aal2ProfilePreference
CISCO-WAN-AAL2-PROFILES-MIB ·
.1.3.6.1.4.1.351.150.17.1.1.1.1.3
Object
column
r/w
Integer32
This object is used to configure the preference of one
profile over another. A profile with a preference of
zero (0) means that this profile element will not be
used. A non-zero value with a lower number has a
higher preference. The range of writable values is
limited to the number of profiles, which means the
number of rows in this table.
If two or more entries has the same preference number then
the first entry in the table will be used.
The default preference for each profile will be as
follows :
itu 3 = 1
itu 7 = 2
itu 2 = 3
itu 1 = 4
itu 8 = 5
custom 100 = 6
custom 101 = 7
custom 110 = 8
custom 200 = 9
itu 12 = 10
custom 201 = 11
custom 210 = 12
Context
- MIB
- CISCO-WAN-AAL2-PROFILES-MIB
- OID
.1.3.6.1.4.1.351.150.17.1.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aal2ProfilesGrpEntry
- Table
- aal2ProfilesGrpTable
- Siblings
- 7
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aal2ProfileType This object serves as the first index into this table.
Only the following combination of aal2ProfileType and
aal2ProfileNumber will be found in the table.
first entry con… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.1 |
| aal2ProfileNumber This object serves as the second index into this table.
The pre-defined ITU aal2ProfileNumber are specify in
ITU-T I.366.2 standard.
'one' - G.711u… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.2 |
| aal2ProfileVoiceCodec This object determines the codecs to be used in this profile.
Validation will be done before setting this object based
on the current template used in the card.
The… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.4 |
| aal2ProfileVoicePktPeriod This object is used to configure the packetization period in
millisecs for a given codec.
The default value of this object depends upon the profile
for itu 1 … | column | milli seconds Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.5 |
| aal2ProfileVoiceVAD This object defines whether or not the VAD (Voice Activity
Detection) has to be applied or not when the current
profile is chosen. Upon detection of silence based on the
configura… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.6 |
| aal2ProfileVBDCodec This object determines the voice band data (VBD)
codecs to be used when upspeed happens.
The default value of this object depends upon the profile
for itu 1 … | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.7 |
| aal2ProfileVBDPktPeriod This object is used to configure the packetization period in
millisecs for a given VBD codec.
The default value of this object depends on the profile
for itu 1 … | column | milli seconds Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.8 |