CM-dot11plus-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
18
Rows
18
Columns
112

cmdot11plusWep128DefaultKeysTable

table deprecated
.1.3.6.1.4.1.1166.1.19.51.1.1.1.2 · 1 row entry · 2 columns
Open in standard view 
Table containing 128-bit WEP parameters.
This table shall contain the four WEP default secret 128-bit key values
corresponding to the four possible values.  The WEP default secret 128-bit 
keys are logically WRITE-ONLY.  Attempts to read the entries in this table 
shall return values of null.  
The default value of each WEP default key shall be null.
          
This MIB object is only valid for products supporting a single SSID
cmdot11plusWep128DefaultKeysEntry entry .1.3.6.1.4.1.1166.1.19.51.1.1.1.2.1
WEP key table entry. Each entry contains a 128-bit WEP key

This MIB object is only valid for products supporting a single SSID
Indexes
cmdot11plusWep128Index
Column Syntax OID
cmdot11plusWep128Index deprecated
Identifies instances of the columnar objects in the ACL table

This MIB object is only valid for products supporting a single SSID
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.1166.1.19.51.1.1.1.2.1.1
cmdot11plusWep128DefaultKeyValue deprecated
A 128-bit WEP default secret key value.

This MIB object is only valid for products supporting a single SSID
OctetStringr/w
Constraints:
range: 13-13
 .1.3.6.1.4.1.1166.1.19.51.1.1.1.2.1.2

cmdot11plusAclTable

table deprecated
.1.3.6.1.4.1.1166.1.19.51.1.1.1.4 · 1 row entry · 3 columns
Open in standard view 
MAC ACL table contains a list of MAC addresses for stations that are allowed to
associate with the access point.
          
This MIB object is only valid for products supporting a single SSID
cmdot11plusAclEntry entry .1.3.6.1.4.1.1166.1.19.51.1.1.1.4.1
MAC ACL table entry. Primary column of the entry is the MAC address.

This MIB object is only valid for products supporting a single SSID
Indexes
cmdot11plusAclIndex
Column Syntax OID
cmdot11plusAclIndex deprecated
Identifies instances of the columnar objects in the ACL table

This MIB object is only valid for products supporting a single SSID
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1166.1.19.51.1.1.1.4.1.1
cmdot11plusAclAddress deprecated
A MAC address of a station that is allowed to associate with the access point.

This MIB object is only valid for products supporting a single SSID
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.1166.1.19.51.1.1.1.4.1.2
cmdot11plusAclRowStatus deprecated
The RowStatus interlock for creation and deletion.

This MIB object is only valid for products supporting a single SSID
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1166.1.19.51.1.1.1.4.1.3

cmdot11BaseTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.2.1 · 1 row entry · 20 columns
Open in standard view 
A table of settings used to configure the primary wi-fi interfaces belonging to multiple wi-fi instances.
cmdot11BaseEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1
An entry describing the configuration of a primary wi-fi interface.

An entry exists in this table for each entry in the ifTable with an
ifType value of ieee80211(71), and which is designated as a primary
w…
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11WifiOperMode
Setting this object to enable(1) enables the Wireless interface. Setting this object to
disable(2) disables the Wireless interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.1
cmdot11WifiCurrentChannel
Reflects the current channel number (802.11g) or
control channel (802.11n) for this interface.

