CISCO-WAN-ATM-CONN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
71

cwAtmChanCnfgTable

table
.1.3.6.1.4.1.351.150.1.1.1.1 · 1 row entry · 59 columns
Open in standard view 
This table contains mandatory endpoint configuration
for all SPVC connections.Most of the objects in this
table are applicable to all provisioned endpoints for all
service categories. The objects cwaChanAbrZZZ however,
provide additional configuration information which apply
to ABR endpoints only.
          
Routing parameters 'cwaChanCDV', 'cwaChanCTD',
'cwaChanRemoteCDV', 'cwaChanRemoteCTD' and 
'cwaChanMaxCost' cannot be set
on a slave endpoint(i.e.if 'cwaChanRoutingMastership'
is set to 'false').
cwAtmChanCnfgEntry entry .1.3.6.1.4.1.351.150.1.1.1.1.1
An entry in the cwAtmChanCnfgTable. The each entry
corresponds to a connection endpoint identified
by interface(ifIndex),Virtual Path Identifier(VPI)
and Virtual Channel Identifier(VCI). The ifIndex
is for those entries…
Indexes
IF-MIBifIndex cwaChanVpi cwaChanVci
Column Syntax OID
cwaChanVpi
The VPI value of a VP or VC connection. The cwaChanVpcFlag
serves to distinguish if this is a VP/VC connection
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.351.150.1.1.1.1.1.1
cwaChanVci
The VCI value of VC connection. The cwaChanVpcFlag serves
to distinguish if this is a VP/VC connection. For a VPC,
the VCI is irrelevant and is set to a value of 0
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.150.1.1.1.1.1.2
cwaChanServiceCategory
This object identifies the service type to which
this connection belongs. The service type specified
is one among the ATM forum service types and
implicitly determines the configuration for GCRA.

This Ob…
CiscoAtmServiceCategoryr/w
Textual Convention: CiscoAtmServiceCategory Enumeration
Type Values:
1cbr1
2vbr1RT
3vbr2RT
4vbr3RT
5vbr1nRT
6vbr2nRT
7vbr3nRT
8ubr1
9ubr2
10abr
11cbr2
12cbr3
 .1.3.6.1.4.1.351.150.1.1.1.1.1.3
cwaChanVpcFlag
This object indentifies if the endpoint is a
VP/VC endpoint. For a VPC, this object is set to
true(1); For a VCC, this object is set to false(2).

This Object can be set only during row creation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.4
cwaChanIdentifier
This number represents a RESOURCE at the switch that
has been assigned for this connection (identified
by ifIndex, cwaChanVpi and cwaChanVci). An example of this
resource could be the LCN/GLCN used by the switch. Anothe…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.5
cwaChanUploadCounter
This counter tracks the number of configuration changes
that happen on a specific endpoint (identified by ifIndex,
cwaChanVpi, and cwaChanVci).

The value of this object is derived from
cwChanGlobalTransa…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.6
cwaChanStatsEnable
Limits imposed by software or hardware implementations
could restrict the amount of statistical data that can be
maintained in a physical entity (like a service module card).
Hence there could be a need to restrict stat…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.7
cwaChanCCEnable
This object serves to enable or disable continuity check(CC)
on a connection endpoint. When continuity check is enabled
on an endpoint, the endpoint anticipates OAM CC cells from its
peer endpoint. OAM CC cells are sen…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.8
cwaChanLocalVpi
This object identifies the internal VPI assigned to a local
endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci
and the cwaChanLocalNSAPAddr, form a unique identifier for
the connection endpoint in the network…
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.351.150.1.1.1.1.1.9
cwaChanLocalVci
This object identifies the internal VCI assigned to a local
endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci
and the cwaChanLocalNSAPAddr, form a unique identifier for
the connection endpoint in the network…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.150.1.1.1.1.1.10
cwaChanLocalNSAPAddr
This object identifies the internal NSAP assigned to a local
endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci
and the cwaChanLocalNSAPAddr, form a unique identifier for
the connection endpoint in the networ…
CiscoWanNsapAtmAddress
Textual Convention: CiscoWanNsapAtmAddress OctetString
Type Constraints:
range: 20
 .1.3.6.1.4.1.351.150.1.1.1.1.1.11
cwaChanRemoteVpi
This object identifies the VPI of the peer endpoint. The
cwaChanRemoteVpi, cwaChanRemoteVpi and the
cwaChanRemoteNSAPAddr, identify the peer endpoint in
the networking domain.

