cvAtmPeerCfgInBandSignaling
CISCO-VOICE-ATM-DIAL-CONTROL-MIB ·
.1.3.6.1.4.1.9.10.35.1.3.1.1.10
Object
This object specifies the type of in-band signaling used between the two end points of the call and is used by the router to determine how to interpret the ABCD signaling bits sent as part of the voice payload data.
Context
- MIB
- CISCO-VOICE-ATM-DIAL-CONTROL-MIB
- OID
.1.3.6.1.4.1.9.10.35.1.3.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cvAtmPeerCfgEntry
- Table
- cvAtmPeerCfgTable
- Siblings
- 12
Syntax
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcInBandSignaling
- Source
- CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcInBandSignaling
- Base type
Enumeration
Values & Constraints
Type Values
1 | cas |
2 | none |
3 | cept |
4 | transparent |
5 | gr303 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cvAtmPeerCfgSessionProtocol The object specifies the session protocol to be used
for Internet call between local and remote router via
ATM backbone. | column | CvAtmSessionProtocol | .1.3.6.1.4.1.9.10.35.1.3.1.1.1 |
| cvAtmPeerCfgVADEnable This object specifies whether or not VAD (Voice Activity
Detection) is enabled. If the object value is 'false',
then the voice data is continuously transmitted to
ATM backbone. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.11 |
| cvAtmPeerCfgUseSeqNumbers This object specifies whether or not Sequence Numbers are
generated on voice packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.12 |
| cvAtmPeerCfgDtmfRelay This object specifies whether or not Dtmf Relay is enabled.
If it is then dtmf digits are transported as FRF11 Annex
C packets, instead of being encoded as speech. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.13 |
| cvAtmPeerCfgInterfaceName The object specifies the ifName on which the call will go
out.
A zero length string indicates that no interface has been
assigned. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.10.35.1.3.1.1.2 |
| cvAtmPeerCfgVpi The VPI used for this ATM connection. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.3 |
| cvAtmPeerCfgVci The VCI used for this ATM connection. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.4 |
| cvAtmPeerCfgVcName The VC Name used for this ATM connection. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.10.35.1.3.1.1.5 |
| cvAtmPeerCfgCoderRate This object specifies the default voice coder rate of
speech for the ATM peer. | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate | .1.3.6.1.4.1.9.10.35.1.3.1.1.6 |
| cvAtmPeerCfgCodecBytes This object specifies the payload size for the voice
packets to be transmitted during the call. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.7 |
| cvAtmPeerCfgFaxRate This object specifies the default transmit rate of FAX
for the ATM peer. If the value of this object is 'none',
then the Fax relay feature is disabled; otherwise the
Fax relay fea… | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRate | .1.3.6.1.4.1.9.10.35.1.3.1.1.8 |
| cvAtmPeerCfgFaxBytes This object specifies the payload size for the fax
packets to be transmitted during the call. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.9 |