For 802.11g cards, available channels are 1-14.
For 802.11n cards, available channels are 34-216.
…
Unsigned32
Constraints:
range: 0-216
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.2
cmdot11WifiBeaconInterval
Controls and reflects the beacon interval for this interface.
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.3
cmdot11WifiDTIMInterval
Controls and reflects the DTIM interval for this interface.
millisecondsUnsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.4
cmdot11WifiFragThresh
Controls and reflects the fragmentation threshold for this interface.
bytesUnsigned32r/w
Constraints:
range: 256-2346
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.5
cmdot11WifiRTSThresh
Controls and reflects the RTS threshold for this interface.
Unsigned32r/w
Constraints:
range: 0-2347
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.6
cmdot11WifiShortRetryLimit
Controls and reflects the short retry limit for this interface.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.7
cmdot11WifiLongRetryLimit
Controls and reflects the long retry limit for this interface.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.8
cmdot11WifiMulticastRate
Controls the physical layer transmission rate used for Multicast traffic on the
Wireless interface. The defined rates are the theoretical physical link rate.
Actual data rates will be much lower due to PHY and MAC ove…
Enumerationr/w
Enumerated Values:
1rateAuto
2rate1Mbps
3rate2Mbps
4rate5dot5Mbps
5rate6Mbps
6rate9Mbps
7rate11Mbps
8rate12Mbps
9rate18Mbps
10rate24Mbps
11rate36Mbps
12rate48Mbps
13rate54Mbps
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.9
cmdot11WifiOutputPower
Sets the output power relative to the hardware's maximum capability.
Enumerationr/w
Enumerated Values:
25percent25
50percent50
75percent75
100percent100
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.10
cmdot11WifiResetToDefaults
Setting this object to true(1) causes all the wireless settings
including primary and Guest Network settings for a particular wi-fi instance to be reset to factory defaults.
Reading this object always…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.11
cmdot11WifiChannelSetting
Controls and reflects the current channel number (802.11g) or
control channel (802.11n) for this interface.

If set to (0), the AP will be put in auto-channel mode where
it automatically scans for the leas…
Unsigned32r/w
Constraints:
range: 0-216
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.12
cmdot11WifiApsScan
If set to true(1), the Wi-Fi Radio will be configured to scan for APs.
Scan results with a list of neighboring APs will be updated in cmdot11ApsScanResultsTable.
Always returns false(2) when read.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.13
cmdot11WifiObssCoexMode
Controls and reflects the state of the Wi-Fi Radio's OBSS Coexistence on the selected Card.
If set to true(1), the AP will turn on the OBSS Coexistence for that card.
If set to false(2) the AP will disable the OBSS …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.14
cmdot11WifiAcsdScanTimer
Controls and reflects the ACS Scan Timer for this interface.
secondsUnsigned32r/w
Constraints:
range: 0-268435454
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.15
cmdot11WifiWMFEnable
Controls and reflects the state of Wifi Radio's Wireless Multicast Forwarding (WMF).
Set to true(1) to enable the WMF feature.
Set to false(2) to disable the WMF feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.16
cmdot11WifiBSEnable
Controls and reflects the state of Wifi Radio's Band steering capability.
Set to true(1) to enable the Band steering feature.
Set to false(2) to disable the Band steering feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.17
cmdot11WifiATFEnable
Controls and reflects the state of Wifi Radio's Air Time Fairness capability.
Set to true(1) to enable the ATF feature.
Set to false(2) to disable the ATF feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.18
cmdot11WifiTrafficSchedulerEnable
Controls and reflects the state of Wifi Radio's Traffic Scheduling capability.
Set to true(1)to enable the Traffic Scheduler feature.
Set to false(2) to disable the Traffic Scheduler feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.19
cmdot11WifiEbosEnable
Controls and reflects the state of Wifi Radio's Exhausted Buffer Order Scheduling capability.
Set to true(1) to enable the EBOS feature.
Set to false(2) to disable the EBOS feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.20

cmdot11gTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.2.2 · 1 row entry · 3 columns
Open in standard view 
A table of settings used to configure all wi-fi interfaces which are
capable of supporting the ieee 802.11g standard.
cmdot11gEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.2.2.1
An entry describing the configuration of 802.11g specific parameters
for a primary wifi interface.

