cmdot11WifiChannelSetting
CM-dot11plus-MIB ·
.1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.12
Object
column
r/w
Unsigned32
Controls and reflects the current channel number (802.11g) or
control channel (802.11n) for this interface.
If set to (0), the AP will be put in auto-channel mode where
it automatically scans for the least-crowded channel.
For 802.11g cards, available channels are 1-14.
For 802.11n cards, available channels are 34-216.
Channel selection is also subject to restrictions based on the selected
country code.
Context
- MIB
- CM-dot11plus-MIB
- OID
.1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cmdot11BaseEntry
- Table
- cmdot11BaseTable
- Siblings
- 19
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-216
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmdot11WifiOperMode Setting this object to enable(1) enables the Wireless interface. Setting this object to
disable(2) disables the Wireless interface. | column | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.1 |
| cmdot11WifiOutputPower Sets the output power relative to the hardware's maximum capability. | column | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.10 |
| cmdot11WifiResetToDefaults Setting this object to true(1) causes all the wireless settings
including primary and Guest Network settings for a particular wi-fi instance to be reset to factory defaults. … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.11 |
| cmdot11WifiApsScan If set to true(1), the Wi-Fi Radio will be configured to scan for APs.
Scan results with a list of neighboring APs will be updated in cmdot11ApsScanResultsTable.
Always returns f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.13 |
| cmdot11WifiObssCoexMode Controls and reflects the state of the Wi-Fi Radio's OBSS Coexistence on the selected Card.
If set to true(1), the AP will turn on the OBSS Coexistence for that card.
If set to… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.14 |
| cmdot11WifiAcsdScanTimer Controls and reflects the ACS Scan Timer for this interface. | column | seconds Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.15 |
| cmdot11WifiWMFEnable Controls and reflects the state of Wifi Radio's Wireless Multicast Forwarding (WMF).
Set to true(1) to enable the WMF feature.
Set to false(2) to disable the WMF feature. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.16 |
| cmdot11WifiBSEnable Controls and reflects the state of Wifi Radio's Band steering capability.
Set to true(1) to enable the Band steering feature.
Set to false(2) to disable the Band steering featur… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.17 |
| cmdot11WifiATFEnable Controls and reflects the state of Wifi Radio's Air Time Fairness capability.
Set to true(1) to enable the ATF feature.
Set to false(2) to disable the ATF feature. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.18 |
| cmdot11WifiTrafficSchedulerEnable Controls and reflects the state of Wifi Radio's Traffic Scheduling capability.
Set to true(1)to enable the Traffic Scheduler feature.
Set to false(2) to disable the Traffic Sche… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.19 |
| cmdot11WifiCurrentChannel Reflects the current channel number (802.11g) or
control channel (802.11n) for this interface.
For 802.11g cards, available channels are 1-14.
For 802.11n cards, av… | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.2 |
| cmdot11WifiEbosEnable Controls and reflects the state of Wifi Radio's Exhausted Buffer Order Scheduling capability.
Set to true(1) to enable the EBOS feature.
Set to false(2) to disable the EBOS feat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.20 |
| cmdot11WifiBeaconInterval Controls and reflects the beacon interval for this interface. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.3 |
| cmdot11WifiDTIMInterval Controls and reflects the DTIM interval for this interface. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.4 |
| cmdot11WifiFragThresh Controls and reflects the fragmentation threshold for this interface. | column | bytes Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.5 |
| cmdot11WifiRTSThresh Controls and reflects the RTS threshold for this interface. | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.6 |
| cmdot11WifiShortRetryLimit Controls and reflects the short retry limit for this interface. | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.7 |
| cmdot11WifiLongRetryLimit Controls and reflects the long retry limit for this interface. | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.8 |
| cmdot11WifiMulticastRate Controls the physical layer transmission rate used for Multicast traffic on the
Wireless interface. The defined rates are the theoretical physical link rate.
Actual data rates w… | column | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.9 |