CISCO-LWAPP-MESH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

clMeshNodeTable

table

.1.3.6.1.4.1.9.9.616.1.1.1 · 1 row entry · 28 columns

Open in standard view

This table represents information about the 802.11
LWAPP Access Points that have joined the controller
as part of a mesh network.

clMeshNodeEntry entry .1.3.6.1.4.1.9.9.616.1.1.1.1

Each entry represents a conceptual row in this table.
An entry is created when MAP joins the controller.
The entry is removed when the mesh node lose their
association with the controller due to loss of
communication…

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress

Column Syntax OID

clMeshNodeRole

This object specifies the role of mesh AP which has
joined the controller. See glossary section above
for detail about MAP and RAP.
map - AP is configured as mesh.
rap - AP is configured as root.

Enumerationr/w

Enumerated Values:

1	map
2	rap

.1.3.6.1.4.1.9.9.616.1.1.1.1.1

clMeshNodeGroupName

This object specifies the group name of the mesh
sector. MAP AP will join the mesh sector which has the
same group name configured on RAP AP.

OctetStringr/w

Constraints:
range: 0-10

.1.3.6.1.4.1.9.9.616.1.1.1.1.2

clMeshNodeBackhaul

This object represents 802.11 interface type of the
backhaul link. See Mesh Link in glossary section for
more detail on backhaul link.
dot11a - 802.11a radio is used as backhaul link.
dot11b - 802.11b radio is u…

Enumeration

Enumerated Values:

1	dot11a
2	dot11b
3	dot11g

.1.3.6.1.4.1.9.9.616.1.1.1.1.3

clMeshNodeBackhaulDataRate deprecated

This object represents the rate at which packets are sent
on the backhaul link. This object has been deprecated
for clMeshNodeBHDataRate.

KbpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.1.1.4

clMeshNodeEthernetBridge

This object specifies whether ethernet bridge is
enabled or not.
A value of 'true' indicates ethernet bridging is enable
on this mesh node. A value of 'false indicates ethernet
bridging is not enable on this mesh node.…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.1.1.5

clMeshNodeEthernetLinkStatus

This object represents whetherthe link is up or down on
the ethernet port of the RAP or MAP.
up - ethernet link is up.
down - ethernet link is down.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.9.9.616.1.1.1.1.6

clMeshNodePublicSafetyBackhaul deprecated

4.9Ghz considered to be public safety band and is
limited to some service providers. A value of true
indicates that 4.9 Ghz can be used on backhaul link
by selecting channel on the 802.11a backhaul radio.
Since public …

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.1.1.7

clMeshNodeParentMacAddress

This object represents the MAC address of a parent
mesh node. In case of RAP this object will
return 0000000000000.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.9.9.616.1.1.1.1.8

clMeshNodeHeaterStatus

This object represents the heater status of the
mesh node.
on - heater is in operation
off - heater is not operation.

PercentEnumeration

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.9.9.616.1.1.1.1.9

clMeshNodeInternalTemp

This object represents the internal temperature
of mesh node in celsius.

degree CelsiusSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.616.1.1.1.1.10

clMeshNodeType

This object represents the type of mesh node.
indoor - Mesh node which is manufactured to be used
inside the building.
outdoor - Mesh node which can be used outside building
in open environment.

Enumeration

Enumerated Values:

1	indoor
2	outdoor

.1.3.6.1.4.1.9.9.616.1.1.1.1.11

clMeshNodeHops

This object represents the number of hops a MAP mesh node
is from RAP. When the clMeshNodeRole is set to 'RAP' this
object will return a value of zero.

hopsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.1.1.12

clMeshNodeChildCount

This object represents the number of children MAPs of a RAP or
a MAP.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.1.1.13

clMeshNodeBackhaulRadio

This object specifies the type of radio used for backhaul
access.
unknown (1) unsupported APs
dot11bg (2) The value dot11b sets the 802.11b radio as
backhaul radio
dot11a (3) The value dot11a sets th…

Enumerationr/w

Enumerated Values:

1	unknown
2	dot11bg
3	dot11a

.1.3.6.1.4.1.9.9.616.1.1.1.1.14

clMeshNodeBHDataRate

This object specifies the rate at which packets are sent
on the backhaul link. Depending on the backhaul radio type,
denoted by clMeshNodeBackhaul object, data rate will vary.

