rmtProfileEntryMpCapable
CTRON-ISDN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.10
Object
column
mandatory
r/w
Enumeration
MP option selector. Set to a value of one when MP support is desired otherwise set to a value of two. The default setting is disabled. When enabled the attempt is made to negotiate MP support. Both parties must support MP to be able to successfully negotiate MP.
Context
- MIB
- CTRON-ISDN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- rmtProfileEntry
- Table
- rmtProfileTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rmtProfileEntryIndex mandatory The index value which uniquely identifies an entry
in this table. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.1 |
| rmtProfileEntryMpLineUtilization mandatory Used to set the Line Utilization Threshold (LUT) % to compare
against the linear weighted percentage to determine when
more/less bandwidth is to be added/removed. Linear weighting… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.11 |
| rmtProfileEntryMpHistoryTime mandatory Used to set the history time value in seconds for the number of line
utilization reading(s)/sample(s) desired to compute the average
line utilization. It specifies the window size… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.12 |
| rmtProfileEntryMpMoreBWSamples mandatory Used to set the number of consecutive line utilization average
computations that must exceed the LUT % value as specified by the
rmtProfileEntryMpLineUtilization object before all… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.13 |
| rmtProfileEntryMpLessBWSamples mandatory Used to set the number of consecutive line utilization average
computations that must fall below the LUT % value as specified by the
rmtProfileEntryMpLineUtilization object before… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.14 |
| rmtProfileEntryMpMaxCallsAllowed mandatory Used to set the maxium number of channels an ISDN MP capable
call is allowed. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.15 |
| rmtProfileEntryMpCallsToAdd mandatory Used to set the number of additional channel(s) (call(s)) to
increment by whenever the need for more bandwidth is determined. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.16 |
| rmtProfileEntryMpCallsToRemove mandatory Used to set the number of channel(s) (call(s)) to decrement
by whenever the need for possible previously added additional
bandwidth is determined to no longer be needed/desired. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.17 |
| rmtProfileEntryMpAvgPktSize mandatory Used to set the average packet size by which to determine when
its best to split a packet. This is an attempt to minimize the
amount of buffering necessary at the remote device to… | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.18 |
| rmtProfileEntryMpRmtBwCtrl mandatory MP remote bandwidth control selector. Set to a one when
bandwidth changes are permitted by either side ie by both
parties otherwise set to a value of two. The default setting
is d… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.19 |
| rmtProfileEntryName mandatory ASCII name of the neighbor. | column | OctetString | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.2 |
| rmtProfileEntryMakerName mandatory ASCII name of the manufacturer of the neighbor. In other
words, it is a name by which to uniquely identify the remote
access device to which the profile belongs. | column | OctetString | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.3 |
| rmtProfileEntryAction mandatory Desired action for the neighbor interface | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.4 |
| rmtProfileEntryState mandatory Current state of the neighbor interface | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.5 |
| rmtProfileEntryMaxNeighbor mandatory The maximum allowable dialCtlNbrCfgIndex. It is the number
of instances of the profile. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.6 |
| rmtProfileEntryBchInUse mandatory A bit string with bit 1 signifiying B channel 1. A set
bit means that this channel was assigned for current or
last call. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.7 |
| rmtProfileEntryLinkHead mandatory A zero value signifies it is a primary profile. Otherwise, it is an
instance profile and the value identifies the primary profile from
which it was spawned. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.8 |
| rmtProfileEntryNextLink mandatory A non-zero value identifies an instance profile. Whereas, a zero
value either means it is a primary profile or the last instance
of a primary profile. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.9 |