cmdot11WifiMulticastRate
CM-dot11plus-MIB ·
.1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.9
Object
column
r/w
Enumeration
Controls the physical layer transmission rate used for Multicast traffic on the Wireless interface. The defined rates are the theoretical physical link rate. Actual data rates will be much lower due to PHY and MAC overhead. If rateAuto is selected, the Wireless driver will select the lowest valid rate, which for 802.11b and 802.11g is 1Mbps. Note: Values above 11Mbps are not valid for 802.11b. If cmdot1154gNetMode is set to mode54g11bOnly and this object is set to a value above 11Mbps, the set will be rejected.
Context
- MIB
- CM-dot11plus-MIB
- OID
.1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cmdot11BaseEntry
- Table
- cmdot11BaseTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | rateAuto |
2 | rate1Mbps |
3 | rate2Mbps |
4 | rate5dot5Mbps |
5 | rate6Mbps |
6 | rate9Mbps |
7 | rate11Mbps |
8 | rate12Mbps |
9 | rate18Mbps |
10 | rate24Mbps |
11 | rate36Mbps |
12 | rate48Mbps |
13 | rate54Mbps |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmdot11WifiOperMode Setting this object to enable(1) enables the Wireless interface. Setting this object to
disable(2) disables the Wireless interface. | column | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.1 |
| cmdot11WifiOutputPower Sets the output power relative to the hardware's maximum capability. | column | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.10 |
| cmdot11WifiResetToDefaults Setting this object to true(1) causes all the wireless settings
including primary and Guest Network settings for a particular wi-fi instance to be reset to factory defaults. … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.11 |
| cmdot11WifiChannelSetting Controls and reflects the current channel number (802.11g) or
control channel (802.11n) for this interface.
If set to (0), the AP will be put in auto-channel mode w… | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.12 |
| cmdot11WifiApsScan If set to true(1), the Wi-Fi Radio will be configured to scan for APs.
Scan results with a list of neighboring APs will be updated in cmdot11ApsScanResultsTable.
Always returns f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.13 |
| cmdot11WifiObssCoexMode Controls and reflects the state of the Wi-Fi Radio's OBSS Coexistence on the selected Card.
If set to true(1), the AP will turn on the OBSS Coexistence for that card.
If set to… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.14 |
| cmdot11WifiAcsdScanTimer Controls and reflects the ACS Scan Timer for this interface. | column | seconds Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.15 |
| cmdot11WifiWMFEnable Controls and reflects the state of Wifi Radio's Wireless Multicast Forwarding (WMF).
Set to true(1) to enable the WMF feature.
Set to false(2) to disable the WMF feature. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.16 |
| cmdot11WifiBSEnable Controls and reflects the state of Wifi Radio's Band steering capability.
Set to true(1) to enable the Band steering feature.
Set to false(2) to disable the Band steering featur… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.17 |
| cmdot11WifiATFEnable Controls and reflects the state of Wifi Radio's Air Time Fairness capability.
Set to true(1) to enable the ATF feature.
Set to false(2) to disable the ATF feature. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.18 |
| cmdot11WifiTrafficSchedulerEnable Controls and reflects the state of Wifi Radio's Traffic Scheduling capability.
Set to true(1)to enable the Traffic Scheduler feature.
Set to false(2) to disable the Traffic Sche… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.19 |
| cmdot11WifiCurrentChannel Reflects the current channel number (802.11g) or
control channel (802.11n) for this interface.
For 802.11g cards, available channels are 1-14.
For 802.11n cards, av… | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.2 |
| cmdot11WifiEbosEnable Controls and reflects the state of Wifi Radio's Exhausted Buffer Order Scheduling capability.
Set to true(1) to enable the EBOS feature.
Set to false(2) to disable the EBOS feat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.20 |
| cmdot11WifiBeaconInterval Controls and reflects the beacon interval for this interface. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.3 |
| cmdot11WifiDTIMInterval Controls and reflects the DTIM interval for this interface. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.4 |
| cmdot11WifiFragThresh Controls and reflects the fragmentation threshold for this interface. | column | bytes Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.5 |
| cmdot11WifiRTSThresh Controls and reflects the RTS threshold for this interface. | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.6 |
| cmdot11WifiShortRetryLimit Controls and reflects the short retry limit for this interface. | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.7 |
| cmdot11WifiLongRetryLimit Controls and reflects the long retry limit for this interface. | column | Unsigned32 | .1.3.6.1.4.1.1166.1.19.51.1.5.2.1.1.8 |