If the value of clMeshNodeBa…

Enumerationr/w

Enumerated Values:

1	mbps1
2	mbps2
3	mbps5point5
4	mbps6
5	mbps9
6	mbps11
7	mbps12
8	mbps18
9	mbps24
10	mbps36
11	mbps48
12	mbps54
13	auto
14	htMcs0
15	htMcs1
16	htMcs2
17	htMcs3
18	htMcs4
19	htMcs5
20	htMcs6
21	htMcs7
22	htMcs8
23	htMcs9
24	htMcs10
25	htMcs11
26	htMcs12
27	htMcs13
28	htMcs14
29	htMcs15
30	htMcs16
31	htMcs17
32	htMcs18
33	htMcs19
34	htMcs20
35	htMcs21
36	htMcs22
37	htMcs23
38	vhtMcs0Ss1
39	vhtMcs1Ss1
40	vhtMcs2Ss1
41	vhtMcs3Ss1
42	vhtMcs4Ss1
43	vhtMcs5Ss1
44	vhtMcs6Ss1
45	vhtMcs7Ss1
46	vhtMcs8Ss1
47	vhtMcs9Ss1
48	vhtMcs0Ss2
49	vhtMcs1Ss2
50	vhtMcs2Ss2
51	vhtMcs3Ss2
52	vhtMcs4Ss2
53	vhtMcs5Ss2
54	vhtMcs6Ss2
55	vhtMcs7Ss2
56	vhtMcs8Ss2
57	vhtMcs9Ss2
58	vhtMcs0Ss3
59	vhtMcs1Ss3
60	vhtMcs2Ss3
61	vhtMcs3Ss3
62	vhtMcs4Ss3
63	vhtMcs5Ss3
64	vhtMcs6Ss3
65	vhtMcs7Ss3
66	vhtMcs8Ss3
67	vhtMcs9Ss3
65535	default

.1.3.6.1.4.1.9.9.616.1.1.1.1.15

clMeshDaisyChainEnabled

This object specifies whether an AP
operating in mesh mode has daisy chaining mode
enabled. A daisy chain is a wiring scheme in
which multiple devices are wired together in
sequence or in a ring.
A value of 'true' ind…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.1.1.16

clMeshPrefParentMacAddress

This object represents the MAC address of the
preferred parent for this mesh node.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.9.9.616.1.1.1.1.17

clMeshNodeBGNStrictMatch

This object specifies whether an AP
operating in mesh mode needs to have
needs to have strict bridge group matching
enabled or not.
A value of 'true' indicates that strict bridge group
name matching is enabled.
A valu…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.1.1.18

clMeshNodeVlanEnabled

This object specifies whether an AP
operating in mesh mode has VLAN support
enabled. If flexconnect local switching is
enabled, it will return the same value as
cLReapApVlanEnable.
A value of 'true' indicates VLAN suppo…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.1.1.19

clMeshNodeNativeVlanId

This object specifies the native VLAN ID
configured on the AP. If flexconnect local switching is
enabled, it will return the same value as
cLReapApNativeVlanId.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.1.1.20

clMeshNodePskKeyClear

This object specifies clearing of PSK key.
A value of 'true' indicates PSK key will be cleared.
A value of 'false' indicates PSK key wont be cleared.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.1.1.21

clMeshNodeRAPDownlinkBackhaul

This objects specifies the current backhaul slot of the RAP.
And also used to configure/change the backhaul slot of the RAP.
slot0 - downlink backhaul access for slot 0 enabled.
slot1 - downlink backhaul access for slot…

Enumerationr/w

Enumerated Values:

0	unknown
1	slot0
2	slot1

.1.3.6.1.4.1.9.9.616.1.1.1.1.22

clMeshNodeBlockChild

This object specifies Block Child state for the AP.
A value of 'true' indicates block child state is enabled.
A value of 'false' indicates block child state is disabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.1.1.23

clMeshNodeBhaulDataRateType

This object specifies the backhaul tx data rate type for Mesh
AP. And also used to configure/change the mesh backhaul data
rate for AP.
auto - Backhaul tx rate is automatically selected
dot11abg - Backhaul tx rate is 80…

Enumerationr/w

Enumerated Values:

1	auto
2	dot11abg
3	dot11nMcs
4	dot11acMcs
5	dot11axMcs

.1.3.6.1.4.1.9.9.616.1.1.1.1.24

clMeshNodeBhaulDataRate

This object specifies the backhaul tx rate in kbps
Backhaul tx rate is one of 1000, 2000, 5500,
11000, 6000, 9000, 12000, 18000, 24000, 36000, 48000, 54000

Enumerationr/w

Enumerated Values:

1	auto
1000	mbps1
2000	mbps2
5500	mbps5point5
6000	mbps6
9000	mbps9
11000	mbps11
12000	mbps12
18000	mbps18
24000	mbps24
36000	mbps36
48000	mbps48
54000	mbps54

.1.3.6.1.4.1.9.9.616.1.1.1.1.25

clMeshNodeBhaulDataRateMcsIndex

This object specifies the backhaul tx rate 802.11n/ac mcs index
Backhaul mcs index is between 0 to 31 for 802.11n and 0 to 9
for 802.11ac.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.1.1.26

clMeshNodeBhaulDataRateDot11acSpatialStream

This object specifies the backhaul rate 802.11ac spatial stream
value of backhaul rate spatial stream is between 1 to 4.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.1.1.27

clMeshNodeBhaulDataRateDot11axSpatialStream

This object specifies the backhaul rate 802.11ax spatial stream
value. Range of 1 - 4 for 802.11bg and 1 - 8 for 802.11 radio.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.1.1.28

clMeshPskTable

table

.1.3.6.1.4.1.9.9.616.1.1.2 · 1 row entry · 5 columns

Open in standard view

This table represents information about the PSK Keys
configured on the WLC for the MESH AP authentication.

clMeshPskEntry entry .1.3.6.1.4.1.9.9.616.1.1.2.1

Each entry in this table represents the
information about PSK Key.

Indexes

clMeshPskIndex

Column Syntax OID

clMeshPskIndex

This object uniquely identifies the one instance of the PSK.
Maximum five entries are maintained. For each key configuration
old key will be pushed down and new key will be placed at top.
After fifth key configuration…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.2.1.1

clMeshPskKey

This object specifies the pre-shared
key used for authenticating mesh AP during joining process.

OctetStringr/w

Constraints:
range: 3-32

.1.3.6.1.4.1.9.9.616.1.1.2.1.2

clMeshPskTimeStamp

This object specifies the time when the
PSK key was configured on WLC.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.616.1.1.2.1.3

clMeshPskKeyDesc

This object specifies the description for the pre-shared key.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.9.9.616.1.1.2.1.4

clMeshPskRowStatus

This object specifies the status column for this row and used
to create and delete specific instances of rows
in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.616.1.1.2.1.5

clMeshProfileTable

table

.1.3.6.1.4.1.9.9.616.1.1.3 · 1 row entry · 34 columns

Open in standard view

This table lists the configuration for each
Mesh profile.

clMeshProfileEntry entry .1.3.6.1.4.1.9.9.616.1.1.3.1

An entry containing the configuration attributes
that affect the operation of Mesh Access points.
Entries can be added/deleted by explicit management
action from NMS/EMS or through user console.