If the object 'cwaChanP2M…
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.351.150.1.1.1.1.1.12
cwaChanRemoteVci
This object identifies the VCI of the peer endpoint. The
cwaChanRemoteVpi, cwaChanRemoteVpi and the
cwaChanRemoteNSAPAddr, identify the peer endpoint in
the networking domain.

If the object 'cwaChanP2M…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.150.1.1.1.1.1.13
cwaChanRemoteNSAPAddr
This object identifies the NSAP of the peer endpoint. The
cwaChanRemoteVpi, cwaChanRemoteVpi and the
cwaChanRemoteNSAPAddr, identify the peer endpoint in
the networking domain.

If the object 'cwaChanP2…
CiscoWanNsapAtmAddressr/w
Textual Convention: CiscoWanNsapAtmAddress OctetString
Type Constraints:
range: 20
 .1.3.6.1.4.1.351.150.1.1.1.1.1.14
cwaChanControllerId
This object serves to associate an endpoint with a specific
controller. Usually resource partitioning makes the association
between a controller and a range of vpi-vci. There could be
switches where hard partitioning o…
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.351.150.1.1.1.1.1.15
cwaChanRoutingMastership
This object, if set to true(1) identifies that this endpoint
as the `master' endpoint of the connection. When set to false(2)
this identifies the `slave' endpoint of the connection. The
slave endpoint is the called part…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.16
cwaChanMaxCost
This object is used by the networking entity to select a route
based on administrative weight of possible routes.

Administrative weights of links and nodes contained in a path
are aggregated and compared…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.17
cwaChanReroute
This is used by the administrator to trigger the
re-routing of the connection.

* Rerouting takes effect, when this object is set to true(1).
When set to false(2), no action is taken.

* A ge…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.18
cwaChanFrameDiscard
When set to true(1), enables the frame discard feature
for the connection. This is applicable only to the master
endpoint (cwaChanRoutingMastership is true) and only for
VCC connections.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.19
cwaChanOperStatus
Reflects operational status of an endpoint.
* This object is set to operFail(2), if the connection is
not routed or if the endpoint receives AIS/RDI or if there
is a CC failure.
* If the connection is administrativ…
CiscoWanOperStatus
Textual Convention: CiscoWanOperStatus Enumeration
Type Values:
1operOk
2operFail
3adminDown
 .1.3.6.1.4.1.351.150.1.1.1.1.1.20
cwaChanPCR
Peak cell rate (PCR) for the direction local -> remote
cells per secondUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.21
cwaChanMCR
Minimum cell rate (MCR) for the direction local -> remote
cells per secondUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.22
cwaChanSCR
Sustainable cell rate (SCR) for the direction local -> remote
cells per secondUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.23
cwaChanCDV
Maximum tolerable cell delay variation in the direction
local -> remote.

Setting this parameter to 0xFFFFFF(16777215) indicates to
the switch that this parameter does not have significance
in SPVC call…
microsecondsUnsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.351.150.1.1.1.1.1.24
cwaChanCTD
Maximum tolerable network transfer delay in the
direction local -> remote.

Setting this parameter to 0xFFFF(65535) indicates to the
switch that this parameter does not have significance in
SPVC call se…
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.150.1.1.1.1.1.25
cwaChanMBS
Maximum Burst Size (MBS) used in the direction local -> remote
cellsUnsigned32r/w
Constraints:
range: 0-5000000
 .1.3.6.1.4.1.351.150.1.1.1.1.1.26
cwaChanCDVT
Cell delay variation tolerance(CDVT) used in the direction
local -> remote.

