need for possible previously added additional
bandwidth is determined to no longer be needed/desired. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.17 |
| rmtProfileEntryMpAvgPktSize mandatory Used to set the average packet size by which to determine when
its best to split a packet. This is an attempt to minimize the
amount of buffering necessary at the remote device to… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.18 |
| rmtProfileEntryName mandatory ASCII name of the neighbor. | column | OctetString | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.2 |
| rmtProfileEntryMakerName mandatory ASCII name of the manufacturer of the neighbor. In other
words, it is a name by which to uniquely identify the remote
access device to which the profile belongs. | column | OctetString | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.3 |
| rmtProfileEntryAction mandatory Desired action for the neighbor interface | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.4 |
| rmtProfileEntryState mandatory Current state of the neighbor interface | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.5 |
| rmtProfileEntryMaxNeighbor mandatory The maximum allowable dialCtlNbrCfgIndex. It is the number
of instances of the profile. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.6 |
| rmtProfileEntryBchInUse mandatory A bit string with bit 1 signifiying B channel 1. A set
bit means that this channel was assigned for current or
last call. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.7 |
| rmtProfileEntryLinkHead mandatory A zero value signifies it is a primary profile. Otherwise, it is an
instance profile and the value identifies the primary profile from
which it was spawned. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.8 |
| rmtProfileEntryNextLink mandatory A non-zero value identifies an instance profile. Whereas, a zero
value either means it is a primary profile or the last instance
of a primary profile. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.9 |