Indexes

cLMeshProfileName

Column Syntax OID

cLMeshProfileName

This object uniquely identifies a Mesh Profile.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.9.9.616.1.1.3.1.1

cLMeshProfileDescr

This object specifies a human-readable description
of the profile.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.9.9.616.1.1.3.1.2

cLMeshProfileASTools

This object specifies if anti-stranding tools are
enabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.3

cLMeshProfileAmsdu

This object specifies if aggregation of MSDU is
enabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.4

cLMeshProfileBackgroundScan

This object specifies if background scanning is
enabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.5

cLMeshProfileCcnMode

This object specifies if change channel
notification needs to be sent or not by
parent AP to all its children when parent
AP changes channel

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.6

cLMeshProfileUniversalAccess

This object specifies if client can
connect to backhaul radio or not.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.7

cLMeshProfileEtherVlanTransparent

This object specifies the vlan transparent mode
status. Vlan transparent mode will allow all the
VLANs on secondary ethernet interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.8

cLMeshProfileFullSectorDfs

This object specifies whether DFS is enabled or
not in Mesh network.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.9

cLMeshProfileIdsState

This object specifies if Ids reporting is enabled or
not for Mesh APs.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.10

cLMeshProfileMulticastMode

This object specifies multicast mode for ethernet
bridged clients.

Enumerationr/w

Enumerated Values:

1	modeRegular
2	modeIn
3	modeOut

.1.3.6.1.4.1.9.9.616.1.1.3.1.11

cLMeshProfileRange

This object specifies the optimal distance in feet
between RAP and MAP for backhaul link without
degrading SNR value.

feetSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.3.1.12

cLMeshProfileSecurityMode

This object specifies authentication mode of RAP and
MAP mesh nodes in controller.
none - no authentication is done.
psk - pre shared key. Keys provided during manufacturing
will be used for authentication of me…

Enumerationr/w

Enumerated Values:

1	eap
2	psk

.1.3.6.1.4.1.9.9.616.1.1.3.1.13

cLMeshProfileConvergenceMethod

This object specifies convergence method used by AP
during link failure.

Enumerationr/w

Enumerated Values:

1	standard
2	fast
3	veryFast
4	noiseTolerentFast

.1.3.6.1.4.1.9.9.616.1.1.3.1.14

cLMeshProfileLscOnlyAuthentication

This object specifies status of
cLMeshProfileLscOnlyAuthentication

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.15

cLMeshProfileBridgeGroupName

This object indicates bridge group name configured
for mesh APs.

OctetStringr/w

Constraints:
range: 0-10

.1.3.6.1.4.1.9.9.616.1.1.3.1.16

cLMeshProfileBGNStrictmatch

This object specifies whether an AP
operating in mesh mode needs to have
strict bridge group matching enabled
or not.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.17

cLMeshProfileEthernetBridging

This object specifies whether ethernet bridging is
enabled or not.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.18

cLMeshProfileBatteryState

This object specifies if battery state
will be updated by AP or not.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.1.3.1.19

cLMeshProfileAuthorizationMethod

This object specifies authorization method for
mesh APs.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.9.9.616.1.1.3.1.20

cLMeshProfileAuthenticationMethod

This object specifies authentication method for
mesh APs.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.9.9.616.1.1.3.1.21

cLMeshProfileDot11bgBhaulRateType

This object specifies mesh backhaul data rate type
for 802.11bg backhaul radio

Enumerationr/w

Enumerated Values:

1	auto
2	dot11abg
3	dot11nMcs
4	dot11axMcs

.1.3.6.1.4.1.9.9.616.1.1.3.1.22

cLMeshProfileDot11bgBhaulRate

This object specifies the 802.11bg data rate for
Mesh backhaul tx traffic.

Enumerationr/w

Enumerated Values:

1	auto
1000	mbps1
2000	mbps2
5500	mbps5point5
6000	mbps6
9000	mbps9
11000	mbps11
12000	mbps12
18000	mbps18
24000	mbps24
36000	mbps36
48000	mbps48
54000	mbps54

.1.3.6.1.4.1.9.9.616.1.1.3.1.23

cLMeshProfileDot11bgBhaulRateDot11nMcsIndex

This object specifies the 802.11n mcs index for
Mesh backhaul tx traffic with 802.11bg radio

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.3.1.24

cLMeshProfileDot11aBhaulRateType

This object specifies mesh backhaul data rate type
for 802.11a backhaul radio.

