cwaChanTestType
CISCO-WAN-ATM-CONN-MIB ·
.1.3.6.1.4.1.351.150.1.1.3.1.1.1
Object
column
r/w
CiscoWanLpbkTypes
This object configures an endpoint in loopback:
This is a mandatory object.
* To configure a destructive loopback, this object needs to
be set to destructive (2). The direction in which this
destructive loopback needs to be effected, should be
specified using the cwaChanTestDir object. To de-configure
destructive loopback, this object needs to be set to
noLpbk(1).
* To configure a non-destructive loopback, this object needs
to be set to nonDestructive(3). The direction in which this
non-destructive loopback needs to be effected, should be
specified using the cwaChanTestDir object. Non-destructive
loopback gets de-configured automatically at the switch after
a certain timeout. However, if there is a need to abort
a non-destructive loopback, a set operation on this object
should be performed with a value noLpbk (1).
* Attempting to set a channel in loopback, when one is already
in progress results in a failure of the set operation (with
appropriate error code)
Context
- MIB
- CISCO-WAN-ATM-CONN-MIB
- OID
.1.3.6.1.4.1.351.150.1.1.3.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cwAtmChanTestEntry
- Table
- cwAtmChanTestTable
- Siblings
- 4
Syntax
CiscoWanLpbkTypes
- Source
- CiscoWanLpbkTypes
- Base type
Enumeration
Values & Constraints
Type Values
1 | noLpbk |
2 | destructive |
3 | nonDestructive |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwaChanTestDir Specifies the direction in which loopback should be effected:
This is a mandatory object.
* For destructive loopback, this takes values external (1) … | column | CiscoWanLpbkDir | .1.3.6.1.4.1.351.150.1.1.3.1.1.2 |
| cwaChanTestIterations Specifies number of loopback cells to inject. This applies to
the non-destructive mode of loopback tests only. Get operation
on this object returns the successful number of loopba… | column | Unsigned32 | .1.3.6.1.4.1.351.150.1.1.3.1.1.3 |
| cwaChanTestState This object reflects the status of the last requested test:
* If a loopback had never been effected on an endpoint,
this object reads noStatus (1).
* If a destructive mode of lo… | column | CiscoWanTestStatus | .1.3.6.1.4.1.351.150.1.1.3.1.1.4 |
| cwaChanTestRoundTripDelay This object is applicable only for non-destructive mode of
loopback. It returns the round trip delay measured during
the last non-destructive loopback test | column | microseconds Unsigned32 | .1.3.6.1.4.1.351.150.1.1.3.1.1.5 |