An entry exists in this table for each entry in the ifTable with an
ifType value of ieee80211(71), which …
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11Wifi54gNetMode
Controls and reflects the behavior of the interface with regards to
which flavor of 802.11g is used.
If set to mode54g11bOnly(0), only 802.11b clients will be accepted.
If set to mode54gAuto(1) the interface will a…
Enumerationr/w
Enumerated Values:
0mode54g11bOnly
1mode54gAuto
2mode54gOnly
4mode54gPerformance
5mode54gLRS
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.2.1.1
cmdot11Wifi54gProtectionEnable
Controls and reflects the state of 54g protection. If set to true(1),
the AP will use RTS/CTS to improve 802.11g performance in mixed
802.11g/802.11b networks. Set to false(2) to maximize 802.11g
throughput under mo…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.2.1.2
cmdot11Wifi54gBasicRateSet
Determines which rates are advertised as BASIC rates in the beacon.
If set to default, the driver defaults for the selected 54gMode will
be used. If set to all, all available rates will be advertised as
BASIC rates reg…
Enumerationr/w
Enumerated Values:
1default
2all
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.2.1.3

cmdot11nTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.2.3 · 1 row entry · 6 columns
Open in standard view 
A table of settings used to configure all wi-fi interfaces which are
capable of supporting the ieee 802.11n standard.
cmdot11nEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.2.3.1
An entry describing the configuration of 802.11n specific parameters
for a primary wifi interface.

An entry exists in this table for each entry in the ifTable with an
ifType value of ieee80211(71), which …
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11WifiNMode
Used to enable/disable 802.11n operation.
'Auto' is used to enable 802.11n operation; the Access Point will detect which
stations are out there and operate in the proper mode.
'Off' is used to disable 802.11n operatio…
Enumerationr/w
Enumerated Values:
1auto
2off
3nOnly
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.3.1.1
cmdot11WifiNPhyRate
Used to specify the 802.11n PHY transmission rate.
'Auto' is used to allow the Access Point to dynamically adapt
to the environment and transmit using the fastest data rate
for the given environmental conditions.
'Leg…
Enumerationr/w
Enumerated Values:
0auto
1legacy
2mcs0
3mcs1
4mcs2
5mcs3
6mcs4
7mcs5
8mcs6
9mcs7
10mcs8
11mcs9
12mcs10
13mcs11
14mcs12
15mcs13
16mcs14
17mcs15
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.3.1.2
cmdot11WifiNBand
Selects the wireless frequency band (2.4 GHz or 5 GHz) the Access Point will operate in.
Note: This MIB object is only valid for products supporting 802.11n.
Enumerationr/w
Enumerated Values:
1band-2-4G
2band-5G
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.3.1.3
cmdot11WifiNBandWidth
Specifies the channel width (20 MHz or 20/40 MHz) to be used by the Access Point.
When 20/40MHz is selected 802.11n clients experience improved throughput
using 40 MHz, while legacy clients(either 802.11a or 802.11b/g) …
Enumerationr/w
Enumerated Values:
0none
1width-20MHz
2width-40MHz
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.3.1.4
cmdot11WifiNSideBand
When bonded channels (40 MHz) are used this object specifies if the
control (primary) channel is in the lower or upper 20 MHz band of the
bonded 40 MHz channel. Returns none(0) when cmdot11WifiNBandWidth != 40MHz.
No…
Enumerationr/w
Enumerated Values:
0none
1upper
2lower
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.3.1.5
cmdot11WifiNProtection
Determines if protection will be turned on or off for 802.11n mode.
When set to auto, the Access Point will enable protection to allow
802.11n clients to co-exist with 802.11a/b/g clients.
Note: This MIB object is only …
Enumerationr/w
Enumerated Values:
1auto
2off
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.3.1.6