Enumerationr/w

Enumerated Values:

1	auto
2	dot11abg
3	dot11nMcs
4	dot11acMcs
5	dot11axMcs

.1.3.6.1.4.1.9.9.616.1.1.3.1.25

cLMeshProfileDot11aBhaulRate

This object specifies the 802.11a data rate for
Mesh backhaul tx traffic.

Enumerationr/w

Enumerated Values:

1	auto
6000	mbps6
9000	mbps9
12000	mbps12
18000	mbps18
24000	mbps24
36000	mbps36
48000	mbps48
54000	mbps54

.1.3.6.1.4.1.9.9.616.1.1.3.1.26

cLMeshProfileDot11aBhaulRateDot11nMcsIndex

This object specifies the 802.11n mcs index for
Mesh backhaul tx traffic with 802.11a radio.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.3.1.27

cLMeshProfileDot11aBhaulRateDot11acMcsIndex

This object specifies the 802.11ac mcs index for
Mesh backhaul tx traffic with 802.11a radio.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.3.1.28

cLMeshProfileDot11aBhaulRateDot11acSpatialStream

This object specifies the 802.11ac mcs spatial stream for
Mesh backhaul tx traffic with 802.11a radio.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.616.1.1.3.1.29

clMeshProfileRowStatus

This object specifies the status column for this row and used
to create and delete specific instances of rows
in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.616.1.1.3.1.30

cLMeshProfileDot11bgBhaulRateDot11axMcsIndex

This object specifies the 802.11ax mcs index for
Mesh backhaul tx traffic with 802.11bg radio.

Unsigned32r/w

Constraints:
range: 0-11

.1.3.6.1.4.1.9.9.616.1.1.3.1.31

cLMeshProfileDot11bgBhaulRateDot11axSpatialStream

This object specifies the 802.11ax mcs spatial stream for
Mesh backhaul tx traffic with 802.11bg radio.

Unsigned32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.9.9.616.1.1.3.1.32

cLMeshProfileDot11aBhaulRateDot11axMcsIndex

This object specifies the 802.11ax mcs index for
Mesh backhaul tx traffic with 802.11a radio.

Unsigned32r/w

Constraints:
range: 0-11

.1.3.6.1.4.1.9.9.616.1.1.3.1.33

cLMeshProfileDot11aBhaulRateDot11axSpatialStream

This object specifies the 802.11ax mcs spatial stream for
Mesh backhaul tx traffic with 802.11a radio.

Unsigned32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.9.9.616.1.1.3.1.34

clMeshNeighborTable

table

.1.3.6.1.4.1.9.9.616.1.3.1 · 1 row entry · 5 columns

Open in standard view

This table represents information about neighbors
of any mesh node. Neighbor AP can be on same or
different mesh sector. Any mesh node is neighbor of a 
mesh node, if it can detect 802.11 signals on any 
channels. Child or parent mesh node also considers as 
neighbors.

clMeshNeighborEntry entry .1.3.6.1.4.1.9.9.616.1.3.1.1

An (conceptual) entry in this table is created when
mesh node detects neighbor mesh nodes.
Entries are removed when the mesh node does not detect
AP as neighbor.

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress clMeshNeighborMacAddress

Column Syntax OID

clMeshNeighborMacAddress

This object represents MAC address of neighbor
mesh node.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.9.9.616.1.3.1.1.1

clMeshNeighborType

This object represents type of neighbor mesh node.
parent - Neighbor mesh node is a parent mesh node
of this mesh node.
neighbor - Its a neighbor mesh node. It can be on
same or different mesh-…

Bits

Enumerated Values:

0	parent
1	neighbor
2	excluded
3	child
4	beacon
5	default

.1.3.6.1.4.1.9.9.616.1.3.1.1.2

clMeshNeighborLinkSnr

This object represents the SNR value seen by this mesh
node from neighbor mesh node.

dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.616.1.3.1.1.3

clMeshNeighborChannel

This object represents the channel on which neighbor
mesh node is operating.