Setting this parameter to 0xFFFFFFFF(4294967295) indicates to
the switch that it may use a default value of CDVT
microsecondsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.27
cwaChanPercentUtil
This factor provides a per connection control
for overbooking bandwidth. This is used in
conjunction with the VSI interface policy while
performing CAC. This is applied for the direction
local -> remote
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.351.150.1.1.1.1.1.28
cwaChanRemotePCR
Peak cell rate (PCR) for the direction remote -> local.

If the object 'cwaChanP2MP' is set to 'true', this object
should not be 'set' and the value
of this object, if any, is not meaningful.
cells per secondUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.29
cwaChanRemoteMCR
Minimum cell rate for the direction remote -> local
cells per secondUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.30
cwaChanRemoteSCR
Sustainable cell rate for the direction remote -> local
cells per secondUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.31
cwaChanRemoteCDV
Maximum tolerable cell delay variation for the direction
remote -> local.
Setting this parameter to 0xFFFFFF(16777215) indicates to
the switch that this parameter does not have significance
in SPVC call setup.
…
microsecondsUnsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.351.150.1.1.1.1.1.32
cwaChanRemoteCTD
Maximum tolerable network transfer delay in the
direction direction remote -> local.

Setting this parameter to 0xFFFF(65535) indicates to the switch
that this parameter does not have significance in SPVC…
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.150.1.1.1.1.1.33
cwaChanRemoteMBS
Maximum Burst Size (MBS) used in the direction remote -> local.
If the object 'cwaChanP2MP' is set to 'true', this object
should not be 'set' and the value
of this object, if any, is not meaningful.
cellsUnsigned32r/w
Constraints:
range: 0-5000000
 .1.3.6.1.4.1.351.150.1.1.1.1.1.34
cwaChanRemoteCDVT deprecated
Cell delay variation tolerance(CDVT) used in the direction
remote -> local.

