aal2ProfileVoiceVAD
CISCO-WAN-AAL2-PROFILES-MIB ·
.1.3.6.1.4.1.351.150.17.1.1.1.1.6
Object
column
r/w
Enumeration
This object defines whether or not the VAD (Voice Activity
Detection) has to be applied or not when the current
profile is chosen. Upon detection of silence based on the
configuration in this object either generic SID packet as
specified in I.366.2 standards or SID 729 packet will be
sent to the other end.
The default value of this object depends on the profile:
itu 1 = on - silence suppression enabled with no SID
itu 2 = sidGeneric
itu 3 = sidGeneric
itu 7 = sid729
itu 8 = sid729
itu 12 = sid723
custom 100 = sidGeneric
custom 101 = sid729
custom 110 = sid729
custom 200 = off - silence suppression disabled with no SID.
custom 201 = off - silence suppression disabled with no SID.
custom 210 = off - silence suppression disabled with no SID.
Context
- MIB
- CISCO-WAN-AAL2-PROFILES-MIB
- OID
.1.3.6.1.4.1.351.150.17.1.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aal2ProfilesGrpEntry
- Table
- aal2ProfilesGrpTable
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | on |
3 | sidGenric |
4 | sid729 |
5 | sid723 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aal2ProfileType This object serves as the first index into this table.
Only the following combination of aal2ProfileType and
aal2ProfileNumber will be found in the table.
first entry con… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.1 |
| aal2ProfileNumber This object serves as the second index into this table.
The pre-defined ITU aal2ProfileNumber are specify in
ITU-T I.366.2 standard.
'one' - G.711u… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.2 |
| aal2ProfilePreference This object is used to configure the preference of one
profile over another. A profile with a preference of
zero (0) means that this profile element will not be
used. A non-zero v… | column | Integer32 | .1.3.6.1.4.1.351.150.17.1.1.1.1.3 |
| aal2ProfileVoiceCodec This object determines the codecs to be used in this profile.
Validation will be done before setting this object based
on the current template used in the card.
The… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.4 |
| aal2ProfileVoicePktPeriod This object is used to configure the packetization period in
millisecs for a given codec.
The default value of this object depends upon the profile
for itu 1 … | column | milli seconds Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.5 |
| aal2ProfileVBDCodec This object determines the voice band data (VBD)
codecs to be used when upspeed happens.
The default value of this object depends upon the profile
for itu 1 … | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.7 |
| aal2ProfileVBDPktPeriod This object is used to configure the packetization period in
millisecs for a given VBD codec.
The default value of this object depends on the profile
for itu 1 … | column | milli seconds Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.8 |