CISCO-LWAPP-TC-MIBCLDot11Channel

Textual Convention: CISCO-LWAPP-TC-MIBCLDot11Channel Unsigned32

Type Constraints:
range: 1..14
range: 34
range: 36
range: 38
range: 40
range: 42
range: 44
range: 46
range: 48
range: 52
range: 56
range: 60
range: 64
range: 149
range: 153
range: 157
range: 161

.1.3.6.1.4.1.9.9.616.1.3.1.1.4

clMeshNeighborUpdate

This object represents when the neighbor table was last
updated. This value is represented as a instance of
sysUp time.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.616.1.3.1.1.5

clMeshAtfStatsTable

table

.1.3.6.1.4.1.9.9.616.1.3.2 · 1 row entry · 6 columns

Open in standard view

This table represents ATF mesh stats for all the
RAPs/PMAPs having one or more child mesh nodes.

clMeshAtfStatsEntry entry .1.3.6.1.4.1.9.9.616.1.3.2.1

An (conceptual) entry in this table is created when
mesh node detects neighbor mesh nodes having the ATF enabled.
Entries are removed when the mesh node does not detect
AP as neighbor.

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress clMeshNeighborMacAddress

Column	Syntax	OID
clMeshAtfAirtimeUsedInstantaneous This object represents the instantaneous air time used.	MicrosecondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.616.1.3.2.1.1`
clMeshAtfAirtimeUsedCumulative This object represents the cumulative air time used.	MicrosecondsCISCO-TCUnsigned64 Textual Convention: CISCO-TCUnsigned64 `Unsigned64`	`.1.3.6.1.4.1.9.9.616.1.3.2.1.2`
clMeshAtfFramesSentInstantaneous This object represents number of bytes sent to its neighbor mesh nodes.	bytesSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.616.1.3.2.1.3`
clMeshAtfFramesSentCumulative This object represents number of bytes sent cumulative to its neighbor mesh nodes.	bytesCISCO-TCUnsigned64 Textual Convention: CISCO-TCUnsigned64 `Unsigned64`	`.1.3.6.1.4.1.9.9.616.1.3.2.1.4`
clMeshAtfFramesDroppedInstantaneous This object represents number of frames dropped instantaneous to its neighbor mesh nodes(parent/child).	bytesSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.616.1.3.2.1.5`
clMeshAtfFramesDroppedCumulative This object represents number of frames dropped cumulative to its neighbor mesh nodes.	bytesCISCO-TCUnsigned64 Textual Convention: CISCO-TCUnsigned64 `Unsigned64`	`.1.3.6.1.4.1.9.9.616.1.3.2.1.6`

clMeshGpsInfoTable

table

.1.3.6.1.4.1.9.9.616.1.6.1 · 1 row entry · 6 columns

Open in standard view

This table represents information about location and
velocity parameters received from the GPS module on the
LWAPP Access Points that have joined the controller
as part of a mesh network.

clMeshGpsInfoEntry entry .1.3.6.1.4.1.9.9.616.1.6.1.1

Indexes

CISCO-LWAPP-AP-MIBcLApSysMacAddress

Column Syntax OID

clMeshGpsLocationPresent deprecated

This object indicates whether the access point
has the GPS module installed or not.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.6.1.1.1

clMeshGpsLocationValid deprecated

This object indicates whether the location
information is valid or not.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.616.1.6.1.1.2

clMeshGpsLatitude deprecated

This object represents latitude information
in the GPS data received.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.616.1.6.1.1.3

clMeshGpsLongitude deprecated

This object represents longitude information
in the GPS data received.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.616.1.6.1.1.4

clMeshGpsAltitude deprecated

This object represents altitude information
in the GPS data received.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.616.1.6.1.1.5

clMeshGpsCollectionTime deprecated

This object represents the time when GPS
data was collected.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.616.1.6.1.1.6