cmdot11ApsScanResultsTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.2.4 · 1 row entry · 7 columns
Open in standard view 
A table list of neighboring APs found after cmdot11WifiApsScan
in cmdot11BaseTable is set to true. The table can list up to 32 APs.
cmdot11ApsScanResultsEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.2.4.1
An entry describing neighboring AP information. First element cmdot11ValidEntry
determines if the current entry is valid or not. The information includes
SSID, RSSI, Channel, Mac Address etc.
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11ValidEntry
Determines if the current entry is valid or not.
Enumeration
Enumerated Values:
0invalid
1valid
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.4.1.1
cmdot11NetworkName
Neighboring AP name or SSID.
OctetString .1.3.6.1.4.1.1166.1.19.51.1.5.2.4.1.2
cmdot11SecurityMode
Neighboring AP security mode.
OctetString .1.3.6.1.4.1.1166.1.19.51.1.5.2.4.1.3
cmdot11PhyMode
Neighboring AP PHY mode.
OctetString .1.3.6.1.4.1.1166.1.19.51.1.5.2.4.1.4
cmdot11Rssi
Neighboring AP receive signal strength.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.4.1.5
cmdot11Channel
Neighboring AP operating channel.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.4.1.6
cmdot11MacAddress
Neighboring AP MAC address.
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.4.1.7

cmdot1180211acInterfaceTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.2.5 · 1 row entry · 4 columns
Open in standard view 
A table of settings used to configure all wi-fi interfaces which are
capable of supporting the ieee 802.11ac standard.
cmdot1180211acInterfaceEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.2.5.1
An entry describing the configuration of 802.11ac specific parameters
for a primary wifi interface.

An entry exists in this table for each entry in the ifTable with an
ifType value of ieee80211(71), which…
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11ACBandWidth
Determines which Bandwidth that we will be operating in:
20MHz, 40MHz or 80MHz. Note: This is for N or AC cards only.
Enumerationr/w
Enumerated Values:
1width20MHz
2width40MHz
3width80MHz
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.5.1.1
cmdot11ACChannelSpec
Controls and reflects the current channel specification for this interface.
If set to (0), the AP will be put in auto-channel mode where
it automatically scans for the least-crowded channel.
For 20MHz bandwidth, ch…
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.5.1.2
cmdot11ACTxbfBFRCap
Controls and reflects the BFR Capability on the selected Card.
Set to true(1) to enable the BFR Capability for that card.
Set to false(2) to disable the BFR Capability for that card.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.5.1.3
cmdot11ACTxbfBFECap
Controls and reflects the BFE Capability on the selected Card.
Set to true(1) to enable the BFE Capability for that card.
Set to false(2) to disable the BFE Capability for that card.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.2.5.1.4

cmdot11BssTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14 · 1 row entry · 9 columns
Open in standard view 
A table of entries in an MBSS system.
cmdot11BssEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1
An entry describing the characteristics of an individual BSS. An
entry exists in this table for each entry of type ieee80211 (71) in
the ifTable.
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11BssId
The physical address associated with this service set.
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.1
cmdot11BssEnable
Enables or disables this service set.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.2
cmdot11BssSsid
Controls and reflects the service set identifier for this BSS.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.3
cmdot11BssNetworkBridge obsolete
If set to lan(1), this service set will be authorized as a member of
the local area network. If set to guest(2), this service set will
have access to the wide area internet, but will have restricted access
to the local…
Enumerationr/w
Enumerated Values:
1lan
2guest
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.4
cmdot11BssSecurityMode
Security mode may be chosen from Disable, WEP, WPA-PSK, WPA2-PSK,
WPA-Enterprise, WPA2-Enterprise, RADIUS-WEP, WPA-PSK_WPA2-PSK or
WPA-Enterprise_WPA2-Enterprise. All devices on the network must use
the same security …
Enumerationr/w
Enumerated Values:
0disabled
1wep
2wpaPsk
3wpa2Psk
4wpaEnterprise
5wpa2Enterprise
6radiusWep
7wpaPsk-wpa2Psk
8wpaEnterprise-wpa2Enterprise
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.5
cmdot11BssClosedNetwork
Controls whether the device will operate in closed network mode. If
set to true(1), then the network mode is closed and the SSID will not
be broadcast in beacon packets. If set to false(2), then the network
mode is op…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.6
cmdot11BssAccessMode
Controls what stations will be given access to the device. If set to
allowAny(1), then any station will be allowed to connect. If set
to restrictToList(2), then only stations whose MAC address appears in
the cmdot11Bs…
Enumerationr/w
Enumerated Values:
1allowAny
2allowList
3denyList
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.7
cmdot11BssMaxAssociationsLimit
Configure the maximum number of stations that can associate with
the device.
Unsigned32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.8
cmdot11BssOpmodeCapRequired
Configure operational capability requirement for a STA to associate to the BSS.
Enumerationr/w
Enumerated Values:
0none
1erp
2ht
3vht
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.1.14.1.9