Setting this parameter to 0xFFFFFFFF(4294967295) indicates
to the switch that it may use a default value of CDVT.
…
cellsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.35
cwaChanRemotePercentUtil
This factor provides a per connection control
for overbooking bandwidth. This is used in
conjunction with the VSI interface policy while
performing CAC. This is applied for the direction
remote -> local.
…
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.351.150.1.1.1.1.1.36
cwaChanAbrICR
Initial cell rate: Rate at which a source should send initially
after an idle period. The value must not be larger than the PCR
cells/secUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.1.1.1.37
cwaChanAbrADTF
ACR Decrease Time Factor. This is the time permitted between
sending RM-cells (Resource Mangement Cells) before the rate is
decreased to ICR (Initial Cell Rate).
10 millisecondsUnsigned32r/w
Constraints:
range: 1-1023
 .1.3.6.1.4.1.351.150.1.1.1.1.1.38
cwaChanAbrRDF
Rate Decrease Factor: Controls the rate decrease which occurs
when backward RM-cells with CI=1 are received. Larger values
lead to faster rate decrease.
This factor is applied at both the local and remote endpoints,
thu…
AbrRateFactorsr/w
Textual Convention: AbrRateFactors Enumeration
Type Values:
1oneOver32768
2oneOver16384
3oneOver8192
4oneOver4096
5oneOver2048
6oneOver1024
7oneOver512
8oneOver256
9oneOver128
10oneOver64
11oneOver32
12oneOver16
13oneOver8
14oneOver4
15oneOver2
16one
 .1.3.6.1.4.1.351.150.1.1.1.1.1.39
cwaChanAbrRIF
Rate Increase Factor: Controls the rate increase which occurs
when a backward RM-cell is received with CI=0 and NI=0. Larger
values lead to faster rate increase
This factor is applied at both the local and remote endpo…
AbrRateFactorsr/w
Textual Convention: AbrRateFactors Enumeration
Type Values:
1oneOver32768
2oneOver16384
3oneOver8192
4oneOver4096
5oneOver2048
6oneOver1024
7oneOver512
8oneOver256
9oneOver128
10oneOver64
11oneOver32
12oneOver16
13oneOver8
14oneOver4
15oneOver2
16one
 .1.3.6.1.4.1.351.150.1.1.1.1.1.40
cwaChanAbrNRM
Maximum number of cells a source may send for each forward
RM-cell
Enumerationr/w
Enumerated Values:
1nrm2
2nrm4
3nrm8
4nrm16
5nrm32
6nrm64
7nrm128
8nrm256
 .1.3.6.1.4.1.351.150.1.1.1.1.1.41
cwaChanAbrTRM
Upper bound on the time between forward RM-cells for an
active source (in milliseconds)
Enumerationr/w
Enumerated Values:
1trm0point78125
2trm1point5625
3trm3point125
4trm6point25
5trm12point5
6trm25
7trm50
8trm100
 .1.3.6.1.4.1.351.150.1.1.1.1.1.42
cwaChanAbrCDF
Cutoff Decrease Factor: Controls the rate decrease associated
with lost or delayed backward RM cells. Larger values result in
faster rate decrease
Enumerationr/w
Enumerated Values:
1cdf0
2cdfOneOver64
3cdfOneOver32
4cdfOneOver16
5cdfOneOver8
6cdfOneOver4
7cdfOneOver2
8cdfOne
 .1.3.6.1.4.1.351.150.1.1.1.1.1.43
cwaChanAbrFRTT
Fixed round trip time: Sum of the fixed propagation delays from
the source to a destination network.
microsecondsUnsigned32r/w
Constraints:
range: 0-16700000
 .1.3.6.1.4.1.351.150.1.1.1.1.1.44
cwaChanAbrTBE
Transient Buffer Exposure. This is a negotiated number of
cells that the network would like to limit the source to
sending during startup periods, before the first RM-cell returns
Unsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.351.150.1.1.1.1.1.45
cwaChanAbrERS deprecated
Configuration of an endpoint for Explicit Rate Stamping.
Refer the Textual convention for possible values
CiscoWanERSConfgr/w
Textual Convention: CiscoWanERSConfg Enumeration
Type Values:
1none
2enableIngress
3enableEgress
4enableBoth
 .1.3.6.1.4.1.351.150.1.1.1.1.1.46
cwaChanAbrVSVDEnable
Abr connections require close loop control to limit the
transmission rate, depending on the network bandwidth. Now
this close loop can be end to end or between intermediate
network segments. When terminating an Abr V…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.47
cwaChanRowStatus
This object is used to create, modify or delete an entry
in the ciscoWanAtmChanTable.

* A row may be created using the 'CreateAndGo' option. When
the row is successfully created, the RowStatus would be
se…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.351.150.1.1.1.1.1.48
cwaChanIntAbrVSVD
This object is used for enabling/disabling VSVD internal
to a segment i.e the closed loop control is in effect between
the two provisioned endpoints of the SPVC.
CiscoWanVSVDConfgr/w
Textual Convention: CiscoWanVSVDConfg Enumeration
Type Values:
1vsvdOff
2vsvdOn
3switchDefault
 .1.3.6.1.4.1.351.150.1.1.1.1.1.49
cwaChanExtAbrVSVD
This object is used for enabling/disabling VSVD external
to the segment which hosts the two endpoints of the SPVC
i.e the closed loop control will be in effect outside the
segment either towards a CPE or towards anot…
CiscoWanVSVDConfgr/w
Textual Convention: CiscoWanVSVDConfg Enumeration
Type Values:
1vsvdOff
2vsvdOn
3switchDefault
 .1.3.6.1.4.1.351.150.1.1.1.1.1.50
cwaChanAisIWCapability deprecated
This object is used for achieving OAM inter-operability
between switches that cannot generate/detect segment AIS
cells. This attribute enables the newer generation of
switches to understand the OAM capability of the …
CiscoWanAisIWr/w
Textual Convention: CiscoWanAisIW Enumeration
Type Values:
1e2eAisCapable
2segAisCapable
 .1.3.6.1.4.1.351.150.1.1.1.1.1.51
cwaChanCLR
Encoded value representing the maximum tolerable cell loss ratio
in the direction local -> remote. The actual CLR value is derived
as the negative logarithm of this value.
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.351.150.1.1.1.1.1.52
cwaChanRemoteCLR
Encoded value representing the maximum tolerable cell loss ratio
in the direction remote -> local. The actual CLR value is derived
as the negative logarithm of this value.

