CISCO-VOICE-ATM-DIAL-CONTROL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
33

cvAtmCallHistoryTable

table
.1.3.6.1.4.1.9.10.35.1.1.1 · 1 row entry · 10 columns
Open in standard view 
This table is the ATM extension to the call history
table of IETF Dial Control MIB. It contains ATM call
leg information about specific voice over ATM call.
cvAtmCallHistoryEntry entry .1.3.6.1.4.1.9.10.35.1.1.1.1
The information regarding a single ATM call leg.
An entry of this table is created when its associated call
history entry in the IETF Dial Control MIB is created and
the call history entry contains information for the c…
Indexes
CISCO-DIAL-CONTROL-MIBcCallHistoryIndex
Column Syntax OID
cvAtmCallHistoryConnectionId
The global call identifier for the ATM call.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid
Textual Convention: CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid OctetString
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.9.10.35.1.1.1.1.1
cvAtmCallHistoryVpi
The VPI used for this ATM connection.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.10.35.1.1.1.1.2
cvAtmCallHistoryVci
The VCI used for this ATM connection.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.35.1.1.1.1.3
cvAtmCallHistoryLowerIfName
The ifName of the ATM interface associated with this
call.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.35.1.1.1.1.4
cvAtmCallHistorySessionTarget
The object indicates the session target of the peer that
was used for the voice over ATM call. A zero length string
indicates that the value is unavailable.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.35.1.1.1.1.5
cvAtmCallHistorySubchannelID
The subchannel used for this ATM connection.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.10.35.1.1.1.1.6
cvAtmCallHistorySessionProtocol
Indicates the session protocol used on this call.
CvAtmSessionProtocol
Textual Convention: CvAtmSessionProtocol Enumeration
Type Values:
1other
2ciscoSwitched
3aal2Trunk
 .1.3.6.1.4.1.9.10.35.1.1.1.1.7
cvAtmCallHistoryCalledNumber
Indicates the called party number for trunk connection
calls. A zero length string indicates that this data is
unavailable.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.35.1.1.1.1.8
cvAtmCallHistoryDtmfRelay
Indicates if Dtmf Relay was enabled for the call.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.35.1.1.1.1.9
cvAtmCallHistoryUseSeqNumbers
Indicates if Sequence Numbers were used on the voice
data packets.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.35.1.1.1.1.10

cvAtmCallActiveTable

table
.1.3.6.1.4.1.9.10.35.1.2.1 · 1 row entry · 10 columns
Open in standard view 
This table is the ATM extension to the active call
table of IETF Dial Control MIB. It contains ATM call
leg information about specific voice over ATM call.
cvAtmCallActiveEntry entry .1.3.6.1.4.1.9.10.35.1.2.1.1
The information regarding a single ATM call leg.
An entry of this table is created when its associated call
active entry in the IETF Dial Control MIB is created. The
call active entry contains information for the call
e…
Indexes
DIAL-CONTROL-MIBcallActiveSetupTime DIAL-CONTROL-MIBcallActiveIndex
Column Syntax OID
cvAtmCallActiveConnectionId
The global call identifier for the ATM call.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid
Textual Convention: CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid OctetString
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.9.10.35.1.2.1.1.1
cvAtmCallActiveVpi
The VPI used for this ATM connection.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.10.35.1.2.1.1.2
cvAtmCallActiveVci
The VCI used for this ATM connection.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.35.1.2.1.1.3
cvAtmCallActiveLowerIfName
The ifName of the ATM interface associated with this
call.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.35.1.2.1.1.4
cvAtmCallActiveSessionTarget
The object indicates the session target of the peer
that is used for the voice over ATM call. A null string
indicates that the value is unavailable.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.35.1.2.1.1.5
cvAtmCallActiveSubchannelID
The subchannel used for this ATM connection.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.10.35.1.2.1.1.6
cvAtmCallActiveSessionProtocol
Indicates the session protocol being used on this call.
CvAtmSessionProtocol
Textual Convention: CvAtmSessionProtocol Enumeration
Type Values:
1other
2ciscoSwitched
3aal2Trunk
 .1.3.6.1.4.1.9.10.35.1.2.1.1.7
cvAtmCallActiveCalledNumber
Indicates the called party number for trunk connection
calls. A null string indicates that this data is
unavailable.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.35.1.2.1.1.8
cvAtmCallActiveDtmfRelay
Indicates if Dtmf Relay is enabled for the call.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.35.1.2.1.1.9
cvAtmCallActiveUseSeqNumbers
Indicates if Sequence Numbers are used on the voice data
packets.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.35.1.2.1.1.10