cmdot11BssWepTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.4.2.1 · 1 row entry · 4 columns
Open in standard view 
A table used to configure settings related to the WEP security modes.
cmdot11BssWepEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.1.1
An entry defining the WEP characteristics of an individual service set.
A row exists in this table for each row in the cmdot11BssTable for which
cmdot11BssSecurityMode is set to wep(1) or radiusWep(6).
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11BssWepDefaultKey
Controls and reflects the default key which will be used when 64 or
128 bit encryption is enabled. Indicates the entry from the
cmdot11BssWep64BitKeyTable if cmdot11EncryptionMode is set to wep64(1), or
the entry from…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.1.1.1
cmdot11BssWepEncryptionMode
Selects the WEP encryption method used by this service set.
If set to wep64(1), then 64 bit WEP encryption will be
used with the keys from the cmdot11BssWep64BitKeyTable. If set to
wep128(2), then 128 bit WEP encrypti…
Enumerationr/w
Enumerated Values:
1wep64
2wep128
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.1.1.2
cmdot11BssWepPassPhrase
The passphrase used for WEP security.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.1.1.3
cmdot11BssWepSharedKeyAuthentication
This object controls the use of Shared Key authentication in WEP protocol. If this object
is set to optional(1), Shared Key authentication is optional. If set to required(2),
Shared Key authentication is required for W…
Enumerationr/w
Enumerated Values:
1optional
2required
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.1.1.4

cmdot11BssWep64BitKeyTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.4.2.2 · 1 row entry · 3 columns
Open in standard view 
A table of 40 bit key values used when operating in WEP 64 mode.
cmdot11BssWep64BitKeyEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.2.1
A key to be used by the row in the cmdot11BssTable identified by the
value of ifIndex in the row index.
Indexes
IF-MIBifIndex cmdot11BssWep64BitKeyIndex
Column Syntax OID
cmdot11BssWep64BitKeyIndex
Identifies an instance of a key among those used by the service set
identified by the value of ifIndex in the row index.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.2.1.1
cmdot11BssWep64BitKeyValue
A 40 bit key to be used when the corresponding instance of
cmdot11BssSecurityMode is set to wep(1) and the corresponding instance
of cmdot11BssWepEncryptionMode is set to wep64(1).
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.2.1.2
cmdot11BssWep64BitKeyStatus
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.2.1.3

cmdot11BssWep128BitKeyTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.4.2.3 · 1 row entry · 3 columns
Open in standard view 
A table of 104 bit key values used when operating in WEP 128 mode.
cmdot11BssWep128BitKeyEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.3.1
A key to be used by the row in the cmdot11BssTable identified by the
value of ifIndex in the row index.
Indexes
IF-MIBifIndex cmdot11BssWep128BitKeyIndex
Column Syntax OID
cmdot11BssWep128BitKeyIndex
Identifies an instance of a key among those used by the service set
identified by the value of ifIndex in the row index.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.3.1.1
cmdot11BssWep128BitKeyValue
A 104 bit key to be used when the corresponding instance of
cmdot11BssSecurityMode is set to wep(1) and the corresponding instance
of cmdot11BssWepEncryptionMode is set to wep128(128).
OctetStringr/w
Constraints:
range: 13-13
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.3.1.2
cmdot11BssWep128BitKeyStatus
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.3.1.3