If the object 'cwaChanP2MP'…
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.351.150.1.1.1.1.1.53
cwaChanOamSegEpEnable
This object controls the setting / resetting of the OAM segment
endpoint. When set to OamSegEp (1), the SPVC endpoint would
terminate all segment OAM FM cells and loopback all OAM segment
loopback cells. When set to…
Enumerationr/w
Enumerated Values:
1oamSegEp
2nonOamSegEp
 .1.3.6.1.4.1.351.150.1.1.1.1.1.54
cwaChanSlaveType
This object indicates whether a master endpoint has a persistent
slave or not. A connection with a master and a non-persistent
slave is considered a single-ended SPVC.

This object is only meaningful when …
Enumerationr/w
Enumerated Values:
1persistentSlave
2nonPersistentSlave
 .1.3.6.1.4.1.351.150.1.1.1.1.1.55
cwaChanRoutingPriority
This object is the routing priority of the connection. When
adding the connection, a default routing priority of 8 is used
if this is not specified. This parameter is not allowed to be
set at the slave endpoint(i.e. if …
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.351.150.1.1.1.1.1.56
cwaChanP2MP
This is used by the administrator to configure this master
endpoint to be the root of a point-to-multipoint
connection.

When this variable is set to 'true', this master endpoint
is the root of a point-t…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.57
cwaChanPrefRouteId
This object serves to to associate a preferred
route with a connection.

The value '0' means no preferred route is associated with
this connection.

Usage:
- If the value of this set to 0, …
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.150.1.1.1.1.1.58
cwaChanDirectRoute
This object serves to associate a prefer
route as directed route (correspond to the prefer route
object cwaChanPrefRouteId).

A directed route specifies that the associated preferred
route is the only per…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.1.1.1.1.1.59

cwAtmChanStateTable

table
.1.3.6.1.4.1.351.150.1.1.2.1 · 1 row entry · 5 columns
Open in standard view 
This table contains channel status information for all 
ATM connections configured in cwAtmChanCnfgTable.
cwAtmChanStateEntry entry .1.3.6.1.4.1.351.150.1.1.2.1.1
An entry in cwAtmChanStateTable.
Indexes
IF-MIBifIndex cwaChanVpi cwaChanVci
Column Syntax OID
cwaChanAlarmState
Defines alarms associated with an endpoint. Refer description
in the textual convention.
CiscoWanAlarmState
Textual Convention: CiscoWanAlarmState Enumeration
Type Values:
1ingAisRdi
2egrAisRdi
4conditioned
8interfaceFail
16ccFail
32mismatch
64ingAbitFail
 .1.3.6.1.4.1.351.150.1.1.2.1.1.1
cwaChanEgressXmtState
This is the state of the transmit portion of the endpoint
in the egress direction
CiscoWanXmtState
Textual Convention: CiscoWanXmtState Enumeration
Type Values:
1normal
2sendingAIS
3sendingRDI
 .1.3.6.1.4.1.351.150.1.1.2.1.1.2
cwaChanEgressRcvState
This is the state of the receive portion of the endpoint
in the egress direction
CiscoWanRcvState
Textual Convention: CiscoWanRcvState Enumeration
Type Values:
1normal
2receivingRDI
3receivingAIS
4ccFailure
 .1.3.6.1.4.1.351.150.1.1.2.1.1.3
cwaChanIngressXmtState
This is the state of the transmit portion of the endpoint
in the ingress direction
CiscoWanXmtState
Textual Convention: CiscoWanXmtState Enumeration
Type Values:
1normal
2sendingAIS
3sendingRDI
 .1.3.6.1.4.1.351.150.1.1.2.1.1.4
cwaChanIngressRcvState
This is the state of the receive portion of the endpoint
in the ingress direction
CiscoWanRcvState
Textual Convention: CiscoWanRcvState Enumeration
Type Values:
1normal
2receivingRDI
3receivingAIS
4ccFailure
 .1.3.6.1.4.1.351.150.1.1.2.1.1.5

