clMeshNodeGroupName
CISCO-LWAPP-MESH-MIB ·
.1.3.6.1.4.1.9.9.616.1.1.1.1.2
Object
column
r/w
OctetString
This object specifies the group name of the mesh sector. MAP AP will join the mesh sector which has the same group name configured on RAP AP.
Context
- MIB
- CISCO-LWAPP-MESH-MIB
- OID
.1.3.6.1.4.1.9.9.616.1.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- clMeshNodeEntry
- Table
- clMeshNodeTable
- Siblings
- 27
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clMeshNodeRole This object specifies the role of mesh AP which has
joined the controller. See glossary section above
for detail about MAP and RAP.
map - AP is configured as mesh.
rap - AP is co… | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.1 |
| clMeshNodeInternalTemp This object represents the internal temperature
of mesh node in celsius. | column | degree Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.616.1.1.1.1.10 |
| clMeshNodeType This object represents the type of mesh node.
indoor - Mesh node which is manufactured to be used
inside the building.
outdoor - Mesh node which can be used outside b… | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.11 |
| clMeshNodeHops This object represents the number of hops a MAP mesh node
is from RAP. When the clMeshNodeRole is set to 'RAP' this
object will return a value of zero. | column | hops SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.616.1.1.1.1.12 |
| clMeshNodeChildCount This object represents the number of children MAPs of a RAP or
a MAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.616.1.1.1.1.13 |
| clMeshNodeBackhaulRadio This object specifies the type of radio used for backhaul
access.
unknown (1) unsupported APs
dot11bg (2) The value dot11b sets the 802.11b radio as
backhaul radi… | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.14 |
| clMeshNodeBHDataRate This object specifies the rate at which packets are sent
on the backhaul link. Depending on the backhaul radio type,
denoted by clMeshNodeBackhaul object, data rate will vary.
… | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.15 |
| clMeshDaisyChainEnabled This object specifies whether an AP
operating in mesh mode has daisy chaining mode
enabled. A daisy chain is a wiring scheme in
which multiple devices are wired together in
sequ… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.1.1.16 |
| clMeshPrefParentMacAddress This object represents the MAC address of the
preferred parent for this mesh node. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.616.1.1.1.1.17 |
| clMeshNodeBGNStrictMatch This object specifies whether an AP
operating in mesh mode needs to have
needs to have strict bridge group matching
enabled or not.
A value of 'true' indicates that strict bridge… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.1.1.18 |
| clMeshNodeVlanEnabled This object specifies whether an AP
operating in mesh mode has VLAN support
enabled. If flexconnect local switching is
enabled, it will return the same value as
cLReapApVlanEnable… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.1.1.19 |
| clMeshNodeNativeVlanId This object specifies the native VLAN ID
configured on the AP. If flexconnect local switching is
enabled, it will return the same value as
cLReapApNativeVlanId. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.1.1.20 |
| clMeshNodePskKeyClear This object specifies clearing of PSK key.
A value of 'true' indicates PSK key will be cleared.
A value of 'false' indicates PSK key wont be cleared. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.1.1.21 |
| clMeshNodeRAPDownlinkBackhaul This objects specifies the current backhaul slot of the RAP.
And also used to configure/change the backhaul slot of the RAP.
slot0 - downlink backhaul access for slot 0 enabled.
s… | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.22 |
| clMeshNodeBlockChild This object specifies Block Child state for the AP.
A value of 'true' indicates block child state is enabled.
A value of 'false' indicates block child state is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.1.1.23 |
| clMeshNodeBhaulDataRateType This object specifies the backhaul tx data rate type for Mesh
AP. And also used to configure/change the mesh backhaul data
rate for AP.
auto - Backhaul tx rate is automatically se… | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.24 |
| clMeshNodeBhaulDataRate This object specifies the backhaul tx rate in kbps
Backhaul tx rate is one of 1000, 2000, 5500,
11000, 6000, 9000, 12000, 18000, 24000, 36000, 48000, 54000 | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.25 |
| clMeshNodeBhaulDataRateMcsIndex This object specifies the backhaul tx rate 802.11n/ac mcs index
Backhaul mcs index is between 0 to 31 for 802.11n and 0 to 9
for 802.11ac. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.1.1.26 |
| clMeshNodeBhaulDataRateDot11acSpatialStream This object specifies the backhaul rate 802.11ac spatial stream
value of backhaul rate spatial stream is between 1 to 4. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.1.1.27 |
| clMeshNodeBhaulDataRateDot11axSpatialStream This object specifies the backhaul rate 802.11ax spatial stream
value. Range of 1 - 4 for 802.11bg and 1 - 8 for 802.11 radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.1.1.28 |
| clMeshNodeBackhaul This object represents 802.11 interface type of the
backhaul link. See Mesh Link in glossary section for
more detail on backhaul link.
dot11a - 802.11a radio is used as backha… | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.3 |
| clMeshNodeBackhaulDataRate deprecated This object represents the rate at which packets are sent
on the backhaul link. This object has been deprecated
for clMeshNodeBHDataRate. | column | Kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.1.1.4 |
| clMeshNodeEthernetBridge This object specifies whether ethernet bridge is
enabled or not.
A value of 'true' indicates ethernet bridging is enable
on this mesh node. A value of 'false indicates ethernet
b… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.1.1.5 |
| clMeshNodeEthernetLinkStatus This object represents whetherthe link is up or down on
the ethernet port of the RAP or MAP.
up - ethernet link is up.
down - ethernet link is down. | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.6 |
| clMeshNodePublicSafetyBackhaul deprecated 4.9Ghz considered to be public safety band and is
limited to some service providers. A value of true
indicates that 4.9 Ghz can be used on backhaul link
by selecting channel on t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.1.1.7 |
| clMeshNodeParentMacAddress This object represents the MAC address of a parent
mesh node. In case of RAP this object will
return 0000000000000. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.616.1.1.1.1.8 |
| clMeshNodeHeaterStatus This object represents the heater status of the
mesh node.
on - heater is in operation
off - heater is not operation. | column | Percent Enumeration | .1.3.6.1.4.1.9.9.616.1.1.1.1.9 |