cmdot11BssWpaTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.4.2.4 · 1 row entry · 3 columns
Open in standard view 
A table used to configure settings related to the WPA security modes.
cmdot11BssWpaEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.4.1
An entry defining the WPA characteristics of an individual service set.
A row exists in this table for each row in the cmdot11BssTable for which
cmdot11BssSecurityMode is set to wpaPsk(2), wpa2Psk(3), wpaEnterprise(4), …
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11BssWpaAlgorithm
Controls and reflects the WPA encryption mode used by the service set.
The WPA algorithm for WPA-PSK and WPA-Enterprise security mode is either
tkip(1) or aes(2).

The WPA algorithm for WPA2-PSK and WPA2…
Enumerationr/w
Enumerated Values:
1tkip
2aes
3tkipPlusAes
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.4.1.1
cmdot11BssWpaPreSharedKey
Sets the WPA Pre-Shared Key (PSK) used by this service set. This
value MUST be either a 64 byte hexadecimal number, OR an 8 to 63
character ASCII string.
OctetStringr/w
Constraints:
range: 8-64
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.4.1.2
cmdot11BssWpaGroupRekeyInterval
Sets the WPA Group Rekey Interval for this service set. If set to zero,
periodic rekeying is disabled for this service set.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.4.1.3

cmdot11BssRadiusTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.4.2.5 · 1 row entry · 5 columns
Open in standard view 
A table used to configure settings related to the RADIUS security 
modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP.
cmdot11BssRadiusEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.5.1
An entry defining the RADIUS characteristics of an individual service
set. A row exists in this table for each row in the cmdot11BssTable
for which cmdot11BssSecurityMode is set to wpaEnterprise(4),
wpa2Enterprise(5…
Indexes
IF-MIBifIndex
Column Syntax OID
cmdot11BssRadiusAddressType
The type of internet address used for cmdot11BssRadiusAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.5.1.1
cmdot11BssRadiusAddress
The internet address of the RADIUS server for this service set.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.5.1.2
cmdot11BssRadiusPort
The UDP port used to communicate with the RADIUS server for this
service set.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.5.1.3
cmdot11BssRadiusKey
The RADIUS key.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.5.1.4
cmdot11BssRadiusReAuthInterval
The network re-authentication interval. If set to zero, no
re-authentication will be performed.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.2.5.1.5

cmdot11BssAccessTable

table
.1.3.6.1.4.1.1166.1.19.51.1.5.4.3.1 · 1 row entry · 3 columns
Open in standard view 
A table of MAC addresses which defines the MAC address based access 
restrictions for the system.
cmdot11BssAccessEntry entry .1.3.6.1.4.1.1166.1.19.51.1.5.4.3.1.1
A row in the table which specifies a single MAC address for a given
service set.
Indexes
IF-MIBifIndex cmdot11BssAccessIndex
Column Syntax OID
cmdot11BssAccessIndex
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.3.1.1.1
cmdot11BssAccessStation
A MAC address of a station which will be allowed to connect to the
service set if cmdot11BssAccessMode is set to restrictToList(2), or
forbidden if cmdot11BssAccessMode is set to denyList(3).
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.3.1.1.2
cmdot11BssAccessStatus
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1166.1.19.51.1.5.4.3.1.1.3