cwAtmChanTestTable

table
.1.3.6.1.4.1.351.150.1.1.3.1 · 1 row entry · 5 columns
Open in standard view 
This table contains configuration information for performing
connection diagnostics on ATM Connections and to obtain
results after testing
cwAtmChanTestEntry entry .1.3.6.1.4.1.351.150.1.1.3.1.1
An entry in cwAtmChanTestTable for each ATM Connection
endpoints.
Indexes
IF-MIBifIndex cwaChanVpi cwaChanVci
Column Syntax OID
cwaChanTestType
This object configures an endpoint in loopback:

This is a mandatory object.

* To configure a destructive loopback, this object needs to
be set to destructive (2). The direction in which th…
CiscoWanLpbkTypesr/w
Textual Convention: CiscoWanLpbkTypes Enumeration
Type Values:
1noLpbk
2destructive
3nonDestructive
 .1.3.6.1.4.1.351.150.1.1.3.1.1.1
cwaChanTestDir
Specifies the direction in which loopback should be effected:

This is a mandatory object.

* For destructive loopback, this takes values external (1) and
internal (2).
* For non-destructive…
CiscoWanLpbkDirr/w
Textual Convention: CiscoWanLpbkDir Enumeration
Type Values:
1external
2internal
3forward
4reverse
 .1.3.6.1.4.1.351.150.1.1.3.1.1.2
cwaChanTestIterations
Specifies number of loopback cells to inject. This applies to
the non-destructive mode of loopback tests only. Get operation
on this object returns the successful number of loopback
iterations performed on the endpoint.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.351.150.1.1.3.1.1.3
cwaChanTestState
This object reflects the status of the last requested test:
* If a loopback had never been effected on an endpoint,
this object reads noStatus (1).
* If a destructive mode of loopback is configured on an
endpoint, …
CiscoWanTestStatus
Textual Convention: CiscoWanTestStatus Enumeration
Type Values:
1noStatus
2lpbkInProgress
3lpbkSuccess
4lpbkAbort
5lpbkTimeOut
6lpbkInEffect
 .1.3.6.1.4.1.351.150.1.1.3.1.1.4
cwaChanTestRoundTripDelay
This object is applicable only for non-destructive mode of
loopback. It returns the round trip delay measured during
the last non-destructive loopback test
microsecondsUnsigned32
Constraints:
range: 1-100000000
 .1.3.6.1.4.1.351.150.1.1.3.1.1.5

cwGlobalChanDataTable

table
.1.3.6.1.4.1.351.150.1.1.5.1 · 1 row entry · 2 columns
Open in standard view 
This table contains objects that are required for
configuration upload. The configuration upload
is a mechanism where the configuration(physical or
logical information)of a switch is created in
a file and that file is uploaded by the NMS application
using file transfer method(for example FTP).
cwGlobalChanDataEntry entry .1.3.6.1.4.1.351.150.1.1.5.1.1
Entry containing generic information that apply to
all provisined connections(ATM/Frame Relay).
Indexes
cwSlotIndex
Column Syntax OID
cwSlotIndex
This object's value generally corresponds to the
Slot number where the module resides. However,
System wide uniqueness is the only true requirement.
Unsigned32
Constraints:
range: 1-429496729
 .1.3.6.1.4.1.351.150.1.1.5.1.1.1
cwChanGlobalTransactionId
This reflects the transaction Identifier of the last
successful connection configuration on the slot
(represented by cwSlotIndex).

The value of this object is incremented every time a
connection(ATM/Fra…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.1.1.5.1.1.2