cvAtmPeerCfgVcName
CISCO-VOICE-ATM-DIAL-CONTROL-MIB ·
.1.3.6.1.4.1.9.10.35.1.3.1.1.5
Object
The VC Name used for this ATM connection.
Context
- MIB
- CISCO-VOICE-ATM-DIAL-CONTROL-MIB
- OID
.1.3.6.1.4.1.9.10.35.1.3.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cvAtmPeerCfgEntry
- Table
- cvAtmPeerCfgTable
- Siblings
- 12
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cvAtmPeerCfgSessionProtocol The object specifies the session protocol to be used
for Internet call between local and remote router via
ATM backbone. | column | CvAtmSessionProtocol | .1.3.6.1.4.1.9.10.35.1.3.1.1.1 |
| cvAtmPeerCfgInBandSignaling This object specifies the type of in-band signaling
used between the two end points of the call and is used
by the router to determine how to interpret the ABCD
signaling bits sen… | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcInBandSignaling | .1.3.6.1.4.1.9.10.35.1.3.1.1.10 |
| cvAtmPeerCfgVADEnable This object specifies whether or not VAD (Voice Activity
Detection) is enabled. If the object value is 'false',
then the voice data is continuously transmitted to
ATM backbone. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.11 |
| cvAtmPeerCfgUseSeqNumbers This object specifies whether or not Sequence Numbers are
generated on voice packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.12 |
| cvAtmPeerCfgDtmfRelay This object specifies whether or not Dtmf Relay is enabled.
If it is then dtmf digits are transported as FRF11 Annex
C packets, instead of being encoded as speech. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.13 |
| cvAtmPeerCfgInterfaceName The object specifies the ifName on which the call will go
out.
A zero length string indicates that no interface has been
assigned. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.10.35.1.3.1.1.2 |
| cvAtmPeerCfgVpi The VPI used for this ATM connection. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.3 |
| cvAtmPeerCfgVci The VCI used for this ATM connection. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.4 |
| cvAtmPeerCfgCoderRate This object specifies the default voice coder rate of
speech for the ATM peer. | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate | .1.3.6.1.4.1.9.10.35.1.3.1.1.6 |
| cvAtmPeerCfgCodecBytes This object specifies the payload size for the voice
packets to be transmitted during the call. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.7 |
| cvAtmPeerCfgFaxRate This object specifies the default transmit rate of FAX
for the ATM peer. If the value of this object is 'none',
then the Fax relay feature is disabled; otherwise the
Fax relay fea… | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRate | .1.3.6.1.4.1.9.10.35.1.3.1.1.8 |
| cvAtmPeerCfgFaxBytes This object specifies the payload size for the fax
packets to be transmitted during the call. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.9 |