aal2ProfileVoicePktPeriod
CISCO-WAN-AAL2-PROFILES-MIB ·
.1.3.6.1.4.1.351.150.17.1.1.1.1.5
Object
column
r/w
milli seconds Enumeration
This object is used to configure the packetization period in
millisecs for a given codec.
The default value of this object depends upon the profile
for itu 1 = 5 (Applicable value is only 5)
itu 2 = 5 (Applicable value is only 5)
itu 3 = 5 (Applicable value is only 5)
itu 7 = 10 (Applicable values are 5 & 10)
itu 8 = 10 (Applicable values are 5 & 10)
itu 12 = 30 (Applicable value is only 30)
custom 100 = 10 (Applicable values are 5 & 10)
custom 101 = 10 (Applicable values are 5 & 10)
custom 110 = 30 (Applicable values are 5,10 & 30)
custom 200 = 5 (Applicable value is only 5)
custom 201 = 5 (Applicable value is only 5)
custom 210 = 20 (Applicable value are only 5, 10 & 20)
Context
- MIB
- CISCO-WAN-AAL2-PROFILES-MIB
- OID
.1.3.6.1.4.1.351.150.17.1.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milli seconds
- Parent
- aal2ProfilesGrpEntry
- Table
- aal2ProfilesGrpTable
- Siblings
- 7
Syntax
milli seconds Enumeration
Values & Constraints
Enumerated Values
5 | five |
10 | ten |
20 | twenty |
30 | thirty |
40 | fourty |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aal2ProfileType This object serves as the first index into this table.
Only the following combination of aal2ProfileType and
aal2ProfileNumber will be found in the table.
first entry con… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.1 |
| aal2ProfileNumber This object serves as the second index into this table.
The pre-defined ITU aal2ProfileNumber are specify in
ITU-T I.366.2 standard.
'one' - G.711u… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.2 |
| aal2ProfilePreference This object is used to configure the preference of one
profile over another. A profile with a preference of
zero (0) means that this profile element will not be
used. A non-zero v… | column | Integer32 | .1.3.6.1.4.1.351.150.17.1.1.1.1.3 |
| aal2ProfileVoiceCodec This object determines the codecs to be used in this profile.
Validation will be done before setting this object based
on the current template used in the card.
The… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.4 |
| aal2ProfileVoiceVAD This object defines whether or not the VAD (Voice Activity
Detection) has to be applied or not when the current
profile is chosen. Upon detection of silence based on the
configura… | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.6 |
| aal2ProfileVBDCodec This object determines the voice band data (VBD)
codecs to be used when upspeed happens.
The default value of this object depends upon the profile
for itu 1 … | column | Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.7 |
| aal2ProfileVBDPktPeriod This object is used to configure the packetization period in
millisecs for a given VBD codec.
The default value of this object depends on the profile
for itu 1 … | column | milli seconds Enumeration | .1.3.6.1.4.1.351.150.17.1.1.1.1.8 |