cvAtmPeerCfgCoderRate
CISCO-VOICE-ATM-DIAL-CONTROL-MIB ·
.1.3.6.1.4.1.9.10.35.1.3.1.1.6
Object
This object specifies the default voice coder rate of speech for the ATM peer.
Context
- MIB
- CISCO-VOICE-ATM-DIAL-CONTROL-MIB
- OID
.1.3.6.1.4.1.9.10.35.1.3.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cvAtmPeerCfgEntry
- Table
- cvAtmPeerCfgTable
- Siblings
- 12
Syntax
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate
- Source
- CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate
- Base type
Enumeration
Values & Constraints
Type Values
1 | g729r8000 |
2 | g729Ar8000 |
3 | g726r16000 |
4 | g726r24000 |
5 | g726r32000 |
6 | g711ulawr64000 |
7 | g711Alawr64000 |
8 | g728r16000 |
9 | g723r6300 |
10 | g723r5300 |
11 | gsmr13200 |
12 | g729Br8000 |
13 | g729ABr8000 |
14 | g723Ar6300 |
15 | g723Ar5300 |
16 | g729IETFr8000 |
17 | gsmeEr12200 |
18 | clearChannel |
19 | g726r40000 |
20 | llcc |
21 | gsmAmrNb |
22 | iLBC |
23 | iLBCr15200 |
24 | iLBCr13330 |
25 | g722r4800 |
26 | g722r5600 |
27 | g722r6400 |
28 | iSAC |
29 | aaclc |
30 | aacld |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cvAtmPeerCfgSessionProtocol The object specifies the session protocol to be used
for Internet call between local and remote router via
ATM backbone. | column | CvAtmSessionProtocol | .1.3.6.1.4.1.9.10.35.1.3.1.1.1 |
| cvAtmPeerCfgInBandSignaling This object specifies the type of in-band signaling
used between the two end points of the call and is used
by the router to determine how to interpret the ABCD
signaling bits sen… | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcInBandSignaling | .1.3.6.1.4.1.9.10.35.1.3.1.1.10 |
| cvAtmPeerCfgVADEnable This object specifies whether or not VAD (Voice Activity
Detection) is enabled. If the object value is 'false',
then the voice data is continuously transmitted to
ATM backbone. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.11 |
| cvAtmPeerCfgUseSeqNumbers This object specifies whether or not Sequence Numbers are
generated on voice packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.12 |
| cvAtmPeerCfgDtmfRelay This object specifies whether or not Dtmf Relay is enabled.
If it is then dtmf digits are transported as FRF11 Annex
C packets, instead of being encoded as speech. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.35.1.3.1.1.13 |
| cvAtmPeerCfgInterfaceName The object specifies the ifName on which the call will go
out.
A zero length string indicates that no interface has been
assigned. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.10.35.1.3.1.1.2 |
| cvAtmPeerCfgVpi The VPI used for this ATM connection. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.3 |
| cvAtmPeerCfgVci The VCI used for this ATM connection. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.4 |
| cvAtmPeerCfgVcName The VC Name used for this ATM connection. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.10.35.1.3.1.1.5 |
| cvAtmPeerCfgCodecBytes This object specifies the payload size for the voice
packets to be transmitted during the call. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.7 |
| cvAtmPeerCfgFaxRate This object specifies the default transmit rate of FAX
for the ATM peer. If the value of this object is 'none',
then the Fax relay feature is disabled; otherwise the
Fax relay fea… | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRate | .1.3.6.1.4.1.9.10.35.1.3.1.1.8 |
| cvAtmPeerCfgFaxBytes This object specifies the payload size for the fax
packets to be transmitted during the call. | column | Integer32 | .1.3.6.1.4.1.9.10.35.1.3.1.1.9 |