cmdot11plusConnectedClientsTable

table
.1.3.6.1.4.1.1166.1.19.51.1.8 · 1 row entry · 9 columns
Open in standard view 
This table contains a list of Wi-Fi connected clients, and associated 
connection information.
cmdot11plusConnectedClientsEntry entry .1.3.6.1.4.1.1166.1.19.51.1.8.1
An entry in the table containing connection information about a connected
Wi-Fi client
Indexes
cmdot11plusClientIndex
Column Syntax OID
cmdot11plusClientIndex
Table Index
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1166.1.19.51.1.8.1.1
cmdot11plusClientIpAddr
The IP Address assigned to the Wi-Fi client.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1166.1.19.51.1.8.1.2
cmdot11plusClientID
The Wi-Fi client's hardware address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.1166.1.19.51.1.8.1.3
cmdot11plusClientHostName
The Host Name of the Wi-Fi client, derived from DHCP option 12.
OctetString .1.3.6.1.4.1.1166.1.19.51.1.8.1.4
cmdot11plusClientAge
Elapsed time in seconds since the last IP packet was received
from or sent to the Wi-Fi client.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1166.1.19.51.1.8.1.5
cmdot11plusClientMode
The connection mode of the Wi-Fi client.
Enumeration
Enumerated Values:
1a
2g
3n
 .1.3.6.1.4.1.1166.1.19.51.1.8.1.6
cmdot11plusClientRssi
The Wi-Fi client's Received Signal Strength in dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1166.1.19.51.1.8.1.7
cmdot11plusClientSpeed
The Wi-Fi client's connected link speed.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1166.1.19.51.1.8.1.8
cmdot11plusClientConnectedSSID
The SSID (Service Set Identifier) to which the Wi-Fi client is connected.
OctetString .1.3.6.1.4.1.1166.1.19.51.1.8.1.9

cmdot11wifiHotspotTable

table
.1.3.6.1.4.1.1166.1.19.51.3.1.2 · 1 row entry · 12 columns
Open in standard view 
A table used to configure settings related to Wi-fi Hotspot.
cmdot11wifiHotspotIfEntry entry .1.3.6.1.4.1.1166.1.19.51.3.1.2.1
An entry defining the Wi-fi hotspot characteristics of an
individual Wi-Fi network interface.
Indexes
cmdot11wifiHotspotIf
Column Syntax OID
cmdot11wifiHotspotInstance
The key for a unique instance of this object.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.1
cmdot11wifiHotspotIf
Wi-fi network interface.
Enumerationr/w
Enumerated Values:
1wifi1-0
2wifi1-1
3wifi1-2
4wifi1-3
5wifi1-4
6wifi1-5
7wifi1-6
8wifi1-7
9wifi2-0
10wifi2-1
11wifi2-2
12wifi2-3
13wifi2-4
14wifi2-5
15wifi2-6
16wifi2-7
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.2
cmdot11wifiHotspotMode
Wi-fi Hotsot mode:
enableBridge - Wi-Fi traffic will be bridged
enableCmdot11l2ogre - Wi-Fi traffic will be sent over GRE tunnel.
GRE Tunnel should be configured and enabled.
Enumerationr/w
Enumerated Values:
1disable
2enableBridge
3enableCmdot11l2ogre
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.3
cmdot11wifiHotspotCpeIdleTimeout
CPE inactivity/idle timeout in seconds which will trigger disconnect.
Value of 0 will disable inactivity tracking.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.4
cmdot11wifiHotspotCpeSessionTimeout
CPE maximum session duration timeout in seconds.
Value of 0 will disable tracking session duration.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.5
cmdot11wifiHotspotRadiusAccAddressType
The type of internet address used for cmdot11wifiHotspotRadiusAccAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.6
cmdot11wifiHotspotRadiusAccAddress
The internet address of the RADIUS Accounting server for this service set.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.7
cmdot11wifiHotspotRadiusAccPort
The UDP port used to communicate with the RADIUS Accounting server.
Default value set to 1813.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.8
cmdot11wifiHotspotRadiusAccKey
The RADIUS Accounting server shared security key.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.9
cmdot11wifiHotspotPacketFilterMask
Bit mask for limiting traffic to certain packet types.
Possible value:
11111111 11111111 11111111 11111111: Allow All traffic
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxx1: Allow IPv4 (0x0800) packets
xxxxxxxx xxxxxxxx xxxxxxxx x…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.10
cmdot11wifiHotspotInsertDhcpOptionsMask
Bit mask for inserting DHCP options in DHCP Discover/Request packet from
connected wifi client device.
Possible value:
0x1: Insert DHCP relay agent option 82.
circuit-id sub-option: AP-MAC-ADDRESS;SSID-NAME;SSID-T…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.11
cmdot11wifiHotspotRowStatus
The RowStatus interlock for the creation and deletion
can be modified at any time while the row is active(1).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1166.1.19.51.3.1.2.1.12