cvAtmPeerCfgTable

table
.1.3.6.1.4.1.9.10.35.1.3.1 · 1 row entry · 13 columns
Open in standard view 
The table contains the Voice over ATM (ATM) peer specific
information that is required to accept or place voice calls
via the ATM backbone with the session protocol specified
in cvAtmPeerCfgSessionProtocol.
cvAtmPeerCfgEntry entry .1.3.6.1.4.1.9.10.35.1.3.1.1
A single ATM specific Peer. One entry per ATM
encapsulation. The entry is created when its associated
'voiceOverATM(152)' encapsulation ifEntry is created.
This entry is deleted when its associated ifEntry
is deleted.
Indexes
IF-MIBifIndex
Column Syntax OID
cvAtmPeerCfgSessionProtocol
The object specifies the session protocol to be used
for Internet call between local and remote router via
ATM backbone.
CvAtmSessionProtocolr/w
Textual Convention: CvAtmSessionProtocol Enumeration
Type Values:
1other
2ciscoSwitched
3aal2Trunk
 .1.3.6.1.4.1.9.10.35.1.3.1.1.1
cvAtmPeerCfgInterfaceName
The object specifies the ifName on which the call will go
out.
A zero length string indicates that no interface has been
assigned.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.35.1.3.1.1.2
cvAtmPeerCfgVpi
The VPI used for this ATM connection.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.10.35.1.3.1.1.3
cvAtmPeerCfgVci
The VCI used for this ATM connection.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.35.1.3.1.1.4
cvAtmPeerCfgVcName
The VC Name used for this ATM connection.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.35.1.3.1.1.5
cvAtmPeerCfgCoderRate
This object specifies the default voice coder rate of
speech for the ATM peer.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRater/w
Textual Convention: CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate Enumeration
Type Values:
1g729r8000
2g729Ar8000
3g726r16000
4g726r24000
5g726r32000
6g711ulawr64000
7g711Alawr64000
8g728r16000
9g723r6300
10g723r5300
11gsmr13200
12g729Br8000
13g729ABr8000
14g723Ar6300
15g723Ar5300
16g729IETFr8000
17gsmeEr12200
18clearChannel
19g726r40000
20llcc
21gsmAmrNb
22iLBC
23iLBCr15200
24iLBCr13330
25g722r4800
26g722r5600
27g722r6400
28iSAC
29aaclc
30aacld
 .1.3.6.1.4.1.9.10.35.1.3.1.1.6
cvAtmPeerCfgCodecBytes
This object specifies the payload size for the voice
packets to be transmitted during the call.
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.9.10.35.1.3.1.1.7
cvAtmPeerCfgFaxRate
This object specifies the default transmit rate of FAX
for the ATM peer. If the value of this object is 'none',
then the Fax relay feature is disabled; otherwise the
Fax relay feature is enabled.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRater/w
Textual Convention: CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRate Enumeration
Type Values:
1none
2voiceRate
3fax2400
4fax4800
5fax7200
6fax9600
7fax14400
8fax12000
 .1.3.6.1.4.1.9.10.35.1.3.1.1.8
cvAtmPeerCfgFaxBytes
This object specifies the payload size for the fax
packets to be transmitted during the call.
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.9.10.35.1.3.1.1.9
cvAtmPeerCfgInBandSignaling
This object specifies the type of in-band signaling
used between the two end points of the call and is used
by the router to determine how to interpret the ABCD
signaling bits sent as part of the voice payload data.
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcInBandSignalingr/w
Textual Convention: CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcInBandSignaling Enumeration
Type Values:
1cas
2none
3cept
4transparent
5gr303
 .1.3.6.1.4.1.9.10.35.1.3.1.1.10
cvAtmPeerCfgVADEnable
This object specifies whether or not VAD (Voice Activity
Detection) is enabled. If the object value is 'false',
then the voice data is continuously transmitted to
ATM backbone.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.35.1.3.1.1.11
cvAtmPeerCfgUseSeqNumbers
This object specifies whether or not Sequence Numbers are
generated on voice packets.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.35.1.3.1.1.12
cvAtmPeerCfgDtmfRelay
This object specifies whether or not Dtmf Relay is enabled.
If it is then dtmf digits are transported as FRF11 Annex
C packets, instead of being encoded as speech.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.35.1.3.1.1.13