CISCO-WAN-AAL2-PROFILES-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
8

aal2ProfilesGrpTable

table
.1.3.6.1.4.1.351.150.17.1.1.1 · 1 row entry · 8 columns
Open in standard view 
This table contains configuration information about
various profiles elements (packetization period, voice
activity detection, voice codec, preference and voice 
band data codec) used in switched AAL2 PVC(Permanent
Virtual Circuit) voice calls.
aal2ProfilesGrpEntry entry .1.3.6.1.4.1.351.150.17.1.1.1.1
An entry in the vismAal2ProfilesGrpTable.

All the entries in this table are implicitly created
when the card comes up.
Indexes
aal2ProfileType aal2ProfileNumber
Column Syntax OID
aal2ProfileType
This object serves as the first index into this table.
Only the following combination of aal2ProfileType and
aal2ProfileNumber will be found in the table.
first entry containing itu 1
second containi…
Enumeration
Enumerated Values:
1itu
3custom
 .1.3.6.1.4.1.351.150.17.1.1.1.1.1
aal2ProfileNumber
This object serves as the second index into this table.

The pre-defined ITU aal2ProfileNumber are specify in
ITU-T I.366.2 standard.

'one' - G.711u/G.711a(No SID - Silence insertion
…
Enumeration
Enumerated Values:
1one
2two
3three
7seven
8eight
12twelve
100oneHundred
101oneHundredOne
110oneHundredTen
200twoHundred
201twoHundredOne
210twoHundredTen
 .1.3.6.1.4.1.351.150.17.1.1.1.1.2
aal2ProfilePreference
This object is used to configure the preference of one
profile over another. A profile with a preference of
zero (0) means that this profile element will not be
used. A non-zero value with a lower number has a
higher pr…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.150.17.1.1.1.1.3
aal2ProfileVoiceCodec
This object determines the codecs to be used in this profile.
Validation will be done before setting this object based
on the current template used in the card.

The default value of this object depends up…
Enumerationr/w
Enumerated Values:
1g711u
2g711a
3g726r32000
4g729a
5g729ab
6clearChannel
7g726r16000
8g726r24000
9g726r40000
11g723h
12g723ah
13g723l
14g723al
15lossless
 .1.3.6.1.4.1.351.150.17.1.1.1.1.4
aal2ProfileVoicePktPeriod
This object is used to configure the packetization period in
millisecs for a given codec.

The default value of this object depends upon the profile
for itu 1 = 5 (Applicable value is only 5)
i…
milli secondsEnumerationr/w
Enumerated Values:
5five
10ten
20twenty
30thirty
40fourty
 .1.3.6.1.4.1.351.150.17.1.1.1.1.5
aal2ProfileVoiceVAD
This object defines whether or not the VAD (Voice Activity
Detection) has to be applied or not when the current
profile is chosen. Upon detection of silence based on the
configuration in this object either generic SID p…
Enumerationr/w
Enumerated Values:
1off
2on
3sidGenric
4sid729
5sid723
 .1.3.6.1.4.1.351.150.17.1.1.1.1.6
aal2ProfileVBDCodec
This object determines the voice band data (VBD)
codecs to be used when upspeed happens.

The default value of this object depends upon the profile
for itu 1 G.711u/G.711a based on T1/E1 card type
…
Enumerationr/w
Enumerated Values:
1g711u
2g711a
3g726r32000
6clearChannel
7g726r16000
8g726r24000
9g726r40000
11g723h
13g723l
15lossless
 .1.3.6.1.4.1.351.150.17.1.1.1.1.7
aal2ProfileVBDPktPeriod
This object is used to configure the packetization period in
millisecs for a given VBD codec.

The default value of this object depends on the profile
for itu 1 = 5
itu 2 = 5
itu 3 =…
milli secondsEnumerationr/w
Enumerated Values:
5five
10ten
30thirty
 .1.3.6.1.4.1.351.150.17.1.1.1.1.8