cmdot11l2ogreStatsTable

table
.1.3.6.1.4.1.1166.1.19.51.4.1.11 · 1 row entry · 10 columns
Open in standard view 
This table provides statistical information of GRE tunnel.
cmdot11l2ogreStatsEntry entry .1.3.6.1.4.1.1166.1.19.51.4.1.11.1
This table provides statistical information of GRE tunnel.
Indexes
cmdot11l2ogreStatsIndex
Column Syntax OID
cmdot11l2ogreStatsIndex
Table index
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.1
cmdot11l2ogreStatsBytesSent
Number bytes sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.2
cmdot11l2ogreStatsBytesReceived
Number bytes received.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.3
cmdot11l2ogreStatsPacketsSent
Number packets sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.4
cmdot11l2ogreStatsPacketsReceived
Number packets received.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.5
cmdot11l2ogreStatsDiscardPacketsReceived
Number packets received that were discarded.
Because source network interface is down.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.6
cmdot11l2ogreStatsErrorPacketsReceived
Number packets received that were in error.
Because tunnel packets are not correct type.
Eg. Received IP packet instead of L2 packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.7
cmdot11l2ogreStatsKeepAliveSent
Number keepalive packets sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.8
cmdot11l2ogreStatsKeepAliveReceived
Number keepalive packets received.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.9
cmdot11l2ogreStatsRowStatus
The RowStatus interlock for the creation and deletion
can be modified at any time while the row is active(1).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1166.1.19.51.4.1.11.1.10

cmdot11l2ogreSourceIfTable

table
.1.3.6.1.4.1.1166.1.19.51.4.1.12 · 1 row entry · 6 columns
Open in standard view 
This table contains information specific to network source interface 
whose traffic is mapped into GRE tunnel.
cmdot11l2ogreSourceIfEntry entry .1.3.6.1.4.1.1166.1.19.51.4.1.12.1
List of individual source interface entries mapped into GRE tunnel.
Indexes
cmdot11l2ogreSourceIfInstance
Column Syntax OID
cmdot11l2ogreSourceIfInstance
The key for a unique instance of this object.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.51.4.1.12.1.1
cmdot11l2ogreSourceIf
Source interface whose traffic will be pass through GRE tunnel.
Enumerationr/w
Enumerated Values:
1wifi1-0
2wifi1-1
3wifi1-2
4wifi1-3
5wifi1-4
6wifi1-5
7wifi1-6
8wifi1-7
9wifi2-0
10wifi2-1
11wifi2-2
12wifi2-3
13wifi2-4
14wifi2-5
15wifi2-6
16wifi2-7
 .1.3.6.1.4.1.1166.1.19.51.4.1.12.1.2
cmdot11l2ogreSourceIfEnabled
Enables or disable mapping traffic from network interface into GRE tunnel.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1166.1.19.51.4.1.12.1.3
cmdot11l2ogreSourceIfVlanTag
Add VLAN tag consists of 16bit of Tag Protocol Identifier (TPID)
and 16 bit of Tag Control Identifier (TCI).
Value of 0 will disable adding VLAN tag.
Tag Protocol Identifier (TPID) should set to 0x8100.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1166.1.19.51.4.1.12.1.4
cmdot11l2ogreSourceIfMplsHeader
MPLS Header. Value of 0 will disable adding MPLS Header.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1166.1.19.51.4.1.12.1.5
cmdot11l2ogreSourceIfRowStatus
The RowStatus interlock for the creation and deletion of a table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1166.1.19.51.4.1.12.1.6